The PS4 is finally getting it's own remote control

http://ps4daily.com/2015/07/ps4-media-remote/This has been long overdue. The PS3's handset soon hit the shops.With the PS4 getting more & more apps added to it (some apps on the PS4 are rip-off Sky) According the link it hits the shops in October at $30 not sure in £.

hayzink wrote:
mrshayzink wrote:
PFC_Hudson wrote:
Nakatsu_Hime wrote:
So, 'Sony sux' even when they do release an requested item?
Jeez, people such as you are never satisfied.
He's Scottish, what do you expect?   What's your problem?  We are all haggis munching tattie-bogle's to some people julieI don't like haggis. Everyone likes spuds in some form. 

Similar Messages

  • The new ipod touch will have Siri with the A5 chip. Since the ipad 2 also has the A5, will the ipad 2 finally get Siri??

    The new ipod touch will have Siri with the A5 chip. Since the ipad 2 also has the A5, will the ipad 2 finally get Siri??

    It's probably due to the RAM and processor limitations.
    iPad: RAM - 256MB, Processor - 1 GHz Apple A4
    iPad 2: RAM - 512MB, Processor - 1GHz dual-core Apple A5
    iPad 3: RAM 1024MB, Processor - 1GHz dual-core Apple A5X
     Cheers, Tom

  • Disabling the MBP's ability to receive signals from remote control?

    I own an AppleTV, my roomate uses a Macbook and I have the Macbook Pro, and they all use the same remote control and signal. Anytime we use the remote for the AppleTV it sends our notebooks into Front Row. Is there anyway to disable the mac's ability to receive the signal from the remotes?
    Thanks.

    Hi,
    What you need to do is pair each Apple Remote so that it's only recognised by the Mac it's paired with. The following Apple KB Documents will guide you on how to achieve this:
    *Pairing and Unpairing the Apple Remote with Apple TV*
    http://docs.info.apple.com/article.html?artnum=304991
    *Pairing your Apple Remote with your computer*
    http://docs.info.apple.com/article.html?artnum=302545
    Kryten

  • How can I control the volume in a Appletv movie from my remote control App. In my IPad ?.

    How can I control the volume in a Apple Tv movie from my remote control App. In my IPad ?.

    There is not now, nor has there ever been a version of flash for any iOS device.
    Adobe has abandoned mobile flash, so there never will be.
    Browsers like iswifter or photon may work for you, but don't hold your breath.
    Check app store for an app of whatever game you want.

  • Anybody knows whether the "Save as Acrobat" in Excel can be remote-controlled?

    Acrobat and Excel have an equivalent feature, at least on Windows: The ability of an outside application, via COM, to execute internal {Acrobat, Excel} commands.
    I would like to tell Excel: "Save this spreadsheet as PDF" from my app.
    Does anyone have experience with that?
    TIA,
    -Ramon
    ps: Yes, I am going to ask this in some Excel group as well, but here everybody is programmer.

    Well, well, well.. I am pleasantly surprised:
    This problem seems to be a lot easier than I expected. There is a "Save as PDF" function. The only catch is that it is implemented in C#
       http://stackoverflow.com/questions/5499562/excel-to-pdf-c-sharp-library
       http://msdn.microsoft.com/en-us/library/office/bb238907%28v=office.12%29.aspx
    -Ramon

  • What remote controls will work with the iMac 27inch.

    Okay I hung the new iMac on the wall in my kitchen. Used the apple adapter I have a little apple remote control that works the dvd player fine. Of course the wireless keyboard and the wireless mouse work fine. I have an elgato tuner because this iMac is my dvr/tv does anyone have a remote that will work the iMac as a dvd and work the elgato hybrid tuner. Just trying to make this simple. Thanks

    iTunes itself, that is it's built-in remote speaker function, will work only with an Airport Express. There may be other wireless speakers that have their own drivers or transmitter; someone else here may be able to make a recommendation.
    Message was edited by: Dave Sawyer

  • How do I create my own favorite template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to templates, which take more memory. I have a large slideshow, and need all the space I can get

    First, how do I create my own favorite theme template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to already existing themes, which take more memory. I have a large slideshow, and need all the space I can get. I just want to use a picture as my DVD cover, and then insert a slideshow. Also, when I try to burn my 8.5gb double sided slideshow, all that burns is the music. It is a large slideshow, a memorial on the life of my now deceased brother. This means a lot to me and to my family, and I am having so much trouble trying to burn it. I have gone into Project View and selected appropriately. The bar shows I have room to burn this DVD, but it does not burn.  I have burned so many DVDs in the past, but this one just will not burn. I am so confused at this point. I will say this is the first 8.5gb I have attempted to create and burn. My specs list a 7.7gb or 4.7gb as operable....but there are no 7.7gb dvds. I had to purchase 8.5gb. Help? What am I doing wrong? I have spent so much time on this, and just cannot figure it out.

