The problem about install openssl

I want to install openssl on my mac
when I use "./config" to install openssl the terminal said "sh: make: command not found".
where is my problem?
Thanks,
Sandy

You must install the Command Line Tools with Xcode. You can download Xcode 4 in the Mac App Store. Then, you must download the Command Line Tools in Apple Developer web or Xcode preferences. You need a free Apple Developer account

Similar Messages

Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

I've got the problem about sharing the screen

Hi, i bought iMac 21.5 (Late 2013), i'v upgraded it to the Mavericks. I've got the problem about sharing the display, i have thunderbolt to hdmi adapter and while i plug it to my TV, it doesn't work, it has no signal on TV, can someone help me ?? Thank Yo

Hello Gukakila
Start your troubleshooting with the article below. Try out the cable on a different tv or monitor to see if it shows up there. You may also need to reset the SMC and Parameter Ram.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
-Norm G.

What is the problem in installing 8.1.7 on Linux

Hi
I have seen a lot of posts discussing about
problem in installing 8.1.7 on rh Linux 7.
Can anyone tell me what is the actual problem, and do I need to download any patches to resolve it ?
pam

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by pam:
Hi
I have seen a lot of posts discussing about
problem in installing 8.1.7 on rh Linux 7.
Can anyone tell me what is the actual problem, and do I need to download any patches to resolve it ?
pam<HR></BLOCKQUOTE>
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>I hava a problem in ORACLE_SID variable during installation<HR></BLOCKQUOTE>
null

The problem about x-fi elite pro's I/O conso

When i bought the x-fi elite pro,i used it on the AMD athlon64 3500+ ?ASUS ax800xt and GigaByte K8NSNXP-939 motherboard in windowsxp sp2 32bit.
After i installed it just as the quick start said,everything is fine and i like it very much.
I do think that creative had done a great job and it is the best reason to change the sb audigy2 ZS platinum pro.
But the problem comes when i change the hardware to amd AMD Athlon64 X2 4400+?Leadtek 7800GTX(single,not SLI)and ASUS A8N32-SLI motherboard.
After i changed the three things, i shut up to the older winxp pro sp2 32bit,it found a lot of newhardware,most of them are related to the nforce4 sli chipset,when it found x-fi,the system bring up blue screen and restart automaticly.
After the restart,i can startup in the system and change the settings of the x-fi(the hardware id has changed) ,and thus everything seems fine(the S750 works well),but the I/O console has no response, the blue led of the I/O console is dark.
Since then,i am in a nightmare.
I have tried a lot of ways in order to solve the problem, but it didn't work.first, i check the AD_Link carefully and everything is tight and fine,then i change the power splliter cable to another,i also plug the x-fi card into another slot and reinstall the operating system.
And now, i don't know how to solve the problem, Someone please help me.
plus,i use the newest motherboard bios 009,nforce4-sli chipset driver and 7800GTX drivers.
Eagerly for your advice.Message Edited by bravo on 0-5-2006 03:5 PM

The problem is actually about the power connector to the card (which powers the external box).
But of course is not since I forgotten to attach it
It is because the power connector is very tight, so when my friend helping me pulled out the connector, the connector?s plastic jack is also pulled out a half.
I don't notice it when I attach the power connector to it in my new computer, So the power connector can't really provide the power to the external box.
I hope someone can get some help from this thing.

The problem about settuping up the development Enviroment for OA

Hi, All
     I just began to learn the development of OA Framework, I met the problem of setting up the dev environment by using jdevelop 9i OA
extension.
     The following is steps of setting up the env by referrring to the "Oracle Application Framework Developer's guide".
     1, set the environment variable JDEV_USER_HOME to <jdeveloper dir>\jdevhome\jdev
     2. copy the DBC file from <EBS install dir>\visappl\fnd\11.5.0.\secure in EBS server to the local machine.
     3. create a tester user and assign it the responsibility "OA Framework ToolBox Turtorial" and "OA Framework ToolBox Turtorial
Labs" in EBS
     4. create a database connection. set the connection type as Oracle(JDBC), username and password as "Apps" and "Apps" , Set the
hostname and SID the same values as those specified in the DBC file. And the connection is created successfully.
     5. Then open the toolbox.jws (The sample code in the jdeveloper9i)
          i) select the tutorial.jpr , select Project > Project Setting -> Runtime Connectiong. setting the "DBC File Name" to the
DBC file path in local machine. setting the "user name" and password to EBS user I just created in step 3. Set the Application Short Name
to "AK" and Responsibility Key as "FWK_TBX_TUTORIAL".
          ii) right click tutorial.jpr. select "Edit Business Components Poject..." -> Connection . choose the Connection created in step 4.
     6. setting the same configuration for LabSolutions.jpr.
     7. After all these setting , then rebuild the toolbox.jws and run the project. It took a long time to display the test_fwktutorial.jsp and when I click the link in it. I wil get an error page. The Detail Info is the following:
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = oracle.adf.mds.exception.MDSRuntimeException; (Could not lookup message because there is no database connection) at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888) at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1145) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1960) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418) at OA.jspService(OA.jsp:40) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209) at com.evermind.server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:189) at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:199) at OA.jspService(OA.jsp:45) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803) at java.lang.Thread.run(Thread.java:534)
I'm not sure whether my configuration is set correctly. can anyboy help to figure it out, thansk in advance

