The problem is that when I try to update my NI-DAQ drivers from 6.5.1 to version 6.7
I have a Win95 based system running Labview5.1 which utilizes the PCI-6025E board with the BNC-2090. The existing version of NI-DAQ drivers is 6.5.1. The problem is that when I try to update my NI-DAQ drivers to version 6.7 I receive the following errors:
1.The new software goes thru all the installation steps upto the point where it displays the message that it needs to restart to complete the installation.
2. The system then reboots and displays the message," Completed Updating Window Files"
3. Then I receive an error:
'Rgdaqhce' performed an illegal operation and will shut down.
4. The window closes and brings me back my normal Desktop display. The NI setup window appears and displays" Installing: Please Wait".
5. Then it goes thru the NI-DAQ setup normally, choosing the PCI-6025E and the BNC 2090 doc options.
6. WHen it gets to the point of selecting Documenatation PAth, Error: NI-DAQ SETup
Cannot find installation information for :322153.
At this point I just choose OK.
Then it proceeds where it request the Development path, LAbview 5.1 and then it proceeds to copy all the files and then states "Installation Complete" and are ready to configure MEasurement & Automation Sys.
7. The Measurement & Automation window appears:
DATA NEIGHBORHOOD
DEVICES & INTERFACES
SCALES.. WHen I click on any one of the above I get the following message:
" The configuration file has been updated from a previous system. If you save changes to this file it will be permanently upgraded to the current version." At this point I choose "OK"
8. Then it states.."you must reboot for the changes to take effect. Would you like to reboot? YEs or No!". where the Data Neighborhood folder never opened..
9. If you choose YES, the system reboots. If I open Measurement & Automation and click on Data Neighborhood again, I get the same above message as in #8 above. If I choose No at anytime to reboot, I get the following Error:
" Explorer- Illegal operation and it will shut down"
Then Measurement & Automation shuts down and brings me back to my windows desktop.
SO no matter what happens I can never get into Data Neighborhood, it keeps going into this cycle.
So I removed NI-Daq version 6.7 and re-installed version 6.5.1.
What recommendations may you suggest in upgrading from NI-Daq 6.5.1 to 6.7 on this system? I would like to take advantage of NI-DAQ 6.7 new feature where LAbview for Windows Data Acquisition Library LLBs now contain function calls to a dynamic link library called LVDAQ.DLL, where the benefit of changing the VIs to call DLL functions instead of code interface nodes, CINs, where thet VI load time is dramatically improved.
Any help with this matter would be greatly appreciated.
In the meanwhile I am searching your support page here to see if there are any similiar situation..I have not come across any as of yet.
Thanks for your help and sorry for such a long email.
Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks
Similar Messages
-
I updated to ios5 on another computer because i was stuck on the recovery mode loop but now the problem is that when i try sync to my current one iphone does not show up or sync at all.. any ideas? gonna try uninstall right now..
There is no way to consolidate iTunes accounts.
Setting up an iPhone has never required creation of a new Apple ID.
You've apparently purchased content with both Apple ID's. Sign into the device with the correct Apple ID and sync the content. -
As I was saying, I have an iPod Touch which I bought this Summer on August, and until recently it never gave me a problem.
I recently downloaded a "free" app (which means, it's partly free, so if I want it completely I should buy one of the "extensions" it has).
Well, today I was trying to buy an "extension" for an app. I did everything as per usual, but for some reason, there appears to be a message that I can't buy it with visa, when I've already bought other apps and things online with the same card, without a problem. Which should cross the option that the problem resides in the card (I also contacted with the bank and everything was as per usual with the card).
Also, a friend of mine has this same app and for this person everything went smoothly without a problem.
Does anyone of you know what is the problem or what should I do?The message says: "The payment method has been denied, try another method"
I'm living in the same country and city since I was born, so I don't think the location is the problem.
And yes, I paid with the card a meal in Burguer King today. And nothing more. -
I just bought a brand new iPhone 5s and a huge problem is that when i try to sync my music to my iPhone 5s, under the music tab it says that i can only access my music via iCloud. is there anyway to sync your music from your computer?????
The ! sign before the song means that the actual song is no longer on your computer and/or iTunes library.
-
I don't know what I downloaded that caused the problem, but now when I try to make a new folder on the desktop of my new Windows 7 computer, I have only the following choices: Shortcut, Bitmap Image, Contact, Microsoft Word Document, Journal Document, Microsoft Powerpoint Presentation, Text Document, Microsoft Excel Worksheet, and Briefcase. No new folder choice. Anyone have any ideas how I can correct the problem?
This support forum is for Firefox related issues. The volunteers on this forum can only help with Firefox issues.
