"The project has changed - do you want to save changes?"

This is more or less a meaningless warning in Adobe Captivate 5. if I OPEN a project and close it immediately I get this warning: the project has changed. But that is not correct, I didn't touch a single slide, I simply open the file and look at it, then click on the Close button.
If I save the project, then chose Export Captions, I get this warning as well. How can exporting captions count as a change to the project?

Hello,
It is just my intuition: thinking that the cache is updated whenever you open the project, so perhaps this is the reason?
Lilybiri

Similar Messages

You must specify the a of filter if you want to save you filter- dependent

I get this message when I try to save an implementation for BADI : NOTIF_EVENT_SAVE
Specify filter types
Message no. ENHANCEMENT213
Diagnosis
You must specify the a of filter if you want to save you filter- dependent BAdI implementation.
System Response
Without a filter type, the implementation cannot be saved.
Procedure
Enter a filter type.
The filter type already exists. This is a standard SAP BADI.
There are related notes but not for my ECC 6.0 release.
I am using: SAP_BASIS 700 SAPKB70013
Has anyone had this problem?

I think u have already had ur Document Types.
Now using Tcode Se18 u will goto BADI. There U will Select Implementation --> Change / Display.
Now at below u will see Filter Dependent Check Box Checked which means that the BADI requires a filter.
Below that u can enter Ur document Types as filters for which types only u want the BADI to be processed. If u want all the Types to be entered and as the BADI is Filter Dependent , u have to enter all the Document types. Now the BADI is triggered only for the Documents containgin that Document type u entered in the filter only.
awrd points if useful
Bhupal

When I have two browser windows open, the first with multiple tabs the second a window opened from a link (so just one tab), and close the second window, I receive the Quit Firefox prompt, "do you want to save tabs...?"

This was happening with FF 3 before upgrading to 4, and was not happening with FF4.0 until the 4.0.1 update was applied, the first time it ran. Same issue on another computer running FF3, so may be a extension related problem.
If I have three windows open and close the third, I do Not get this. Only when two are opened and one is closed. I could have three, close one, then the second and get the prompt.
Not disabled extensions
Adblock Plus
BugMeNot
Cooliris
Download Statusbar
DownloadHelper
DowntThemAll!
FireGestures
HTML5 Extension for Windows Media Player
HTTPS-Everywhere
Java Console
PDF Download
Session Manager
TinEye Reverse Image Search
YouTube Comment Snob
Disabled

Does that 2nd window have a '''Close Window''' hyperlink on that page and you are using the X in the upper right corner of that 2nd window to close it?

Dialog Box as "Do you want to save the changes?" in Forms.

Hi,
I have 4 datablocks in my forms that corresponds View.
In the form design, I have a canvas(multiple inserting design) with two buttons that calls the other two blocks.
Am inserting the records in the following way,
In first record,
am entering the value in one block, then a button-press event and so it opens another canvas where I enter some values then return to my main canvas. This is one row.
But while I try to insert in the second row, there arises the dialog box as "Do you want to save the changes"?
I should not get that dialog box.
Please suggest me with the solution.
Regards,
Mini

Thanks for the response,
Let me clearly explain.
I have 3 blocks created from view not table.
I have a canvas in the multiple display layout i.e Number of items displayed is 10.
In that canvas, I have set the two buttons. the button event is calling another canvas.
Am inserting a record in the first row in the following sequence.
Inserting the values for some fields in the main canvas, then entering the button, it opens another canvas that responds to another block, there am entering some values and closing the button event canvas, then returning to my main canvas, then entering the remaining fields with the values, thus my first row ends.
Now I want to enter the values in the second row, while I navigate from the first Row to the Second row, there arises the dialog box as to save the changes or not?
I should not get the dialog box.
Am inserting the values in the database using Insert statements in all the blocks.
Hope U understand the issue.
Suggest me with the solution.
Regards,
Mini.

Catching: Do you want to save changes? yes,no,cancel

I would like to capture the update event after "yes" is clicked on the pop up message: "Do you want to save changes? yes no cancel" The form id on this object is zero, and I'm having trouble differentiating between this and similar inventory warnings that pop up as the form id is also zero.

Hi Jw,
I would assume that this is when you are using some of the standard business one forms because if it was a request via code you would have full control over it.
What I like to do is use a before_action and action_sucsess. If the user clicks on cancel, the action_sucsess = False, thus you know your code will only execute when you click ok, unless there were any other errors within SBO, (EG Item not on hand in case of a stock transfer or something) - In which event, you probably dont want your code to excute anyway
I attach some code below
Shared Sub ClickEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef bubbleevent As Boolean)
        Dim errfree As Boolean
        errfree = True
        Dim Errmsg As String
        Try
            If pVal.ItemUID = "1" Then
                If pVal.Before_Action = True Then
                    BeforeAction(FormUID, pVal, bubbleevent)
                End If
                If pVal.ActionSuccess = True Then
                    ' Ok so its an After Action
                    If pVal.ActionSuccess = True Then
                        AfterAction(FormUID, pVal, bubbleevent)
                    End If
                End If
            End If
        Catch ex As Exception
            errfree = False
            Errmsg = ex.Message
        Finally
Thanks