r u able to connect to schema from sqlplus ??
I suspect check that first ,also see if you are able to TNS ping to the SID you have mentioned and if the port and hostname is correctly specified in ur dbc file .
here is my dbc file .. if it helps
#DB Settings
#Mon Mar 20 07:58:34 CST 2006
FND_JDBC_USABLE_CHECK=false
APPS_JDBC_DRIVER_TYPE=THIN
APPL_SERVER_ID=1EDB3E51DEE569E3E0440003BA68147136073878907234418604230042147702
TWO_TASK=IG10B
FND_JDBC_STMT_CACHE_SIZE=200
FND_JDBC_CONTEXT_CHECK=true
FND_JDBC_BUFFER_DECAY_SIZE=5
FND_JDBC_BUFFER_DECAY_INTERVAL=300
FND_JDBC_BUFFER_MAX=5
GUEST_USER_PWD=GUEST/ORACLE
FND_JDBC_STMT_CACHE_FREE_MEM=TRUE
FND_JDBC_BUFFER_MIN=1
DB_HOST=<host Name>
FND_JDBC_PLSQL_RESET=false
FNDNAM=APPS
FND_MAX_JDBC_CONNECTIONS=500
GWYUID=APPLSYSPUB/PUB
APPS_JDBC_URL=jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=maxcold)(PORT=1525)))(CONNECT_DATA=(SID=IG10B)))
DB_PORT=1525

The problem about vrrp

Dear all,I have a problem about vrrp,my core switch is cisco 3750x and huawei S5700-28C-EI, after I configured vrrp between them,the switch log got the error problem as follow:
*Jan 11 00:01:43.111: %VRRP-6-STATECHANGE: g1/0 Grp 3 state Backup -> Master
*Jan 11 00:01:43.111: VRRP: tbridge_smf_update failed
*Jan 11 00:01:44.187: VRRP: Advertisement from 10.252.200.34 has an incorrect group 10 id for interface g1/0
*Jan 11 00:01:46.539: VRRP: Advertisement from 10.252.200.36 has an incorrect group 10 id for interface g1/0
*Jan 11 00:01:50.323: VRRP: Advertisement from 10.252.200.34 has an incorrect group 10 id for interface g1/0
*Jan 11 00:01:51.707: VRRP: Advertisement from 10.252.200.36 has an incorrect group 10 id for interface g1/0
*Jan 11 00:01:52.079: VRRP: Advertisement from 10.252.200.34 has an incorrect group 10 id for interface g1/0
*Jan 11 00:01:53.079: VRRP: Advertisement from 10.252.200.34 has an incorrect group 10 id for interface g1/0
If cisco and huawei cannot interconnect with each other?

Can you post the interface config from the huawei and cisco device?
HTH,
John
*** Please rate all useful posts ***

A problem about installing javacc

i have to install JavaCC2_1, i downloaded the JavaCC2_1.zip and unzip it
but when i begin to install it ,an error appeared
# java JavaCC2_1 -c
Exception in thread "main" java.lang.NoClassDefFoundError: JavaCC2_1
and I have already set the JAVA_HOME=/usr/j2se (default by solaris 9 for sparc)
can somebody tell me why? thanks very much

Hi,
I am trying to run my first java program. Made a
simple java program of printing a output in a textpad
but when running from c:/jdk1.5.0/bin (javac aa it
gives error javac: invalid flag: aa
Usage: javac <options> <source files>) and when
giving as javac aa.java, it says cant read aa.
I guess my classpath needs to be set. Can you tell
how?The problem isn't the classpath.
You are not telling the javac command the correct location for your file aa.java.
If aa.java is in the current directory, use javac aa.java. If it's in another directory, provide the full path to the file. For example, javac \dir1\dir2\dir3\aa.java

