The QA process for new extension submission.

Just have a few general questions about the process for new extension submission. I submitted a new extension to the exchange on June 21, but have yet to see the status of my item change. What's the typical turnaround time for the QA team on new extensions? As well, should there be any issue with a new submission, what kind of feedback is typically given? Thanks to those who've gone through the submission experience, and can answer my questions.
kindest regards,
Johannes

To follow up on this question. On August 23rd my extension was approved. Not sure if this is the typical amount of time to expect for a submission to be approved as this is the only extension I've submitted so far. I never recieved any requests to change my extension, so the length of time wasn't due to changes that needed to be made on my part. Based on the large number of extensions approved on the same date as mine, my guess is that Adobe waits till they have a fair amount of submissions to QA, and then puts them through the QA process in batches.

Similar Messages

Process for new hard drive

Hi everyone,
I was hoping somebody could point me to some tutorials for upgrading the hard drive in my PowerBook G4 (1Ghz).
I own an external drive (usb only) that is the same size as the drive in my PB (80gb), this is what I'd use to back up my hard drive (I could borrow a larger drive from work if necessary).
What is the best process for backing up? Should I use Carbon Copy? I already have Retrospect Express.
How can I make sure that I won't need to reinstall all my 3rd party apps (ex; iLife, Photoshop)? Would all of this be ported over when I copy my old hard drive over to the new hard drive?
What is the best process for copying the backed up/copied hard drive to the new hard drive? Won't I need to reinstall Tiger first? Then run updates?
Thanks for the help!

"What is the best process for backing up? Should I use Carbon Copy? I already have Retrospect Express."
I just replaced my drive, I used SuperDuper, it worked flawlessly, a major first for me since using OS X. I swear I'm not from that company, but it made a perfect bootable disk, important since I was swapping drives directly after copying data via USB to external enclosure. Had drive duplication problems prior, carbon copy was a no-go for me, to complicated, something not right w/ the updates, i forget what, it has been a while, just remember I was forced to reinstall apps.
Should have gotten a firewire enclosure, could have tested it first w/ target mode, oh well.

SQL Server 2012 installation failure An error occurred for a dependency of the feature causing the setup process for the feature to fail.

