The query screens are case sensitive I want to remove the case sensitivity

The current query screens are case sensitive ,I want to remove the case sensitivity is there a setting somewhere to remove this or how else can this be done.
Example:In the restrict value range of the query screen.If we give for a particular field anything in capital letters/small it should take.
Please let me know ASAP
Thanks

Hi pavan,
generally case sensivity is related to InfoObject Master Data.
Take a look via Tcode RSD1 to the master data of your InfoObject and check in first screen if flag for capitol letters has been marked.
If this is the situation it is a problem, because MAster Data in cube have been saved as different if are written like "Letter" or "LETTER".
Ciao.
Riccardo.
Message was edited by:
        Riccardo Venturini

Similar Messages

  • I updated my first generation iPad to version 5.1.1 and won't go past the setup screen that asks if I want to use the iPad locator. I can go back but can't get any further.

    I updated my first generation iPad to version 5.1.1 and won't go past the setup screen that asks if I want to use the iPad locator. I can go back but can't get any further

    I just updated my original iPad 32 GB WiFi to iOS 5.1 about fifteen minutes ago.  But I did it with the system restore feature in iTunes.  So it wiped out everything on my iPad.  But it did work.  Then I restored an earlier backup and all went fine.  Maybe you could try backing up your iPad and then using Restore to get it back to factory settings to see what happens. 

  • I have an original iPhone running version 2.2.1.  I wish to get rid of the phone, but before discarding it I want to remove the email records, phone book information, and photos.  I would like to leave the other apps in place.  Any suggestions?

    I have an original iPhone running version 2.2.1.  I wish to get rid of the phone, but before discarding it I want to remove the email records, phone book information, and photos.  I would like to leave the other apps in place.  Any suggestions?

    Delete you mail account on the phone and disable to sync your mail account in the info pane in iTunes with your phone connected, same for contacts. Also deselect photo syncing in the photo pane. After the following sync, your mail, contact and photos should be gone.
    Photos inside the camera roll have to be deleted on the phone.
    Remember, that apps only can be used with the account they were bought with. If the phone will be set up with a different iTunes account, all of your apps will be removed.
    Message was edited by: Ingo2711

  • Unable to delete an album. This message appears "are you sure you want to delete the album"

    When deleting an album on iphoto I must have hit the wrong key and I got the following message:
    Are you sure you want to delete the album “/Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/2013/03/18/20130318-131925/IMG_0920.MOV /Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/2013/03/21/20130321-224355/M4H00026.MP4 /Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/2013/03/18/20130318-131925/IMG_0929.MOV /Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/2013/03/18/20130318-131925/IMG_0930.MOV /Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/2013/03/18/20130318-131925/IMG_0932.MOV /Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/2013/03/18/20130318-131925/IMG_0935.MOV /Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/2013/03/18/20130318-131925/IMG_0936.MOV /Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/2013/03/18/20130318-131925/IMG_0937.MOV /Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/2013/03/18/20130318-131925/IMG_0938.MOV /Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/
    And It is not giving any option to click anywhere. I can't close or quit iphoto. PLEASE HELP!!

    That does not look like an iPhoto command, much more like a Finder one.
    Use the Force Quit command. It's under the Apple Menu.

  • I want to remove the credit on my account.

    I want to remove the credit on my account.

    If you want to remove the balance from your account and you can't spend it then you can try contacting iTunes Support (these are user-to-user forums) and ask them if they can remove it : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • When I try to sync photos, I followed all the steps, picked one folder.  When I hit "apply" I get this error message: Are you sure you want to remove 30 apps from iPad.  This will delete these apps and their data from the iPad. What have I done wrong

    When I try to sync photos or music, I followed all the steps, picked onle folder, not the whole library.  When I hit "apply" I got this message:
    Are you sure you want to remove 30 apps from iPad.  This will delete these apps and their data from the iPad" What can I change to just download the photos and not interfere with the apps?
    (By the way, the memory is not even one quarter full)
    Thanks for your help - Pat

    I have the same problem.  I updated my mac to 10.5, which then had me update apps like itunes, etc. then it wanted me to sync my purchased music to my ipad before i updated the ipad...which worked ok. then when i was syncing the photos i got the same message when i hit "apply" asking are you sure you want to delete the 12 apps from the ipad -  clicked "no" and brought me back to the original screen. Got the same message when trying to move them from the hard drive to the ipad.  WHat is going on and how do I correct this? Thanks

  • I used "my documents" for the profile folder, I removed the profile and firefox asked if i want to remove its file, and it took ALL my file except a few, all my photographs etc, are these now unrecoverable? as they are not in the recycle bin

    I used "my documents" for the profile folder, I removed the profile and firefox asked if i want to remove its file, and it took ALL my file except a few, all my photographs etc, are these now unrecoverable? as they are not in the recycle bin
    disaster, thanks firefox 1 year of photos lost

    Thanks for the obvious question. I mean it. The very same thought came to me this morning and, sure enough, I had booted into another drive--my old one that, of course, had the old desktop, etc.
    It didn't dawn on me that this was the case since I hadn't set it as a boot drive but I guess in the course of all the restarts I did, it got switched.
    I'm back to normal again.

  • I have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

    i have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

    From what I can see, unless you're doing things with old versions of Xcode on a Mac (in which case, the solution seems to be to upgrade to the latest version), this seems to e an iTunes issue.
    Accepting that it works fine with another iPad, I suggest trying the following:
    1. Restart the non-working iPad
    2. If that doesn't work, reinstall iTunes. If you're on a Windows PC, I suggest using Control Panel to uninstall all the Apple apps, restarting the PC, and doing a fresh install. If you're using a Mac, a repair permissions might help too.
    iTunes 10.3 is now available, and that may make a difference.

