The problem in using 10g

Hi,guys:
I am a new Oracle user.Now i have a trouble when using the Oracle10g.
I have used the 9i.when i created index ,i will choose a language lexer.Such as CTXSYS.DEFAULT_LEXER, WKSYS.WK_CHINESE_LEXER, WKSYS.WK_JAPANESE_LEXER and so on.
But i cann't found where to choose in 10g.
Please tell me, how to do it in 10g and the detail steping.
Thank you very much!

Check the following thread.
do you know that?

Similar Messages

Time machine: An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.

Time machine backups are failing. I've followed the instructions I found on the Time Machine troubleshooting page (http://pondini.org/TM/Troubleshooting.html) but have gotten to where I don't know what to do next.
Sequence of events:
The main error message is always:
An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.
Yesterday, I opened Disk Utility and verified the disk. Got this error:
Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
I ran Disk Utility and repaired the hard drive. Then I manually started the backup before going to bed, figuring it was going to take a long time to run. When I got up this morning, the backup had failed with the same "could be temporary" error. I checked the log, which says:
Starting manual backup
Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC
Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:17
Error: (5) setxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:2
Deep event scan at path:/ reason:must scan subdirs|new event db|
Finished scan
Found 145601 files (11.88 GB) needing backup
16.1 GB required (including padding), 620.77 GB available
Copied Zero KB of 11.88 GB, 0 of 145601 items
Copied 0 files (Zero KB) from volume Macintosh HD.
Copy stage failed with error:11
Backup failed with error: 11
Ejected Time Machine disk image: /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle
Ejected Time Machine network volume.
Starting automatic backup
Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/9F8E7957-9C50-49C3-8314-880E5203E3D9
Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/
Does anyone know what the problem is here and what I should do?
Thanks,
Tery

You have repaired your boot drive (which is good) but have you repaired your time machine drive? I don't own a Time Capsule so I don't know if disk utility can operate on it. If it can, you should repair it as well. You may need to erase it and start a new backup. That happens to time machine volumes from time to time and is why people who are serious about their data never rely on a single source of backup.

Can anyone help me?Time Machine couldn't complete the backup to... An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk. What is the problem? I've made no changes.

I recently starting receiving the error message "Time Machine couldn't complete the backup to... An erro occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk. I have had no problems backing up my MacBook Pro 2011 to my Western Digital My Book Live through a Linksys EA4500 router until recently. I've made no major changes. I've ran a diagnosis on my back up drive with no problems. The Time Machine back up starts, but about after about 5 to 10 minutes I get the error message. I can see the shared drive in Finder. The light on the drive blinks while it starts the back up. I can see the shared folders on the networked drive. The backup process starts but for some reason it just stops. Can anyone help?

You can't repair a network volume in Disk Utility.
Backing up to a third-party NAS with Time Machine is risky, and unacceptably risky if it's your only backup. I know this isn't the answer you want, and I also know that the manufacturer says the device will work with Time Machine, and that it usually seems to work. Except when you try to restore, and find that you can't.
If you want network backup with Time Machine, use as the destination either an Apple Time Capsule or an external hard drive connected to another Mac or to an 802.11ac AirPort base station. Only the 802.11ac base stations support Time Machine, not any older model.
If you're determined to keep using the NAS for backup, your only recourse for any problems that result is to the manufacturer (which will blame Apple.)

Time Machine Error: "An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

I have a MacBook Pro 2.8 GHz Intel Core 2 Duo with 4GB, 500GB HDD, running 10.8.2 My computer as been running slow and fearing my HDD might die. I bought a brand new 1TB G-Drive from Apple yesterday and started my back up. It gets to just over 22GB backed up then I get this error message:
"An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."
Anyone out there who might be able to help me fix this?

I have a MacBook Pro 2.8 GHz Intel Core 2 Duo with 4GB, 500GB HDD, running 10.8.2 My computer as been running slow and fearing my HDD might die. I bought a brand new 1TB G-Drive from Apple yesterday and started my back up. It gets to just over 22GB backed up then I get this error message:
"An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."
Anyone out there who might be able to help me fix this?

