The proverbial "can of worms"
Well thanks to all I have solved my remote linking from an external html, to specific swf frame problem. But now, as usual another problem has reared its ugly head.
I have a button(s) with a spotlight animation effect in the "over state". It works fine on the "home" page, smooth and clean, but when you link to a frame in the timeline, once in that frame the spotlight effect stills shows up when mouseover, but becomes erratic and very jittery.
http://plowonstore.com/flash
Once there, if you click on about, events, or news, and load any of those pages/frames, you should see the spotlight flicker on mouseover on all buttons
Any clues as to why?
I don't know. I was thinking maybe the hit areas overlapped, but changed them so I think they don't. Maybe the original image size being bigger than the size I forced? Drop shadow or image overlap... but no I think that least likely. I also thought maybe the alpha on the light effect could be masking an area where the alpha is higher, but again the hand cursor reactes in the right places, so it doesn't seem like a focus issue.
? Lost.
BTW the edited fla you helped me with (and very grateful for)... what vers of Flash are you using? When I got it back and opened it each individual frame is, well grey with black dot individual frames now, functions perfectly, but how do I manipulate tweens? The tweened frames were solid blue with just a couple tween points, now being what appear to have the extrapolations on individual frames, so do I have to edit each individual frame?
Similar Messages
-
Is Leopard a can of worms? If I had known what it would not do, I would never have upgraded.
For example, I cannot open any photographs in Photoshop anymore because I have Photoshop 7, and Leopard will not open it. Upgrade Photoshop? Why would I have to do that when Photoshop 7 does everything I want?
I spent hours putting my music into the i-tunes library and then dividing the music into Playlists. I have hundreds of classical and modern music in i-tunes. After Leopard, all of the Playlists I made do not have any of the music or tunes I put into them. They are empty. When I first tried to open i-tunes I received the message “the i-tunes library cannot be read because it was created by a newer version of i-tunes.” How is that possible? I tried several times with the same result. Then I went to a separate hard disk that I had with the music saved and opened i-tunes. I was then able to access the library but still all of the Playlists I had made are empty.
I have 3,000 plus family names in a genealogy file with charts and information about each family. None of this can be opened because Leopard says “Cannot open because Classic
Environment no longer supported.” Some comment was made in this forum that you should be upgrading so Classic is not longer needed. These files were prepared years ago with programs that no longer exist so upgrading is impossible.
Why does everyone continue to say always backup so it will not be lost. What they overlook is that backup is no good if you cant open the backup. All of the backups I have on CDs and two separate hard disks for my genealogy files are useless because they cannot be opened with Leopard.
I have always had a very high regard for Apple. I started with Apple computers when they first started making them and switched to a PC only because there were some programs I needed that Apple did not support. A little over a year ago I went back to Apple and bought a 20” IMac with Panther. Within 30 days Apple came out with Tiger, but there was no recourse for those who had bought the Panther version even though there was no warning that Panther would be obsolete within 30 days.
Am I missing something here? Are the additions that Leopard provides worth the loss of the files I use and need?
Is there any solution to these problems? Or do I have to go back and try to reinstall Panther? Any suggestions will be greatly appreciated.Welcome to Apple Discussions. Please take what follows as being offered in a good, but realistic spirit....
- Adobe posted information about its applications' compatibility before Leopard was released. Photoshop 7 is about five years old. There have been three major upgrades to Photoshop since 2002. It's reasonable to expect that Photoshop 7 would not continue to work indefinitely. You are fortunate, however, that the ~$199 upgrade to CS3 is available to users of Photoshop 7.
- iTunes 7.4.2 was available for Tiger, as well, so chances are that your issue is unrelated to Leopard. Hopefully, the iTunes Library and iTunes Music Library.xml files from your Tiger installation are backed up. You should post about this in the appropriate iTunes forum.
- The genealogy software issue is unfortunate, but it hasn't exactly been a secret that Classic support would be lost in 10.5. In any event, compatibility with third-party software should be sorted out before upgrading an OS, not after.
A little over a year ago I went back to Apple and bought a 20” IMac with Panther.
Tiger has been out for well over two years. Like Leopard, there was no surprise about when it was going to be released.
Am I missing something here? Are the additions that Leopard provides worth the loss of the files I use and need?
Honestly, these are questions that need to be asked before upgrading an OS, not after.
Is there any solution to these problems? Or do I have to go back and try to reinstall Panther? Any suggestions will be greatly appreciated.