The problem about the interMedia with JMF

I have done the following things:
1. Add jmfordim.jar into my client computer's CLASSPATH
2. Using JMFRegistry, Add "oracle.ord" into both my client's "protocol Prefix List" and "Content Prefix List" in PackageManager tab, commit on both.
My computer is a client, and the Oracle 9i database and the intermedia are installed on another server with the service name "CAO". I use the JMStudio on my computer.
But when I use the URL :"im://oci8/CAO/scott:tiger/SELECT t.aud.getcontent(), t.aud.getmimetype() FROM TAUD t WHERE n = 1 " and add into the JMStudio's OpenURL,
it can't work correctly.
Would you please tell me the reason? Thank you very much!

Can you post the error message? Or print out a java stack dump with the exception text?
There can be problems in different areas, without the error information, I cannot hope to tell you why it does not work. Perhaps you don't have the orcale JDBC driver in your path?
Larry

If there is everyone they can resolution the problem to install acrobat XI without install acrobat 8 3D

I have installed acrobat XI (Adobe CC) now there have deleted my installed version from acrobat 8 3D.
I need the 3D Toolkit from acrobat 8 3D
I have chattet 3 times with the adobe support team but there is not competent or qualified.

sorry i need a solution
and sorry they was the first answer from the support team.
The second answer was install acrobat 8 new. But the problem is acro 8 say ther is a other acro with more funktionality. ????
The third answer from support make a new adminitrativ user and install acro 8 new. This may not difference to Step2
The next answer acro 8 is does not supported. My answer i have not problem with acro 8 but i have a problem with acro XI
Next answer buy the third parity modul Tetra 4D. My answer i have buyed acro 8 3D and Adobe CC i wan't buy more software.
Answer do you have more question.
What i question the support when I thinking the answer to know. Is that the best competence from Adobe. Sorry i think better I have make a question to the parkometer

The Problem about Monitoring Motion using PCI-7358 on LabVIEW Real Time Module

Hello everyone,
I have a problem about monitoring the position of an axis. First let me give some details about the motion controller system I’m using.
I’m using PCI-7358 as controller and MID-7654 as servo driver, and I’m controlling a Maxon DC Brushed motor. I want to check the dynamic performance of the actuator system in a real time environment so I created a LabVIEW function and implemented it on LabVIEW Real Time module.
My function loads a target position (Load Target Position.vi) and starts the motion. (Start.vi) then in a timed loop I read the instantaneous position using Read Position.vi. When I graphed the data taken from the Read Position.vi, I saw that same values are taken for 5 sequential loops. I checked the total time required by Read Position.vi to complete its task and it’s 0.1ms. I arranged the loop that acquires the data as to complete its one run in 1ms. But the data shows that 5 sequential loops read the same data?

Read Position.flx can execute much faster than 5 ms but as it reads a register that is updated every 5 ms on the board, it reads the same value multiple times.
To get around this problem there are two methods:
Buffered High-Speed-Capturing (HSC)
With buffered HSC the board stores a position value in it's onboard buffer each time a trigger occurrs on the axis' trigger input. HSC allows a trigger rate of about 2 kHz. That means, you can store a position value every 500 µs. Please refer to the HSC examples. You may have to look into the buffered breakpoint examples to learn how to use a buffer, as there doesn't seem to be a buffered HSC example available. Please note that you need an external trigger-signal (e. g. from a counter of a DAQ board). Please note that the amount of position data that you can acquire in a single shot is limited to about 16.000 values.
Buffered position measurement with additional plugin-board
If you don't have a device that allows you to generate a repetitive trigger signal as required in method 1.), you will have to use an additional board, e. g. a PCI-6601. This board provides four counter/timers. You could either use this board to generate the trigger signal or you could use it to do the position capturing itself. A PCI-6601 (or an M-Series board) provides can run a buffered position acquisition with a rate of several hundred kHz and with virtually no limitation to the amount of data to be stored. You could even route the encoder signals from your 7350 to the PCI-6601 by using an internal RTSI cable (no external wiring required).
I hope this helps,
Jochen Klier
National Instruments

