The problem of installing oracle database 9.2.0 on Redhat 7.2

Hi, there,
I meet an error when I want to run runInstaller to install oracle database 9.2.0 on Redhat 7.2 at the Oracle Database Configuration Assistant step:
ORA-03113:end-of-file on communication channel.
the installer report every other things are installed successfully except Database Configuration Assistant. but after I try to connect to database using sqlplus:
sqlplus /nolog
connect / as sysdba
after a very long responding time, there is an interior error. I don't know how to fix it. do I need reinstall the oracle or mannully configure the database? how to do that? my machine is P2 266 with 128M memory. the harddisk is 30GB. I don't know if this problem is caused by memory limitation?
besides, who knows any other forums or website about oracle database installed on linux? I found there is very limit resource about this content on oarcle website.
any hint will be great appreciated!

It could be because of the memory. Oracle 9.x requires 512 MB minimum on Linux. Also the only Red Hat Oracle is now supporting is Advanced Server. But there are workarounds.
There is an excellent web site for installing Oracle on Linux, but it has been down for the last week or two. But try it maybe next week:
www.puschitz.com

Similar Messages

Problem in installing Oracle database 10.2.01 and SOA suite


Hi ALL,
I have the following two problems.
I get a windows error saying "oui.exe has encountered a problem and needs to close. We are sorry for the inconvinience" whenever i try to install Oracle database 10.2.01.(problem 1)
However, i used the Oracle database from other system and installed SOA suite on my system. It was working fine until recently when it failed to start. I had only one option i.e. to deninstall the SOA suite.(i used the oracle deinstaller to deinstall the SOA suite) . When i tried to reinstall it again, i got a warning saying "DHCP configuration was detected on this host. The installer also detected that the local host name and the network hostname differ". When i ignored this warning and continued the installation, the set up falied to detect the Oracle database which i had used earlier(problem 2). Do I need to clear any logs or do i have any way to sort out these two problems. Please help. ?:|



i am trying to install the SOA SUite against locahost. I have installed the loop back adapter but facing the same problems that i used to face earlier.

Problem in installing oracle database 11g express edition

while installing oracle database 11g express edition during product specific prerequisite check, checking for oracle XE service instance is failed, what to do ?

Hello, and welcome to the OTN forums,
the prerequisites are documented quite well. I'm not sure about the actual error message, but from what you write it sounds like you already have another Oracle XE install on your machine, possible the Oracle 10g XE. As mentioned in the Installation Guide, you may have only one instance per server, so the installer fails.
If that's not the reason, can you please post the exact error message you receive?
-Udo

What's the Problem While Installing Oracle Express Server/Client On P-IV System

Hi,
Please let me know if there is any problem with the Pentium-4 systems while installting the Oracle Express or the Client Software. I baught a P4 system and MS Windows 200 is installed.
When I run the setup for the Oracle express server or oracle express client, Only the Hour Glass pops up for few second and nothing happens. Even there is no error message displayed.
I enquuired to one of the Local Software Service centre and was told that Oracle products are facing problm with Pentium -4 .
If it is so Please suggest me waht to do....
Regards
Rajesh

Hello,
Please repost this question in the appropriate section of the Discussion Forum.
This forum is for general suggestions and feedback about the OTN site.
You can also use our new offering called OTN Service Network:
For Oracle Advice/Minimal Support (fee based) on the Oracle Database Server, Oracle9i Application Server Containers for J2EE (OC4J), Oracle9i JDeveloper, Reports, Forums, SQL*Plus, and PL/SQL, please go to: http://www.oracle.com/go/?&Src=912386&Act=45
For customers with paid support (Metalink) please go to:
http://www.oracle.com/support/metalink
Regards,
OTN

