The procedure entry point_objc_init_image could not be located in the dynamic link library objc.dll
Please can you explain what this is the procedure entry point_objc_init_image could not be located in the dynamic link library objc.dll
I am having the same problem.
There is another link conversation going on with this. One suggestion was to open Itunes, click the help button and click updates. This is supposes to open a windown with Iclould and itunes update but that did not work for me!
I am continuing to search the Community Support area.
Similar Messages
-
received error message - the procedure entry point_objc_init_image could not be located in the dynamic link library objc.dll. unable to launch iCloud. Any suggections?
I had roughly the same error. I fixed it by running the iCloud control panel update from apple software update. The problem cropped up after I ran the most recent iTunes update, I've personally been having issues with iTunes updates being finicky since upgrading to Windows 8.1, I've had to download installers rather than running the update directly through Software Update, so it's possible Apple is not fully addressing compatibility issues for newer versions of Windows. Ultimately it seems to be a missing file issue, so any update, installer, or install verification/repair that directly addresses the iCloud files should see and replace the missing file.
Also it looks like Apple is either unaware of this problem or not addressing it at all, there are about a dozen support requests from within the last month all asking this same question regarding iCloud, just with different specific files unable to be found. None of them have answers.
Hopefully this works for you -
the procedure entry point_objc_init_image could not be located in the dynamic link library objc.dll. How do I fix?
I am having the same problem.
There is another link conversation going on with this. One suggestion was to open Itunes, click the help button and click updates. This is supposes to open a windown with Iclould and itunes update but that did not work for me!
I am continuing to search the Community Support area. -
I tried to update Itunes on my desktop computer and for some reason it did not work properly. I am receiving the following message:
"the procedure entry point_objec_ init_image could not be locaed in the dynamic link library objc.dll. can you help?For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
The procedure entry point_objc_init_image could not be located in the dynamic link
Help please!!!
Welcome,
See: https://discussions.apple.com/message/24993884#24993884
May not help as it was for iCloud but may be related!
Regards,
Shawn -
When I start up my laptop I get an error message that says 'The Procedure entry point_NSConcreteStackBlock could not be located in the dynamic link library CoreFoundation.dll. I have tried to uninstall itunes and all its files, I have tried to install safari, i have tried to repair Apple application support but still when I boot laptop, I get the message....I am at a loss as to what will cure this!
You should have one copy of CoreFoundation.dll in C:\Program Files\Common Files\Apple Application Support or C:\Program Files (x68)\Common Files\Apple Application Support if this is a 64-bit Windows.
The detailed file properties should be as shown.
If the file you have is correct check to see if there is another copy in the main iTunes folder. If so delete it and see if that helps.
Otherwise try uninstalling/deleting folders/reinstalling iTunes again. See Troubleshooting issues with iTunes for Windows updates for more details. Your issue looks a bit like it might be a variation of the issue in the first box.
Also worth checking that you have uninstalled the MobileMe control panel and any third party software that might try to talk to iTunes.
tt2 -
I am getting an iCould error message at PC startup: The procedure entry point_objc_init_image could not be found in the dynamic.....
i ahve same problem
-
when I start firefox browser an erroe message appear that contain this text "the procedure entry point_except_handler4_common could not be located in the dynamic link library msvcrt.dll" I am using windows XP in English
== This happened ==
Every time Firefox opened
== start mozila firefoxThis issue can be caused by a problem with the file c:\windows\system32\dwmapi.dll
The file dwmapi.dll is a Vista file and should not be present in Windows XP.
See also [tiki-view_forum_thread.php?forumId=1&comments_parentId=417674] -
my itunes on my laptop (not a mac) has an error message that reads "the procedure entry point_objc_load_image could not be located in the dynamic link library.objc.dll" then another window will come up telling to to uninstall the apple mobile and itunes and reinstall them? will this delete everythin in the itunes account? please help
This might help https://discussions.apple.com/thread/5821701
-
I simply wanted to update my itunes and this is now the error message I get and can't access or even log into itunes or itunes store.
