The problem because MTO material converted to MTS

Dear Friends,
Here we have converted MTO materials to MTS, now some open PR and PO are there for MTO cyle... but now the same material is been given MTS settings, So Kindly tell me what procedure should I follow to mke the requirement qunatity proper in MD04.
Thanks and Regards,
Krishna

Hi
In MRP-4 view give ind.collective requirement field as "2 - collective requirement". Then re run the MRP in MD01 with option delete and recreate. All unfirmed PRs will be deleted and new will be created. If the PR is firmed then it will have to be deleted manually only.
Regards
Antony

Similar Messages

Hi all everytime i try to downlod itunes it reaches maybe 97% and then it times out i am not sure what seems to be the problem because my internet connection is fine.. any ideas???

hi all everytime i try to downlod itunes it reaches maybe 97% and then it times out i am not sure what seems to be the problem because my internet connection is fine.. any ideas???

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the iTunes forum appropriate for your system (Mac or Windows).
Regards.

TS4002 I bought iPad and I can not access, A message appears asking me account and password when i return to the person who I purchased it from him, he told me that he forgot the account and password I want a solution to the problem, because in this way I

I bought iPad and I can not access, A message appears asking me account and password when i return to the person who I purchased it from him, he told me that he forgot the account and password
I want a solution to the problem, because in this way I will not benefit from the iPad

There is no solution. You have to provide the ID and password. There is no way around it. If the person you bought it from can't provide it, return it and get your money back.

My Iphone 4s is not being recognized by itunes at all. There is no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!

My Ihone 4s is not being recognized by Itunes.There seems to be no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!

Thank you allan this worked, the final thing was updating the driver softwar for the AMDS in device manager. Thanks again.

I have one problem with my iphone 4s i c"ant make facetime calls with other iphons. olso when i make calls on the facetime icon is question sign! can any oane hellp me! wath my be the problem because it is all new iphone!

i have one problem with my iphone 4s i c"ant make facetime calls with other iphons. olso when i make calls on the facetime icon is question sign! can any oane hellp me! wath my be the problem because it is all new iphone!

First question where ae you located? If you're in the Middle East or UAE, factime has been restricted by the government.
If your not from there look here:
http://support.apple.com/kb/TS3367

I cannot sync my iphone because my "other" storage has ballooned to nearly 6g. Also, I'm worried to restore my iphone to fix the problem because my notes aren't syncing to iCloud. Aghh! Can somebody help?

My "other" storage has balloobned to 6g and now my iPhone will not sync. I ought more ICloud space to compensate, but that did not remove the "other" storage and I am still unable to back up, even to my PC.
I've never encountered this problem before and I've been an iPhone customer for years.
Someone mentioned restoring my iPhone, but I'm worried I'll lose a lot of info as I cannot find my past backups.
Ideas?
Thanks!

First - try deleting some Messages if you don't regularly clean them out. In my experience, eliminating that first often reduces the "Other" situation enough where your iCloud backups will start working again. Your backup file is probably enormous which is causing this problem with Notes.
If that doesn't work come on back and everyone will help you work on this.

ITunes 11.0.4.4 crashes when I play certain songs and the problem is spreading.

Ever since I downloaded iTunes 11.0.4.4 (for windows 7), the program has been crashing whenever I play certain songs and at this point the problem is spreading, more and more songs that weren't problems before. I have been through just about every troubleshooting step I could find more than once, reinstalling, safe mode, conflicting programs... if a solution out there was even vaguely related to my problem, I've probably tried it. The only modification that I've made to the program is enabling 1/2 star ratings, and I don't think that's the problem because the earlier versions of itunes worked fine with it, and I've tried temporarily moving the itunes preferences xml to make it generate a new one, and it didn't fix anything.
My library has over 14,200 tracks so I can't possibly delete and then re-add all the problem tracks to iTunes, and even if I could, I've tried doing that with a small number of specific songs already, and while it worked at first some of them have started making iTunes crash again at this point.
I understand that the problem is most likely that my library is corrupted, but I'm very wary of the solutions to that problem that I have seen because I have had to use them before more than once, and each of those times I've lost thousands of songs (last time it was 5,000 tracks) in the process and a shockingly large percentage of the tracks came back disorganized and improperly labeled (some of them as 4 letter strings of capital letters that I can't seem to identify without using shazam) and without ratings ( I have "keep iTunes files organized" and "copy files to iTunes media folder when adding to library" in preferences checked.)
It takes a huge amount of time to redo the information for the amount of tracks I have even if you buy software to help automate it, and it would take me 5.7 days to redo all of the ratings I've done, and ratings are important to me. I've added a lot of new tracks since then and my library is still 2,000 tracks smaller than it was before i had problems last time. The solution scares me enough that I've put it with the crashing for two months now, but it's getting unmanageable. If anyone can give me a way to fix this that would leave my library intact, or at least minimize the damage, I would be extremely grateful.
Thanks.

