The PST files are rather large and contain tons of folders each

The PST files are rather large and contain tons of folders each, so it's kinda hard to go through each one finding this very specific Subject line. Is there any other way to scan within the PST files to find a particular text string, like this Subject
line? Before I start googling this stuff, I thought someone might already been there/done that.

Great, but all pst files aren't indexed so this could take a long time if you try it this way.
Outlook Recovery Toolbox from: http://goo.gl/MU7fEk and it helped me to get the PST data after a heavy corruption. This is the capable software which can also be used to get the deleted pst data like emails
etc. You can find it here: http://goo.gl/MQn5gI

Similar Messages

Transcode not needed, but the exported files are very large

Hi. I imported a video file (*.m2v) and its associated audio file (*.wav) to Encore. These two files were transcoded and exported by Premiere Pro (setting of the Encoder was MPREG-2 DVD). Now, in Encore, I chose NOT to transcode, because the files are DVD compliant already, and second their total size was less than a DVD's capacity (video file 3.3GB, 6Mbps;;;; Audio file 850MB, 1.5Mbps). My question:why did the Exported Dvd have 7.5GB in size?? Though the total size of video and audio is (3.3+0.8=4.1GB). I have a main menue only that has no fancy stuff nor motion.

Thanks Ruud Blauw. You were right. I used the same assets in two time lines, which resulted in exporting the movie in two twin copies, each was put as a single title in the DVD. What bothers me is that I had no way of seeing this on the [Timeline Viewer]; in other words, I couldnt see two time lines before I export the movie.
After experimenting, I realized that the first"wrong" situation differed from the new"correct" situatioin in only the [Project Tab]: the 'wrong' situation had 4 items in the [Project Tab]: Video file, Video Timeline, Audio File, Audio Timeline. On the other hand, the 'correct' situation had a [Project Panel] which had only 3items: Video File, Video Timeline, Audio File. This means that the difference was only the existence of an Audio Timeline.
Although I am new to Encore, this makes no sense to me. But fortunately it got resolved.

Getting message about not enough storage on my iphone 5s. The "Attachment file is very large and I have erased all documents in it, yet it still shows a large volume of storage being used.

I am getting a message that I am running out of storage on my Iphone 5s. The problem may be in my mailboxes. I have eliminated many emails and all documents in the "Attachments file. However, the attachment file still shows an number that is over 4 billion (not sure is this is the number of documents or what it represents) Is this is the source of my storage problem, I'm not sure how to solve it.

Couple of things to try:
If you can access the account on a computer - make sure that the offending email is no longer there
Then delete the email account on the phone - no email loss is incurred
Then reset the phone - hold down home and sleep buttons together until you see Apple logo and then release and allow normal boot up - no data loss
Then reinstall the email account
(975)

Missing all files of a folder and the pst file cannot be repaired

All files under folder Inbox\TechSupport suddenly are missing. The Folder Size window shows this folder has a size of 180719KB.
I used "C:\Program Files\Microsoft Office\Office15\SCANPST.EXE" to try to fix the post files a few times, the problems remains. No matter how many times I run SCANPST.EXT on this pst file, it always find the following error:
Internal errors were found in this file. They must be repaired for this file to work correctly.
Here is the log:
Microsoft (R) Inbox Repair Tool
© 2012 Microsoft Corporation. All rights reserved.
Version 15.0.4667.1000
**Beginning NDB recovery
**Attempting to open database
**Attempting to validate header
**Attempting to validate AMap
!!AMap page <@416752640> has csFree of 7, but should have 255
**Attempting to validate BBT
**Attempting to validate NBT
**Attempting to validate BBT refcounts
**Attempting to validate header NID high-water marks
**Beginning PST/OST recovery
**Attempting to recover all top-level objects
**Store created by build: 15.4667
**Attempting to walk all folders
**Attempting to locate any orphaned folders/messages
**Performing final HMP validation
**Attempting to check top-level objects for consistency
**Updating folder hierarchy
**Attempting to fix original file
**Attempting to copy back BBT
**Attempting to copy back NBT
Any tip to remedy this will be greatly appreciated.
Hong

