The Purchased button didn't show up after I purchased a song.

Hi,
I brought Haim single a long time ago and the purchased button was shown back then.
But recently, the record label updated the band name to be "HAIM" (all caps) and the Purchased button was reset.
Right now, I'm able to purchase a song again even though I already have that song on the library and iCloud.
It's not that important but it's kind of frustrate.
Does anyone knows how to fix this?
Thanks

It is hard to exactly understand what you have done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
Updating a Chart Copied from a Numbers Document
If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
Select the chart on the page and click the Refresh button that appears.
Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
I hope it has helped you.

Similar Messages

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

It is hard to exactly understand what you have done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
Updating a Chart Copied from a Numbers Document
If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
Select the chart on the page and click the Refresh button that appears.
Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
I hope it has helped you.

Install from SCSI CD fails: ERROR: boot device didn't show up after 30

I have a x86 based server w/SCSI HD and DVD drive.
Install fails with following.
Waiting 30 seconds for device /dev/disk/by-label/ARCH_201108
ERROR: boot device didn't show up after 30 seconds
Falling back to interactive prompt
You can try to fix the problem manually, logout when you are finished
sh: can't access tty; job contro turned off
[ramfs /]#
I hooked up a IDE DVD drive and using same CD installs OK. Then, once installed, I switch my DVD back to SCSI that failed the install, and guess what? Arch booted from my HD now recognizes the SCSI DVD drive, I can mount it and so on. Looks to me like the install kernel doesn't support my SCSI DVD drive but the installed kernel does.
I need the Arch install to work from the SCSI DVD drive on my system. I'm trying to develop an Arch distro for my particular system, which there are about a dozen of in the field, they all have SCSI DVD and no IDE drives. Will I have to add a SCSI driver to the boot kernel? Or is my problem something else?
I notice there is no /dev/disk/by-label (ther is a /dev/disk/by-id by-label and by-uuid).
I do a:
"[ramfs /]# lsmod | grep sr_mod"
sr_mod 14951 0
cdrom 36329 1 sr_mod
scsi_mod 131482 7 sg,sr_mod,sd_mod,libata,mptspi,mptscsih,scsi_transport_spi
[ramfs /]# lsmod | grep scsi
mptscsih 20040 1 mptspi
mptbase 63459 2 mptspi,pmtscsih
scsi_transport_spi 20059 1 mptspi
scsi_mod 131482 7 sg,sr_mod,sd_mod,libata,mptspi,mptscsih,scsi_stransport_spi

scrath "I notice there is no /dev/disk/by-label (ther is a /dev/disk/by-id by-label and by-uuid)."
Should be: I notice there is no /dev/disk/by-label (there is a /dev/disk/by-id by-path and by-uuid).

The "apply" button didn't display when I was using the "write back" option

I followed the "System Administrator's Guide" to configure the write back function, unfortunately,
the "apply" button didn't display. Is there anyone can give some advice? Thanks!

Just to check, did yiou restart the presentation services after placing the xml file?
Is the template name in answers "SetKPIValue" consistent with the .xml file as you mentioned?
Now, if you could try by putting a hard coded value in the update statement as well.
Also, is the location where the .xml file is kept is,
ORACLE_INSTANCE/bifoundation/OracleBIPresentationServicesComponent/coreapplication_obipsn/analyticsRes/customMessages
P.S. Numeric columns must contain numbers only. They should not contain any data formatting characters such as dollar signs ($), pound signs or hash signs (#), percent signs (%), and so on. [Oracle Admin Guide]
Edited by: 855532 on Jul 13, 2011 1:52 AM

Dual Boot Arch & Mac OS X(Boot device didn't show up after 30 seconds)

I was trying to Dual Boot Arch & Mac OS X on my new Mac book pro, I followed the steps (https://wiki.archlinux.org/index.php/MacBookPro)
Dual Boot (Arch & Mac OS X)
Two possibilities:
- Install Bootcamp, resize the Mac OS X partition
When Mac OS X installation is finished. Go on http://refit.sourceforge.net and download rEFIT (Mac disk image)
To install rEFIT, mount the rEFIT.dmg file (it is normally automatic).
There is an other way (refer to rEFIT documentation) but you can open a terminal then you copy /Volumes/rEFIT/efi/ to /
# cp -r /Volumes/rEFIT/efi /
To install rEFIT :
# cd /efi/refit/
# ./enable.sh
Now we can synchronized MBR with GPT partition table thanks to rEFIT so you restart your computer. You can see rEFIT, you press down key to access to the Partitioning Tool. You press y to accept.
Put your Arch Linux CD in the CD-ROM drive first then restart the computer. You can press C to boot from the CD or you can choose it in the rEFIT menu.
Now it is the typical Arch Linux installation.
So I burn the archlinux-2010.05-core-i686.iso to an blank disc on mac then restart the computer , press C to boot from the CD.
After choose to boot Arch linux and then I got this
Waiting for 30 seconds for device /dev/disk/by-label/ARCH-201005...
ERROR:boot device didn't show up after 30 seconds...
Falling back to interactive prompt
You can try to fix the problem manually, log out when you finished /bin/sh: can't access tty;
job control turned off
[ramfs /]#
[ramfs /]#
Any ideas?
Thanks!

