" The query cannot use the cache

Hi , I am testing my query on RSRV and also running it using RSRT but neither RSRV is working and RSRV is throwing a error
" The query cannot use the cache"
How to resolve ?
Tried RSRCACHE and everything looks fine there.

Hi,
Thanks for your update.
for this new error try to Generate this query in RSRT.
GOTO -> RSRT -> GENERATE tab is there.
Try it and please update me back.
Thanks & Regards,
Vipin

Similar Messages

Error - The deployment cannot use the ReservedIP Name that belongs to a region.

hi experts,
I created a ReservedIP in North Central US. IF i deploy a project containing below config on anexisting Cloud
Service in North Central US it gives error.
<NetworkConfiguration>
    <AddressAssignments>
      <ReservedIPs>
        <ReservedIP name="name"/>
      </ReservedIPs>
    </AddressAssignments>
</NetworkConfiguration>
it is throwing this error after uploading to the portal
"The deployment cannot use the ReservedIP name that belongs to a region."
But then if i try creating a new cloud service from scratch and deploying it works fine. Can you let us know what might be the issue with the old cloud service. The old Cloud service also shows North Central US
With Regards,
Amit
With Regards, Amit

Hi,
As far as I know, the reserved IP is belong to azure IP space, You can enable all azure services to access your database (which whitelists the whole azure IP space, essentially), if you set azure service to true, I think it is unnecessary to set allow IP
address.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Why am I getting error "The deployment cannot use the VirtualNetwork MyProjectVN that belongs to a region."?

I have a Virtual Network configured in Azure with Site-2-Site VPN, it works fine and connects to our on premise VPN network.
I have a web role that I would like to deploy into this VN. I have two cloud configurations, DEV and TEST, both are deployed to their own designated cloud service instance.
Previously, only the DEV configuration was published to the VN, and it worked properly without any problems. However, today I also wanted to publish the TEST environment into the VN, but I get the error message "The deployment cannot use the VirtualNetwork
MyProjectVN that belongs to a region.".
What can be the reason for this? I didn't choose any regions when setting up the VN, and both cloud service instances are in the North Europe location.

Hi Mark,
Based on my research, I haven't found any related official documents indicate this kind of difference between Staging and Production. Accroding to the error message, you can create a virtual network within an affinity group to see if the issue persists.
In addition, since it is related to Web roles, you can also ask in the forum below for assistance:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=windowsazuredevelopment
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

TS3297 iTunes is stuck on classical genre with a bunch of code showing on the screen; cannot use the music bottom; on an IPhone 5

iTunes is stuck on classical genre; screen is showing a bunch of code and no songs

What does it say when you try to restore it? Is it an error code that it gives you or does it simply say the restore failed? The error code could help us figure out what is wrong with it, but in most cases something like this usually leads to needing to service the device (i.e. get a repair).

Infoset query - cannot use the currency translatioin

A query is built on an infoset(FIAR_SD01) whihc has been joined on the basis of Invoice number as the key.
AR and SD infoproviders are joined in an Infoset based on 0BILL_NUM.
in the report built on this Infoset, i need to show invoice Amount and AR amount per invoice. this amount is coming from the infoprovider in dcument currency and in the report it should be converted to USD. for this i'm usign the currency translation object - USD_VAR_DB- exchange rate based on DB with time ref characteristics as 0POSTNG_DATE.
if i use this/ any translation object it gives an error -'Cannot apply translation to the cube/infoprovider"
the reason is. in infoset, the object 0POSTNG_DATE is not retained as same but gets a new technical name like: FIAR_SD01__F8.
to create a new trasnlation object DB based is not feasible. because in time Ref tab of creating a new translation object, if i select "Exact day" and in the infoset selection FIAR_SD01 infoset doestno appear as 0CALDAY is not present in the DSO.
we need a solution for this.as to how do we do the currency translation.
is there any setting i have missed?

I know INfoset doesnt store data...
But in BI 7.0 its possible to load the data from INfoset to a data target...
Just right click on a cube, and say create transformation, you will get the option of infoset over there....
I am suggesting you to push data from Infoset to cube and then build the report on the cube...
Edited by: mansi dandavate on Aug 5, 2009 12:33 PM

How to find the query name using infoset name

Hi Experts
       Iam new to the sap queries(SQ01,SQ02), some queries already created.
      now i want to do some modification, my problem is i am not able to find the query name.
      I know the infoset name, can you tell me how to find the query name using the infoset name, is ther any table for this.
i tried in sq01 also, but its confusion, pls advice me on this.
thanks in advance.
regards
rajaram

Hi
try like this..
SQ02 --> go to --> Query Directory..
from there you can get all the queries belong to a Infoset.

I just lost my iPad, what should i do? and how to block that ipad so the thief cannot use my ipad

i just lost my ipad. somebody has stole the ipad on my office. i want to know:
1. what should i do to delete my account, email, application, video, photo, data, personnal information and all things that have downloaded in my ipad?
2. how to get all things above so i can restore to my new ipad?
3. how to block my stolen ipad so the thief cannot use the ipad?
please please answer all my question. very urgent. and for your any answer to help me i would say thanks.................................
TIPS first things have i should do for my stolen ipad:
- make police reporting
- send message and check ipad location on find my ipad/iphone (mobileme.com) follow all directions
- and remote lock or wipe ( but check and make sure that available to you to restore on new ipad before you wipe)
if there any else better than i did, please share....