Go out and buy yourself an external hard drive for $100-200 and reinstall Panther for situations in which Leopard doesn't work for you.
Good luck! -
I know I'm opening up a can of worms with the question I am about to ask. This was prompted by an article in today's newspaper. It has been suggested that the use of cell phones, both talking and texting, be federally banned. Opinions, please. Personally, I think texting should be banned, talking from personal experience with my run in with a texter while driving. But talking, especially if you have a handless device, I don't know. So many things can be distracting while driving, why only talking on cell phones?
mortb wrote:
I know I'm opening up a can of worms with the question I am about to ask. This was prompted by an article in today's newspaper. It has been suggested that the use of cell phones, both talking and texting, be federally banned. Opinions, please. Personally, I think texting should be banned, talking from personal experience with my run in with a texter while driving. But talking, especially if you have a handless device, I don't know. So many things can be distracting while driving, why only talking on cell phones?
Well mortb this question can have many spins an turns on it. Do we take it away or leave it alone!
But one thing we all should know when we are at the wheel were in charge of the biggest an deadliest wepon there is. And 100% of our focus should be the Road an unfortunatly this is'nt always the case. An some how it needs to be Balanced for the safety of everyone.
But this is not going to be a easy thing to fix as every one lives with there phones it's a part of life an for the ladies out there being on a cellphone is no different than tending to the Kids , puttin on Make up, or fixing there hair. For the guys its slightly different but still in a way it's the same.
But if Uncle Sam has his way an most of the time he does cellphones use in newer vehicle's especially "Semi Trucks" as we know it may become a thing in the past. or may be Limited for use only when the vehicle is in a parked position. An for older cars that's on the road they could totaly ban cellphone use in them unless a device can be installed in them to do as the same as what would be in a newer vehicle's setup.
This what i wrote to some might be hogwash but the accidents that could have been prevented from talking or Texting or ones in the future! way heavy on should there be a ban. it's your choice to decide but think about the next time you strap your self an your Children in your vehicle an your driving down the road an you get a phone call do ya wanna answer it while driving or do i want to wait till i can safelly pull over. Then Take the Call...
Happy Holidays to all an Happy new year.! B33 -
Trying to delete file from trash but get this: The operation can’t be completed because the item “File name” is in use. All other files delete except this one. Please help
Maybe some help here:
http://osxdaily.com/2012/07/19/force-empty-trash-in-mac-os-x-when-file-is-locked -or-in-use// -
I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?
In iTunes prefs>Store - is the Store check box unchecked?
Did you repair pemissions with Disk Utility?
MJ -
New ipod touch, Error: "The device can not be read or written to."
I don't know what else to do!
I also have an Ipod touch that just doesn't sync. When I connect the Ipod and launch Itunes to sync, it tells me that the device can not be written to:
It just doesn't snyc at all. It's brand-new, out of the box and just doesn't work. And it's not my first ipod, so I know how to handle Itunes.
That's what i've tried so far without success to solve the problem:
* restored the touch hundreds of times, both in recovery and DFU mode and within the touch software
* upgraded to firmware 1.1.4, downgraded back to 1.1.3, then to 1.1.2. and back to 1.1.4 - no change!
* installed several different ITunes Versions and different Apple Mobile Device Services
* tried MediaMonkey BETA with Ipod Touch support (this just creates 0kb files on the touch, but it also uses the mobile device service, so i guess the failure is somewhere there)
* tried 4 different Windows XP systems with Itunes at my home and at friends (same error there as well)
* restored my Windows XP with a recovery version and reinstalled Itunes completely from scratch
* created a new user account in Windows XP and tried it with this one
* launched Itunes with Internet switched off
* used different USB ports - both 1.1 and 2.0
* disconnected all USB devices
* registered the necessary DLLs manually
* last week, I sent the ipod to Apple (they claim that everything is fine and the problem is just me and my computer and sent it back without change)
I don't have an apple in reach, so i'm not able to test it with an apple computer. There is also no apple store here in the country side of Germany.
What else can be done? I know there are hundreds, that have the same problem but I don't know any more things to try. Now i have a 300 bucks touch i can not use as mp3 player...