HT3275 "The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk."

The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk.
what does this mean?? why can't i backup before i have to get my hard drive replaced?!!? arghh

brahr3 wrote:
I am getting the same error message: "The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk." I don't have a TC but rather an external drive, which is twice the size of my harddisc, and it still has plenty of free space. The problem has lasted for 5 days. I even used a different external drive -- still same error message. Needless to say that I have run Disc Utility several times. Can anybody help? Thanks
I am having issues with some USB drives on Mountain Lion.. work perfectly on another computer with Snow Leopard.. not even recognised by ML.
Is the disk recognised?
If so and TM cannot pick it up.. do a full reset of TM and try again.
A4 http://pondini.org/TM/Troubleshooting.html

HT1176 My airport TM will not backup and i keep getting the error msg "Time Machine couldn't complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

My Airport TM will not backup and i keep getting the error msg "Time Machine couldn’t complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

My Airport TM will not backup and i keep getting the error msg "Time Machine couldn’t complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

Upgraded to iOS 6 and now I can't open anything in the kindle app? I have to say that I have had my ipad3 for 6 months and intensely dislike the problems with using it. Also is there any way of opening more than one screen as it is hopeless otherwise?

I Have had my iPad for 6 months as I cannot access my work emails using windows. I have to say that it is the most unhelpful device I have ever used and although it looks like there isn't an answer for some of the questions I have asked below, I thought I would try!
1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
IT might just be that I don't have the correct settings (I am a technophobe) but I absolutely hate the iPad and only have it for work emails, it is so annoying that I can get my mobile phone and kindle3g to work fine, but always have problems with the iPad. I am sure it could be good (and for reading emails on the go in the uk it is great, as I like the key board) but it just seems to make everything else difficult.
i Hope you can help and sorry for asking questions others have, but I am just hoping that something new might have been developed!
thanks,
K
Message was edited by: K Paton

1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
Try rebooting your iPad, that should fix he issue. I that doesn't work, delete the app and re-download it. The Kindle books should all be in he Kindle cloud services and you can get them again. I have an iPad2 w/ Kindle app and it works just fine - no issues.
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
Page as in a kindle book way? turn iPad to landscape position from portrait position. If, however, you mean open more than one application at a time, then no. And not hopeless, as it takes a bit of time to get used to, going from a desktop/laptop format to tablet format.
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
It's actually fairly easy. Press down on the word, then you can expand by drawing your finger to cover word/sentence/paragraph/page, hit select or select all then it gives you the option to cut, copy, paste, define. If you want to use a word processing app on the iPad, Pages is a good application.
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
It's the connection on your phone. Samsung Galaxy SII? Android software? What you have to do is go to the phone's settings and connect via wireless, not Bluetooth. Go to System Settings (on phone) and under Wireless and Networks click 'more' and go to the Tethering and Portable Hotspot option. Set up your mobile wifi hotspot, name it though it will probably come up with 'AndroidAP', choose a WPA2 security level and put in a password. Go back to previous screen and turn on 'Portable Wi-Fi Hotspot' box. Then on your iPad in the Settings - Wi-Fi section, it should then recognize your phone for tethering. If it's a Windows Phone 7, I don't know the layout of that software, but presumeably similar.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
Sometimes the issue is with the website design, not all websites are optimized for mobile devices - not just iPad but also Android devices. It happens. They're getting there, but occasionally the page might need a refresh.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
It depends on what you use to build the websites on the computer. Recommend a free program on the computer called CoffeeCup Free HTML Editor. I don't recommend using IE period; Firefox or Chrome are my choices on Windows machines. I have two websites that I manage, both using this program. I'm assuming that when you mean you can't access the sites on the iPad you mean to update them? Ostensible there are apps to let you do this. What format are the sites? Without seeing what exactly you mean and what you want to do, it's hard to explain.
As for seeing full page while emailing within a site, turn iPad to portrait mode, and try to finger-pinch touch the screen to see if that will bring the fuller page into view. Other option is opening a second tab with same website and just go between tabs to reference material.
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
If you were outside the US or Canada, my guess is the problem lies within the SIM card in your iPad. If you were outside North America, there are different band levels - I'm guessing you have a SIM thats locked to a particular provider. Band level frequencies differ per country/continent, so a SIM card that will work in Canada/US will not likely work in UK/Europe/Asia/Australia, etc. you will be able to get your emails again when back on a wifi network. Mobile phone may have a different type SIM card (GSM/HSPA) from your iPad SIM. Also, check your email settings.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
Moving the cursor on a sentence is a matter of putting your finger on the screen where you want it. It's exceptionally easy to do. I'm using the Notes app to write this whole segment and I just need to put my finger where I want to change things and presto it's ready for me to change where I want it.
Here's a solution: sell your iPad (after you wipe your data off it) to someone who will appreciate it, and put your money towards the Windows Surface Tablet out later this year/early next year, where you can (reportedly) connect a mouse to it. It will have some of the Windows 7/8 functionality that you're more familiar with, or get a netbook.
- Ceridwyn2