I am installing SQL Server 2012 Developer (from ISO image written on DVD), my machine has Windows 7 (Edit: Windows 7 with service pack 1) on it. This machine already has SQL Express and SQL 2008 R2 Express installed in it.
On running 2012 setup it goes fine from Setup Support Rules to Installation Progress. In Installation Progress after some progress installation fails.
Windows show the following components couldn't installed:
Managment Tools Complete Failed. Client Tools Connectivity Failed. Client Tools SDK Failed. Client Tools Backwards Compantibility Failed. Managment Tools Basic Failed. SQL Server Data Tools Failed. Reporting Services -Native Failed. Database Engine
Services Failed. Data Quality Services Failed. full-Text and Semantic Extractins for Search Failed. SQL Server Replication Failed. Integration Services Failed. Analysis Services Failed. SQL Client Connectivity SDK Failed.
In detail for failure of every component it provide these details:
Action required:
Use the following information to resolve the error, and then try the setup process again.
Feature failure reason:
An error occurred for a dependency of the feature causing the setup process for the feature to fail.
In summary log file it provide the following details:
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -2068643839
Start time:                    2012-07-31 16:23:37
End time:                      2012-07-31 16:33:32
Requested action:              Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS:        Use the following information to resolve the error, and then try the setup process again.
Next step for Conn:            Use the following information to resolve the error, and then try the setup process again.
Next step for SDK:             Use the following information to resolve the error, and then try the setup process again.
Next step for BC:              Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS:            Use the following information to resolve the error, and then try the setup process again.
Next step for BIDS:            Use the following information to resolve the error, and then try the setup process again.
Next step for RS:              Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine:       Use the following information to resolve the error, and then try the setup process again.
Next step for DQ:              Use the following information to resolve the error, and then try the setup process again.
Next step for FullText:        Use the following information to resolve the error, and then try the setup process again.
Next step for Replication:     Use the following information to resolve the error, and then try the setup process again.
Next step for IS:              Use the following information to resolve the error, and then try the setup process again.
Next step for AS:              Use the following information to resolve the error, and then try the setup process again.
Next step for SNAC_SDK:        Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name:                  Haansi-PC
Machine processor count:       4
OS version:                    Windows 7
OS service pack:               Service Pack 1
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
SQL Server 2005      SQLEXPRESS           MSSQL.1
Database Engine Services                 1033                 Express Edition
9.4.5000        No
SQL Server 2005      SQLEXPRESS           MSSQL.1
SQL Server Replication                   1033                 Express Edition
9.4.5000        No
SQL Server 2005      SQLEXPRESS           MSSQL.1
SharedTools                              1033
Express Edition      9.4.5000        No
SQL Server 2005
Tools                                    1033
Express Edition      9.4.5000        No
SQL Server 2005
ToolsClient                              1033
Express Edition      9.4.5000        No
SQL Server 2005
ToolsClient\Connectivity                 1033                 Express Edition
9.4.5000        No
SQL Server 2008 R2   SQLSERVER08EXPR2     MSSQL10_50.SQLSERVER08EXPR2    Database Engine Services                 1033
Express Edition      10.50.1617.0    No
SQL Server 2008 R2   SQLSERVER08EXPR2     MSSQL10_50.SQLSERVER08EXPR2    SQL Server Replication                   1033
Express Edition      10.50.1617.0    No
SQL Server 2008 R2
Management Tools - Basic                 1033                 Express Edition
10.50.1617.0    No
SQL Server 2012
LocalDB                                  1033
Express Edition      11.0.2318.0     No
SQL Server 2012
Reporting Services - SharePoint
11.0.2100.60    No
Package properties:
Description:                   Microsoft SQL Server 2012
ProductName:                   SQL Server 2012
Type:                          RTM
Version:                       11
SPLevel:                       0
Installation location:         F:\x64\setup\
Installation edition:          Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASSQLADMIN:      false
AGTSVCACCOUNT:                 NT Service\SQLAgent$SS2012
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Manual
ASBACKUPDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Config
ASDATADIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Data
ASLOGDIR:                      C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Log
ASPROVIDERMSOLAP:              1
ASSERVERMODE:                  TABULAR
ASSVCACCOUNT:                  NT Service\MSOLAP$SS2012
ASSVCPASSWORD:                 <empty>
ASSVCSTARTUPTYPE:              Manual
ASSYSADMINACCOUNTS:            PC\Haansi
ASTEMPDIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Temp
BROWSERSVCSTARTUPTYPE:         Automatic
CLTCTLRNAME:                   <empty>
CLTRESULTDIR:                  <empty>
CLTSTARTUPTYPE:                0
CLTSVCACCOUNT:                 <empty>
CLTSVCPASSWORD:                <empty>
CLTWORKINGDIR:                 <empty>
COMMFABRICENCRYPTION:          0
COMMFABRICNETWORKLEVEL:        0
COMMFABRICPORT:                0
CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
CTLRSTARTUPTYPE:               0
CTLRSVCACCOUNT:                <empty>
CTLRSVCPASSWORD:               <empty>
CTLRUSERS:                     <empty>
ENABLERANU:                    false
ENU:                           true
ERRORREPORTING:                false
FEATURES:                      SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, BIDS, CONN, IS, BC, SDK, SSMS, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  NT Service\MSSQLFDLauncher$SS2012
FTSVCPASSWORD:                 <empty>
HELP:                          false
INDICATEPROGRESS:              false
INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
INSTANCEID:                    SS2012
INSTANCENAME:                  SS2012
ISSVCACCOUNT:                  NT Service\MsDtsServer110
ISSVCPASSWORD:                 <empty>
ISSVCSTARTUPTYPE:              Automatic
MATRIXCMBRICKCOMMPORT:         0
MATRIXCMSERVERNAME:            <empty>
MATRIXNAME:                    <empty>
NPENABLED:                     0
PID:                           *****
QUIET:                         false
QUIETSIMPLE:                   false
ROLE:                          <empty>
RSINSTALLMODE:                 DefaultNativeMode
RSSHPINSTALLMODE:              DefaultSharePointMode
RSSVCACCOUNT:                  NT Service\ReportServer$SS2012
RSSVCPASSWORD:                 <empty>
RSSVCSTARTUPTYPE:              Manual
SAPWD:                         <empty>
SECURITYMODE:                  <empty>
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT:                 NT Service\MSSQL$SS2012
SQLSVCPASSWORD:                <empty>
SQLSVCSTARTUPTYPE:             Automatic
SQLSYSADMINACCOUNTS:           Haansi-PC\Haansi
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  false
TCPENABLED:                    0
UIMODE:                        Normal
UpdateEnabled:                 true
UpdateSource:                  MU
X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
Detailed results:
Feature:                       Management Tools - Complete
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Client Tools Connectivity
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Client Tools SDK
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Client Tools Backwards Compatibility
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Management Tools - Basic
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       SQL Server Data Tools
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Reporting Services - Native
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Data Quality Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Full-Text and Semantic Extractions for Search
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Integration Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Analysis Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       SQL Client Connectivity SDK
Status:                        Failed: see logs for details
Reason for failure:            An error occurred during the setup process of the feature.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\SystemConfigurationCheck_Report.htm