I found this and it worked!!!
kcp123456789
Re: iTunes keeps crashing when I select iTunes store (Win 8) iTunes 11
Sep 26, 2013 5:43 AM (in response to Bristol1981a)
I had this exact same problem. I found a fix on another support post that worked perfectly for me. Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll. Then browse and past that file into C:\Program Files (x86)\iTunes.
Hope this helps you. My iTunes store is working fine now.
God bless!!

5.0 won't install on my MacBook Pro. Is Adobe the problem?

I don't know why I can't install the Firefox updated software. Can you help? I wonder if the fact that there is a dispute going on between Apple and Adobe creating the problem because I know I can't download Adobe.

Try the suggestion in this thread.
I never tried this.
https://forums.adobe.com/thread/1516466
Best.

Go back to Comcast? At least I knew what the problems were..

I have a couple of days to make a decision about keeping FIOS, and I've had an extremely frustrating 28 days. I've had numerous problems over this time.
Do Level 3 techs exist, and would they actually research an issue or just do what everyone has done and tell me they don't know?
I've had FIOS for less than 4 weeks, and it's not enough time for me to decide to stay or go. Too many problems with no acceptable feedback.
I'm on my
2nd ONT
4th STB (Cisco 435HDC)
3rd Router (Actiontec MI424WR Rev I)
Between me and my most recent tech, we tested running many different coax configs, including running coax directly from the ONT to a splitter where my TV and router are.
I think I've had every splitter and coax cable swapped out except for the one in the wall that runs upstairs to the TV and Router, but it doesn't seem that it would be the problem.
The next thing they want to try is giving me an older router...I'd like to skip that step if possible, or I'd like a good reason why they want to do that, instead of just throwing another piece of hardware at the problem because they don't know what else to do.
I'm wondering if some things a dispatched tech and I found could be causing it. Some of this may be normal, I just need to know that.
For example, is this normal?
D01 Health Check Summary
1. MoCA often (usually at least a couple times a minute) changes status between Unacceptable and Good?
2. CableCARD changes from Good to Failed?
3. Cable Status changes from Connected to Partial?
4. OOB Turner from Good to Unacceptable?
5. IB Tuner - Good to Fair or Not In Use?
6. More infrequently, but still a few times in the hour I have the diag screen up, I see..
Provisioning Status changes to In Progress and
Software Download to Unknown
Unfortunately, I can't tell you which MoCA connection is coming up as Unacceptable, it doesn't differentiate (at least not on this screen) between the STB-Router connection and the Router-ONT connection.
Someone please, please help me. I really wanted to like FIOS, but dealing with this for almost a month has been very trying.
Thanks in advance.

Thanks. The last guy out here actually did that. He ran a cable from the ONT to the splitter upstairs, which connects the DVR and router. Still had problems.. We tried a lot of different configurations, and saw problems with all of them. Actually, none of it makes sense. For a while we thought we had determined it was the internal cabling, but then we were proven wrong. The whole thing is very strange, and has baffled many. The last guy was here for 4 hours his second day trying to give each change in configuration a chance to "settle."
I was hoping someone at Verizon would call Cisco to find out how what is normal for those diags.

Transfering the stock of old material

Hi guru's,
Iam transfering the stock from old material to new materialcode w.r.t. order Mvt 261 & then receiving it in new material by Mvt 262. Now the problem is one material is given for subcontracting how can I transfer it. By the above said process the stock is not becoming zero for the old material. When I looked at the material document for the given material, it is displaying sub items / materials in that MB51 list.
how can I transfer the material.
its urgent
thanks
tuljasingh.

hi,
Entering the purchase order number is simply a way of saving you time re-entering data. No data in the purchase order is actually updated - i.e. you can make transfer postings for components more than once.
so u can transfer post material without po
try ME2O so that u
can post ur material from there and also u can monitor ur stock aslo
refer
http://help.sap.com/erp2005_ehp_03/helpdata/EN/4d/2b906243ad11d189410000e829fbbd/frameset.htm
Thanks & Regards
Swathi

Hi, im tinkering with mpeg streamclip and its giving me problems because it won't open my ripped dvd files from my desktop. It keeps giving me the same message "no VOB files can be found". Can anyone help me, this doesn't make sense.

hi, im tinkering with mpeg streamclip and its giving me problems because it won't open my ripped dvd files from my desktop. It keeps giving me the same message "no VOB files can be found". Can anyone help me, this doesn't make sense. I also found online that you need Apple Mpeg-2 playback component in order to use mpeg streamclip. Even though I have OS X Lion, should I download the add-on?