The problem about MouseListener,MouseMotionListener

When I compile my program I face a problem with the compiled informatioin:
XYZApp.java:137: DisplayPanel should be declared abstract; it does not define mouseDragged(java.awt.event.MouseEvent) in DisplayPanel
class DisplayPanel extends JPanel implements MouseListener,MouseMotionListener
And the DisplayPanel class is below:
class DisplayPanel extends JPanel implements MouseListener,MouseMotionListener
DisplayPanel()
     {}//constructor
//Add or remove the mouse response
     public void PanelremoveMouseListener()
          removeMouseListener(this);
     public void PanelremoveMouseMotionListener()
          removeMouseMotionListener(this);
     public void PaneladdMouseListener()
          addMouseListener(this);
     public void PaneladdMouseMotionListener()
          addMouseMotionListener(this);
     public void MouseClicked(MouseEvent e)
          JOptionPane.showMessageDialog(this,"能响应鼠标");
public void MousePressed(MouseEvent e)
public void MouseReleaseed(MouseEvent e)
public void MouseEntered(MouseEvent e)
public void MouseExited(MouseEvent e)
public void MouseDraggeded(MouseEvent e)
public void MouseMoved(MouseEvent e)
What is the problem?

When you post code, please use [code] and [/code] tags as described in Formatting Help on the message entry page. It makes it much easier to read and prevents accidental markup from array indices like [i].
Error messages are really cool; they'll generally do a real good job of telling you what's wrong. Learn to read them - it's essential you understand them if you want to improve as a programmer.

The problem of installing oracle database 9.2.0 on Redhat 7.2

Hi, there,
I meet an error when I want to run runInstaller to install oracle database 9.2.0 on Redhat 7.2 at the Oracle Database Configuration Assistant step:
ORA-03113:end-of-file on communication channel.
the installer report every other things are installed successfully except Database Configuration Assistant. but after I try to connect to database using sqlplus:
sqlplus /nolog
connect / as sysdba
after a very long responding time, there is an interior error. I don't know how to fix it. do I need reinstall the oracle or mannully configure the database? how to do that? my machine is P2 266 with 128M memory. the harddisk is 30GB. I don't know if this problem is caused by memory limitation?
besides, who knows any other forums or website about oracle database installed on linux? I found there is very limit resource about this content on oarcle website.
any hint will be great appreciated!

It could be because of the memory. Oracle 9.x requires 512 MB minimum on Linux. Also the only Red Hat Oracle is now supporting is Advanced Server. But there are workarounds.
There is an excellent web site for installing Oracle on Linux, but it has been down for the last week or two. But try it maybe next week:
www.puschitz.com

What's the Problem While Installing Oracle Express Server/Client On P-IV System

Hi,
Please let me know if there is any problem with the Pentium-4 systems while installting the Oracle Express or the Client Software. I baught a P4 system and MS Windows 200 is installed.
When I run the setup for the Oracle express server or oracle express client, Only the Hour Glass pops up for few second and nothing happens. Even there is no error message displayed.
I enquuired to one of the Local Software Service centre and was told that Oracle products are facing problm with Pentium -4 .
If it is so Please suggest me waht to do....
Regards
Rajesh

Hello,
Please repost this question in the appropriate section of the Discussion Forum.
This forum is for general suggestions and feedback about the OTN site.
You can also use our new offering called OTN Service Network:
For Oracle Advice/Minimal Support (fee based) on the Oracle Database Server, Oracle9i Application Server Containers for J2EE (OC4J), Oracle9i JDeveloper, Reports, Forums, SQL*Plus, and PL/SQL, please go to: http://www.oracle.com/go/?&Src=912386&Act=45
For customers with paid support (Metalink) please go to:
http://www.oracle.com/support/metalink
Regards,
OTN

The problem about integrate Portal and R/3

Hi everyone :
   We want to achieve that our vendor can query R/3 report via our Portal. I had done SSO configuration.
   But we had about 500 vendors, it is impossible that we create 500 R/3 users for our vendors, because the cost is too much .
   And there is another problem, vendor who had the authorization to query report can query the other vendor's data at same time. But we expect that certain vendor can query his data only.
   I think this is a general problem when integrate Portal and R/3, BW .
   Is there somebody had solved this problem or give any advice?
   Any discuss is welcome.
Best Regards,
Jianguo Chen

Hi,
I would say: get in contact with your SAP account manager anc check which options SAP can offer you...
Normally every user using a R/3 system has to have a valid user license in that system. Expecially when you want to access control to data on user (vendor) level you nedd to identifiy the user clearly and uniquely which by standard means you need a user for every vendor.
Hth,
Michael

The problem about install openssl

Similar Messages

Maybe you are looking for