When closing the Form "Do you want to save changes" window

Hi
I have a Master-Detail form where in my POST-QUERY trigger i am changing the LOV non-database item field to some value. When I just select Master record(NOT in query mode) my detail records pop up in the detail block. This is done by EXECUTE_QUERY in WHEN-NEW-BLOCK-INSTANCE trigger in Detail Block. But when i close the form it asks me to save changes even though i haven't changed anything. I have this statement in POST-QUERY Trigger
SET_RECORD_PROPERTY(:SYSTEM.TRIGGER_RECORD,:SYSTEM.TRIGGER_BLOCK,STATUS,QUERY_STATUS); This issue does not happen in QUERY-MODE.
I tried both Set_Item_Property('BLOCK.CODE',ITEM_IS_VALID,PROPERTY_TRUE); this property in the POST_QUERY and Set_Item_Property('item_name',VALIDATE_FROM_LIST,PROPERTY_TRUE); in QUERY-MASTER-DETAILS trigger but it didn't work.
please help
thanks

Hi!
I think, beause the message "Do you want to save the changes ..." has no error number,
you will not get to catch it on a form level on-message-trigger.
Better find out, why the record status changed.
- Look to a post-query trigger that fills or changes a database item
- change the Validate From List item Property to No
- check for a when-validate-item or post-change trigger on items with a lov that has the Validate From List item Property set to Yes
Regards

Forms6i question - Do you want to save the changes you have made !!

Hi,
I'm developing a custom master-detail form for 11i e-Business Suite. The requirement is to programmatically default values for some of the base table items when entering the master record.. Both the master and the detail blocks are base table blocks and defined the relation between these 2 as well..
So i have coded my defaulting logic in the "when-new-record-instance " trigger only when the "(:system.record_status IN ('NEW','INSERT' ) AND :system.mode <> 'ENTER-QUERY')"..
This is working but the problem is even when i do not change any values in the master block and i try to exit out of the form, getting a message "Do you want to save the changes you have made ".. I want to get that message only when some thing else is changed/entered in the master block or when any new detail records has been entered for that master block.
Thanks in advance
Shree

Shree,
It sounds like you have a Post-Query (PQ) trigger that is populating items in your Form. This is the typical reason why you would see this message when you close your form and no User changes have been made. The best solution would be to move your non-base table items from your data blocks to a control block so the PQ trigger won't mark the block or record as "Changed".
Hope this helps.
Craig...

Gettins "Do you want to save the changes you have made" promt without any

Hi all,
Problem : I have a master detail relation between two blocks which are on different window ( say block 1 on window 1 is master and block 2 on window 2 is detail) ,
when i open my window 2 and close it without any changes, then when i try to do any change in window 1 i get this popup message "Do you want to save the changes you have made".
I have various non database items as well which are used to hold intemediate values like sum of a column and all.
for the close button on window 2 logic :
go_block('BLOCK1');
hide_window('WINNDOW1');
I dont want to change the message level. as if there are really changes made then we need this message.
In another thread i saw this might be due to copy "value from property" created by master detail relation on the joined columns.
Please suggest any solutions.
Thanks in advance.

HI I found the solution to this Problem:
when we queried the data block then few items values were assigned . this changes the block_status to CHANGED as well as the form_status variable to CHANGED.
so in EXIT logic of that window i cleared each block explicitly . this discards all the changes made to those blocks ( This logic was implemented for CANCEL button on my screen as so we need not save the data) while the SAVE logic already has the COMMIT so will not set the popup for that.
Not a beautiful logic...... but works ...... :)

How to remove the warning "do you want to save changes to investigation.pdf before closing"

Issue: To remove the warning "do you want to save changes to investigation.pdf before closing"
I have created a XFA pdf file(using LC Designer 8.2) to display this issue
I am not able to attached the PDF. Without attaching the pdf it would be difficult to explain.
click event js:
function activateUser() {
var PDFVersion=xfa.host.variation+xfa.host.version;
xfa.host.messageBox("button click event registered");
xfa.form.form1.sendForm.welcomeMsg.presence = "invisible";
xfa.form.form1.sendForm.successMsg.presence = "visible";
event.target.dirty=false;
docReady event js:
function displayInfo(){
var res =xfa.host.variation;//Added this line to display the successMsg
//xfa.host.messageBox("docReady event registered");
xfa.form.form1.sendForm.welcomeMsg.presence = "visible";
xfa.form.form1.sendForm.successMsg.presence = "invisible";
docClose event js:
xfa.host.messageBox("docClose event registered");
event.target.dirty=false;
Steps to get the warning:
1) Open the attached pdf using Acrobat Professional.
2) Click the Confirm Enrollment" button
3) Now close the document & the acrobat gives a warning "do you want to save changes to investigation.pdf before closing"
Summary of the XFA pdf:
It has two text fileds. On docReady event field A is made visisble & field B is made invisible.
On button click event the field A is made invisisble & field B is made visible.
On closing the pdf it should not throw this warning message.
My Efforts:
1) Found a property in adobe js docs.
       event.target.dirty=false;
It doesn't solve the problem.
2) I tried to put this logic in almost all the events listed in designer but I am not able to resolve the issue.
Please help me resolve this issue.