Problem in installing oracle database patch 10.2.0.3 on AIX 6.1

Hi,
I have to install oracle 10g on AIX6.1 so for that i have first installed 10.2.0.1 and then now trying to install patch 10.2.0.3 as AIX6.1 is certified form this patch only
when i tried to install patch silently using the following command it gives me the following
su - oracle -c "/p5337014_10203_AIX64-5L/Disk1/runInstaller -ignoreSysPrereqs -silent -force -debug \
FROM_LOCATION="/p5337014_10203_AIX64-5L/Disk1/stage/products.xml" \
ORACLE_HOME="/oracle/product/10.2.0.1.0" \
ORACLE_HOME_NAME="OraDb10g" \
TOPLEVEL_COMPONENT='{"oracle.patchset.db","10.2.0.3.0"}'"2>&1
it gave me a message :
Your platform requires the root user to perform certain pre-installation
OS preparation. The root user should execute '/usr/sbin/slibclean' on all the nodes before
you proceed with Patchset Installation.
Answer 'y' if root has run '/usr/sbin/slibclean' so you can proceed with Oracle
Patchset installation.
Answer 'n' to abort installation and then ask root to run '/usr/sbin/slibclean'.
Has '/usr/sbin/slibclean' been run by root? [y/n] (n)
could you tell me what does it mean... also how to remove this message. I mean i want that i will execute the command and then patch should be installed without any little interaction.(this message should not appear)

Why don't you (or your system administrator) simply do,what the message recommands?
The root user should execute '/usr/sbin/slibclean' You cannot remove the message itself. Run 'slibclean' and answer 'Y'. Unfortunately on the AIX platform it interrupts a silent installation.
http://publib.boulder.ibm.com/infocenter/aix/v6r1/index.jsp?topic=/com.ibm.aix.cmds/doc/aixcmds5/slibclean.htm
Werner

Installing Oracle Database 10 G Release 2 on Centos 5.0 and SuSe Linux Prof

I have problem in installing Oracle Database 10 G Release 2 on Centos 5.0 and SuSe Linux Professional 9.1.
1. According to information of installation steps given by one user at DIZWELL for Centos 5.0.
In the last step it says as follows (I had bought a CD Centos 5.0) - It gives the following error. My copy of Centos is not a downloaded Zip file.
su - oracle
/osource/runinstaller -ignoreSysPrereqs
Command not found
I had also installed Libaio and Libxp as mentioned in the document given by a user. How can i solve this. I need the complete installation of Oracle 10 G Rel 2 on Centos 5.0.
2. Installation of Oracle 10 G Rel 2 on Novell SuSe Linux Professional 9.1.
I had seen the oui opening up and when it moves a little further it gives some memory error and It requires about 900 + memory. After installing this linux if we have increase the memory What should we do? According to the message it says my system is having only 700+ memory. I do not know whether it is MB/KB. Please given the complete steps to solve this.
Thanks in Advance!
Regards,
Srinivas

was trying to Oracle 10G Rel 2 on Centos 5.0 but There I never got the Oracle Universal Installer.
Now, I had made necessary to Novelll Suse Linux Professional 9.1, where I has made the necessary changes to the system files and installed the libXp, glibc, libaio, make etc and I was able to get Oracle Universal Installer. During Installation at the end I got these errors.
gcc-3.2 Found not found Failed
Overall Result of this check Failed
Kernel Parameters
Semopm=100 found semopm=32 Failed
file-max=65536 Found file-max=52249 Failed
Checking for VERSION-2.6.5-7.97 Found VERSION=2.6.4-52 - default Failed
ip_local_port_range=1024-65000 Found ip_local_port_range=32768-61000 Failed
Check for rmem_default=262144 Found rmem_default=111616 Failed
Check for rmem_max=262144 Found rmem_max-111616 Failed
Check for wmem_default=262144 Found wmem_default=111616 Failed
Check for wmem_max=262144 Found wmem_max=111616 Failed
Recommended glibc VERSION
Expected Atleast= 2.3.3-98.28
Actual = 2.3.3-97 Failed
Overall Result of the above Failed
Checking Physical Memory
Expected = 922 MB
Actual = 500 MB
Please let me know What to do or How to rectify this? Atleast I should be able to install the same in SuSe Linux Professional 9.1. Mine is not a zip file now . I have unzipped and stored my Oracle 10 G Rel 2 on a CD Which was working correctly in SuSe Linux Professional 9.1 but the last step in the Installation in Centos 5.0 did not show the OUI when I had run from the CD. Should I have to configure the Internet for lInux also. I have Broadband internet 256 kbps From hathway Internet. How can i configure Internet in SuSe Linux Professional 9.1, Centos 5.0 and Fedora Core 4. Where can I give my IP Address, Gateway, Primay DNS, Secondary DNS, Email ID and Password, Host Name etc
Somehow, I need to install Oracle 10 G Rel 2 on any one Linux Version for me to work and succeed.Anybody can Help me also.
AFTER RE-INSTALLING CENTOS LINUX 5.0 AGAIN, I HAD REPEATED ALL THE STEPS TAKEN FROM A MEMBER OF ORACLE FORUMS AND THIS TIME, WHEN I HAD GIVEN THE COMMANDS
su - oracle
/osource/runInstaller -ignoreSysPrereqs
THIS TIME IT HAD GIVEN THE ERROR AS FOLLOWS:
PERMISSION DENIED
PLEASE TELL ME WHAT SHOULD BE THE PROBLEM AND HOW TO RECTIFY THIS PROBLEM AND INSTALL ORACLE 10g REL 2 ON CENTOS 5.0 LINUX.
Thanks in Advance
Regards,
Srinivas