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

New@SSIS - Excel Src: The value could not be converted because of a potential loss of data

Good day,
I am currently working on a SSIS package that had been built by a previous user. That Package allows me to import data from an excel source to a SQL table. The excel sheet holds multiple columns, However I am having difficulty with one
column when running the package.
The column rows hold a character and an integer (eg: N2). The data types are as follows:
SQL – varchar(3),NULL
SSIS - double-precision float [DT_R8]
I then inserted a data conversion task to change the data type. The task holds the following properties:
Input column – F6
Output Alias – Copy of F6
Data Type – string[DT_STR]
Length – 50
When I execute the package I receive the following error:”
[Excel Source Data [76]] Error: There was an error with output column "F6" (91) on output "Excel Source Output" (85). The column status returned was: "The value could not be converted because
of a potential loss of data.".
I do know that usually the message "The value could not be converted because of a potential loss of data." refers to a data type or length problem.
Further insight to this problem will be much appreciated.

Hi Zahid01,
From the error message you post, we can infer the issue is caused by the input column “F6” cannot convert to the output column in Excel Source.
Based on my test, I can reproduce the issue in my environment. The exactly cause is the data type of input column “F6” cannot convert to the data type of corresponding output column. For example, the data type of input column “F6” is [DT_STR], the data type
of corresponding output column is [DT_I4], and there are some nonnumeric values in the input column “F6”. When we execute the task, the error occurs. We can verify the issue in the Advanced Editor dialog box of Excel Source. The following screenshot is for
your reference:
To avoid this issue, please make sure the input column can convert to the output column in Excel Source, including all the values in the input column.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Service template problem - Unable to perform the job because one or more of the selected objects are locked by another job - ID 2606

Hello,
I’ve finally managed to deploy my first guest cluster with a shared VHDX using a service template.
So, I now want to try and update my service template. However, whenever I try to do anything with it, in the services section, I receive the error:
Unable to perform the job because one or more of the selected objects are locked by another job. To find out which job is locking the object, in the jobs view, group by status, and find the running or cancelling job for the object. ID 2606
Well I tried that and there doesn’t seem to be a job locking the object. Both the cluster nodes appear to be up and running, and I can’t see a problem with it at all. I tried running the following query in SQL:
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
but all this gives me is an error that says - conversion failed when converting from a character string to uniqueidentifier msg 8169, level 16, State 2, Line 1
I'm no SQL expert as you can probably tell, but I'd prefer not to deploy another service template in case this issue occurs again.
Can anyone help?

No one else had this?

"itunes could not copy song to the ipod because the file could not be converted."

Hello. I'm using iTunes 10.6 and trying to sync an iPod Classic 120GB with Mac OS X 10.6.8. I keep getting the error "itunes could not copy 3 songs to the ipod because the file could not be converted." All three songs are AAC, 256kbps. I didn't have this problem with these songs a couple days ago until I decided to convert all 256kbps songs to 128kbps to fit on my 120Gb iPod. iTunes, nor my iPod haven't updated during this time. Any suggestions?
-Chad

This problem does seem pretty random, affecting just a small number of tracks. Apparently it is due to some file corruption or something... Anyway, this thread https://discussions.apple.com/thread/2654317?start=15&tstart=0 has a couple of solutions spelled out. Basically the same thing that a-monk-at-large suggested above. (Delete and redownload the offending tracks.)

Itunes could not copy song because the file could not be converted. Can anyone help

Synced Jeff Wayne's War of the World from Mac to Iphone - 1 track could not be copied - error message "the file could not be converted" popped.
Any suggestions as to problem and remedy?

This "Workaround" doesn't fix the fact that Itunes generate an error message because it is unable to convert the audio file ALTHOUGH the audio file is OK.
This problem started with Itunes 11.1.3, and it affects almost every album in my library for no reasons ...
Tried deleting all library file, creating a new library and re-importing audio file that I know are OK ... funny thing, it's not always the same file that create this bug.
Really a random bug ... reopened itunes with "compatibility option" set to "Windows XP SP3" and it's different tracks from the same album that can't be converted now.

The problem because MTO material converted to MTS

Similar Messages

Maybe you are looking for