Message was edited by: basti007As I said, i did that! Quote:
+* last week, I sent the ipod to Apple (they claim that everything is fine and the problem is just me and my computer and sent it back without change)+
Today I got it back and nothing changed. I tried to call Apple Germany, but after i waited over 1,5 hours on the waiting line, i gave up. -
Photoshop CC 2014 - The file can not be saved in path because an error has occurred
Hello,
I need again help regarding this issue. Sometimes but very often I receive an error, trying to save a PSD file, the error is: "The file can not be saved in <path> because an error has occurred". After that it is not possible to save the file in any format, using save or save in dialog. The only way to rescue the result is, to save for web as an jpeg. This error occours often using Topaz or NIK filter and until now only in PS-CC 2014. My workflow looks like this:
- Open NEF RAW file in Brdige
- Settings in ACR and give it into PS by clicking OK in ACR
- In PS doing a adjust some levels
- press SHIFT+STRG+ALT+E for a new summary layer
- Uing Topaz Adjust on the new level with 65% opacity
- press SHIFT+STRG+ALT+E for a new summary layer
- Using Topaz DeNoise on the new layer
- pres STRG+i and resize the image to 1200x797
- Using Topaz InFocus on the same layer as DeNoise
- create a vignette with brightness adjustlayer
After this workflow in nearly 90% it is not possible to save the file as PSD or something else, only to save for web as JPG. If I save the file after opening the RAW in PS and after every layer with Topaz Filter, I can save the file when I am done. Same issue occurs using NIK Filters in that way.
I tried to optimize the performance by using this guide: http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html doesn’t solve the issue.
I re- and installed all Adobe Products more than three times, doesn't solve the issu.
After that I ordered a new SSD drive and insall Windows 7 64bit inkl. All latest hotfixes, patches and drivers. I downloaded the newest Adobe Versions and the newest filter sets from Topaz and NIK. Doesn’t solve the issue.
This is my rig:
Gigabyte Z87X-UD4H mainboard
Intel Core i7 4770k
32GB Corsair RAM
250GB Samsung 840 Evo SSD Drive
nVidia Geforce GTX770
During my tests I took the same RAW File and created nearly 20 adjustment layers and summary layers, without using Topaz or NIK filters. No problem, I was able to save the file as PSD file.
From my point of view, actually, the error occurs only when I am using Topaz or NIK filters. Both supports doesn’t know the issue and if I search the web, I can’t find more then me. It seemed to depend on my settings, my rig or something else, perhaps a cache is overflowed or something like this. Adobe telephone support can’t help because I said I use a third party filter. But it occurs with two different manufactures…
So please guys, help me to figure out why this error occurs in my system.
Thanks in Advance and best regards,
MichaelUpdate: I tried several times to reproduce the error, actually it dosen't occur. I changed nothing on my system, without reboot it twice. This is what I said in my beginning times: it occurs sometimes but often. I will keep you up to date.
-
Hi
I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
Anyone who can help? Thanks..
Br. BoGet a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
Or try the methods apple recommends..
OS X Yosemite: Set permissions for items on your Mac
It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive. -
When sending email PO in a PDF attachment, the attachment can not be openen
Hi all,
We are trying to send an email with the PO in PDF format. We got the email but the attachment can not be opened.
Error reads: Adobe could not open test.pdf because it is either not a supported file type or because the file has been damaged (for example , it was send as a email attachemnet and was not correctly decoded).
Could any body bring some light? We know that everything in SCOT is fine because we can email the PO through configuration to the vendor without problem. It is just these extra copies that do not work.
a) We are modifying our custom Print program to add the code below after closing the form.
in few words:
a) We are getting the OTF from closing the form.
b) Converting the OTF to PDF
c) Sending the PDF as attachment.
data: lt_docs TYPE TABLE OF docs.
data: pdf_bytecount TYPE i.
data: begin of pdfout occurs 0,
tline type tline,
end of pdfout.
Ende Formulardruck --------------------------------------------------*
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
result = result
tables
otfdata = otf.
IF RESULT-TDSPOOLID NE SPACE.
SPOOLID = RESULT-TDSPOOLID.
PERFORM PROTOCOL_UPDATE USING '320' SPOOLID SPACE SPACE SPACE.
ENDIF.
if result-userexit eq 'C' or
result-userexit eq 'E'.
retco = '9'.
endif.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
IMPORTING
bin_filesize = pdf_bytecount
TABLES
otf = otf
doctab_archive = lt_docs
lines = pdfout
EXCEPTIONS
err_conv_not_possible = 1
err_otf_mc_noendmarker = 2
OTHERS = 3.