Hyperion errors after installing Oracle Database 11G

Hello,
The company I work for has a bunch of Oracle databases available, two which I connect to (use to connect to). I have multiple applications that I use to connect to these databases, Hyperion Interactive Reporting Studio 9.3.1 being one of them. I'm using Windows XP as my client.
I made the mistake of installing Oracle Database 11G Express Edition and now I cannot connect to any of the database using my applications, but I can connect to the same databases using SQL Developer. When I try connectiing using Hyperion, I get "SQL NATIVE ERROR [12504] SQL MESSAGE [[INTERSOLV][ODBC ORACLE 8 DRIVER][ORACLE 8][ORA-12504; TNS LISTERNER WAS NOT GIVEN THE SERVICE_NAME IN CONNECT DATA".
When connectiing using other company applications, which use the same database, i get "IM006: [INTERSOLV][ODBC ORACLE 8 DRIVER] DRIVERS SQLSETCONNECTATTRFAILED. UNABLE TO CONNECT TO DATABASE. CHECK USER NAME AND PASSWORD AND TRY AGAIN"
I'm assuming that I updated a driver or registry setting and I need to know how to reverse . I also copied a tnsnames and listerner from an associates computer and placed it in the same location on my computer, but this has not helped at all, even after rebooting the computer.
I even double checked and logged onto anothe computer and I can connect to the database using these same applications, so I definetly messed something up locally on my computer.
Any help is appreciated. Joe.

Probably you could solve odbc driver issues by removing the PATH entry from XE installation.
It looks something like:
Path=C:\oracle\oraclexe\app\oracle\product\11.2.0\server\bin;<remaining paths>
In system variabels settings, edit PATH to remove the "oraclexe" path and semicolon, leaving only <remaining paths>.
However, removing it will likely have an affect on XE usage. But that may be preferred over other apps working.
Edited by: orafad on Oct 12, 2011 2:55 PM

I have Installed Oracle Database 10g Express Edition so i have Problem.....

Hello Friends
I have Installed Oracle Database 10g Express Edition in "Ubuntu Linux" but i have Following Problems:
1.) After i installed Oracle Database 10g Express Edition i gone to
"Application" -> "Oracle Database 10g Express Edition" -> "Run SQL Command Line"
SQL Window has been opened there i have typed "SELECT * FROM tab;" here i got Warning Messg of
"SP2-0640: Not connected"
2.) From There i have Again gone to
"Application" -> "Oracle Database 10g Express Edition" -> "Start Database"
i got Warning Messg of "Operation Failed. venu is not a Member of DBA Group"
3.) Finally i want Solution For "How to get Connected in "Oracle Database 10g Express Edition"
Please Post the Answer As Soon As Possible ...
From Venu(INDIA)

