The Query Could not be saved due to a problem in Transport

Hi All,
we move the data from DEV to QAS but in the QAS when you are going to save as query giving this error
error: The Query Could not be saved due to a problem in Transport
can any one please tell me the solution for this
thanks
sidhartha

Sidharth,
When you create a transport request for queries in Transport connection, what is the grouping condition you have taken and also please be ensure that all the query elements have to be selected to transport that query.. Please check whether all the elements have been selected or not.. You can check this out in SE09 under your request.
Hope this helps...
****Assign Points****
Thanks,
Gattu

Similar Messages

The resource could not be saved due to unknown error

Hello,
After we installed the April 2015 CU on our Project 2010 farm, we have started to get the below error when we attempt to edit a Resource.
We did run the configuration wizard on both the app and WFE servers. Also, we are
not using any custom master page here.
So far below are the steps I have already tried and have not been successful.
Uncheck the 'Enable Dynamic content compression' and unchecked the 'Enable static content compression' as described in this
TechNet question. We did an IIS reset on all the App and WFE servers after making this change.
Confirmed that no services have stopped and that the service accounts have correct access level.
Everything else works in the PWA expect for this section. Has anyone else experienced this?
Thanks in advance for your response.

Hi Darogael,
Here is a similar thread which a bunch of advice. In particular try to edit and save the resource custom fields.
https://social.technet.microsoft.com/Forums/projectserver/en-US/638864dc-c085-4e93-b783-4dcea0f22f4e/edits-to-user-profiles-throwing-an-error-the-resource-could-not-be-saved-due-to-the-following
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

The document could not be saved. there was a problem reading this document (109)

Have Vista and get this error msg when trying to save Doc as pdf. Document created online as result of survey and opens fine, just cannot save it to a file folder for future access.

If not corrupt, it may be that security is set that does not allow changes. So in that case, adding names and such could not be saved.

Error: Query could not be saved due to problem in transport

Hi all,
This is the error msg i'm getting when i'm trying to save a new query. what could be the possible problem? And how should i go about solving it.
Thanks in Advance.
Mav.

Please check OSS Note 533413 and related notes 194051 and 337950.

Query could not be saved

Hi Experts!
I Created a Query.When i click save,iam getting a message..1. The query could not be saved due to a problem
            in transport.
         2. Bex transport request is not available or not
            suitable.
         3. choose an existing request.
Could the experts give me suggestions to steps has to be taken.Its a bit urgent.
Thanks in advance.
diya

dear Diya,
new query should have no problem with transport,
you may need to create a new bex request,
rsa1->transport connection->click button truck icon with bex, assign to package/development class,
'unfortunately' you may need to logout and login again bex analyzer.
and you aren't creating query directly in production server right ?
check the possible problem cause with oss note
194051-Transport problem when saving queries
Symptom
An error occurs when you save a query:
Error when saving
"The query could not be saved due to a problem in transport".
Other terms
Business Explorer, query, transport, save, R9 124
Reason and Prerequisites
There are 4 possible reasons for this problem:
1. The BEx default transport request or the development class-dependent transport request is not maintained or released in the Administrator Workbench.
2. The system is set to "cannot be changed". Refer to Note 337950 (as of 2.0b SP 11), which describes how query objects can be edited in systems that cannot be changed.
3. You are not authorized to write to Workbench requests.
4. The BEx default transport request or the development-class-dependent transport request in the Administrator Workbench has another target system than the query (the transport destination of the query is determined via the transport layer of the query's development class (as of 3.0: of the package)).
The error only occurs for query objects which already have a development class, that means, which were already placed on a transport request.
Solution
Solution for Cause 1:
a) Start the Administrator Workbench
b) Choose 'Goto' to change to Transport connection
c) Choose "Request BEx" or "BEx development classes" in the toolbar.
d) Create a (new) request.
e) All changes in the BEx are now written to this request.The end user is no longer confused by 'Transport' dialog boxes.
Solution for Cause 2:
See Note 337950
Solution for Cause 3:
Authorize user to write to Workbench requests.
Solution for Cause 4:
Create a request for each target system. Assign the request suiting the target system of the transport layer of the development class (of the package) to each development class (as of 3.0: to each package) used for BEX objects.
If this does not change the situation, further information is useful for error analysis.
Go to Transaktion SE16, Table RSZCOMPDIR. In field COMPID, select the technical name of your query. Read the COMPUID of your query.
Go to SE37, function module rso_elem_get_related. Parameter I_IOBJNM is set to the COMPUID, and parameter I_OBJVERS (object version) is set to A. Only the export parameters E_T_OBJ_EXISTENTIAL and E_T_OBJ_DEPENDENT are of interest.
These entries are then entered in function module rs_tr_objects_check_insert in import parameter I_T_TR_OBJECT. In this parameter, fill field PGMID fixed with 'R3TR' and field OBJECT fixed with 'ELEM'. Field OBJ_NAME is filled with the contents of field OBJNM from export parameters E_T_OBJ_EXISTENTIAL and E_T_OBJ_DEPENDENT. The other fields are not relevant.
The export parameters of this function module are required for further error determination. Add this information to your OSS message. The table of messages E_T_MSG is important in particular.
hope this helps.

