The Prob is def with Mac 10.5.1 Get bootcamp install XP and wireless works.

The Prob is def with Mac 10.5.1 Get bootcamp install XP and wireless works.
I have all the problems everyone is having on here as well. But you know what? I Boot into XP and wireless works fine. Apparently apple makes better drivers for Windows then there own OS I thought mac was suppose to just "work" Then to find if I login with xp it just, "works" what am i to believe now haha
I really hate using XP but its the only way I can connect to the net consistently ...
My mac is all like "Wait i found a connection..." "ok i found it" "ok let me connect" "ok im connected... but... wait not really" "i know it looks like im connected but I am going to make you sad"
It does make me sad
BTW I have tried every single option/config possible. Nothing works. BC you know what? It should just "WORK"
Ill sit humbly on xp till this gets fix but for now just wait it out

Time: This has been discussed a lot; Mac OS and Windows read your computer's clock differently. See http://discussions.apple.com/thread.jspa?messageID=6271964&#6271964
Sleep: Windows is buggy. Don't let Windows sleep. Don't even let it activate the screen saver.

Similar Messages

I am trying to update the itunes software on my Mac but I keep getting an instalation alert saying please close itunes. It is already closed, the only option then left is to quit instalation. I want the update though. . .

I am trying to update the itunes software on my Mac but I keep getting an instalation alert saying please close itunes. It is already closed, the only option then left is to quit instalation. I want the update though. Can anyone help?

Click on iTunes and do comand Q. Be sure you are quitting iTunes to finish update and not just closing the screen.

Is the dell S2240T compatible with mac

Is the dell S2240T compatible with mac?

The specs:
http://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&cs=19&sku=320-97 38
only lists Windows 8 as being compatible. Unless you can find drivers that support OSX, the touch feature will not work.

Is the CS6 Photoshop compatible with Mac BookPro OS 10.8 ? The Packet states OS Xv10.6.8 or v10.7.

Is the CS6 Photoshop compatible with Mac BookPro OS 10.8 ? The Packet states OS Xv10.6.8 or v10.7.

Yes. Those are minimum requirements, newer versions supersede them.
Mylenium

Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.

Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.

Try this:
clone your system and repair it with Disk Warrior instead
Or try a clean test system install on another drive
A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
Try to run w/o externals. MyBook included.
Is that a 7200.11 1TB? they had a lot of issues.
Run AHT off your OEM DVD.
2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current. Hopefully you have a UPS and is 1500VA unit.
When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
TimeMachine has its own bad habits, especially with Green drives and some externals.
Try to rule out everything and then add back one at a time.
And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old. Might want ATI 5870 or 5770.

I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?

I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?
i tryed with download mavericks but finally its saying a error message like cant conect to istore like that its saying and every thing is clear like internet and other stuf i tryed with 3times no progress same error pls help.. i bought this lap for my bro with his apple id only we use it now he got a new mac book pro so he gave to me so i formated and use it i use my apple id is that problem come because of changing apple id ? pls eplain

Firstly, what is the source of the 10.6.4 disc? Is it the original installation disc for your MacBook, or one 'borrowed' from another computer?
It isn't the retail version, because that's 10.6.3.
Assuming it's the correct disc (i.e. the one that shipped with your Mac), you need to boot from it again.
OK the language page.
From the installer screen, ignore the continue button, go to the menu bar and choose Disk Utility from the Utilities menu.
In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.).
Run Repair Disk. If that comes up as disk OK, click the partition tab. Select the partiton from the drop-down above the graphic; 1 partiton is all you need.
Go to the options button and ensure that the partition scheme is GUID and the file system to Mac OS Extended (Journalled). Name the partiton (usually Macintosh HD), click Apply.
When the Macintosh HD volume appears below the drive name, quit DU and see if you can then install.
If the screen after the language screen doesn't show the menu bar, it may be necessary to use another Mac to do the job with the MB in Firewire Target Disc Mode. If it won't boot in TDM, or the MB doesn't have FireWire then it's getting very difficult.

Installed CS6 and all working except Photoshop. Says application will not run on this mac despite my having the necessary system requirement of OSX 10.6.8. Can anyone help please?

installed CS6 and all working except Photoshop. Says application will not run on this mac despite my having the necessary system requirement of OSX 10.6.8. Can anyone help please?

Hi - I have opened a second log with the same date and name and am now tracking down the problem.
This seems to be the problem for me: Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5

While trimming a clip in my timeline, the entire timeline moves with my trim. How can I stop that and leave a gap in-between clips?

While trimming a clip in my timeline, the entire timeline moves with my trim. How can I stop that and leave a gap in-between clips? Also when I use my blade it only leaves a dotted line in the clip. How can I make that a solid line? I do a lot of flickering in my videos and don't need that some what of a snapping effect while I edit. Please help me someone. I believe i upgraded from FCP 10.0.1 to 10.0.3 and before it never did this.