Was the oracle-xe configure completed successfully?
Are the pmon and listener processes running ... set your environment and connect via sqlplus if so. If no processes, the instance needs a startup.
$ ps -ef |egrep pmon
oracle ... ora_pmon_XE
$ ps -ef |egrep lsnr # can also check the listener status, see below
oracle ... /usr/.../tnslsnr ...
$ lsnrctl status
Endpoints Summary ...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=<your hostname>)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=http) ... (PORT=8080)))
...In the ORACLE_HOME/bin directory there is a shell script you can source to set up your environment variables for connecting to the database. The full path to the .sh should be revealed by the tnslsnr process, /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.sh
$ /usr/.../oracle_env.sh
$ sqlplus /nolog
SQL> connect system
Password: ...
Connected.
SQL> select status from v$instance;
STATUS
OPENThe oracle user created by the configure won't have a known password set. Set it and switch user to the oracle login. If you don't want to muck about with the oracle user, at least add your user to the dba group so that you can connect with the sysdba privilege when needed.
Edited by: clcarter on Feb 22, 2011 7:06 AM

How can I install Oracle Database 10g for Solaries (SPARC) from the console

Dear Forum Members,
In my office, I have to installed Oracle Database 10g for Solaries (SPARC). But I have to do it without DISPLAY Monitor.Is it possible install it by remote login to this server using response file (silent mode) or something like that?
If yes. Then How?
If anyone have the exact solution, then I need your feedback. I shall wait for your reply.
Thanks
Aungshuman Paul

There are 2 possible ways to accomplish this.
First,
Silent installation
http://www.informit.com/articles/article.asp?p=174771&rl=1
Second, (cut/paste from other site)
How to install Oracle software remotely?
Remote Software Installation Steps: (For Solaris only)
If you want to install Oracle Software remotely, you should perform the following steps. These steps are applicable only if your source and target machine are running Unix.
For example, you can install Oracle Software from your home from Washington, DC to a target source in California.
1. Pick your source server or machine for remote installation.
2. Check that your CD is in your source CD-ROM drive.
3. On the target machine, find your target machine name with the output of the /usr/bin/hostname
4. On the source machine, login as a user.
5. On the source machine, enable client access: % /usr/openwin/bin/xhost + target-machine-name
6. Become root user by typing: su (dont use -)
7. Check that Volume Manger is running. # ps ef |grep vold (if you see an entry that contains /usr/sbin/vold, Volume Manager is running. Then skip to Step 10.
8. If not then do the following: # mkdir p /cdrom/your-cd-file-name
9. # mount F hsfs r cdrom-device /cdrom/your-cd-file-name
10. Add the following line to your /etc/dfs/dfstab file: # share F nfs o ro /cdrom/your-cd-file-name
11. Verify whether your source machine is an NFS server: # ps ef | grep nfsd
12. If you see an entry that contains /use/lib/nfs/nfsd a 16, then nfsd is running and skip to Step 16.
13. If nfsd is running, then type: # /usr/sbin/shareall
14. If nfsd is not running, then start nfsd by typing: # /etc/init.d/nfs.server start
15. Verify whether your source machine is an NFS server again by typing: # ps ef | grep nfsd
16. Make sure your source machine is exporting your product directory by typing: # /usr/sbin/dfshares
17. Now, log in to the target machine by type: # rlogin target-machine-name l user (not root)
18. Then log in as the root user by typing: # su
19. Go to the source machine by typing: # cd /net/source-machine/cdrom/your-cd-file-name ,then Skip to 24.
20. If you cannot change to that directory in Step 19 and you do not have an auto-mounter on your network, then create amount point by typing the following commands.
21. # mkdir /remote_products
22. # /usr/sbin/mount F nfs r source-machine:/cdrom/your-cd-file-name /remote_products
23. # cd /remote_products
24. Redirect the target machine display to source machine by typing: # DISPLAY=source-machine:0; export DISPLAY (if you use a Bourne or Korn shell).
25. Start the Web Start Installer by typing: # ./installer (or whatever the installer name program is).

Error while installing Oracle Database Lite 10.2.0.1.1 for Win

Hello,
I am trying to install Oracle Database Lite 10.2.0.1.1 on Windows XP. I am going according screens on this page:
http://www.oraclebrains.com/2008/07/installing-oracle-database-lite-10g-release-3-mobile-server/
But at Step:12 - Mobile Server repository Wizzard after password enter I get error --- Io exception: The Network Adapter could not establish the connection. May I insert specific password for Username SYSTEM? Or where is problem?
Thanks for hint
David

Hi,
I have the same problem but, how can i know what my SID is ? i am trying with "ORCL" and it doesnt work.
Do you know in which file i can get it ? in the documentation of the installation i found this:
"If you are not sure of the values to enter for the URL, then you can query the data dictionary to obtain these values.
Connect as SYSTEM and run the following queries.
To retrieve the SID, execute: select instance_name from v$instance;
If you need to retrieve the port number, check the listener.ora file on the
back-end database."
But how can i query the database if i have not finished to install it yet and where is located the listener.ora file ?
I hope you can help me.
Thank you.

