The printer with automatic duplex A5

I am looking for a monochrome laser printer A4, with automatic duplex and network.
Additionally, the printer must be able to auto-duplex printing on A5.
Monthly print up to 5,000 pages.

Thanks. It worked! It sure seems like a complicated way to go about duplexing that takes only one step with every other source but Word, though, doesn't it? Anyway, that's not your problem and you solved mine. Much appreciated.

Similar Messages

My iMac is networked to a brother printer with automatic duplexing capability. It will double-side documents from all sources except from Word. I can't find anywhere in Word to change the settings. Any advice?

My iMac is networked to a Brother Printer that is capable of duplex printing. I can print duplexed documents from every source so far except Word. Nothing in the pre-print dialogue boxes gives me the choice to double side. In the same place that I am given the choice to double-side when printing from other sources, Word only offers 'collated'. Any advice?

Thanks. It worked! It sure seems like a complicated way to go about duplexing that takes only one step with every other source but Word, though, doesn't it? Anyway, that's not your problem and you solved mine. Much appreciated.

HP laserjet 1200 using windows7, cabled to the printer with a usb to parallel adapter

HP laserjet 1200 using windows7. My computer has USB ports, but no parallel port, so the computer is cabled to the printer with a usb to parallel adapter. Sometimes works fine, sometimes system states printer as ready, but will not print. Reboot hardware and on restart, I got one page to print. Next attempt to print puts the document in cue, but just sits there -- no error message. Finally, after multiple restarts, I got it to print (have no idea how), but now I had to print 20 pages one page at a time. It will not print more than one page, even if I select to print 20. Next time I start the computer I don't know if the printer will print. Do you need to use the same USB port each time, Or are the USB to parallel adapters undependable?
This question was solved.
View Solution.

Hey renradd!
Unfortunately, parallel to USB adapters can be undependable. Other than a new printer, I'm not sure what would provide you with a fix for this problem. You might try another adapter if you have one, but if that still doesn't work I would look into a printer that your computer could support.
Hope this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

I am having problem with trying to install the printer with wireless connection.i have windows 7

the blue light on top of the printer blinks very fast and intermitenly. i cannot install the printer with wireless. I tried with the CD that came with the printer but the green install bar just stops and freezes. I have a 4 month old Dell laptop. Printer just purchased from HP is Laser Jet Professional P1102w.

Are there any third party firewalls installed (e.g. Kaspersky, Norton, BitDefender, etc.)? It sounds like something is blocking the software and third party firewalls have been known to block communication with the printer.
How far in the installation process do you get (what options are you able to get to)?
Is the USB cable connected at the start of the installation?
Do you receive any errors at all? If so, what are they?
Have you tried using Smart Install? Smart Install works by connecting the USB cable to the computer. By default, you should get a prompt to run a file. Running this file starts the Smart Install process.
This video is a good guide to Smart Install.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Print with manual duplexing?

I have a HP Photosmart C6180 connected to my home network wirelessly. Under Windows, I have the option to perform a manual duplex whenever I print. What this does is it prints one side of all the pages, then a message pops up on the screen to flip the pages and reinsert them into the printer and press "ok". It's a little tedious, but it gets the job done and saves me plenty of paper.
However, I can't find if such an option exists for my Mac. The printer seems to be installed via Bonjour (it showed up under Default in Add Printer). The only option I see for duplex printing is asking me whether or not I have some sort of duplex printing accessory installed, which I don't have. Anyway I could get the manual duplex option for my Mac?

If you check your print dialog, you may have an entry called Paper Handling. This has a menu item called Pages to Print and this lets you choose Odd or Even only.
If you selected to print Odd Only first, then only pages 1,3,5,7,etc would be printed on the front side. You could then load the pages back into the printer, obviously with the blank side facing the correct orientation, and then select to print again, this time selecting Even Only.

Printing problem when PDF is sent to the printer with certain fonts - missing text