Manage Users --Cannot Save, getting error "The resource could not be saved.... unknown error"

In Project Server 2010, in Server Settings > Manage Users we can't edit any existing users - no matter if we change something or not, as soon as we hit
the SAVE-Button, we get this error:
The resource could not be saved due to the following reasons:
An unknown error has occurred.
We have two custom Security Categories and Users Group. The Resources are synced with AD Groups every midnight. There are no Resource level Custom fields.
We were able to save it till few days, not sure what is the issue now.
How to find out and resolve this issue!
Any hint would be of great help.
Thanks.
Greema

Hi
Go to IISManager --> Select "SharePoint Web Access" --> Double click on Compression -->
2] Uncheck both "Enable Dynamic content compression" and "Enable static content compression" --> click on Apply.
3] Do the same steps for the site where PWA is present. Then try editing the user.

Error while saving interactive pdf form:The document could not be saved.

Hello,
Can anyone please help me here.
Not able to save the pdf form.
I have interactive form which contains static fields,text fields,Document digital signature and a submit button.
After filling and signing the form it will ask for saving the form.But saving is giving error.
Error : The document could not be saved.There was a error reading the document(26).
Can anyone please tell me why i am getting this error.
Thanks in advance,
Menaka.H.B

Hello,
Integrated into WD application means -> Interactive form generated in SFP transaction is used in abap webdynpro application.
Offline scenarion -> Since it is an interactive form, user will fill the form offline and submit it by email.From the webdyn pro appliaction user will download the form to the local desktop.Fills it offline and submits the form.
Now the interactive form generated directly from sfp tcode is working fine.I can fill the form,Sign it, save it and submit the form.
But the form downloaded from the WD application cannot be saved and is not allowing to dogitally sogn the form.
Its giving error The document could not be saved. there was a problem reading the document(26).
Thanks and Regards,
Menaka.H.B

"The file could not be read due to an error" Opens on one computer, displays this on another.

Hello,
I'm trying to troubleshoot several Illustrator files that won't open on desktops at my company's 2nd office. The files open fine on any desktop at my primary office. When opening the files from the 2nd office, it begins "Reading Illustrator file..." then the message "The file could not be read due to an error" is displayed and the file closes out.
Both offices have the same model desktop and are running:
Adobe Illustrator CS6 (up to date)
Windows 7 x64
Both desktops have the same system fonts and I've tried saving the files locally.
Thanks, Shaun

Hey Jacob and Monika,
Sorry if I wasn't clear, but I did already try saving the files to the hard disk.
"Both desktops have the same system fonts and I've tried saving the files locally."
My fix was copying the content of the files into new, blank .ai files. Those new files open from both offices now.
Still, I wish I could have identified the issue in case it happens again. The error message is vague and there isn't much info on the web about it.
Best, Shaun

I deleted iTunes when it said "iTunes could not back up iPhone because the backup could not be saved on the computer"and now it wont let me install it again and keeps saying "itunes cannot be installed because the file cannot be found in the cabinet "

iTunes told me to delete my backup folder when I was having problems syncing my phone to my computer. After that it wouldn't work at all. After trying and trying I deleted iTunes when it said "iTunes could not back up iPhone because the backup could not be saved on the computer"and now it wont let me install it again and keeps saying "itunes cannot be installed because the file cannot be found in the cabinet ". What the **** itunes? Nothing is working!!
I wanted to update my iTunes so I could sync my phone to my computer and update my phones software so I can use the latest apps that need a 4.2 or higher.
This is not fun for me so if anyone knows what I can do to fix this please help. Is it possible to download the "cabinent file" with the lastest iTunes?
Thank you.
-Kait
My phone is the iPhone4 and my computer is a Windows Vista

I doubt that corrupt files are the problem. It is more likely a space or permissions issue. Is the hard-drive on which iTunes is stored close to capacity? Do you (or the particular user profile you have logged on with) have the requisite permissions to save to that drive?
Otherwise, do you get an error code? This might point us in the right direction.