Change your Apple password.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
 Cheers, Tom

Query - Cannot Retrieve the Data / Result Set

Hello,
I'm trying to query a cube through the OLAP connection using Java and every time I try to execute a query an exception is thrown stating "Cannot retrieve the data set" or "Cannot retrieve the result set" depending on how I'm doing the query. I've tried to execute the query both through the use of an IBIQuery and IBICommandProcessor object as well as directly through the IBIOlap connection via an MDX statement and both methods produce the same exception. If anyone can shed some light on why exception is being thrown it would be greatly appreciated.

please help me ... The question has nothing to do with 'getting' data from excel and certainly not with putting it into MySQL.
The stack trace specifically tells you that your connection string is wrong.
It also tells you which connection string is wrong.
Which you can use to determine specifically which one is wrong. And which you did not provide that info to us.

Cannot build the query or generate the report. WIS 30351

I am trying to create a docuemtn using SDK. I have created a document and when I try to add dataprovider and update the document, I am facing the below error
Cannot build the query or generate the report. WIS 30351
http://help.sap.com/saphelpiis_sbo41sp5wi-sdk/frameset.htm?ec5645bc6fdb101497906a7cb0e91070.html
Any help would be appreciated...

Hi Pirabu,
here's the required steps for what you described:
1. Create a new report in folder with ID 12345:
     POST ../raylight/v1/documents
     request body:
        <document>
        <name>My New Doc</name>
        <folderId>12345</folderId>
        </document>
      response:
        <success>
        <message>The resource of type "Document" with identifier "54321" has been successfully created.</message>
        <id>54321</id>
        </success>
2. use the new document ID when adding a data provider (ie universe ID is 5543)
      POST ../raylight/v1/documents/54321/dataproviders
      request body:
        <dataprovider>
        <name>Query 1</name>
        <dataSourceId>5543</dataSourceId>
        </dataprovider>
      response:
        <success>
        <message>The resource of type "Data provider" with identifier "DP0" has been successfully created.</message>
        <id>DP0</id>
        </success>
If you are doing something different, please provide the steps you are using and the type of datasource you are adding (unv, unx, Bex query etc).
Is the error when adding the data provider, or do you have an additional step updating the document?
Also, what version of BI4 are you working with?
Dan

Cannot build the query or generate the report - BI4.0 Dashboard on WebService Error

Hello All,
I am trying to create a Dashboard with WebService connections in SAP BI4.0 SP04. While running the dashboard I am receiving the error, Cannot build the query or generate the report. I have already set the refresh parameter to TRUE (bound to an excel cell and I have tried with 1 also). Back end WebI Reports of the BIWS connections are created from BEx queries through BICS connection. I have two prompts to run the Web Service and the report. Please share your thoughts regarding this.
Thanks and Regards,
Debajyoti Dan

Hi All,
I have found the issue. The problem is coming only when I am receiving prompts from BEx query and trying to use them through dashboard. I replaced these BEx prompts with the same in WebI report. Then the entire functionality started working correctly from dashboard.
But, this is only a work around and can not be applied at all times. So I have raised a message for the same to SAP. I will update the thread based on what I receive from SAP Support.

Multi Provider Changes - The Query cannot be executed

Hello,
I added a new characteristic to an existing multiprovider on which queries already exist.
I changed one of the existing queries adding that newly added characteristic.
Now the query cannot be executed. Please see the log...
I could successfully execute the query in RSRT....
Diagnosis
Characteristic 0BILL_TYPE is used in the Query Designer, but was deleted from the InfoProvider.
System response
The query cannot be executed.
Procedure
Characteristic 0BILL_TYPE is used in the query to be executed even though it was deleted from the InfoProvider. The problem can be solved by changing the query in the Query Designer. Here, you get a repair proposal, which removes the missing InfoObject from the query. Afterwards, check whether or not the query was defined correctly.
You can also delete the query.
Additional technical information:
IOBJNM = 0BILL_TYPE
ELTUID = Sell-In Qty
ELTTP = SEL
Notification Number BRAIN 407
Close
Any siggestions of how to adjust the multiprovider.
Thanks,
Vish

The check in query designer says that query is correct.
Only when I try to execute using the web it says that Char doesn't exist in infocube.
The query works fine in Analyzer & RSRT....I guess something got to do with the Browser or web..
Thanks,
Vish

