The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERNEL32.dll
I tried to download Photoshop CS6, but when I tried to open it said "The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERNEL32.dll." I dont know what to do HELP PLEASE!
Branched this off to a new discussion. Maza255 please make sure you meet the minimum system requirements for Photoshop CS6 - http://www.adobe.com/products/photoshop/tech-specs.html.
Similar Messages
-
Here's my problem, until yesterday my firefox browser is fine, unless sometimes when i playing games/app in facebook the plugin keep crashing but thats okay i can stop it and reload my firefox.
But now everytime i try to open firefox it displaying the error massage:
firefox.exe - entry point not found
The Procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library Kernel32.dll
I try to uninstall firefox, and reinstall again.
i have to use internet explorer and torch browser, which don't fit me and make me in pain.
i try to run in firefox safe mode, according to some suggestion here, but it wouldn't allow me to open Safe Mode (i even holding the Shift button when clicking on firefix icon)
Can you guys help me in here?
Iam using windows xp.
Thank you so much in advance, GBU all :)hi, do you have service pack 3 installed on your xp computer?
-
The above mentioned error is displayed when i open Adobe Framemaker 12 after installing it.
the procedure entry point getlogicalprocessorinformation could not be located in the dynamic link kernel32.dll
this is the error.
my os is windows service pack 2
2 gb ramYou don't mention which specific version of the operating system that you are using - Windows XP, Vista, or 7 and whether you're using a 32-bit or 64-bit version.
FWIW, kernell32.dll is a Windows system-level module, so it's possible that you have some corruption in your Windows installation which is preventing FM from launching.
Also, 2Gb of RAM is a bit lean for FM. -
I am having trouble updating my operatI am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in the dynamic link library SQLite3.dll" Any ideas what my problem is?
Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy -
Why does this message pop up on my PC after i start up " (AppleSyncNotifier.exe-Entry Point Not Found ) the procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQlite3.dll. ? What can I do to fix this problem ?
Found this several months ago when I updated ITunes. I don't know why they still haven't fixed this, but I had to do this again yesterday 10/13/2011 when I updated.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear. -
2 days ago, I got a message about upgrading to Firefox 4.0. I didn't do it immediately, due to lack of time. Later that day, I tried to open Firfox & got the message: Firefox can't start because xul.dll is missing. Reinstall the program to fix this. I tried several times to open Firefox & got the same result. I tried rebooting. Same result. So I opened Internet Explorer & went to the Firefox website & followed the instructions to download Firefox 4. After that, I used it last night & left my laptop hibernating last night, then continued to use it this morning. Then I closed Firefox. When I next tried to reopen Firefox, I got the new message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll. Again, I can only access the internet with Internet Explorer. Also, I have a done a good many Windows updates over the last 2 days as well. What can I do to get Firefox to open? Thank you for your help.
This is what I did to resolve this problem. First, I uninstalled Firefox 4 & removed the Firefox folder left behind. I made sure to NOT select the option to delete personal information. Next, I backed up all of the important files on my computer. Next, I upgraded my Windows 7 to Service Pack 1, which was pending in my updates folder. Then, I went to Mozilla's website & downloaded Firefox 4 again, making sure to select only the Firefox browser and not Thunderbird too. http://www.mozilla.org/ When prompted to close any open programs, I closed Internet Explorer (which I had used to get to the Mozilla website) and I disabled my Norton anti-virus. I then completed the installation & it works just fine now. It loaded all of my personal data, such as bookmarks, it remembered my password, etc. It's fine for my needs, as I'm not a heavy user of special add-ons & plug-ins. Some of those may not work yet with the new version.
-
Please help
Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?
-
After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
== This happened ==
Every time Firefox opened
== I installed a new version ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update. -
While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.
I faced the same issue. This solved it for me: Troubleshooting issues with iTunes for Windows updates
Hope this helps. -
When starting Windows 7 Sync Notifier reports "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Any suggestions as to how to rectify this issue?
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
I use both a Mac and a PC. My problem is on my Windows 7 PC. I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I am told this is related to iTunes. Any help out there? Thanks
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have to clear this everytime I boot up?With that one, perhaps first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?
-
Hi
I have tried to research these problems I am getting, but have not been able to resolve them.
1st is the above DDE Server Windows iTunes.exe - entry point not found.
This only occurs when I try to start iTunes.
if I click ok , several times, iTunes will start but slowly.
If at any time I have to reboot my computer I get
iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
if I click 3 times OK it goes away.
To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
Installing it but still get the same errors on reboot and trying to run iTunes
Anyone any ideas please.
I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
Ram 4.00GB
32bit OS
Windows 7 Ultimate SP1
Firewall - Zonealarm
Virus - Zonealarm
Thanks in advance
Steve
Message was edited by: Ybslik
Message was edited by: YbslikTaken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder" -
When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck
Maybe you are looking for
-
Need month in inwards instead of number
Hi All, We need month in inwards (like January) instead of in number and this is an user input, we havent maintained text for the months .we are looking is there any possibility of writing VBA coding to display month in inwards. Also we have user in
-
I can't get minibridge or Bridge working on my CS6 photoshop
I can't get my bridge or mini bridge working in my CS6 photoshop
-
Since purchasing my iPhone 5 one year ago, I'm unable to leave reviews for any app
I purchased my iPhone 5 one year ago. Since then I can't leave a review for any app. I contacted iTunes & they said it was the particular app. However, it's every single app. I can't leave a review for any at all. What's up? Is there something that's
-
Show Hide Few columns rows in a report
Hi All, I had requirement to develop an application having a report and based on some condition we need to hide or show few rows on clicking. Please view this report [here |http://apex.oracle.com/pls/otn/f?p=33897:1] For example if I give CUSTOMER_ID
-
To display drill down values in the same table
Dear Friends, Suppose if you apply drill down on one object, it wont appear upper level values of that perticular object. If you want to display all levels of values in the same report during drill down.