The PSE 12 DVD disc does not read. I am using windows7.

I purchased Photoshop elements 12 from a retailer. Other DVDs read correctly. Could this disc be corrupted? Can I download PHotoshop elements using the serial number on the DVD box.

Can I download PHotoshop elements using the serial number on the DVD box.
Download and install the PSE12 trial version from the Adobe website.
Enyter your serial number to license it.

Similar Messages

Tecra M5: DVD drive does not read these mini DVDs

I have canon dvd handycam, and mini dvd works on it. One month back i recorded movie and pictures on mini dvd using handycam and ran mini dvd on my tecra M5 dvd drive, it worked very fine.
Now after 1 month i have 5 mini dvds with movies and pictures which i took on 1 month vacation in diffierent countries, i tried my best but tecra dvd drive does not read these mini dvd, cd drive label appears instead dvd drive when i put mini dvd in it.
All other standard size dvds, cds working fine on it.Its complicated and as well as irritating.
Any suggestions?
Why its messedup?

Seems the lens cannot read this miniDVDs. Possibly the drive lens cannot calibrate and therefore the miniDVDs are nonreadable.
Try the solution from sascha. Maybe youre a lucky man and it works.
If not, try to remove the drive physically from the notebook. Reboot the notebook without the drive. The Windows and BIOS shouldnt recognize the drive.
Then shuts down again, put the drive into the notebook and boot up the unit.
The notebook should recognize the drive and should indicate the firmware again.
Im not sure if this will help you but its attemptable

My external Iomega DVD drive does not read DVDs. Why?

My external Iomega DVD drive does not read DVDs. Why?

what does this question have to do with a mac? post in the Iomega fourms.

Dvd drive does not read dvd but reads cd only.

my hp compaq 420 core2 duo dvd drive does not read the dvds but only reads the cds. How can i solve this problem, please help me with the correct answer.
This question was solved.
View Solution.

It will likely require replacement of the drive. There is more than one laser in there: one for each function. One can go bad without the other going bad.
608141-001
Above is the part number for the DVD burner drive. I could not find one on eBay. Here is one online:
http://www.mydvddrives.com/replacement-for-hp-compaq-608141-001-sata-cd-dvdrw-dvd-ram-drive-burner-l...
Replacement is easy. Remove a single screw on the bottom and slide the old drive out and replace with the new drive.

Equium P200 - DVD drive does not read all discs

My DVD Drive has just started reading some discs and not others, also some of the discs are not read all the time, you can put a disc in click on the dvd drive and it'll open the drive and say insert a disk, device manager says device working properly and driver upto date.
Does anyone know what the problem is?

Yes, terentino is right. Would be helpful if you could tell us which discs exactly work and which not. Maybe that would give the answer.
Did you installed more than one burning application? Sometimes several installed burning applications could interfere with the other one since every application installs some kind of libraries with their own burning/driver engine to control the functions of your drive.
bye

CD/DVD drive does not read all DVD formats and regions

Hi
My Teac-dw-224e-a does not read all DVDs formats and regions.
It does read CDs but no DVDs at all.
Not DVD-R and not even regular DVDs. I have checked the region of the DVD.
I have reinstalled the driver and also tried with different software.
What can I do?
Please help!

Hi
It is possible that your DVD drive has wrong region settings.
In this case it is not able to watch all possible DVD movies from different regions.
Of course you can change the settings 4 times. But after this changing the settings are fixed and its not possible to change it anymore.

Dvd drive does not read dvds

my laptop does not read dvd disks but its able to read some cd disks.
what should i do

Are there any discs that it can read?
Try looking at this article.
What can I do if my CD or DVD drive doesn't work properly?
- Peter

DVD Disc does not play

DVD Player not responding when I insert a disc. The DVD menu doen not come on screen...not even a black video screen. In applications, the option under DVD is to automatically open DVD player. The disc plays fine on my old clamshell so I know the disc is good. Any ideas...thanks