Creation of the document to be sent File Name
maildata-obj_name = 'TEST'.
Mail Subject
maildata-obj_descr = 'Subject'.
Mail Contents
append mailtxt.
describe table mailtxt lines tab_lines.
read table mailtxt index tab_lines.
maildata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( mailtxt ).
Creation of the entry for the compressed document
clear mailpack-transf_bin.
mailpack-head_start = 1.
mailpack-head_num = 0.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'RAW'.
append mailpack.
Move OTF code to structure SOLI form email
CLEAR solisti1. REFRESH solisti1.
LOOP AT otf.
solisti1-line = otf.
APPEND solisti1.
ENDLOOP.
Move pdf code to structure soli form email
clear solisti1. refresh solisti1.
loop at pdfout.
solisti1-line = pdfout.
append solisti1.
endloop.
loop at solisti1.
move-corresponding solisti1 to mailbin.
append mailbin.
endloop.
describe table mailbin lines tab_lines.
mailhead = 'TEST.OTF'.
mailhead = 'TEST.PDF'.
append mailhead.
Creation of the entry for the compressed attachment
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'OTF'.
mailpack-doc_type = 'PDF'.
mailpack-obj_name = 'TEST'.
mailpack-obj_descr = 'Subject'.
mailpack-doc_size = tab_lines * 255.
append mailpack.
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
append mailrec.
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
append mailrec.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = maildata
TABLES
PACKING_LIST = mailpack
OBJECT_HEADER = mailhead
CONTENTS_TXT = mailtxt
RECEIVERS = mailrec
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
ENDFORM.Dear Monica,
You need to configure the system with respect to functional point of view and need to write the following code in print program. i have done this and solution is as follows.
<b> Reward me for this solution.</b>
Process 11 (MM) Sending RFQs and POs to vendors directly from the system instead of sending thru Courier or Fax
Existing Process (AS-IS) Presently system is not supporting this requirement
Business Requirements RFQs to be linked with vendor master with e-mail to send enquiries directly through system instead of courier/fax. Vice versa P.Os. Specifications, drawings should also go to vendor along with mail.
To-Be
Configuration Settings:
1) Spro Materials management Purchasing Messages Output control Message types Define message types for RFQ/ PO
Created ZEK1,ZMI and ZEK2 for RFQs
Created ZIK,ZOC,ZOK,ZOM,ZSI, ZSK2 and ZSM for Pos
The above New output types Included with existing Print Forms and Programs but modified with External send(5) medium, and added companys letter head thru ABAP developments (details provided below)
The above new output types also maintained for Fine- tuned control (thru same navigation) for New(1) and Change(2) operations
2) Spro Materials management Purchasing Messages Output control Message determination schemas Define message schema for RFQ/ PO
Maintained the new output types in the control data
3) Maintain Condition records for the New out put types (copied same document types from the existing old output types)
Easy access Logistics Materials management Purchasing Master data Messages MN01 (for RFQs)/ MN04 (for Pos)
4) Maintain Email id of Vendor in Vendor master.
Developments (ABAP):
1) Copied the existing print programs and forms of the corresponding out types.
2) Addition of header window in each corresponding form (HEADER window). Uploaded the HEADER3 graphics in the header window.
INCLUDE HEADER3 OBJECT GRAPHICS ID BCOL LANGUAGE EN
3) Added the the following code in TOP includes
TYPE-POOLs szadr.
INCLUDE: LMEDRUCKF09.
data: intnast LIKE snast,
lvs_recipient LIKE swotobjid, "Internet
lvs_sender LIKE swotobjid, "Internet
lvs_comm_type TYPE ad_comm,
lvs_comm_values TYPE szadr_comm_values,
p_retco TYPE i.
5) Addition of the perform to SOS include for header window display
PERFORM WRITE_FORM_HEADER.
*& Form WRITE_FORM_HEADER
text
--> p1 text
<-- p2 text
FORM WRITE_FORM_HEADER.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'HE1'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'HEADER'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
ENDFORM.
6) In the corresponding FORM include the following code has been added.
DATA: lvs_comm_type TYPE ad_comm,
lvs_comm_values TYPE szadr_comm_values,
xprogramm type sy-repid.