Please help.
I did what you suggested, but, still got error message to install SQL server data tools: Here is the log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068037632
Start time: 2014-09-29 15:05:38
End time: 2014-09-29 15:15:55
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SSDTBI_VS2012: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: MSBI
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2008 Management Tools - Basic
1033 Express Edition 10.0.1600.22 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Basic
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Complete
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools SDK
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 SQL Server Data Tools
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Integration Services
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\9f7a58aa5d6d76ffe6be968a4ad339f5\x86\setup\
Installation edition: Express
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x86
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x86
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SSDTBI_VS2012, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\ConfigurationFile.ini
Detailed results:
Feature: SQL Server Data Tools - Business Intelligence for Visual Studio 2012
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio Tools for Applications 2012
Component error code: 0x80044000
Component log file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\VSTA2012_LangsSupport_Cpu32_1.log
Error description: VS Shell 2012 installation has failed with exit code -2147205120.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3436.0&EvtType=VSTA2012_LangsSupport%40Install%400x-2147205120
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\SystemConfigurationCheck_Report.htm

What is the best skin for new Macbook Air 13"?

What is the best skin for new Macbook Air 13"?
I have a new Air and want to protect it from scratches and such.
Thanks in advance

Sorry, I don't like "skins". They inhibit the heat transfer necessary to keep your MBA cool. Get a soft or hard case to store it when not in use. I like Speck products.
Just take care of it. Battle scars make it uniquely yours.

I am trying to upgrade my macbook pro to os x mavericks, but it has been on the reboot process for more than 2 hours. There is only the apple logo with the spinning ball thing. What should I do?

I am trying to upgrade my macbook pro to os x mavericks， but it has been on the reboot process for more than 2 hours. There is only the apple logo with the spinning ball thing. What should I do?

Hi there Candyleehoiman,
I would recommend taking a look at the troubleshooting steps found in the article below.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
-Griff W.

Guidelines required to analyze the extraction process for 2LIS_02_SCL.

Hi All,
I have a problem here regarding the extraction process for the DataSource 2LIS_02_SCL. The values posted by date fields like
Posting Date (0PSTNG_DATE)
Schedule Line Delivery Date (0SCL_DELDAT)
Statistics Date (0STAT_DATE)
In BW are suspected to be wrong values.
So I am supposed to check the extraction process for PO Schedule Line (2LIS_02_SCL).
So how can I proceed with this analysis in BW side as well as in SAP R/3.
Can anyone please help with the process.
Thanks in advance.