"itunes.exe - Entry Point Not Found" "The procedure entry point_dispatch_queue_attr_concurrent could not be located in the dynamic link library libdispatch.dll."???? What does this mean?
Anyone have a solution?This error has the same pattern as those discussed in the first and third boxes of the user tip Troubleshooting issues with iTunes for Windows updates, suggesting that you've got an outdated .dll file that needs replacing. You should find libdispatch.dll in the one of the following folders:
C:\Program Files\Common Files\Apple\Apple Application Support
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
Delete it and then repair Apple Application Support from the control panel. If that doesn't work go for the full tear down and rebuild as outlined in the second box.
tt2 -
I am having trouble updating my operatI am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in the dynamic link library SQLite3.dll" Any ideas what my problem is?
Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy -
The Procedure entry point Could not be located in the dynamic Link Library
I have recently received an error message that starts out with "The Procedure entry point XXX Could not be located in the dynamic Link Library" and then I get an Error 7 (Windows error 127). iTunes will not start. I have uninstalled all Apple programs and then re-installed them. Still no luck. I am running Windows 8.1. I have tried systen restore too but with no luck.
Any solutions or suggestions. This only started this evening when I tried to open iTunes!There are several different scenarios that could lead up to the error, but typically it arises because an older version of the .dll has been copied into the wrong folder to workaround a different problem, and now after updating iTunes the outdated .dll that gets called cannot handle the request made of it.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The first box outlines the fix I suggested back in January. For some people it is all they need to do.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I just updated Firefox and restarted.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox -
itunes sync is not working on a new device, tried to update to itunes 11.1 but this error keeps showing up now, and when I connect the ipod it says "itunes requires a newer version of the Mobile Device Support.
To run a CVI application on a system were the CVI IDE is not installed you need to have the CVI RunTime Engine installed. According to the error message at the bottom of this page you may have an older RTE installed in the target system.
To obtain it you can either download the RTE and install in the target system or better let the IDE build a distribution disk that installs all necessary software in it: this guide drives you in creating the appropriate installer for your application: you can find it also in CVI help function.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
New install - Win 8.1 - First run error.... trying to do some work for lifemasters.co.za - so testing it out....
if using audition 7, is it patched to 7.2? it sounds like that file is corrupt, unless someone here knows otherwise. adobe doesn't appear to take advantage of "the cloud" to repair installations or files, so if that file or the installation is corrupt you would need to do an uninstall and reinstall.
Use the CC Cleaner Tool to solve installation problems
Maybe you are looking for
-
Can you copy the Temperature in Delivery Note to Bulk Shipment document?
Is there a way to copy the temperature inputted in the "Qty in Alternate UOM" tab in the item details of the Delivery Note to the Bulk Shipment document during the Change Loading confirmation process? One of our process requirements is to be able to
-
Combining package configuration and Execute SQL task at run time
Hi everyone, I have an issue regarding setting values at run time I use package configuration to manage different enviroments scenarios (DEV, PROD): XML file to store the connections string of SSISConfigDB and the actual values of parameters in that
-
How to set a Buffered Reader equal to another?
Just as i,j do in this example: for (int i=0; i<num; i++) {for (int j=i; j<num; j++) }I have 2 BufferedReader, cycling through a file:try { BufferedReader reader1 = new BufferedReader (new FileReader (fname)) ; BufferedReader reader2 = new Bu
-
Downloading photos take an eternity
I tried to download photos in phototheque and the importation seems to stop at the midlle (as I look on the litlle bar) I can't finish my importations I must use Force to quit..!
-
Why did my airtunes fail after updating to iOS 5.0
I used to be able to play most anything from my iPad to either of my Airport Express units and the speakers atteched to them. After iOS 5.0 update to my iPad 1, i am no longer able to do so. The setup still works correctly with itunes on laptops in t