    Final Cut is a separate, higher end video editor.  The pro version of iMovie.
    Give iPhoto a look at for creating the slideshow.  It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them.  You can select from various themes and transitions between slides and add music from your iTunes library.
    When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
    Save the resulting Quicktime movie file in your Movies folder.
    Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
    Then follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version).  Personal preferences showing here.

  • In logic Pro, when I open up an audio track and load an audio file, there is no sound. I will finally get a sound out of one of the audio tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustratin

    In logic Pro, when I open up an audio track or software track and load an audio file/loop or software file loop, there is no sound. I will finally get a sound out of one of the audio or software tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustrating as this takes much time to complete work.
    os x, Mac OS X (10.6)

    I'm not sure I follow your words Fuzzynormal. You've helped by offering the insight that my issue in Logic Pro 9 is not a bug but a feature. But fell short of enlightenment by being a judge of character and of how one should interact in this forum. You insinuate that I haven't tried to solve the issue on my own when in fact I have. These forums are always my last resort. You further suggest that I am complaining. This is not a complaint. It is a genuine issue that I cannot figure out. Then you think that Brazeca is holding my hand and being a nice guy. Brazeca is helping people like me who might not be as adept at using Logic Pro as probably you are.This community forum was established to raise questions, answers and dicussion to help Apple's customers better undertand their operating systems and related issues. You are doing a disservice by not contributing positively and by trying to make this forum what you want it to be. You may have all the time in the world to try figuring out stuff but we are not all like you. We all have different schedules and different levels of understanding. And that is what this forum is for - to help people move forward. If you can't contribute positively then keep silent. And by the way, you say to "read the words that are printed down to explain to you how that works" what words are you talking about? Why don't you be of some help instead of trying to own this forum. 

  • 15" i7 Macbook Pro from early 2011.takes the mac laptop two or three tries to boot successfully. It would turn on, show gray screen, shut down, turn on again, show gray screen, shutdown, and then turn on, show gray screen, before it can finally get

    Hello All,
    I have a 15" i7 Macbook Pro from early 2011. The past few weeks, it has been getting increasingly difficult to get on my computer. It takes the mac laptop two or three tries to boot successfully. It would turn on, show gray screen, shut down, turn on again, show gray screen, shutdown, and then turn on, show gray screen, before it can finally get to the dark gray log-in screen. Even when I finally get logged in to start working, thinking it would be okay now, it shuts down randomly.
    I've ruled out the possibility of a software problem because I've just done a clean re-install of Mac OS X Mavericks on my computer just yesterday.
    I did upgrade the RAM recently, about a month and a half ago, from 4GB to 16GB, I went to the apple store four days after that upgrade to have them do a hardware test, and clean the inside of my laptop, which helped with previous heat issues. When they did the hardware test, the hardware was all registered as fine from their system.
    I've tried resetting the SMC, PRAM, and doing the internet recovery hardware test, but to no avail. I thought I could at least find out what parts needed to be replaced from the hardware test but it seems that when the hardware test is almost finished, the computer just shuts down, So I am unable to see the results.
    My computer is also having battery issues, under battery condition, it says "replace now," parts have been ordered, waiting for arrival. But if the battery health is low, it should still boot up fine, it would just hold a significantly less charge.
    Could this be a hard drive issue?
    Has anyone had similar symptoms and how was it resolved?
    Does anyone know what I can do to alleviate this issue?
    I haven't had time to take it to Apple because I'm currently taking a 21 credit semester academically. I'm an art and design student so my computer is basically the bane of my existence. Help! Any constructive advice is welcomed!
    Thank you so much for your input!
    -Christina C.

    Problem description:
    The Hard Disk is failing.
    EtreCheck version: 2.0.11 (98)
    Report generated November 4, 2014 at 7:59:28 AM EST
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2.2 GHz Intel Core i7 CPU: 4-core
      16 GB RAM Upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      8 GB DDR3 1600 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 512 MB
      Color LCD 1440 x 900
      AMD Radeon HD 6750M - VRAM: 1024 MB
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 0:3:43
    Disk Information: ℹ️
      TOSHIBA MK7559GSXF disk0 : (750.16 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      HDV4 (disk0s2) /  [Startup]: 749.30 GB (712.10 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Application Support/Avast/components/fileshield/unsigned
      [loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
      /Library/Application Support/Avast/components/proxy/unsigned
      [loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.avast.userinit.plist Support
    Launch Daemons: ℹ️
      [invalid?] com.adobe.SwitchBoard.plist Support
      [loaded] com.avast.init.plist Support
      [loaded] com.avast.uninstall.plist Support
      [loaded] com.avast.update.plist Support
      [invalid?] com.perion.searchprotectd.plist Support
    User Launch Agents: ℹ️
      [invalid?] com.avast.home.userinit.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [invalid?] com.jdibackup.ZipCloud.autostart.plist Support
    User Login Items: ℹ️
      None
    Internet Plug-ins: ℹ️
      AdobePDFViewer: Version: 10.1.1 Support
      QuickTime Plugin: Version: 7.7.3
      JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
      Default Browser: Version: 537 - SDK 10.9
    User Internet Plug-ins: ℹ️
      TroviNPAPIPlugin: Version: 1.0 - SDK 10.9 Support
      Google Earth Web Plug-in: Version: Unknown
    Safari Extensions: ℹ️
      Avast Online Security
      Trovi Search for Safari
    3rd Party Preference Panes: ℹ️
      None
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          16% mds
          7% WindowServer
          1% loginwindow
          1% fontd
          1% com.avast.daemon
    Top Processes by Memory: ℹ️
      120 MB com.avast.daemon
      86 MB Google Chrome
      52 MB Finder
      52 MB WindowServer
      41 MB Google Chrome Helper
    Virtual Memory Information: ℹ️
      13.45 GB Free RAM
      1.34 GB Active RAM
      944 MB Inactive RAM
      1.43 GB Wired RAM
      1.11 GB Page-ins
      0 B Page-outs