Thanks for the update, Hong.
If we copy some emails to TechSupport folder, are those emails still visible in the TechSupportfolder?
Although it doesn't look like a view problem, we may also try to open Outlook with /cleanviews switch to seek our fortune. To do this, exit Outlook, press Windows key + R to open the Run command, type
outlook /cleanviews and press Enter. We may also try to search for the missing emails using Instant Search to see if there is any result.
In addition, we may also try to use the MFCMAPI tool to look into the TechSupport folder and check if we can see and open the missing emails. To do this, please follow the steps below:
1. Download MFCMAPI tool: http://mfcmapi.codeplex.com/
2. Exit Outlook and start MFCMAPI.exe.
3. Click Session > Logon, choose your profile and click
OK.
4. Double-click the PST file that has this issue from the list.
5. In the opened new window, expand Root Container > Top of Outlook data file > Inbox.
6. Find and right-click the TechSupport folder under Inbox, select Open contents table.
7. In the opened new window, check if you can see your emails in the upper portion of the window. If so, double-click an item to see if you can open the email in Outlook window.
Please let me know the result.
Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Outlook 2013 are not opening and showing pst files are not closed properly

Hi
Outlook 2007 has stopped working and showing close the program. Again,we re-started then outlook 2007 and it has opened and taken the backup of pst files in a separate hard drive.
The pst file was repaired in scanpst.exe and again i have tried to put the pst file back in outlook 2007.It was hanging and suddenly i have uninstalled 2007 and started installing outlook 2013.
2013 applications like word,excel,power point are opening and outlook 2013 are not able to open and showing pst files were not closed properly.
Again i have un-installed and re-installed the outlook 2013.still we are not able to open the outlook.
Need your support at the earliest to fix the issue.
Thanks

Hi,
What's the .pst file used for? Archive? Or you set up a POP3 account and want to import the emails from the .pst file?
Another question, you mentioned you installed Outlook 2013 and it didn't open either. Was this from the beginning right after you installed Outlook 2013, or after you did something such as create a new Profile, set up a new account and tried to import the
.pst file?
Kindly answer my questions so I can understand the situation better.
I've seen some of this issue caused by the anti-malware software, check your anti-malware software to see if it's trying to interfere with Outlook - things like real time email checking can sometimes cause these kinds of problems. To troubleshoot, we can
simply disable the anti-malware software temporarily to see the result.
Regards,
Melon Chen
TechNet Community Support

Why are the DNG files from my RW2 raw files are so large (37MB)?

I have a fairly new Panasonic Lumix LX5. I've recently converted a few files to DNG.
They're turning out to be @ 37MB, over three times larger than the original file.
I'm not embedding the original raw files in the DNG.
NEF files I convert from my Nikon D2x are around 9.5MB.
I'm running Mac OS 10.5.8, DNG v 6.6 and also use PS CS5.5 and Lightroom 3.0.
Any ideas??

Thanks R_Kelly!
I was using the DNG converter app.
I just tried converting a RW2 raw file by saving it in from the ACR window in CS5 with your recommended settings:
Compatibility 5.4 and later
Jpeg preview:medium size
without orginal raw file embedded.
This yielded a 9.7MB DNG file. Yeah!!
So I went back and tried a couple using the DNG converter app.
With compatbility set to 4.6 & later, the converted files are 37MB.
But with compatiblity set to 5.4 & later files are 9.7 MB.
This is the same when using either the app or from ACR.
So the difference here is the compatiblity setting.
Does anyone know why this happens??

I am having problems combining 2 pdf's together. When I do it crashes Acrobat XI. The files are fairly large about 20Mb each if that helps. Others have been able to combine them without issue. Any Ideas?

I am having problems combining 2 pdf's together. When I do it crashes Acrobat XI. The files are fairly large about 20Mb each if that helps. Others have been able to combine them without issue. Any Ideas?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

I updated imovie and I Used to be able to save as Quicktime file, now not an option & files are so large when I save as mpeg4 and just rename them. Please help!

I updated imovie and I used to be able to save as Quicktime file, now not an option & files are so large when I save as mpeg4 and just rename them. Please help!

Actually it is easier than I thought. It is H264 but the wrapper is m4v. You can just change that in the finder to .mov and drop it into iDVD. iMovie will send it to iTunes so just right click on it in iTunes and select reveal in finder and then copy/paste to desktop and change to .mov. Then drag into iDVD. Really easy.

I saved a word file onto my imac. when i go to open file in documents with pages the file is grey and unable to open. the workable files are highlighted in bold. is there a way to open this file????

i saved a word file onto my imac. when i go to open file in documents with pages the file is grey and unable to open. the workable files are highlighted in bold. is there a way to open this file????

THis is safe for Mac's? Sorry, I have just never heard of this site before.
And there are literally tens of thousands of sites of which I've not heard, too. Not this one.
It's legit. There are lots of links in Apple Support Communities to the LibreOffice web site, as well as others that are legitimate open-source developers of options to buying MS Office, such as NeoOffice and OpenOffice. I have Open Office installed on one of my older Macs that can't run Office 2011 and it is rock-solid.
I've been here too long to start posting bogus urls now.