Hi b
Most probably You didn't use Verbatim DVD discs
or not DVD-R
or burn speed x1 but may be x16
My worst scenario "No-Name DVD+RW and x16" and with less than 5Gb free space on
internal hard disk.
*Quality of the DVD-disc depends on several things.*
• I DON'T USE the function Share/Export to iDVD from within iMovie - IT IS DESTRUCTIVE !!
Just drop the movie project icon (with a Star on it) into iDVD theme window - then iDVD do the
rendering and so much better. Especially if there is photos in the movie.
• Free space on internal (start-up) hard disk - should be about 25Gb when all material is imported
and structured. This for iDVD to work with - iDVD can't use an extern hard disk as scratch.
(less than 5Gb - result is most probably of no use at all)
• Best Quality isn't Top - better is Best Performances (up to 60 min. movie)
confused naming -
in iDVD'08 there is Pro Quality AND I like it. (and 120 min.)
• Media brand - I use Verbatim
• Type: IF SL DVDs -> DVD-R my choice no DVD+R or +/-RW
• I save a Disc-Image and burn this at an as SLOW speed as possibly (eg x1) with Toast™
(Disc Util tool can also do this)
in iDVD’08 this can be set - not in previous versions AND IT IS IMPORTANT - Less errors and gives
a disk that plays on more type of players eg PC or Mac computer that are more selective than
stand alone DVD-players.
from Karsten:
• Keep to same standard NTSC or PAL trough all steps
from: Matti Haveri:
• Is it jerky (=maybe some part of the workflow deinterlaced the footage -- iMovie can do this behind the users's back quite well!)
• Or is it awfully jerky (=maybe the field dominance is wrong -- this happens very easily when importing upper field first stuff from MPEG).
This is what come's first to my mind.
Yours Bengt W

In printing only a specific selected section, the top line or 2 of the printout is not printing. This only happened since the last update. It does not happen when I use internet explorer.

I read many financial documents during the day. I sometimes print only a selected segment of an article or a financial statement. When I print selected only, the top line or 2 lines is omitted from the print document. It does not happen in explorer.
I used Firefox for years, and this just started in the last 3 weeks or so. I can get around it by just selecting 2 lines above what I want to print. But, it is annoying.

* [[Printing a web page]]
* [[Firefox prints incorrectly]]
Check and tell if its working.

The audio in app videos does not play. It used to so I think it is an ios6 problem.

Tha audio in app videos does not play. It used to and works in Safari so my guess is it is an ios6 issue. Any ideas? Thanks.

From Finder menu select Preferences -> Sidebar tab, and tick External disks

My MacBook Pro accepts the DVD but does not read it ( no icon too )- I cant eject it too!!

Hi,
I have a MBP 8.2. My MBP accepted a DVD in but after some whirring noises, it does not show any DVD icon or read the DVD. I checked to see if i could see the icon in My diskUtility; but it isnt shown there. I opened iDVD and checked if i could open a new project,; it asks me to insert a DVD. So apparently it doesnt know there's a DVd in it.
I tried restarting while pressing the trackpad button, but it doesnt work . I think Ive tried almost all the tricks mentioned on every site. I dont want to do the Card trick as it would make my warranty void. I should also probably mention there is no emergency eject hole.
Please HELP! Is there any other way to get the CD out? . Also would upgrading to Lion help with this problem??

Have you tried to enter in Terminal (in the Utilities folder):
drutil eject
and then press the 'return' key.
If that fails, position the MBP where gravity is your friend, shake it a bit with a vacuum cleaner engaged.
Last resort is the Apple store.
Ciao.
Installing Lion will not solve this problem.

The lightscribe DVD drives does not read media. Attempted software upgrade to no avail. Error.

The drive would not read media regardless of type or format of CD/DVD. Downloaded and attemted lightscribe DVD software upgrade; however, during installation system generated error stating "InProc Error". Something in programming of upgrade (get file...).

You may want to try this Microsoft Fix-It.
What can I do if my CD or DVD drive doesn't work properly?
You could also try using System Restore to restore a previous restore point from before this became an issue.
If that doesn't work, you could try a recovery. Recovering your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system recovery will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide. On most models you can hold '0' (zero) with the computer turned off. Then press the power button while continuing to hold '0' until the recovery utlity starts.
- Peter

LaCie d2 DVD Burner Does Not Read Discs

Anyone experienced a similar problem or have a solution?
I've just bought a LaCie d2 16X DVD burner w/ Lightscribe and have it connected through firewire to my 1Ghz iBook G4 running OS 10.4.7
iTunes 6 and Toast Titanium 7 recognize the burner, but when I insert a blank CD or DVD the burner doesn't read it and I get a 'no disc' message in Toast.
Neither burner nor discs appear on the desktop.
I've tried installing the latest LaCie Update Tool firmware from their website, but I just get the following message when I run it: "LaCie DVD Update Tool found a DVD drive CD/DVDW SH-S162L but there is no update available. (The firmware is at vLC00)."
That doesn't sound right. I've tried with a USB 2 hook-up and it still doesn't work.
Anyone know of any way to get the burner to recognize blank media? (I've tried it with different brands, being very careful that the disc is positioned in the middle of the tray. Nothing works).
Thanks.
Jake B
iBook G4 1Ghz Mac OS X (10.4.7)