I'm running into a printing problem when PDFs containing certain characters of the Calibri font are used. The text in large sections of the PDF is missing on the paper version, but the text is there on the screen. It's also happened when the PDFs we created were e-mailed out to a client and printed on their printer. The problem is not present when printing directly from the programs (Microsoft Word, Excel, Visio, etc.). I've been trying to get tech support from Adobe on this, but every time I call they apologize and say they will call back in 4-6 hours with an answer. Same result each time, no call back. If anyone from Adobe is listening, it's case number 184891587. The font appears as an embedded subset when I look at the document properties. Sometimes deleting one or two Characters allows for larger text blocks to be printed - i.e. removing a long dash in bold from the heading of a paragraph makes the paragraph reappear when printed to paper from PDF. In all cases the PDF appears correct on the screen. Printing as an image allows the text to appear, but the image quality isn't acceptable for small text, even at the 600 dpi setting on the printer. If the PDF is sent out by e-mail, we do not have control over the end-user's printer setup anyway, so we need this to work in all cases.
The setup/process I'm using is as follows:
Windows 7 Professional SP1 64-Bit
Microsoft Office 2013 - problem is present when printing documents from Word, Excel or Visio. Even other variations on documents.
I've tried Acrobat versions 11.0.0 to 11.0.5 as well as Acrobat Pro 11.0.0 and 11.0.1. Same Result
Printing to Adobe PDF as the printer, from the third party application
Printing to a Xerox printer from PDF using Acrobat - Text missing
Client prints to Konica printer - Text missing
I print to the wide-format Ricoh (which also does 11x17) and the text is present.
Is there something I'm missing? Is the entire font not getting embedded into the PDF file? I noticed that rolling back to a much older version of the Calibri font (1.02 compared to 5.72) makes the problem mostly go away, but it's not completely gone. Is it possible the font is too large to be completely embedded? Where can I go from here?

Success! At least for now. It looks like my problem was fixed with Adobe's most recent update, 11.0.06. From the release notes:
PDF creation
Added support for Lotus Notes 9.
Added support for WebCapture in IE 11.
Added support for conversions from AutoCAD 2013.
3652540 A blank pdf is created for files having hidden visual style.
3601108 Flow Chart converts as a multicolored square.
3654345 Word documents missing parts of images in conversion to PDF.
3654572 Temporary file size increases when creating pdf by combining multiple files into one PDF.
3670155 PDF file created with Distiller XI prints incorrectly to some printers. (Emphasis mine)
3599407 Checkbox check marks do not appear in these files.
3663233 IE Web Capture in localized OS: Icons and drop-down menu items are missing and conversion dialog is not localized.
3651931 Chrome Only: Few web pages when converted to pdf from Chrome plugin doesn’t show up the Save As dialog.
3597910 EPM Mode On: Web capture is not working on Windows 8-32 bit when cache folder is missing.
3610644 Firefox 23.0: With Firefox version 23.0 (latest), the WebCapture icon shows up very dim as if it is disabled.
3650244 ODA falis to convert DWG files to PDF for large files.
I don't know if that's definately what solved the problem, but it sure sounds similar and this is the update that made the printing problem go away. We can't get the PDFs to fail at this point with our printers, even with Calibri 5.72. I'll come back to thread if we have printing problems at the end-user locations.

Having problem with the printer with type "PDF Publisher"

Hi,
We are having problem with printing PDF reports with print style as "PDF Publishrer". The concurrent program errors out after it generates the report. But when we try that with style "PORTRAIT" then it prints successfully. We have tried with a number of printers and a number of reports. The results are same. So my understanding is it has something to do with the printer configuration from the EBS side.
Any help in this regard is highly appreciated.
Pratap

Hi Hussein ,
Thanks for the response. The details are provided below.
The application is R12.1, Database 11.1.0.7, OS is Solaris 10.
The database characterset is US7ASCII.
The printer type is --PASTA Universal Printer Type
The log file does not give any error but the program completes with error. I am coping the log file below.
Receivables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RAXINV_SEL module: Invoice Print Selected Invoices
Current system time is 20-JUN-2011 14:23:10
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_trx_number_low='10100'
p_trx_number_high='10100'
p_open_invoice='Y'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='1'
p_debug_flag='N'
p_message_level='10'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SEL
MSG-00100: DEBUG: Choice is other than ADJ, setting ORDER BY.
MSG-00100: DEBUG: AfterPForm_Trigger -
MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 96
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 10100
MSG-00010: 14:23 1 Transaction: 10100
Report Builder: Release 10.1.2.3.0 - Production on Mon Jun 20 14:23:26 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 895365 on node PAUPRJ01 at 20-JUN-2011 14:23:48.
Post-processing of request 895365 completed at 20-JUN-2011 14:23:51.
------------- 2) PRINT   -------------
Printing output file.
Request ID : 895365
Number of copies : 1
Printer : SPOT
##################################################################

Have a MacBook Air and am connecting wirelessly to a Lexmark x4650. It sends the job to the printer but automatically cancels the print job? Can someone help?

Can someone please help me with this problem?