Hi,
In Bw thre is always confusion about following Dates.
Posting Date (0PSTNG_DATE)
Schedule Line Delivery Date (0SCL_DELDAT)
Statistics Date (0STAT_DATE)
So ask Functional Consultants and Business USers and Identify the corretc Date in ECC and then Change the Mapping In UPdate Rules in BW. i.e. What date USer is wanting and accordingly we nee dtgo change the mapping in UPdate Rules in Time Char Tab in UpdateRules.
Thanks
Reddy

How to analyze the extraction process for 2LIS_02_SCL both in R/3 & BW.

Hi All,
I have a problem here regarding the extraction process for the DataSource 2LIS_02_SCL. The values posted by date fields like
Posting Date (0PSTNG_DATE)
Schedule Line Delivery Date (0SCL_DELDAT)
Statistics Date (0STAT_DATE)
In BW are suspected to be wrong values.
So I am supposed to check the extraction process for PO Schedule Line (2LIS_02_SCL).
So how can I proceed with this analysis in BW side as well as in SAP R/3.
Can anyone please help with the process.
Thanks in advance.

Hi,
In Bw thre is always confusion about following Dates.
Posting Date (0PSTNG_DATE)
Schedule Line Delivery Date (0SCL_DELDAT)
Statistics Date (0STAT_DATE)
So ask Functional Consultants and Business USers and Identify the corretc Date in ECC and then Change the Mapping In UPdate Rules in BW. i.e. What date USer is wanting and accordingly we nee dtgo change the mapping in UPdate Rules in Time Char Tab in UpdateRules.
Thanks
Reddy

I downloaded the new version of Mozilla and tried to install an add-on to allow me to set the home page for new tabs. The app says it has downloaded but does not open new tabs as my home page (google) - any suggestions what I can do?

I downloaded the new version of Mozilla and tried to install an add-on to allow me to set the home page for new tabs. The app says it has downloaded but does not open new tabs as my home page (google) - any suggestions what I can do?

I've been working on this all day!!! I've tried everything I know of and can't get it to load either. Sounds like lots of people are having problems. Here is what I have so far...I have uninstalled EVERYTHING on my pc from apple and reinstalled itunes to no avail. I have tried all sorts of things I've read as fixes online. NOTHING has worked. Here is something interesting that i have noticed though. my main pc (which is the one i have always managed my itunes account with for years) is a 32 bit system running windows 7. Yesterday I installed itunes for the first time on my new netbook which is a 64 bit (windows 7) system and it works just fine. i have three other laptops (all window 7) in my household that are all 64 bit operating systems and ALL have updated to 10.5 and THEY ALL work fine. this is FOUR 64 bit systems ALL updated w/10.5 that work and ONE that is a 32 bit that will not. Can't get any help from apple. their suppot *****! I want to get someone on the **** phone or a live chat but cant. *** APPLE????? please let mw know if you find SOMETHING i can try next. I'm out of ideas and patience!

What is the Learning Process for SAP Business ByDesign

Hi Experts,
What is the Learning Process for SAP Business ByDesign
Prashant Kapoor

HI prasanth,
SAP-ByD always updated day to day. you can find here:
https://my020062.sapbydesign.com/sap/ap/ui/repository/SAP_BYD_WEKTRA/CP/sapLSUIContentPlayerTestPage.html?manifest=067D03A7602B1D490899DF46B5082089&COMPONENT=A1S_PDI&RELEASE=260&LANGUAGE=en&REGION=&INDUSTRY=&TASK=CR_VIEW&sap-language=EN
Note: do u want open the above link u might have a .net framework4.0 bcz this one silverlight application.
Best Regards,
Harish.y

The parallel process for mrp.

hi exports
we plan to do the scope of planning for the total planning as a background job.
while doing that system ask for the parallal processing for mrp
what is customize step and procedure to do the parallel process for mrp.