1. You wrote: "I've experimented with multiple media, all to no avail."Yes, but you did not respond to point 1 in my last post: what media is supported?
2. You wrote: "Burn Support: Yes (Unsupported)."You might want to take a look at the items concerning "burn support" on this XLR8YourMac page. In situations like this, sometimes one can burn from the iApps (iTunes, iDVD, etc.) but not from Finder or Disk Utility. I've not found specific documentation on that value, but I believe it means that the device can burn discs (Yes) but the method is not one supported in Mac OS X, i.e. it's not listed as a supported device in the DiscReording Framework.
Many folks have had luck getting their unsuported external optical drives to working with Patchburn. I've not used it, but it has helped innumerable folks.
3. You wrote: "I'm ready to send this lemon back."I don't blame you. However, you may first want to give LaCie Support a call. See this page for their phone number and hours.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

MY DVD drive does not read all DVDs and also does not burn CDS properly. Often while burning a CD i am prompted that " The machine is unable to caliberate teh required Lazer Power"

Hi i am having a i MAC which has mountain lion OS 10.8.2. I am facing teh followwing issues with my disk drive
1. I am unable to read all DVDS in it some DVDS work while others do not
2. I am able to read all CD's, but while burning a CD i am prompted with the following message
" Unable to caliberate lazer power"
3. Kindly assit me in solving this problem
regards

Hi
Four thoughts
• Brand and type of DVD/CD Media
• Burn Speed ?
• Ever used a Cleaning DVD ?
• Free space on Main Start-Up Hard Disk ?
Brand and type of DVD/CD Media: MATTERS
- Memorex, NoName and other Cheap brands - most probably works for other things BUT NOT FOR VIDEO.
I only use Verbatim
- DVD-RW - usually do not work OK but with various kinds of problems. DVD+R is a more modern sort and use to give problems on older DVD-players
I only use DVD-R
Burn Speed (in iDVD or alike): Matters
• Best or Max - is not best
I set it down to x2 or x4 Max
Ever used a Cleaning DVD ?
I use one WITHOUT Liquid but with brushes from time to time
Free space on Main Start-Up Hard Disk ?
- Due to that Mac OS X - is UNIX - it behaves likewise. It needs lot's of space on Boot / Start-Up Hard Disk for it's and the applications temp files.
I never go less than 25GB free space - If HD-Video material is used then 4-5 times more is a good thing.
Yours Bengt W

CD/DVD-drive does not read/write properly

I can not write any dvds or cds because every time a message pops up with an error.
I tried different burning programs with different cd manufacturers and it still does not seem to be a problem on other computers having the same program and using same cds or dvds.
Another thing is that it can not read dvds all the time; same dvd can work once but not again and whenever i try to open a normal cd-r it says blank disc even when they work perfectly on other computers?
can anyone plz help

hey ..ok im on a toshiba laptop SA50-543 usind windows XP home edition..the dvd/cd thing is built in and is a DVD rewritabl CD rewritable multiple recorder.
as for the programs i used for burning..i tried nero,sonic record now and the one im on now is roxio easy media creator
as for the error msg it says:
there was a problem writing to the disc.you can try again by clicking the retry button.you will need another blank disc ready.
further info:
Recording error
Recording errors can occur when a disc contains dirt, fingerprints, or scratches.
If you are getting recording errors:
Try using a new disc.
Try using a different manufacturer??s disc.
Ensure the disc is clean before recording:
Remove all fingerprints, dirt, and dust from the shiny side of your disc using a nonabrasive cloth with a mild, nonabrasive soap solution.
Wipe the disc from the center to the edge.
Dry the disc completely.
tried doing all of that and still not recording..and anyway if it was aproblem with the cds why would they work fine on other laptops?
i dont know which other info you need so let me know if theres anything else
Oh yeah, theres an advanced explanation for the recording error but its all in numbers do you need to know that?
thx

The PSE 12 DVD disc does not read. I am using windows7.

Similar Messages

Maybe you are looking for