... use stratagy to get communication type
CALL FUNCTION 'ADDR_GET_NEXT_COMM_TYPE'
EXPORTING
strategy = nast-tcode
address_number = lfa1-adrnr
IMPORTING
comm_type = lvs_comm_type
comm_values = lvs_comm_values
EXCEPTIONS
address_not_exist = 1
person_not_exist = 2
no_comm_type_found = 3
internal_error = 4
parameter_error = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
convert communication data
MOVE-CORRESPONDING nast TO intnast.
MOVE sy-repid TO xprogramm.
7) By using the function module we can get sender and reciepient mail ids to variables lvs_recipient lvs_sender
CALL FUNCTION 'CONVERT_COMM_TYPE_DATA'
EXPORTING
pi_comm_type = lvs_comm_type
pi_comm_values = lvs_comm_values
pi_country = lfa1-land1
pi_repid = xprogramm
pi_snast = intnast
IMPORTING
pe_itcpo = itcpo
pe_device = xdevice
pe_mail_recipient = lvs_recipient
pe_mail_sender = lvs_sender
EXCEPTIONS
comm_type_not_supported = 1
recipient_creation_failed = 2
sender_creation_failed = 3
OTHERS = 4.
IF sy-subrc <> 0.
Avoids cancellation with message TD421
p_retco = '1'. "831984
PERFORM protocol_update USING '740' space space space space.
dummy message to make the message appear in the where-used list
IF 1 = 2.
MESSAGE S740(me).
ENDIF.
EXIT.
ENDIF.
IF xdevice = 'MAIL'. "885787
Check validity of email address to avoid cancellation with TD463
CALL FUNCTION 'SX_ADDRESS_TO_DEVTYPE' "831984
EXPORTING
recipient_id = lvs_recipient
sender_id = lvs_sender
EXCEPTIONS
err_invalid_route = 1
err_system = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
p_retco = '1'.
PERFORM protocol_update USING '740' space space space space.
dummy message to make the message appear in the where-used list
IF 1 = 2.
MESSAGE S740(me).
ENDIF.
EXIT.
ENDIF.
ENDIF.
8) Attaching the new print program and form in NACE transaction.
Steps for End user:
1) Creating the Purchase Order or RFQ with suitable document type through ME21N or ME41 .
2) Executing the transaction ME9F and in selecting the suitable output type.
3) Executing the transaction ZSEND_PDOC using INT as input.
4) With above steps we can able to send purchase order or RFQ to vendor as an attachment through e-mail in PDF format.
Regards
Badari -
I have been trying to save a document in illustrator and every time I try to, a dialog box pops up and says the following- Can't save the illustration. You do not have enough access privileges. id: -5000....This has been happening ever since I switched to CC and whenever I try to save something in indesign, I get a dialog box that says that my file is corrupt. How do I fix this? I cannot get any work done !!!
You should ask in Illustrator
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll -
The operation can't be completed because one or more required items can't be found. (Error code -43)
When I attempt to add files to...or copy to the desktop of my mac, my icloud (idisk ..the blue icon on my desktop) is giving this error:
The operation can’t be completed because one or more required items can’t be found.
(Error code -43)
I've been searching for info on that error code, but I'm not find anything on (many different error codes, but not -43).I get an error -36.
I did the dot_clean in the terminal.
Did not fix it. -
hi. i have the adobe elemenets6/premiere elements 4 package and my disk has gotten destroyed from getting all scratched up. my laptop i had my program on had to be wiped out and everything has to be reloaded. is there a way the program can be downloaded from the internet? i have the packaging still where it shows my serial numbers.
iPods do not work with "accounts." They work with your iTunes library. You don't have to set up a new iTunes library for each iPod. One iTunes library can sync with as many iPods, iPhones, and iPads as your own, at the same time. iTunes connects to and treats each device separately.
However, if your iPod nano is set up for automatic syncing with an iTunes library that is NOT your current iTunes library, you cannot sync your current library to it without replacing its existing content. Do you have access to the previous iTunes library, the one the iPod currently synced to? If so, you should transfer your song files from that iTunes library to your current iTunes library. Then, sync our iPod to your current iTunes library. You can post back to get more info about the procedure.
If you don't have access to that previous iTunes library, the approach is to first offload the song files from the iPod to your computer's drive, then add the song files to your current iTunes library.
You cannot use iTunes to transfer song files from iPod to computer, except for songs purchased from the iTunes Store. However, there are third-party methods and utilities that can transfer from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
You can then sync your iPod to your "consolidated" iTunes library. -
Started a Itunes software update this morning which didn't work. Now Itunes will not open at all. I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."
