The program can't start because MSVCR80.dll is missing
When I brought up my laptop I was prompted to update i-tunes. The download went bad for whatever reason and now I can not access i-tunes. If I click on the icon I get this error message "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." When I unistall and then try to re-install itune I get this message during the process "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify you have sufficient privileges to start sustem services." HELP. I have not changed anything since my last time on the computer but now I am unable to access/dowload itunes to backup my phone and play my music.
iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.
Similar Messages
-
I was told to update iTunes. I did and it failed. Then every time I tried to open iTunes I get the following message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." Then I get the following: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126)." I have uninstalled and installed iTunes a couple of times with no luck. I cannot even access iTunes support
Troubleshooting issues with iTunes for Windows updates - MSVCR80
-
The first error message is: itunes.exe-System Error: the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix the problem.
The second error message says: itunes: itunes was not installed correctly. Please reinstall itunes Error 7 (Windows error 126)
I have reinstalled several times and the same thing keeps happening. Does anyone know what to do?Ralph, both links you've posted point to the same place!
Ah, I see the second one is meant to lead to Tony's tip: https://discussions.apple.com/docs/DOC-6571
That one applies for certain launch errors that can occur when iTunes has otherwise installed successfully. I've addressed the same issue in the first box of my tip.
What would be interesting to know is if Aswim does indeed have QTMovieWin.dll in their Program Files\iTunes folder, and if removing it allows iTunes to launch? It would seem that different error messages may be thrown up by different versions of the file on different versions of the OS. Perhaps many more people have been doing a complete rebuild than needed to.
tt2 -
all of a sudden I'm getting a 'itunes.exe - system error It says the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. I have tried to reinstall and still can't open itunes. help!
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
HT1923 The program can't start because MSVCR80.dll is missing.
Is there a fix for this message which suddenly appeared after I installed the latest update to Itunes? The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. Then I get Itunes was not installed correctly. Please reinstall Itunes. Error 7 (windows error 126). I've removed itunes, rebooted, reinstalled many times through the control panal as well as making sure all files removed in my computer. I've also downloaded Microsoft net framework 4 per instructions and rebooted to no avail. Any other suggestions?
Read the user tip: https://discussions.apple.com/docs/DOC-6562 for the most thorough explanation of fixing this problem.
-
All of a sudden my iTunes stopped working, and I get the following error messages:
1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
and
2. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).
Now I've checked the forums and followed the advice of uninstalling all Apple applications, rebooting, and reinstalling iTunes.
This is not working. I've tried installing as Administrator but doesn't make any difference at all.
There must be a way to fix this? I'm not a tech geek but I want to avoid having to take my laptop back to factory settings to sort this out.
ThanksClick here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99192) -
I am having trouble reinstalling my Itunes on my desktop which uses Windows 7 and I can download it but once it's complete i keep getting this error message...The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. Please help me.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
After downloading the new Itunes update, my compter now shows error: "The program can't start because MSVCR80.dll is missing from your computer". I follwed the Apple fix / steps but it did not correct it. Also, after the update my disk drive is not recognized on my computer. If I load a CD, I cannot even access it.
See also Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes (similar to the advice above) and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies. E.g. TS2308: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
The program can't start because MSVCR80.dll is missing from your computer
Hello.
My itunes was working fine when I opened it up today but after I updated it later it wouldn't open saying, "The program can't start because MSVCR80.dll is missing from your computer". So I downloaded itunes again and said that the download was not installed correctly. Then, I tried to download it manually and the same thing happned. If you could help me figure this out, it would be much appreciated.
Thank you.Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Hi, I hope some one can help as I updated my version of iTunes and now get the error "The program can't start because MSVCR80.dll is missing from your computer". I understand that I need to delete and reinstall iTunes but all of my music has been uploaded from CD's and I'd like to know if these are safe if I delete iTunes of if they too will be deleted. I have over 1300 songs so this is a big question for me. Many thanks.
Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters of any sort.)
First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Despite trying to unistall and reinstall iTunes, I continue to get the message "the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem."
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99385) -
I am unable to install iTunes. I'm receiving an error message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've unistalled and attempted to reinstall several times. I keep getting the error message to reinstall to fix the problem.
See if this post from turingtest2 fixes it : https://discussions.apple.com/message/24620553#24620553
-
I ran an iTunes update. It failed with the message "System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem." I tried reinstalling but get the same message. I looked in my Recycle Bin for that file name but there is none there. Is this a new file that iTunes wants?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683) -
I have followed the Apple Support instructions but these 2 errors always appear: "The program can't start because MSVCR80.dll is missing from your computer" and 'Error 7' but still not able to run iTunes. Anyone have a suggestion?
Try completely removing and reinstalling iTunes and all related components; you may need to do this multiple times. It won't normally affect the iTunes library, but that should be backed up anyway.
(99331) -
What does this mean: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem"? I tried reinstalling, but I get an error message saying something about permission to launch services.
Solving MSVCR80 issue and Windows iTunes install issues.
-
My itunes won't open - it says: 'The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem' I have tried un-installing then re-installing itunes and I still get the same message?? Can anyone help?
I have the exact same problem.
I have uninstalled the program, rebooted and downloaded the update again. Same problem, same message.
Please, where is that missing MSVCR80.dll? I don't remember misplacing it.
I'm a Windows 7 user.
Maybe you are looking for
-
Premiere CS6 Still Has a Long Way To Go
I'm in commercial editing and work as offline editor, assistant editor and compositor. I've been using Premiere Pro ever since FCPX came out, but not in the workplace as an offline tool because of certain major missing features: - a good EDL exporte
-
Airport Express Wireless Printing from Windows 8
I'm in the process of configuring a new laptop that came with Windows 8. I want to be able to print wirelessly to an HP PSC 1315 printer connected to an Airport Express, which I had been doing successflly from an XP Pro machine that just died. I am
-
How to do addition of two columns cells in Matrix.
Hi All, I tried following code on LostFocus event of Mtrix. I want to do addition of two columns cells of matrix and addtion display in third column. I tried the following code but in this I am getting the column value and when i enterd any value in
-
Dear Experts, I paid a vendor invoice thru F110. When I look at the vendor invoice document thru FB03 clearing document field has been updated with clearing document. But when I go to FBL1N this document still showing as open. So I went to F-44 to se
-
How to use my non-iCloud email with iCloud calendar events
Is there a way to use my regular email address (non iCloud) to receive iCloud invites? My contacts don't know my iCloud account, they only know my regular email address so they will send messages, calendar invites, etc to my regular email which is no