heleos wrote:
This line:
Waiting for 30 seconds for device /dev/disk/by-label/ARCH-201005...
You need to make sure that's the exact name of your iso disc. If it's not, it isn't a big deal. I've run into problems on this with my arch USB drive.
Once you get to the [ramfs /]# prompt, type in:
mv /dev/disk/by-label/(insert name of the current cd here) /dev/disk/by-label/ARCH-201005
exit
It should then be able to boot from the cd
did:
mv /dev/disk/by-label/(insert name of the current cd here) /dev/disk/by-label/ARCH-201005
exit
shows:
ERROR: mounting was successful, but /bootmnt/isomounts file doex not exist.
Then I checked:
cd /bootmnt
ls
archlinux-2010.05-core-i686.iso
exit
shows another problem /boot/init does not exist
exit
kernel panic!

I just downloaded itunes 11.4 and the "Summary" button does not show up?

Hello,
I just downloaded iTunes 11.4 on my Windows 7 Premium laptop to perform an encrypted backup of my ifone 4 before receiving my ifone6. However, the "Summary button" is not showing up in iTunes. So I'm not able to select encrypt backup. I can perform a non-encrypted backup by going File->Devices->backup and that seems to create a backup. But without the ability to create an encrypted backup my passwords won't be saved in the backup, is this true? Does Versions 11.4 automatically encrypt and save off all the ifone passwords?
Kind regards,
123skern

Go to settings -> iCloud and turn calendar on. This should hopefully resolve your issue

The decline button is not showing up on IOS 7 iphone 5(when phone locked). could you please advise me on this?

The decline button is not showing up on IOS 7 iphone 5(when phone locked). could you please advise me on this?

Is it because the new itunes looks different.
View > Show Sidebar
Then it should work just the same as on your old computer.

I was upgrading my iOS last night but when I checked to see the progress ,the home page refused to show. After d apple icon comes on the screen immediately changes to show the iTunes icon with a charging port cable

I was upgrading my iOS last night but when I checked to see the progress ,the home page refused to show. After d apple icon comes on the screen immediately changes to show the iTunes icon with a charging port cable. What should I do?

That means that you have to connect your iPad to your computer and you need to use iTunes to restore the iOS. Software. Read this for the instructions.
iTunes: Restoring iOS software - Support - Apple

Suddenly the WiFi button does not show up.

hi, i have an iPhone brand new and Suddenly the WiFi button does not show and i try to fix that with reset the network but still does not work can you please help me. thanks.

DId you try to fully restore with itunes? I have the same issue with my iPhone 6 and tried restoring it but wifi and Bluetooth still dont work. And it keeps restarting. Will tare to a Genius Bar, i think It's a hardware issue.

In menu list, anyone of the menu list name is showing blank after make some changes

Hi all,
I have seen this issue a lot of time.
device 8820,OS v4.2.1.x
In my application's popup menu list, anyone of the menu item from the menu list name is showing blank after make some changes.When I select blank field that functinality is working.
Can anybody tell the reason of this issue?
Regards,
Ashutosh

Have a reset to your device by pulling the battery out for 30sec.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

The hit counter button does not show up after publishing page.

I insert the hit counter button to a new blog post and when I publish, the button does not show up.
I would really like to use the counter as this is a blog for a class I am teaching, and I would like to track
student viewing.
Also, sometimes the colors do not publish properly, specifically with links/rollover feature.
Help!
And thanks in advance for all you who know wayyy more than I do! I hope to return
the favor someday.

First, thanks for the quick response Roddy.
Once I posted the question, similar topics came up and what
I did was remove the hit counter, publish the page without the hit counter.
Then inserted the hit counter again and wah-lah!
Thanks for your reply, this information is correct and helpful as well.
Very appreciative!