There are a couple of options that I know of to fix the issue.
One is listed in this thread - https://discussions.apple.com/message/24606478#24606478 - and involves uninstalling iTunes and related components and then re-installing iTunes. You will need to read the instructions in the thread to see the correct uninstall order.
Second option is use System Restore to set your system back to a date prior to the iTunes update. I did this before finding the thread mentioned above.
Not sure exactly what the problem is but I know, after a search, that MSVCR80.dll was indeed already installed on my computer.
Message was edited by: karivers -
i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
Please HELP!!!!!! Getting second thoughts on Lion!!!!Hi b,
Have you restarted yet? -
MSI Big Bang-XPower II More MB RAM than the CPU can handle...
I understand reading in a few forum post :" By making more memory available to the system more data can be cached in RAM, so there will be less hard drive activity, and less swapping to memory so your system will perform better." But what happen when motherboard for a desktop that supports( and had install) more RAM than the processor can handle?(aka:processor Max Memory Size).
Please comment in this configuration.as I 'm looking for a MB than offer me the more SATA6 connection i found a few available using LGA2011 socket (MSI Big Bang-XPower II LGA 2011 Intel X79 SATA 6GB/s USB 3.0 XL ATX Intel Motherboard with UEFI BIOS) than support 128GB. As I understand the processor Intel® Core™ i7-3930K Processor only work with 64GB.
Is there any advantage to have a MB that hold a bigger RAM capacity than the CPU? If so, how can this be translate using in a program like Adobe After Effects, RAM preview? thankMore Memory doe's not make it faster as its Volatile Memory (more RAM but it has to be run at much slower speeds) that is very short term and is just a buffer for active Programs and files it Caches there while its active but in no way improves system speed (as it has to be clocked slower to allow the IMC on the CPU to cope with it)! more memory just allows more Active Large programs and files open at the same time and huge amount of ram will only really be of benefit for things like Video Editing, photo editing and 3D rendering as those take alot of ram to allow all the computations that the CPU does to be held for quick access but only when they are active!
having more RAM then your CPU can Handel is a VERY BAD IDEA as it will just refuse to even post or in very rare cases damage the CPU's IMC leading to a dead CPU!
why MSI have done that is for possible later 2011 CPU's that may allow the 128GB of RAM limit to be used but currently they do not exist currently as X79 is a more professional grade Platform that will probably be around for years to come (may be used for many upgrade cycles and may eventually have a cpu that can use 128GB or ram) and who knows what will happen with Intel CPU's in that time frame! (more of a possible forward compatibility thing as its a very high end platform)
as for after effects it uses RAM for holding Render Files so in theory more ram will just allow it to render Larger files that are more complex without hitting the Available Ram ceiling that your computer has but it will not render any faster as a result it just gives it more headroom to work in!
so overall more ram = more Active space available & no increase in speed (actually maybe a drop in speed as it needs to run slower causing LAG/Latency) so it all depends what is important to you here to whether more ram is of any benefit or just a hindrance but that is down to your own use case scenario!
Maybe you are looking for
-
I want to import music from my ipod into itunes, is it possible?
My old laptop was destroyed, and I lost all of my music with exception of what's on m ipod currently. I got a new computer and installed itunes, but it's not giving me the option to import music into itunes from my ipod. I really want to be able to k
-
How to run standalone java file from weblogic server on Solaris
Hi, We have a requirement to run a java file at a scheduled time in a day using cron scheduler on our linux server. We need to fetch data from the database & perform some business logic in this standalone JAVA file. Our application has an EAR which i
-
Running Totals and Formulas with Cross Tabs
Hi, I'm using Crystal Reports 2008 and am having two issues using Cross Tabs. The first is that I want to have two crosstabs. They both will have a common Y axis (Oppourtunity.Sales Rep), and on the Y Axis I want one to show all (Opportunity.Create D
-
Hi experts Whether it is possible to copy the data of all disk in SAP server to another standby server with different hardware configuration ( without installing SAP only copying data from one server to another server retaining the IP id and hostname
-
Hi can anyone help here?I have an Audigy 2 ZS that worked fine in XP with powerdvd etc, for spdif output. In vista 64 I couldn't get any sound if i selected spdiff. I installed a codec pack and a windows update kb936225. My sound then worked fine. I