The problem in using object = 0090 to create sales order in LSMW?

who can tell where is the problem "No logical path has been specified" when I doing "specify files"?
tks in advance.

Hi
There can be two ways -
1. Check if the file is present and with correct format.
2.The problem might be that when we execute "specify files",
sometimes, by default we get file name ..but not the entire path...
Try to browse thrugh the file entire path ...and then press enter .
Hope it helps
Reward if useful.
Regards
Megha Sharma

The problem of using timer in long windows with scroll bar

Hello everybody!
There is a problem of using timer in windows with scrolling. Lies in the fact that at the moment of the trigger "when-timer-expired", is "jumping" on the active field in the form (where the cursor). If the user scrolls at this moment unscrewed to view another location below, or higher, then it will then "jump" from the viewing area.
I tried to fix the problem by replacing the timer in Forms, a timer in the JavaBean.
It did not help. At the moment of the trigger WHEN-CUSTOM-ITEM-EVENT of JavaBean, anyway there is a jump.
I have not a few forms, but only one form. With one long window.
I use Oracle Forms 10.1.2.3.
The forum discussing this problem. But it has not been resolved, I think. It is also proposed to destroy and recreate the timer at the transition between the forms. But the form I have just one!
Has anyone encountered this problem? What are the solutions?

CraigB wrote:
Could you explain the overall affect you are going for? Perhaps if we knew what you were trying to achieve we could offer potential solutions that don't involve using a Timer or perhaps a differnt way to use the Timer.
Craig...No.
In different tasks, different purpose of timer. Can I use the timer without jumps?

The problem in using JComboBox. Need Help!

HI,
I am programming to make an address bar as IE? Now, I am using JComboBox as the address bar. I also read the article of "how to use JComboBox" in sun tutorial.
The problem is I cann't make the icon and text together in the address bar. As in the tutorial article, I can make it there since the JComboBox is uneditable.
My case is I still want the icon in the JTextField of JComboBox, but I am still able to input address into this JTextField as well.
Is it able to add a JLabel into JTextField first, and then be able to input text exactly after this icon, then my problem is solved.
Thanks!
Feng

Hi Feng,
My suggestion is that you try out the JComboBox methods setEditor() and setRenderer(). They allow you to specify custom components that will be used to show the combo box items. You'll need to do a bit of work, but you'll probably be able to provide a custom component that will display your icon.
Hope that helps!
Shannon Hickey (Swing Team)

The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk. Have tried disk utility to repair but still not working.

My time machine backup has failed for the last couple of days. Im getting the message saying," error. this may be temporary, if the problem persists, go to disc utility to repair the problem."
I have done the first aid in the disc utility and still not repaired. Do I erase the disc, as it says????