I met problem when installing Oracle 8.1.6 on Turbo Linux 7.0

I met problem when installing Oracle 8.1.6 on Turbo Linux 7.0.
After setting up environment variables, and successfully
accessed KDE interface, everything was going on well.
The process of installation blocked at 80% in "Database Creation
Process" dialog window.
I have tried two times and got the same result.
The error message is:
Warning: Cannot convert string "-*-Kochi Gothic-medium-r-normal-
*-*100...
Help!

I have done some oracle installations over RedHat 7.0 (not certificated):
Let's check some things:
1- You must have changed very few parameters on your shm.h sem.h files which are in /usr/include/linux directory.
2- You need to upgrade the glibc and libstdc libraries (.rpm)
3- You must have installed the jre116_v5 on /usr/jre and made a symbolic link like this
ln -s /usr/jre/jre116_v5 /usr/local/jre
4- You must include in the CLASSPATH parameter the jre116_v5 directory. It should look something like this
CLASSPATH=/usr/jre/jre116_v5:$ORACLE_HOME/jlib
5- Be sure to create and export all the parameters in your .bash_profile.
6- Run the ./runInstaller.sh in a terminal window inside the Xwindow.
You can find the jre116_v5 in www.backdown.org
I hope these tips help you
<BLOCKQUOTE>quote:<HR>Originally posted by xx:
Hi every body
when I run ./runInstaller from cdrom
I get this messages :
Initializing Java Virtual Machine from /usr/local/jre/bin/jre.Please wait ...
Error in CreateOUIProcess ():-1
: Bad Address
I use JDK-1-1-6.
Thx<HR></BLOCKQUOTE>
null

How to install oracle database 11g express edition on Windows 7

Hi Guys,
i am trying to download and install Oracle database 11g express edition on windows7 and i can't seem to get it right. i did get the download but when i try to install, it keeps saying it appears to be an invalid archive.
Please help..

Action - Refer to the logs or contact OracleFinding the problem is the key. "Refer to the logs" is the only option, XE has no oracle support offerings.
Which plugin failed, and why did it fail will be important clues. There should be error messages in the log that will be helpful.
Otherwise, we don't have much help to offer. Fixing a problem means identifying the problem and performing steps to correct it, if there a fix is available.
A MOS lookup on the ins-20802 error has snippets from one installer session, this one is from an x64 install. Not x86. To paraphrase the details:
... Created a new file <drive>:<OH path>\cfgtoollogs\configToolAllCommands
SEVERE: java.io.IOException: Access is denied
...So from those symptoms, the user trying to run the installer does not have appropriate rights on that drive and/or folder. The fix for that particular problem is adding the user to the local administrators group. And rerunning the install. After running the deinstall steps to clean up the installation. As specified in the XE install guide for Windows.
http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm
Also note the System Requirements, it specifies a System architecture Intel x86, which is not X64. There is no X64 installer for XE on Windows. So it might work. Or it might not if your host is x64.
So if that is your particular error, verify that your user is in the local admins group. Either use the local users and groups applet (Start/Run/lusrmgr.msc) and open up the Administrators group. Click the Add button. Find your user. If your OS user is a windows domain user, be sure you have authenticated to the domain.
Try the `net ...` list of the adminis group, that should reveal whom is indeed in the local administrators group:
net localgroup administrators
Administrator
<domain>\Domain Admins ... # ??? is the host in windows domain ???
<domain>\Local Admins
<domain>\<user1>
<user2>
<user3>
echo %USERNAME%
# if relevant:
echo %USERDOMAIN%Like it also states in the Windows install guide, under Permission Required quote:
... must be a member of the Administrators group on Windows to install Oracle Database XE.