I tried putting the below 2 lines of code at the end of button click event & docClose event.
      event.target.dirty=false;
      event.target.requiresFullSave=false;
It still gives the warning.
Also I tried to found out the line of code which is making the pdf dirty.
xfa.host.messageBox("is doc dirty (before displayInfo's visible-invisible work): " + event.target.dirty);
xfa.form.form1.sendForm.welcomeMsg.presence = "visible";
xfa.form.form1.sendForm.successMsg.presence = "invisible";
xfa.host.messageBox("is doc dirty (after displayInfo's visible-invisible work): " + event.target.dirty);
The doc got dirty when the successMsg field is made invisible.
Problem I am trying to solve is:
     To display a welcome message before user action and after user action wants to display a success message.
     I follwed the visible & invisible approach & it wokred but gives me a warning on doc close.(Highly imp to avoid it)
Is there any other approach I could follow here.

Just uploaded iso7 , . . .hate it! Can you change background colours? How do you add a new item/activity to the schedule? In notes the font has changed, can I change it back and the link colour is now yellow instead of blue, can I change it? Thanks

Just uploaded iso7 , . . .hate it! Can you change background colours? How do you add a new item/activity to the schedule? In notes the font has changed, can I change it back and the link colour is now yellow instead of blue, can I change it? Yellow on white is harder to read. Thanks

Another question. How do you bookmark something. It was so easy before, why did they change it? Can I uninstall it?

How do you change the I'd on the log in screen when you want to update your apps and the I'd is wrong

How do you change the I'd on the log in screen when you want to update your apps and the I'd is wrong and the password is also wrong. HELP

Go to Settings>Store>Apple ID. Tap on the ID and sign out. Then tap on "sign in" and sign in with the correct account.

How to avoid the message "Do you want to save the changes you have made?"

i have 3 forms
master block
detail1 block of master
detail2 block of detail1
when i go out of detail1 and detail2 blocks after doing some modifications it asks me "Do you want to save the changes you have made"?
i want to avoid this message as well as my changes should be posted in the database. what is the solution for this big pblm?

hi
may be you are trying to modify the database item or reassigning the database item value which is not actually needed.
try to comment the reassigning database values
and give clear_form(do_commit);
most probably u will not get the message again
Regards
Rajdeep .A

The disk copy of "File_Name" was changed since you last opened or saved it. Do you want to save anyway?

When saving a Photoshop CS6 file I am suddenly getting this message: "The disk copy of “File Name” was changed since you last opened or saved it. Do you want to save anyway?" I am not connected to a network and I had not downloaded any new software when it started. How do I fix this? and will this cause any file corruption? -Thanks

Chris, thanks. Yes, I realize that something outside of Photoshop is modifying the file but how do I find out what is causing it or how do I stop it? I had not added any new software or upgraded anything when this started and I have never had this problem before. I don't use any font managers. I do have a virus barrier but, as I've said, I have had this software for awhile and can't imagine why all of a sudden it would be interfering with my file. I spoke with Apple to see if the problem might be on their side but they seem to think my Mac is running fine. My biggest concern is will this cause my file to become corrupt? Before closing out yesterday, I created a new document and copied everything from this file over into the new document and renamed it in the hopes that it may help... Maybe something was wrong with that original document. Not sure that will work but will find out today. Also, I haven't worked on any other files since this started. So, I'm not sure yet if this is happening to this file only or if it may happen to future files. -Thanks

How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.

How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.
This is very annoying and we need this stopped as we have made no changes to any of the adobe files. Please advise how to do this.
Customer Service DCC

I first tried the version without the deflated stream (so everything uncompressed) against the online repair tool to check/analyse it @ https://www.pdf-tools.com/osa/repair.aspx
And it says no error found, but the reader still want to save it when closing so i still had no clue at this point.
Fortunately, i finally found what was wrong with my generated PDF.
In my xref table, each object reference was not end by a full EOL, i only did put a newline char.
Now i have "carriage return" "newline" which is the full EOL and the reader is happy and close the file silently.
As suspected i did not follow correctly the specs on xref table
Now i'll go and figure what i did wrong with the deflate filter
Thanks for your help.

Is it possible to hide/show the "Do you want to save changes you have made?" msg

Hi,
Is it possible to hide and show the Oracle message "Do you want to save changes you have made?"
Thank You

Not really.
You have to use commit_form to commit the changes or a
rollback_form to rollback just before exit_form, clear_form,
or clear_block.
Or, use clear_form(no_validate), clear_block(no_validate).
It might be good to check wether there is some change in the
data and show an alert in your own language asking the user in
his/her own language wether he/she wants to commit the changes
or not.

"The project has changed - do you want to save changes?"

Similar Messages

Maybe you are looking for