Please consider contacting another support service like [http://www.ask.com/answers/browse?o=0&l=dir&qsrc=321 Ask.com].
Sorry. -
I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
i recently buy an apple iphone 4s.the problem is that when i started music player on my iphone the speaker is not outputting the sound.and when i lock the phone at the same time the sound starts.thos problem is from last 3 days.and i am really confused???
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, take the device to Apple for evaluation and possible replacement. -
good night recently my iphone 4s was exchanged for a new one because was defective and was in warranty. the problem is that now I try to use the same apple id on itunes and applications while had bought the old iphone does not appear and I think should appear. Can someone help?
?
-
My MacBook Pro that is running on Mac OS X 10.6.8 won't update software that I need in order to download the newest iTunes software to connect to my iPhone 6. Problem is that when I go to update, it restarts the computer but never updates any of the software.
In addition to Stedman's spot-on reply --
When you buy an upgrade disk, all updates in that OS can be found on Software Update.
For instance, I bought Snow Leopard at 10.6.
All other updates have been free and downloadable. So I'm not a 10.6.7.
10.4 (Tiger) went to 10.4.11.
10.5 (Leopard) went to 1.5.8
10.6(Snow Leopard) is currently at 10.6.7.
Now, when Lion come out (the next major upgrade of OSX), I will have to pay to go to 10.7.
After that, updates are free til 10.8 comes out. -
i have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder. or sometimes appears the apple logo and than back again to the interrogation folder... Help please!!!!
mcbsousa wrote:
hm... Is there any chance of making the bootable usb file and send it by dropbox or something like that? than put it in a pen drive and connect to the mac??
Sending by Dropbox where, To who, to what computer? As your does not start up.
You need to take at least the OS disc to a work Mac computer and create DMG from the OS install disc then restore that DMG to USB thumb drive. Then you can boot the computer from that thumb drive and install the OS. That is if your hard drive is functioning correctly.
Then you can use the App disc in the external CD/DVD drive to load up all the included Applications that come with your version of OS X. -
Hello! I purchased a month package on Lightroom and Photoshop adobe a few months ago. The problem is that when I took this contract in a year, so, my computer broke down and I have not been downloaded programs. Now I have bought a new computer but how do I get access to desssa two programs.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
The problem is that when I check "email authentication" to retrieve my password, they DON'T send me an e-mail. Also, when I check "Answer Security Questions" and I enter my birthdate (which is the same in all my e-mail ids), they tell me invalid birthdate. I have been trying this for a long time, there is no way I can retrive my password and a lot of my apps are linked with this id and because of this issue, I'm not able to update them.
search google for "iphone remove picture from contact"
-
I need to update my apps in the App Store, but when i try to update, the Sign Up Apple ID pop up box came out with different Apple ID. How can I change it to mine? My iTunes Store already log in with my own Apple ID.
Just now you said the other Apple ID stored inside it, is that mean all my data back up in that the other ID?
-
I used to share one apple ID/account with my ex but made a new one for myself recently and logged out of the old one but when I try to update my iBooks (only happens with this app)it asks for the other account's password(which my ex changed by now). I don't understand why this happens when I'm logged into my account and it only happens with that app. Please help, I need to update. :/
Content (apps, music, ibooks, films etc) is tied to the account that originally downloaded it, so if the iBooks app was downloaded using the account that you used to share with your ex then only that account can download updates to it. As it's a free app you could delete it and re-download it under your own account - and then re-download your ibooks into it (or copy the books to your computer's iTunes first via File > Transfer Purchases and then sync them back to the app).
-
My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file location to run the update in all of my iTunes files as well as when I've tried reinstalling it.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2
Maybe you are looking for
-
You have interrupted the wizard!! (Photoshop CS2)
Okay, lately I've been having problems installing photoshop after trying to create a user account for myself on this damned computer; a friend has supposedly helped me but we'll never know until I'm able to install the program itself... This is where
-
How to delete all mails with one klick?
It's annoying to delete every single mail. How to delete all mails with one klick, like in the paperbasket? Thanks
-
IPod 4 touch. 3yrs old. Not charging when plugged in. But charges when the battery gets drained. when battery gets over I keep it for charging. It switches on and doesn't charge.. Plz help!!;;
-
I want to put word docs or PDFs on my touch. I read that I can save the word docs as PDF and put it in photos or save them as txt and put them in notes, but my computer recognizes my touch as a camera and won't let me drop things in the root folder.
-
Is there any known viruses on the 8900?
When using my phone the last 2 days, volume icon keeps going up & down which clips the conversation when I'm talking. Is this a virus or a software problem?