Installing Oracle Database Express Edition 11g on UBUNTU

Hello everyone,
I want to install Oracle Database Express Edition 11g on UBUNTU. I followed the steps from this link created by Dude:
https://forums.oracle.com/thread/2303639?start=0&tstart=0
My problem becomes when I type in from the terminal:
sudo /etc/init.d/oracle-xe configure
I followed the instructions there, agreeing t HTTP port 8080, port database listener 1521, specifying a password for my database account, and wanting Oracle Express to be started on boot. This is what I'm getting:
Starting Oracle Net Listener...touch: cannot touch `/var/lock/subsys/listener': No such file or directory
Done
Configuring database...
Database Configuration failed. Look into /u01/app/oracle/product/11.2.0/xe/config/log for details
I have no idea what this means, so I went into the log's location and I found 4 of them, so I clicked on each of them, and this is what I'm getting:
1. cloneDBCreation.log:
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
ORA-00845: MEMORY_TARGET not supported on this system
Create controlfile reuse set database "XE"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter system enable restricted session
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database "XE" open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database rename global_name to "XE"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter system switch logfile
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter system checkpoint
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
2. CloneRmanRestore.log
ORA-00845: MEMORY_TARGET not supported on this system
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
declare
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
3. postDBCreation.log
begin
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
File created.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
ORA-00845: MEMORY_TARGET not supported on this system
select 'utl_recomp_begin: ' || to_char(sysdate, 'HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
BEGIN utl_recomp.recomp_serial(); END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
select 'utl_recomp_end: ' || to_char(sysdate, 'HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
4. postScripts.log
CREATE OR REPLACE LIBRARY dbms_sumadv_lib AS '/u01/app/oracle/product/11.2.0/xe/lib/libqsmashr.so';
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
BEGIN dbms_datapump_utl.replace_default_dir; END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
commit
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
create or replace directory XMLDIR as '/u01/app/oracle/product/11.2.0/xe/rdbms/xml'
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
DROP DIRECTORY ORACLE_OCM_CONFIG_DIR
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
DROP DIRECTORY ADMIN_DIR
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
DROP DIRECTORY WORK_DIR
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
BEGIN dbms_swrf_internal.cleanup_database(cleanup_local => FALSE); END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
commit
Can somebody that knows this, or has installed Oracle Express on Ubuntu, to please explain it to me what does it mean and why am I getting those errors. Please explain thoroughly as if I am an amateur person, IN DETAIL, STEP-BY-STEP. I want to run it and make it work! I heard that it encourages people to answer for points. I am open for your suggestions and experiences, as long as it's not 'use common sense', 'you're dumb', or an answer that is vaguely explained. Thank you for those that take the time to read it.
ec557fac-f825-4356-a220-1ec941ce7cd0

Hi Pradeepcmst,
Thanks for your suggestion, but I found it sometimes misunderstanding on what he's trying to say - his instructions are not step-by-step and precise. Instead, I found this link that helped me a lot:
Installing Oracle 11gXE on Mint and Ubuntu | The Anti-Kyte

Can't succesfully install Oracle Database 10g Express Edition on Ubuntu

Hi,
I've been trying to install Oracle Database 10g xe on Ubuntu 10.04 and when I execute the .deb package (oracle-xe-universal_10.2.0.1-1.0_i386.deb) I get a quick installation that doesn't ask me for any configuration settings. When the installation is finished I don't get any menu in my Applications menu named "Oracle Database 10g Express Edition" as specified in Getting Started Guide (I only get some items grouped into an category called "Other" (Backup Database, Get Started, Get Started With Oracle Database 10g Express Edition, Go To Online Forum, Read Documentation, Read Online Help, Register For Online Forum, Restore Database, Run SQL Command Line, Start Database and Stop Database). As a consequence I can't access the Oracle Database Home Page.
In addition when I click on Start Database I get the following message: "Operation failed. josep is not member of 'dba' group".
I've tried to re-download the packages and to configure it by editing /etc/init.d/oracle-xe but this doesn't solve my problem.
can you give me some help?
Thabk you in advance!

Markus Waldorf wrote:
Did you run the post-installation?
$ sudo /etc/init.d/oracle-xe configureYes I've done it but it doesn't seem to work...

Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
Hassan

You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet.

The problem of installing oracle database 9.2.0 on Redhat 7.2

Similar Messages

Maybe you are looking for