Dear Raj,
With the help of parallel processing procedures, you can significantly improve the runtime of the total planning run.
To process in parallel, you can either select various sessions on the application server or various servers.
Parallel processing runs according to packages using the low-level code logic:
The work package, with a fixed number of materials that are internally defined in the program, is distributed over the individual servers/sessions. Once a server/session has finished processing a package, it starts processing the next package.
If a low-level code is being planned, the servers/sessions that have finished must wait until the last server/session has finished its package to avoid inconsistencies. Then the next low-level code is processed per packages.
The parallel processing procedure is switched on in the initial screen of total planning.
Activities
Define the application server with the number of sessions that can be used:
If you want to define various servers for parallel processing, enter the server with the number of sessions.
If you only want to use one server, but several sessions, enter the application server and the appropriate number of sessions.
Further notes
Parallel processing shortens the time required for calculation, however, it cannot shorten the database time as the system still only operates using one database.
The Customizing Transaction is OMIQ
Regards
PSV

How do I change the default zoom for New Tab only?

The New Tab zoom in Firefox 33 is too high to see all 12 of my thumbnails. I changed it using ctrl- but the next time I opened a New Tab, the zoom was back at 100%. How do I change the default zoom for New Tab only?

cor-el, what am I looking for in '''content-prefs.sqlite'''?

The worker process for application pool 'MSExchangeAutodiscoverAppPool' encountered an error

Hello Guys,
I am getting an event ID 2297 with the description given below.
The worker process for application pool 'MSExchangeAutodiscoverAppPool' encountered an error 'Cannot add duplicate collection entry of type 'add' with unique key attribute 'name' set to 'WSMan'
' trying to read global module configuration data from file '\\?\C:\inetpub\temp\apppools\MSExchangeAutodiscoverAppPool\MSExchangeAutodiscoverAppPool.config', line number '275'. Worker process startup aborted.
Could someone help me please to resolve this.
Thanks in Advance. :)
Regards Rishi Aggarwal

Hi,
Based on the error message, it seems the issue is related to that there is a duplicate entry in the file it mentioned.
I recommend you follow Amit’s suggestions to check result.
Best regards,
Belinda Ma
TechNet Community Support

How do I set the default zoom for new sheets to 150%?

I'm using the latest edition of Numbers and I'd like to set the default zoom for new sheets to be 150% when they are created rather than the default 100%. Does anybody know how to do this?
Thanks,
d.

Try Numbers menu > Preferences > Rulers >Default Zoom.

What is the passing mark for new BO Certification exams

Hi,
What is the passing percentage for new BO certifcation exam for Web Intelligence. Exam Code is C_BOWI_30.
Thanks,
CD

If you search on internet you will get your solution its 75%. try : http://www.forumtopics.com/busobj/viewtopic.php?p=741799

What is the right process for moving system to another plant

Dear Guru,
I have below scenario which i would like to understand what should be the right process to deal with it..
Organization Structure.
Company code: C500
Business area : 500A
Plant A500 and S500 which is under the same company code and same Business area.
Storage location: SW01 and AW01 which are physically same location address
I have this scenario where the user have a PO under Plant S500 which already GR and IR and the physical goods is currently placed in Storage location SW01.
But the user realized the Material should be created under Plant A500.
For the above case, can anyone please advice me what should be the better process instead of reversal the IV/GR/PO? and what is the right process for MM and considering also from the finance point of view?
Thank you very much,
Regards,
CheeWee

Hi
It is the configuration issue. SOmetime it happens when you copy the Reference plant to your Plant.
Change the setting and make it both Qty & Value if you really want to manage the stock qty with value then proceed.
Valuation area is nothing but a Plant.
karthik
Edited by: Karthik on Jul 25, 2011 1:23 PM

The QA process for new extension submission.

Similar Messages

Maybe you are looking for