Mark an In point and an Out point (which creates a Range) and hit the forward delete key (Replace with Gap.) On a MacBook, you'll probably need to hold down the Fn key and type the Delete key (or, I think you might be able to use Shift-Delete as the same command). On an iMac/Mac Pro keyboard, it's the key just to the left of 'end' or the next key above the left arrow key.
You can use the Range tool (hold down the R key and click drag over your clip) or the Blade tool to cut at the in and out (then select the cut and replace with gap).
You can also go into Commands > Customize (command-option-K) and assign a different key to Replace with Gap.
If you need to ripple edit the ends (cut), create a small section that is Gap, and hold down the T key while you use the mouse to click drag both ends (double sided trim cursor) of the cut.
Don't worry about the dotted line blade... That just lets you know that the frames on either side of the cut are continuous, or sequential — nothing has been moved yet. Once frames from either side of the mark have been cut, it becomes a full fledged cut resembling a separate clip.

My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

That sounds horrible. There are a number of reasons it could occur.
The first thing to do is ensure you have adequate backups, because what you describe can be a symptom of impending disk failure.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting. There are four separate parts to it; read everything first.
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Read about it here. It contains a link to download EtreCheck. Don't download it from anywhere else (such as may be found by following the results of an Internet search).
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

Using Suri asking any localised question in the UK, it responds with 'cannot help' can only use US locations etc. and in US English. Have I missed something or set something up incorrectly? I also thought it would interface with your Facebook but it just

Using Suri asking any localised question in the UK, it responds with 'cannot help' can only use US locations etc. and in US English. Have I missed something or set something up incorrectly? I also thought it would interface with your Facebook but it just comes back with a 'I can't help you with Facebook' message

Yeah, Siri - a headline feature on the iPhone 4s page - is beta at the mo.
But then anyone who's used Macs for a few years will know that most new software is pretty much still in beta when it's released anyway. Only Apple could get away with it and retain customers

When i open itunes it gives me the option to download the new version 10.3. my computer will not support 10.3. i can't by pass the download to continue with my current version of itunes. i've trashed and reinstalled 8.2.1 twice. any solutions?

When i open itunes it gives me the option to download the new version 10.3. my computer will not support 10.3. i can't by pass the download to continue with my current version of itunes. i've trashed and reinstalled 8.2.1 twice. any solutions?

I am in the same boat. I tried repeatedly to contact iTunes support, but was told each time that I had contacted the wrong deaprtment and they could not help me. There must be a way to still be able to use the iTunes store without paying for a system update. If not, I hope they will reimburse me the money I have in my acount.

I have an iMac and have been using Adobe reader successfully for sometime. Recently, however, whenever I go to sign a document on Adobe reader The document closes unexpectedly with an error statement. I have already uninstalled and reinstalled Adobe reade

I have an iMac and have been using Adobe reader successfully for sometime. Recently, however, whenever I go to sign a document on Adobe reader The document closes unexpectedly with an error statement. I have already uninstalled and reinstalled Adobe reader with no improvement. What do I do next?

Please post the full error message, plus OS and Reader versions.

When mousing over text, the cursor flickers constantly (with each letter passed) from arrow to i-beam and back. The problem occurs in both MS Word and Pages. Any idea of how to resolve this annoying problem is appreciated. System: 10.10.1

When mousing over text, the cursor flickers constantly (with every letter passed) from arrow to i-beam and back. The problem occurs in both MS Word 2011 and Pages. Any idea of how to solve this annoying problem will be much appreciated. System 10.10.1 on a MacPro (Late 2013)

The mouse is controlled by the OS so don't guess any app other than a mouse driver or OS X itself would be able to cause this sort of flicker issue.
Have you seen the following and is it what you are seeing? Maybe you could make a movie (Quicktime is great for this this to make a screen recording) - but not sure how to attach a movie to these discussions as mine is grayed out and can't be selected (to the right of the insert image). Here is the what I found for a search of "mouse cursor flickers os x yosemite"
https://www.youtube.com/watch?v=ZNQ0D84DdF4
What kind of mouse are you using? Is the mouse driver up to date if it's a third party mouse?

I do not have the icloud icon on my mac I have something that says mobile me and it does not accept my apple credentials

I do not have the icloud icon on my mac I have something that says mobile me and it does not accept my apple credentials. How can I get the correct icloud icon

What Mac OS X do you have? ICloud requires 10.7.2 or higher. Then the iCloud icon is in System Preferences.

I've installed Flip4Mac WMV in Lion and when I try to listen to audio in some sites, it starts playing and after about 0.5 seconds it starts playing again. So, I have the same thing playing with a delay... What is happening and how to fix it?

I've installed Flip4Mac WMV in Lion and when I try to listen to audio in some sites, it starts playing and after about 0.5 seconds it starts playing again. So, I have the same thing playing with a delay... What is happening and how to fix it? Is there any other way to play theese kinds of files without using Flip4Mac WMV?

Use Flash Media Server to stream the files.......set up a timer and have all three of them play at once....and have a button switch the streams depending upon which stream you want to play.....and wallah......
you can also capture the stream.time from the video playing and resume from that point on the other videos as well....havent done this theoretically so I dont know how smooth the transistion between streams will be....but it can be done....
plus u may have to use double buffering techniques to make sure it starts up right away......
thelegendaryghost

The Prob is def with Mac 10.5.1 Get bootcamp install XP and wireless works.

Similar Messages

Maybe you are looking for