  • I bought a relative's original iPad. I want to leave the apps on it and add my own pdfs to read. My itunes account is really for my iPod. the computer says that if I "Sync" the iPad will be erase, and become like my iPods. how can I just get my files onto

    I am a first-time iPad owner/user. I bought a relative's original iPad. I want to leave the apps on it and add my own pdfs to read. My itunes account is really for my iPod. iTunes message says that if I "Sync" the iPad will be erase, and become like my iPods. If I make a new iTunes account, would the apps be erased when I tried to use it?
    How can I just get my files onto this iPad, and still have the apps that my relative left there for me?
    Thank you.

    iPads sync to 1 computer only.
    All media and apps are tied to the Apple ID that purchased them.
    Without your relatives ID and password, you cannot update any of the Apps.
    I am pretty certain he is also violating Apples terms of service by giving you the apps.

  • I am part of a family sharing setup.  Can I have my own payment method so the organizer does not get charged for my purchases?

    I am part of a family sharing setup.  Can I have my own payment method so the organizer does not get charged for my purchases?  If so, how do I set this up?

    Yes.  Just redeem gift cards so that your own account always has a sufficient credit balance.  Here is how it works:
    Family purchases and payments
    After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card.

  • How to get the Full and final settelment date from PC_payresults

    Hi Experts..sairam.
    We are preparing Functional specification  for a report on Full and final settelement.
    We need to extract the  full and final settelement date from  payresults.
    Full and final settelement would be an offcycle run.
    How can we identify the particular Offcycle is meant for full and final settelment.
    Full and final settelement can be done after date of relieving.
    Please share your ideas to get the field names and logic to fetch.
    Thanks in advance.
    Regards,
    Sairam.

    Hi Praveen,
    I found it from HRPY_RGDIR through SE11.
    But im in confusion in thinking on Logic to find the Full and final settelment processed date.
    First of all..Report has to check WPBP table weather Employment status is Zero.
    Later..It has to read the HRPY_RGDIR table.
    Here what the system to check.What conditions to be validated to fetch the Full and final settelment processed date.Will it be FPPER and INPER as 00000000 or shall we do it from offcycle reason.
    Please share your ideas.Thanks in advance.
    Regards,Sairam.

  • I participated in getting the free download of Mountain Lion for new Mac owners. It took me three days to finally get a code to do it and when I tried downloading it, the estimated time was 74 days 17 hours. Now an error occurred. What do I do?

    I participated in getting the free download of Mountain Lion for new Mac owners. It took me three days to finally get a code to do it and when I tried downloading it, the estimated time was 74 days 17 hours. Now an error occurred. What do I do? I am very frustrated and just want the great software to download in a resonalbe time!

    Take your Mac to a location with a fast, relaible Internet connection that will be all yours during the duration of the download.
    If you want to complain, PLEASE call Apple and do so.
    Internet only downloads of OS X is completely stupid, it assumes everyone has reliable Internet everywhere and /or no data caps.

  • What is the best way to get a copy of Final Cut 7?  I don't see it on Apple's site anymore and I was told I needed to get ahold of Apple's Pro Divison?

    What's the best way to get a copy of Final Cut 7?

    Amazon.
    Apple stoped selling it officially 20 months ago.

  • I keep getting this message when I try to open FCP X.  "The storage location 'brianmassman1' on this computer is already in use by "brianmassman1" on "Brian-Massmans-Computer-7". To access the location, quit Final Cut Pro on "Brian-Massmans-Computer-7" or

    I keep getting this message when I try to open FCP X.  "The storage location 'brianmassman1' on this computer is already in use by 'brianmassman1' on 'Brian-Massmans-Computer-7".  To access the location, quite Final Cut Pro on 'Brian-Massmans-Computer-7' or remove the location."
    I have no idea what this means.  Particularly the part about "Brian-Massmans-Computer-7."  I don't even know what computer that is. 
    I'm guessing it could have something to do with the fact that I've still got FCP 5 installed.  But it's not running.

    Try repairing permission in the Disk Utility and rebooting,

Maybe you are looking for