1. Reboot the TC alone.. Just pull out the power cord.. count to 10 and plug it back in.
If TM still cannot find the disk..
2. Do a full network reboot.. everything off.. restart in correct order.. modem.. wait 2min.. TC wait 2min.. then all the clients..
If TM still cannot find the disk..
3. Factory reset the TC and do a fresh configuration. The TC is known to occasionally throw a wobbly and spontaneously forget its name.. part of old age.. (2years is starting towards old age for a TC).
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
If TM still cannot find the disk..
4. Wipe the old backup.. and start afresh.. this sometimes also happens.
You can try a verify of the disk. See A5 here.
http://pondini.org/TM/Troubleshooting.html
Sometimes a clean fresh TM backup is the only way.
Good luck.

The problem of using webservice to transfer binary data

I want to use webservice to realize downloading file , and then I think we can to transform the whole file to binary data ,and then use webservice to deliver these datas to client. but there is a promble. When the file size is a bit large , such as exceeding 1.5M , then client will receive error report. How to solve this promble. Another I think when server transforming the whole file to binary data , It should apply for much memory , as large as the file. I think this is not a good solution . Any one can give me some ideas ? How to realize download file using webservice(the server is oc4j)

839507 wrote:
the picture does not synchronize with sound. Why? Where is the problem??Dear Automotive Mechanic,
My car won't start, where is the problem?
Sincerly,
Captain Foss

Hangs up when i try to access email, do not have the problem when using internet explorer

do not get indication of number of emails on home page. have att.net which uses yahoo.com. when i click on email icon i get the rotating circle icon, but just stays there for longer than i have been willing to wait. get out of there by right click and reload. do not have problem if using internet explorer

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

The problem in using of (mx) VideoDisplay.attachCamera(camera) in flex webapp

i have encountered a problem last night. my code looks like the following:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx"
               minWidth="955" minHeight="600">
    <fx:Declarations>
        
    </fx:Declarations>
    <fx:Script>
        <![CDATA[
            private function onCreateComplete():void
                var camera:Camera = Camera.getCamera();
                if(camera)
                     vid.attachCamera(camera);
        ]]>
    </fx:Script>
    <mx:VideoDisplay id="vid" width="300" height="300"
                     verticalCenter="0" horizontalCenter="0"
                     creationComplete="onCreateComplete()"/>
</s:Application>
when i run the code above in my firefox, the videodisplay component showed in the browser,
but the video captured by my camera didn't show in the videodisplay.
if i change the <s:application> to <s:windowedapplication>, and run as a desktop app, everything is OK.
then what is the problem of not showing the video captured by my camera in flex webapp?
BTW, my flashbuidler's flex SDK is 4.5.

Please post your query on flex forum as it does not look like FMS issue : http://forums.adobe.com/community/flex/flex_general_discussion?view=discussions

Problem in using 10g Dedoloper suite forms devoloper

I have installed devoloper suite 10g in E:\Datasuite_home1 dir.
My oracle databse is in E:\product\oracle\10.0.2\db_1 dir.
But when I'm opening forms builder and create connection in Database with userid and password,
it is showing as "TNS could not resolve the service name requested".
The databse is running fine as I could connect through TOAD client itself.
Could anyone tell me what has been the exact problem and its solution.
Regards,
Souvik

user10237942 wrote:
Could anyone tell me what has been the exact problem and its solution.The exact problem:
Forms Developer looking at tnsnames.ora file in Developer Suite home, not in Database home folder. On another side TOAD looking at tnsnames.ora file in Database home folder.
Solution:
As Hub already posted, you need to copy tnsnames.ora from database E:\product\oracle\10.0.2\db_1 dir\network\admin into in E:\Datasuite_home1 dir\network\admin
Cheers!

The problem in using 10g

Similar Messages

Maybe you are looking for