"Volume not found" I have 3 iphoto_libraries stored in a external disk, while the actual files are in other external disk. Ive moved together iphotolibraries and files but: HOW CAN I TELL THE LIBRARIES WHERE TO FIND THEM NOW?

I have three iphoto_libraries stored in a external disk PASSPORT (one for each trip imovie Im making -Ive managed this way the libraries so to not confuse the trips) while the actual files are in OTHER external disk LACIE. And everything was fine: imovie find each library, could work with it, or iphoto could edit the files.
But one day everything crashed at the same time: i opened iphoto to find 3 different scenarios:
1) iphoto_library GREECE was there, but not the albums i prepared. no events. when double click in any of them: "Volume not found"
2) iphoto_library ITALY was there, and the albums i prepared too, but empty.
in both cases I can only see the photos in 'photos' because 'events' shows some events with photo preview and some with no preview, just some kind of preset clipart palm tree, but if i enter the event, photos are there but again: when double click in any item: "Volume not found"
3) iphoto_library ISRAEL was there, the albums too, when double click in any of them: all OK
The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT. Also: I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied. Also i have all the movie_libraries in the PASSPORT as well. What happened??
Solution? Nothing yet. Ive moved now all the photo folders from LACIE together in PASSPORT with the iphotolibraries but problem persist:
HOW CAN I TELL THE LIBRARIES WHERE TO LOOK FOR THE VOLUMES NOW?
"Volumes" are the original files aren't them?
Please help. this is so annoying to try and find in the forum, to tricky to explain
I have a Macbook pro retina Yosemite 10.10.1 / iphoto 9.6 (910-29)/ iMovie 10.0.6
THANK YOU
Vicky

The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT.
This is not clear, especially when you say
I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied.
Especially as the message you're getting is typical of a library where the ' option "copy to file" or something like that' is unchecked.
So it's a simple question:
Are you these Managed or Referenced Libraries?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

I moved iTunes folder location, now all my personal song ratings and playlists are gone. How can I get them back? All the iTunes files are intact, just in a new location. Running iTunes 11.1.5.5

I moved iTunes folder location, now all my personal song ratings and playlists are gone. How can I get them back? All the iTunes files are intact, just in a new location. Running iTunes 11.1.5.5 on Windows 7

Put everything back the way it was.
Them move the folder correctly.
http://support.apple.com/kb/ht1364

I just updated to 5.7 and the exported files are blurry. I compared the ones I exported before the change and they are fine. I have not change any settings.

I just updated to 5.7 and the exported files are blurry. I compared the ones I exported before the change and they are fine. I have not change any settings.

I don't understand your last paragraph.
"The home page also has a full bar ..." What does "full bar" mean? " ... instead of the tray it had before." What does "tray" mean?
Anyway, you might try Settings > General > Reset > Reset Home Screen Layout
I guess that cannot make things any worse.

I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server.

I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server, but this message continues to pop-up several times a day at random intervals. Is there something I'm doing wrong? Or is my computer just having a glitch? Other than that, and a mildly sticking caps lock button, it's working perfectly.
Thank you!

Alright it didn't solve it. Any other suggestions?
I haven't suggested a solution yet. I want to know whether you still get the messages while Time Machine is disabled. Do you? If so, try any or all of the solutions proposed in this thread:
There was a Problem connecting to the...: Apple Support Communities

HT5731 how can I cancel or delete a movie i downloaded to my iPhone? The file is too large and it is hung up during the download process

How can I cancel or delete a movie I tried to download to my iPhone? The file is too large and iTunes is hung up during the process of downloading. I've tried to swipe from right to left but that doesn't produce a delete button....

Slide your finger across the videos' listing in your iPhone Videos App and tap the red "Delete" button that appears.

I have Prem. Elements 12. I am trying to add audio media. I know where the audio files are located (using GET INFO while in iTunes), and when I try to add certain audio files, some are accepted and some are not. In one case, when I opened a particular

I have Prem. Elements 12. I am trying to add audio media. I know where the audio files are located (using GET INFO while in iTunes), and when I try to add certain audio files, some are accepted and some are not. In one case, when I opened a particular folder, the song was not listed, even tho' the song is there when using Windows Explorer. This happens with mp3 and mp4 and just wav files. Some audio are accepted, most are not. I get that codec is not installed error message, too.

Perhaps it would be helpful for you to view the page source code of this page
http://www.alanwork.com/
As you can see, the submenu code links are immediately below the top level code, and are
wrapped in their own <UL> </UL> tag pairs.
Hope that helps

The PST files are rather large and contain tons of folders each

Similar Messages

Maybe you are looking for