HT1766 At the end of a synch I am getting the following error message "iTunes could not back up the iPod because the backup could not be saved on the computer". Any ideas on how to resolve?

At the end of a synch I am getting the following error message "iTunes could not back up the iPod because the backup could not be saved on the computer". Any ideas on how to resolve?

See:
iOS: Troubleshooting backup issues in iTunes
Try going to iTunes>Preferences>Devices and delete the existing backup so iTunes creates an entire new one vice changing the existing one.

The document could not be saved. There was a problem reading this document (114).

After adding some sticky notes to a PDF in Adobe Reader i went to save it and it comes up with "The document could not be saved. There was a problem reading this document (114)." and will not let me save it. Please can you advise if there is anyway of saving this document with the sicky notes in?

The problem is most likely document corruption. Try to work on a new copy from the original source.

The document could not be saved. A file I/O error has occurred

Hello,
I have scanned PDF files varying in size from < 1,000 pages to > 5,000 pages. I seem to experience this issue on and off on various files regardless of the size. The issue is when I OCR the pdf using Adobe Acrobat X Pro, when it's completed the OCR process and I go to save it errors out with: "The document could not be saved. A file I/O error has occurred"
I have tried:
1. Saving to local hard drive
2. Saving to network drive
3. Renaming file and repeating steps 1&2
4. File/Save as and reducing (but it won't allow me to do so without saving first, lol)
Any thoughts? Thanks so much.
Phil
System specs:
Windows 7 Professional
16 gb RAM
500Gb Hard drive (409gb free)
Adobe Acrobat X Pro
Message was edited by: bldfb024 (system specs included at bottom)

No it is from a disk drive.
Robb Hanke
[signature deleted by host]

Error message "The document could not be saved. This file is already open" when trying to complete an electronic signature.

Running Adobe Acrobat Professional 10.1.0. I cannot upgrade to newer version because several applications were already tested on this version.
When trying to complete an electronic signature, my users receive the error message ""The document could not be saved. This file is already open". When they close and open the file again to try to sign again they find a corrupted electronic signature. Instead of a clean signature with the box colored in light blue they see their signature with the embedeed message Click Here to Verify & Sign with the box colored in grey.
We turned off antivirus in the Sharefolder where the forms are stored and nothing. We turned off the antivirus on the client and nothing. We stored the files in another server and nothing. One workaround is saving the file in the desktop, signing it, and then back to the Sharefolder. Another is saving the file with a different file name.
I've searched and the only similar thing was caused by the Windows Preview Pane. See Information Transmogrification: Adobe Acrobat saving a file does not work, displays “File may be read-only”. No luck with this one too.
Is definitively an intermittent problem. The users that experience the problem experience it intermittently.
This started to happen when we move our computers to Windows 7.
Any ideas?

Correction on Question:
This is a web application and the users need to be able to load the editable .pdf form from the website, edit it and submit it back to the website from within Internet Explorer.
Users began getting the error message:
'The document could not be saved. This file is already open.'
last Friday after having no problems prior to this. Some users can edit the editable .pdf forms on the website and save the file with the same name to the website. Some get the error mentioned in the subject.
We really need help getting this resolved.
Sandy Martin

When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?

When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?
I can login fine via this address.
http://[Server Address]:[Port Number]/ReaderExtensions
And I can apply the extension successfully, but when I attempt to download I receive the error above.
Application Alert" The file could not be saved. Are you sure you want to lose your results?

Please check the supported version of flash player on your client machine for LiveCycle : http://bit.ly/1wGD9t4
Upgrade or downgrade it accordingly.
Thanks,
Wasil

When I try to save a doc to my server I sometimes get this: The document could not be saved. There was a Macintosh system error (-5000). What does it mean?

When I try to save a doc to my server I sometimes get this: The document could not be saved. There was a Macintosh system error (-5000). What does it mean?

What kind of file are you saving, and what sort of clientserver setup do you have?
If you're using MS Office, it doesn't play nice with OS X Server, particularly with network homes.

The Query Could not be saved due to a problem in Transport

Similar Messages

Maybe you are looking for