The procedure entry point lnxnfft2 could not be located in the dll oracore8.dll

We had installed Oracle9iAS. We had not installed certain
optional tools such as Oracle Portals etc.
Now we had an application running on Tomcat earlier.
We were trying to port it into the Oracle9iAS.The application
was using Type 1 drivers(ie, used DSN on the local machine).
However after the installation while running the application the
following error occurs.
"The procedure entry point lnxnfft2 could not be located in the
dll oracore8.dll"
Could you help please.And please explain why it is happening and
how do i resolve it.??

Metalink note 398937.1

Similar Messages

Procedure entry point psoasyn could not be located in orapls.dll

hello every one,
I am run the report and show the folowing error.
procedure entry point psoasyn could not be located in orapls.dll !
help me for that..

Thanks,
I set the path to
PATH=my_ora_home_dir\bin;my_ora_home_dir\jdk\jre\bin;my_ora_home_dir\jdk\jre\bin\classic;my_ora_home_dir\jdk\jre\bin\classic;my_ora_home_dir\jlib;my_ora_home_dir\jdk\bin
and it worked without ay errors.
(here my_ora_home_dir is the Oracle Home where the Reports 10g is installed)
One thing I noticed is, the path was already there, but a new Oracle Home was before everything else (I installed another product recently) , so it was looking in the new oracle home and giving up if it cannot find.

Error when trying to start iCS 2.x -- "the procedure entry point _chkesp could not be located in MSVCRT.dll"

When starting the iPlanet Calendar Server(iCS) 2.x on Windows NT, the following
error occurs: 

The procedure entry point _chkesp could not be located in the dynamic link
library MSVCRT.dll

There are two ways to ensure that you have the correct version of the
MSVCRT.dll file. 

<OL>
<LI>Install the latest Netscape Communicator browser, which will update the
MSVCRT.dll file to the
correct version.

<LI>Copy the MSVCRT.dll
file from a system that has the latest Communicator browser to the iCS
system.
</OL>

The calendar server should now start up.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
Not an error message I recognise personally but the error has the same pattern as those discussed in the first and third boxes, suggesting that you've got an outdated .dll file that needs replacing. You should find AVFoundationCF.dll in the Apple Application Support folder. Delete it and then repair Apple Application Support. If that doesn't work go for the full tear down and rebuild.
tt2

Firefox wont start. Gives error: The procedure entry point PL_ClearArenaPod could not be located in plds4.dll

Complete text of error message when attempting to start Firefox.
The procedure entry point PL_Clear ArenaPod could not be located in the dynamic link library plds4.dll
Firefox never opens before or after the error message.
After I close the error message window, I also get message from ZoneAlarm (my security software) asking me to send them an error report.
I had just accepted an automatic update from Firefox prior to the problems occurring.

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Please Help.. have spend hours unistalling itunes on my pc and redownloading itunes and every single time i am getting a "The procedure entry point AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not be located n AVFoundationsCF.dll

ugh...can anyone help me reload itunes on my pc...itunes 10 worked fine but I uninstalled it when i was having problems loading itunes 11...I am not sure how to correct my procedure entry point error...i have used my uninstall programs on my control panel numerous times to unistall my itunes and quik time downloads and every single time i shut down and reinstall them I am getting this same procedure entry point error...is there something else i can do ??? ugh !!!

See Troubleshooting issues with iTunes for Windows updates.
tt2

What does this message mean on my PC " the procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQlite3.dll.

Why does this message pop up on my PC after i start up " (AppleSyncNotifier.exe-Entry Point Not Found ) the procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQlite3.dll. ? What can I do to fix this problem ?

Found this several months ago when I updated ITunes. I don't know why they still haven't fixed this, but I had to do this again yesterday 10/13/2011 when I updated.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.

What do I do when I try to open Fifrefox 4 & get the message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll?

2 days ago, I got a message about upgrading to Firefox 4.0. I didn't do it immediately, due to lack of time. Later that day, I tried to open Firfox & got the message: Firefox can't start because xul.dll is missing. Reinstall the program to fix this. I tried several times to open Firefox & got the same result. I tried rebooting. Same result. So I opened Internet Explorer & went to the Firefox website & followed the instructions to download Firefox 4. After that, I used it last night & left my laptop hibernating last night, then continued to use it this morning. Then I closed Firefox. When I next tried to reopen Firefox, I got the new message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll. Again, I can only access the internet with Internet Explorer. Also, I have a done a good many Windows updates over the last 2 days as well. What can I do to get Firefox to open? Thank you for your help.

This is what I did to resolve this problem. First, I uninstalled Firefox 4 & removed the Firefox folder left behind. I made sure to NOT select the option to delete personal information. Next, I backed up all of the important files on my computer. Next, I upgraded my Windows 7 to Service Pack 1, which was pending in my updates folder. Then, I went to Mozilla's website & downloaded Firefox 4 again, making sure to select only the Firefox browser and not Thunderbird too. http://www.mozilla.org/ When prompted to close any open programs, I closed Internet Explorer (which I had used to get to the Mozilla website) and I disabled my Norton anti-virus. I then completed the installation & it works just fine now. It loaded all of my personal data, such as bookmarks, it remembered my password, etc. It's fine for my needs, as I'm not a heavy user of special add-ons & plug-ins. Some of those may not work yet with the new version.

I can no longer start FF and am getting this error message in a pop up box: The procedure entry point XRE_FreeAppData could not be located in the dynamic link library xul.dll. How do I resolve?

Please help

Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is su

After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
== This happened ==
Every time Firefox opened
== I installed a new version ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)

If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update.

While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.

While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.

I faced the same issue. This solved it for me: Troubleshooting issues with iTunes for Windows updates
Hope this helps.

When starting Windows 7 Sync Notifier reports "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Any suggestions as to how to rectify this issue?

When starting Windows 7 Sync Notifier reports "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Any suggestions as to how to rectify this issue?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

My problem is on my Windows PC. I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I am told this is related to iTunes. Any help?

I use both a Mac and a PC. My problem is on my Windows 7 PC. I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I am told this is related to iTunes. Any help out there? Thanks

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll

On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have to clear this everytime I boot up?

With that one, perhaps first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?

Error messages - DDE Server Windows itunes.exe - Entry point Not found and iTunesHelper.exe - The procedure entry point asl_add_log_file could not be located in the dynamic link Library ASL.dll

Hi
I have tried to research these problems I am getting, but have not been able to resolve them.
1st is the above DDE Server Windows iTunes.exe - entry point not found.
This only occurs when I try to start iTunes.
if I click ok , several times, iTunes will start but slowly.
If at any time I have to reboot my computer I get
iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
if I click 3 times OK it goes away.
To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
Installing it but still get the same errors on reboot and trying to run iTunes
Anyone any ideas please.
I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
Ram 4.00GB
32bit OS
Windows 7 Ultimate SP1
Firewall - Zonealarm
Virus - Zonealarm
Thanks in advance
Steve
Message was edited by: Ybslik
Message was edited by: Ybslik

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help!

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??

Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder"

The procedure entry point lnxnfft2 could not be located in the dll oracore8.dll

Similar Messages

Maybe you are looking for