The query cannot be released for OLE DB for OLAP

Hi,
I have created a SAP BI query by query designer,which includes a replacement path variable.Query is working totaly fine.
Now i want to use this query in SAP BO universe, so i have checked the query property Release for OLE DB for OLAP in Advance preoperty of query which allow external use of query.
But after this when i try to run the query its showing error messages-
The query cannot be released for OLE DB for OLAP
Query ZBO_OVERDUE_CUST could not be opened.
>> Row: 37 Inc: CONSTRUCTOR Prog: CL_RSR_OLAP_VAR
Error when generating dataProvider
If i remmove it,my query will work fine.But problem is here,i have to use both thing.
I want repleasement path in query,and because i have to use query in Universe,so i have so allow external use of query.
What should i do,how can i get my desire result.
Thanks,
Piyush

I think it may be a limitation due to some of the logic in the BEx query.
http://help.sap.com/saphelp_nw04/helpdata/en/1e/99ea3bd7896f58e10000000a11402f/content.htm
Release for OLE DB for OLAP
External reporting tools that communicate using the OLE DB for OLAP interface use queries as data sources. If you want to release this query as a data source for external Reporting tools, select Allow External Access to this Query.
Note: Queries containing formulas with the operators %RT, %CT, %GT, SUMRT, SUMCT, SUMGT, and LEAF cannot be released for OLE DB for OLAP. These operators are dependent on how the list is displayed in the BEx Analyzer and the formulas return unexpected values when using OLE DB for OLAP or MDX. You may be able to obtain the required result by selecting constants. For more information, see Selecting Constants.
For more information about using formula operators, see Defining Formulas.
For more information about OLE DB for OLAP, see Mapping Metadata.

GB won't open- This is what I get... Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser

Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser. Then I get this message...
Instrument Library Invalid
GarageBand Ecpects a valid instrument foledr in /Libraty/Application Support/GarageBand
Please choose a valid instrument Library folder or quit and re-install GB
Any solutions?

Is this a new installation of GarageBand or has it worked before on the same computer?
Or have you transferrred your GarageBand from a different computer?
The error message is saying, that your GarageBand installation is incomplete. There are essential foldrs missing in your system library.
Check, if indeed both folders are missing or if only the permissions are set incorrectly.
Your system library (the folder "System" directly on your system drive) should have the following folders inside the folder "Audio", and they need to be readable by the system and by administrators.
And in the folder /Library/Application Support there should be the Instrument Library.
If these folders do not exist (or no longer exist), restore them from your backup- If your GarageBand version is a new installation, the application may not hve been downloaded or installed completely, then reinstall GarageBand.
What is your GarageBAnd version, and how did you install it originally?
Regards
Léonie

My back button and refresh button and my yahoo tool bar are dimmed a lot when I open up firefox. So as a result, I cannot use the back button nor my refresh button AND my yahoo toolbar disappears a lot. I have tried to get on your chat session but it is a

<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [/forum/1/688252]
Thanks - c</blockquote>
== Issue
==
I have another kind of problem with Firefox
== Description
==
My back button and refresh button and my yahoo tool bar are dimmed a lot when I open up firefox. So as a result, I cannot use the back button nor my refresh button AND my yahoo toolbar disappears a lot. I have tried to get on your chat session but it is always closed. I need one on one help. Please reply with resolution.
== This happened
==
Every time Firefox opened
== two or three months ago
==
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 (BT-canvas) Firefox/3.6.3 GTB7.0 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdnu
*npdnupdater2
*Coupons, Inc. Coupon Printer DLL
*Coupons, Inc. Coupon Printer Plugin
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*6.0.12.448
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*BrowserPlus -- Improve your browser! -- http://browserplus.yahoo.com/
*Shockwave Flash 10.0 r45
*Yahoo Application State Plugin version 1.0.0.7
*3.0.50106.0
*My Web Search Plugin Stub for 32-bit Windows
*Google Updater pluginhttp://pack.google.com/
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Npdsplay dll

* If the menu bar is hidden then press and hold the Alt key down, that should make the Menu bar appear (Firefox 3.6 on Windows) (see [[Menu bar is missing]]).
* Make sure that you have the ''Navigation Toolbar'' and other toolbars visible: View > Toolbars .
* If items are missing then see if you can find them in the View > Toolbars > Customize window.
* If you see the item in the Customize window then drag it back from the Customize window to the Navigation toolbar.
* If you do not see that item then click the Restore Default Set button in the View > Toolbars > Customize window.
See also [[Back and forward or other toolbar buttons are missing]] and [[Navigation Toolbar items]]
See http://kb.mozillazine.org/Toolbar_customization

Hi. After I have loaded a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cut, for instance I cannot use Ctrl T to enter free transform mode. Also the toolbar is so small I cannot see the icons without ge

Hi. After loading a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cuts, for instance I cannot use Ctrl + T for free transform, how do I resolve this problem. In addition the tool Icons are so small I have to get close to the screen to see them, is there anyway the Icons can be made bigger without reducing the resolution of the screen.
Thanks
Derek

Are you working on a background layer? If so, Ctrl + T will not work. Press Alt and double-click your background layer to convert to a normal layer (or right-click BG layer and select Layer from Background) and try again.
If you're working in Photoshop CC 2014 you can go to Preferences > Experimental Features and tick "Scale UI 200% for high-density displays" to make your buttons and icons larger.

" The query cannot use the cache

Similar Messages

Maybe you are looking for