If i press the Find button didn't get the all fields

Hi...........
If i press the find button only two fields get the values remaining fields didn't get the values
:CONTROL_1.ASSET_NUMBER := i.asset_serial_numebr;
:CONTROL_1.INSTANCE_NUMBER := i.serial_number; ---------------only this two fields are inserted.
actually in loop first i taken those two fields then i taken begin i wrote select statement it's not working i think tats why only two fields are get the values.
i wrote this code in find button
declare
     cursor c1 is
     select aa.serial_number asset_serial_numebr,
aa.instance_number serial_number
from mtl_eam_asset_numbers_v aa,
mtl_eam_asset_attr_values av
where aa.serial_number = av.serial_number
and aa.MAINTENANCE_OBJECT_ID= av.MAINTENANCE_OBJECT_ID
and av.attribute_category = 'Expected Life Details'
and av.c_attribute3 not in ('Stolen','Under Disposal')
and aa.inv_organization_id = :global.ORG_ID
and aa.inventory_item_id = :CONTROL.INV_ITEM_ID
order by aa.serial_number;
     cur1 c1%rowtype;
begin
     open c1;
     fetch c1 into cur1;
     if(c1%NOTFOUND) then
          go_block('CONTROL_1');
     clear_block;
          fnd_message.set_string('Asset not available for selected group');
     fnd_message.show();
raise form_trigger_failure;
     end if;
     close c1;
     :parameter.RECORD_COUNT := 0;
     go_block('CONTROL_1');
     clear_block;
     first_record;
     for i in c1
     loop
          :CONTROL_1.ASSET_NUMBER := i.asset_serial_numebr;
          :CONTROL_1.INSTANCE_NUMBER := i.serial_number;
     begin
     select
     depr_method,
     commision_date,
     asset_cost,
     asset_life,
     salvage_life,
     period,
     months,
     pre_depr_cost,
     pre_cost_after_depr,
     remarks
     into
     :CONTROL_1.DEPR_METHOD,
     :CONTROL_1.COMMISION_DATE,
     :CONTROL_1.ASSET_COST,
     :CONTROL_1.ASSET_LIFE,
     :CONTROL_1.SALVAGE_LIFE,
     :CONTROL_1.PERIOD,
     :CONTROL_1.MONTHS,
     :CONTROL_1.PRE_DEPR_COST,
     :CONTROL_1.PRE_COST_AFTER_DEPR,
     :CONTROL_1.REMARKS
     from xxeam_depreciation_master
     where org_id = :global.ORG_ID
     and inventory_item_id = :CONTROL.INV_ITEM_ID
     and instance_number = :CONTROL_1.ASSET_NUMBER;
     exception
          when no_data_found then
          null;
     end;
     :parameter.RECORD_COUNT := :parameter.RECORD_COUNT + 1;
          next_record;
     end loop;
     first_record;
end;
Please give me any solution................
Regards
Mohan

Mohan,
We cannot read your mind, so you need to describe what you are trying to do in greater detail.
And always post your indented code in code tags like this, {code}..your code here..{code}
begin
open c1;
fetch c1 into cur1;
if(c1%NOTFOUND) then
go_block('CONTROL_1');
clear_block;The Fetch is not in a loop, so only the first row will be read.
And then suddenly we see
for i in c1
loop
next_record;
end loop;And what FOR i doing in this place? Where is the fetch for the second record onwards?
Too many errors in the code.
Regards,

So how do I REALLY get the toolbar buttons to just show icons (and not text)?

On my Bookmarks toolbar, my bookmarks "buttons" show icon AND text. I just want to show icon, not text. When I go right-click.....customize, the window "customize toolbars" opens. Down in the bottom left corner the "show" option dropdown is already set to "icons" (and only icons). But it's just not so. The toolbar buttons show icons AND text. If I cycle through that dropdown just for kicks, it doesn't change; I can choose "icons (only)" all day long, but the toolbar buttons still show text.

Either of the following Add-ons allow you to show icons only and/or to have multiple rows on the Bookmarks Toolbar. Set the options on either after installation.
*Multirow Bookmarks Toolbar Plus - https://addons.mozilla.org/en-US/firefox/addon/multirow-bookmarks-toolbarplus/
*Roomy Bookmarks Toolbar - https://addons.mozilla.org/en-US/firefox/addon/roomy-bookmarks-toolbar/
Other - Check your Plugins and update as needed.
#Check your Plugins - https://www.mozilla.org/en-US/plugincheck/
#'''''Adobe Shockwave for Director Netscape plug-in, version 11.6.4.634''''' (this old version has security issues)
#*http://kb.mozillazine.org/Shockwave
#*Download, save, close all browsers, run the installer you downloaded - http://get.adobe.com/shockwave/thankyou/

What's wrong with my trackpad? It was working fine, then I installed Lion 10.8.1 and now the mac mini won't see it, when I press the on button, a light comes on after a brief pause, stays on for a second or so, and then goes off, still no trackpad..

Ok, so if you haven't worked it out, this is my first post. My problem is all in the title, but once more won't hurt..
I have a bluetooth trackpad which has been attached to my mac mini for a few months now, with only the occasional connection lost, connection found saga that everyone seems to go through. Earlier today, I used the trackpad to upgrade to OSX 10.8.1 nd when the computer rebooted, no trackpad could be found. I've put fresh batteries in, I've tried rebooting the mac mini, I've checked sys preferences and am currently using an old usb keyboard which is v flimsy so forgive any typos please.
The light comes on about a second after the on button is pressed, (whether the button is held down or not) and then goes off after a second, still no trackpad is found..
Why?!!!!

No, not paired to anything else, fresh out the box connected to the mac mini I bought at the same time, never been paired with anything else.
I think it's a hardware issue. As I don't seem to be able to get it to turn off.

The firfox "button" is not showing in my browser window,how do I access it?

the orange button displayed in all the feature aspects, does not show in the top of my menu. How do I access that feature? I currently have the Firefox 4.01 installed, why isn't it there automatically?
have tried to access it through "tools" menu, not finding it there either! :-/

You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden, so you need to hide the Menu bar to get the new appearance.<br />
If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
You can place the Tab Bar on top.
* View > Toolbars : [ ] Menu Bar
* View > Toolbars : [X] Tabs on Top

The Purchased button didn't show up after I purchased a song.

Similar Messages

Maybe you are looking for