The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library C:Program Files/x86/itunes.dll.

I'd download the latest ITunes and I started it and it has this error message:
"The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library C:Program Files/x86/itunes.dll"
I reinstalled ITunes several times and it got the same message. Please help.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
I've not seen this message before, but it has the same pattern as those discussed in the first and third boxes, suggesting that you've got an outdated .dll file that needs replacing. You should find iTunes.dll in the iTunes folder in Program Files or Program Files (x86). Delete it and then repair iTunes from the control panel. If that doesn't work go for the full tear down and rebuild.
tt2

Similar Messages

Recently tried to update iTunes 12.0.1 and got this error message: The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll.

I recently tried to update iTunes to 12.0.1 and got this error message:
The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll.
After that, I get: iTunes did not install properly. Reinstall iTunes.
I tried downloading iTunes again (without uninstalling it) and it won't download.
Any suggestions?

Thanks so very much, I have been looking for an answer to this for
almost a week and just thought i'd look again and in 2 minutes my iTunes opened YIPPEE
I must have installed deleted everything in order at least 15 times
Is there anyways this cane get pinned to stay at top as it works and save people ploughing
through post after post which is just asking the same question.
Off to back up and I Cloud back up and see how it works without sidebar
again thank you

Updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error

updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error. Tried suggested steps
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Still getting same error message. Can anyone help me

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

What do I do when I try to open Fifrefox 4 & get the message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll?

2 days ago, I got a message about upgrading to Firefox 4.0. I didn't do it immediately, due to lack of time. Later that day, I tried to open Firfox & got the message: Firefox can't start because xul.dll is missing. Reinstall the program to fix this. I tried several times to open Firefox & got the same result. I tried rebooting. Same result. So I opened Internet Explorer & went to the Firefox website & followed the instructions to download Firefox 4. After that, I used it last night & left my laptop hibernating last night, then continued to use it this morning. Then I closed Firefox. When I next tried to reopen Firefox, I got the new message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll. Again, I can only access the internet with Internet Explorer. Also, I have a done a good many Windows updates over the last 2 days as well. What can I do to get Firefox to open? Thank you for your help.

This is what I did to resolve this problem. First, I uninstalled Firefox 4 & removed the Firefox folder left behind. I made sure to NOT select the option to delete personal information. Next, I backed up all of the important files on my computer. Next, I upgraded my Windows 7 to Service Pack 1, which was pending in my updates folder. Then, I went to Mozilla's website & downloaded Firefox 4 again, making sure to select only the Firefox browser and not Thunderbird too. http://www.mozilla.org/ When prompted to close any open programs, I closed Internet Explorer (which I had used to get to the Mozilla website) and I disabled my Norton anti-virus. I then completed the installation & it works just fine now. It loaded all of my personal data, such as bookmarks, it remembered my password, etc. It's fine for my needs, as I'm not a heavy user of special add-ons & plug-ins. Some of those may not work yet with the new version.

I can no longer start FF and am getting this error message in a pop up box: The procedure entry point XRE_FreeAppData could not be located in the dynamic link library xul.dll. How do I resolve?

Please help

Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is su

After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
== This happened ==
Every time Firefox opened
== I installed a new version ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)

If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update.

While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.

While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.

I faced the same issue. This solved it for me: Troubleshooting issues with iTunes for Windows updates
Hope this helps.

When starting Windows 7 Sync Notifier reports "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Any suggestions as to how to rectify this issue?

When starting Windows 7 Sync Notifier reports "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Any suggestions as to how to rectify this issue?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

My problem is on my Windows PC. I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I am told this is related to iTunes. Any help?

I use both a Mac and a PC. My problem is on my Windows 7 PC. I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I am told this is related to iTunes. Any help out there? Thanks

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll

On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have to clear this everytime I boot up?

With that one, perhaps first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?

Error messages - DDE Server Windows itunes.exe - Entry point Not found and iTunesHelper.exe - The procedure entry point asl_add_log_file could not be located in the dynamic link Library ASL.dll

Hi
I have tried to research these problems I am getting, but have not been able to resolve them.
1st is the above DDE Server Windows iTunes.exe - entry point not found.
This only occurs when I try to start iTunes.
if I click ok , several times, iTunes will start but slowly.
If at any time I have to reboot my computer I get
iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
if I click 3 times OK it goes away.
To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
Installing it but still get the same errors on reboot and trying to run iTunes
Anyone any ideas please.
I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
Ram 4.00GB
32bit OS
Windows 7 Ultimate SP1
Firewall - Zonealarm
Virus - Zonealarm
Thanks in advance
Steve
Message was edited by: Ybslik
Message was edited by: Ybslik

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help!

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??

Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder"

When I turn on my computer,an error message says "AppleSyncNotifier.exe-entry point not found The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll". Can't access itunes store,sync,buy etc. Help...

When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. Any thoughts?

I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
Any thoughts?

Found this fix here which worked for me with a similar problem.
https://discussions.apple.com/thread/3196594?start=0&tstart=0
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.

Since updating to 10.4 getting error message on startup 'AppleSyncNotifier.exe – Entry Point Not Found, The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'. How do I fix this annoying problem?

Since updating to 10.4 I've been getting this error message on computer startup
'AppleSyncNotifier.exe – Entry Point Not Found
The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'.
Please help me fix this annoying problem?
belle

This is the fix I got from discussions and it worked for me. It is copied below. I just did the manual fix which I have underlined. Good luck! Regards, Belle.
This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
If it isn't, though, here's the manual fix:-
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.
I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him.

The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library C:Program Files/x86/itunes.dll.

Similar Messages

Maybe you are looking for