HP – Printer Not Found During Wireless Installation
HP – Wireless Printing Center
Network Printer Troubleshooting
Try resetting the printing system.
Reset Printing System
Ping printer: If you have the printers IP address open Terminal applications/Utilities and at the prompt type: ping {printerIP}. You will get a reply or failure.
WiFi Printer to WiFi Network - Connect

Printing with automatic pagination

At run time I'm creating an mc for printing and attaching
several labels and graphics. The height of the mc vary each time.
When I tried to print this mc using Print("mc", "bmax"); the mc is
srunk to fit the page. This is a problem, because if the mc is too
large and shrunk too much you cant read the text. I Just want it to
continue printing on the 2nd or 3rd page.
So I tried the PrintJob object. With this I can scale the mc
to fit say 2 A4 pages, but this method prints only the 1st page.
Making the mc to be cut off.
Is there any way to print an mc that is created at runtime
and varies in size to be printed on multiple pages?
Thanks for your help.

Unfortunatly I dont have the option to create the mc to fit
to a printable page. I just have an a single mc that will need to
be printed on multiple pages depending on how big it is.
I have tried to use masks for setting the print areas, but
the PrintJob always prints from the top of the mc, not from top of
the mask. Just so frustrating.
Any ideas?

TS3308 How can use the printer with iPad

How can you use the printer ( that is connected wirelessly to the same network ) with iPad

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
 Cheers, Tom

How print a page to the printer with String variable

I my name is Alexandre Lefebvre. Im in big trouble. All my program is finished. I must print only the String elements on a JTextArea to the printer (Hewllett-Packard 842c). Please help me.

Use the java 2d Api and printable interface together.
First, implement Printable Interface
your class extends XXXXX implements Printable
then use this..
public int print(Graphics g, PageFormat pf, int index)
if(index ! =0) return NO_SUCH_PAGE;
Graphics2D g2 = (Graphics2D)g;
g2.setColor(Any Color);
g2.drawString(textArea.getText());
return PAGE_EXISTS;
public void actionPerformed(ActionEvent ae)
if(ae.getSource() == printButton)
PrinterJob pj = PrinterJob.getPrinterJob();
pj.setPrintable(this);
if(pj.printDialog())
try
pj.print();
catch(Exception e){ // Handle }
This works fine for printing a single page. But you've got to use some logic and iterate the print job

WINDOWS CONNOT CONNECT TH THE PRINTER WITH WINDOWS 8.1 PRO

Windows 8: Cannot Connect to Prin

Hello PRASHANT P CHAUHAN,
Do you mean that the Windows 8.1 can’t add a printer?
Go to Control Panel\All Control Panel Items\Troubleshooting\All Categories and run the printer troubleshooter.
Please use the command ping to check if you can normally connect to the printer.
https://technet.microsoft.com/en-us/library/cc737478(v=ws.10).aspx
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Send a txt file to the printer with java

Hello,
I want to sent a txt file to the printer in java. I' am using the USB port. I can try to setup a dos command (print c:\test.txt), but I don't know the exactly command.
There is also another solution in java I thing but I don't know the code!
Can somebody give me the exact command for DOS and/or the code I have to write in java?
THANX!!!!

in dos imo you are not able to use usb-port. if your printer would be on lpt you could use javacomm ( http://java.sun.com/products/javacomm/index.html ). there is also another thread talking about this (print text to lpt). for your usb-problem i don't have a solution. but you could use JNI (java native interface). write code in c, compile to dll and use it in java.
tobias
ps: the other thread ( http://forum.java.sun.com/thread.jsp?forum=31&thread=224460 )

Scan and check the printer with Icon

I have a HP Deskjet Ink Advantage 4625 and after upgrade to Win 8.1 it´s imposible to open the Icon "HP Deskjet 4620" on my desktop HP Pavillion Slimline 400-050br. Because of this I cannot check or scan etc from the desktop but have to do it from the printers screen.
I tried many times to download the program again and tried the CD but it´s only install the basic version even if I download the full version.
If I rightclick the Icon and try to find out why it´s not working I got the answer "It´not compatible"
BR
Björn

Hello @Jocke40 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would like to help.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Are there any shortcuts to connecting the printer with web services and/or the eprint server?

(HP Officejet Pro 8600 Plus, IE, Windows 7)
As I am unable to execute the instructions given by
by Ryamond 1411, I'm looking for other avenues to connect my printer to web services and/or
the eprint server so I can release 4 emails for printout now stuck in que.

Hello MurrayJ,
The first thing I would do is follow step six in this document to set a static IP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en&product=4023246&tmp...
When it askes for DNS information, enter in Google's DNS. Preferred DNS = 8.8.8.8 Alt DNS = 8.8.4.4
If that does not help, if you could provide me with the following information it would help me out. First, who is your ISP( Internet Service Provider, i.e. Comcast, AT&T, Verizon, ect.)? Second, who is the maker of your router? Lastly, what is the model number and firmware version of your router?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

The printer with automatic duplex A5

Similar Messages

Maybe you are looking for