  • Are you sure you want to change the extension from... BLOCKS Finder Editing

    This is weird and is driving me nuts, but some Macs do not allow further Finder editing of file or folder names if I change their names (usually including numbers, dots and so on) in such a way that I receive the warning:
    Are you sure you want to change the extension from..?
    After I confirm that I want to change the name, the Finder does it but gets locked for editing (I can do other things) and does not allow any further file or folder editing until I force quit of Finder or reboot the Mac.
    I have found that if right after confirming that I want to change the name I select the file and hit return (which selects its name), no problem arises. But I must do it in one or two seconds, or else it will be too late.
    IN SUMMARY:
    1. Change file or folder name including numbers and dots at the end.
    2. Get the message "Are you sure you want to change the extension from..."
    3. Confirm that I want to change the name.
    4. FROM NOW ON, I CANNOT CHANGE THE NAME OF ANY FILE OR FOLDER UNTIL I FORCE FINDER QUIT. Unless of course I do the trick indicated above real quick!
    Any hint? Any way to know what is going on? This could be a bug of Mac OS X 10.4.x or earlier or a problem with a third party application. But how to know what is going on to prevent it? As said, some Macs show this issue, but not others.
    Note: some related issues on this section searching for:
    Finder Loses Keyboard Input
    or
    Sure change extension
    For instance:
    http://discussions.apple.com/thread.jspa?messageID=1974048
    http://discussions.apple.com/thread.jspa?messageID=1466505
    Hint: some file or folder name changes are more prone to cause the issue than others. For instance, renaming a folder (and confirming it) as:
    Testing.r00
    brings the bug 100% of the times.
    Any idea of what is going on? Thanks.

    The message is a warning that you are doing something that the OS thinks is going to possibly cause a problem. You are creating the situation and the OS is doing nothing other than what you are asking it to do.
    I don't know any exact answer why you can't access your files, but I do know that there are a few characters and things that will cause problems because they mimic names of invisible files. When you make a name that is close to being the same it can treat the file as the special one... meaning you can only access it via Terminal.
    Ones you cannot use at all: the colon (:), slash (/), single or double period as first characters. (taken from Finder Help with a naming files search) It is best to stay away from any special characters as a rule. Also avoid using a period and 3 character suffix unless it is one that you are purposefully assigning so the file belongs to an application.
    That said... even with the over 200 applications on my system I couldn't repeat your Testing.r00 problem. So, I don't know if it may be application related or not.

  • In the initial screen of  ME21 transaction i want a user exit

    In the initial screen of  ME21 transaction i want a user exit
    which can popup a message once document type is given and press enter.

    hey guys try with Function exit EXIT_SAPMM06E_006
    and implement ZXM06U36.
    thanks guys i my self found the solution

  • Are you sure you want to open the application

    I get asked "+Are you sure you want to open the application+" when I open htm files e-mailed to me.
    Does anyone know to stop this?
    It never used to happen with older versions of Safari and Mail.

    baltwo,
    thanks again for your response.
    I have changed that setting a few times with various other changes in different combinations. I rebooted but have not tried repairing permissions yet, will do so in next few days and will let you know result.
    Thanks again for your assistance.

  • The display of sub screen exceeds the sub screen area

    Hi Experts,
      I have a requirement, that i need to make changes to one of the screens in the standard transaction. I found there is a screen exit exist for this. This screen is called in the tab strip(In the standard transaction). I have done the screen changes in the sub screen. When calling the standard transaction this sub screen exceeds the sub screen area of the standard transaction tab strip. I know if the sub screen size is more than the sub screen area then scroll bars will be displayed automatically. But i am facing a strange problem that the display of sub screen exceeds the sub screen area. I need scrol bar instead of exceeding the sub screen.
      Please help me to solve this problem
    Regards,
    Bujji

    Anyone has any suggestions for my question. Any help is much appreciated. Thanks.

  • Whenever I open firefox a add ons screen comes up with the yahoo web page behind it. . I just want the Yahoo web page and do not want to close the add ons page every time I use my computer.

    Whenever I open firefox a add ons screen comes up with the yahoo web page behind it. . I just want the Yahoo web page and do not want to close the add ons page every time I use my computer.
    I don't know what else to say about this. It is a screen that comes up in its own window everytime I open Firefox

    Please check your home page setting and see if about:addons is listed. If it is, please remove it
    https://support.mozilla.com/en-US/kb/How+to+set+the+home+page

  • How do I stop click-thru "'Firefox' is an application downloaded from the Internet. Are you sure you want to open it?"?

    Every single time I launch Firefox 20 under Mac OS X 10.7.5 I get the click-thru warning message "'Firefox' is an application downloaded from the Internet. Are you sure you want to open it?". How do I stop this? There are internet postings and previous postings about solving this using Terminal commands for OS X 10.5.x & 10.6.x, but these commands do NOT work in 10.7.x or 10.8.x. This seems to be a Firefox ONLY issue, and solving it by globally turning off OS X security features as recommended before in a previously closed thread seems like a really BAD solution. Is there a "Firefox only" solution, or will I just have to stop using Firefox?

    I had upgraded to Firefox 20 using the automatic update process, so the last time I'd downloaded a .dmg and manually installed Firefox was a long time ago. I trashed Firefox 20, downloaded a new .dmg and manually transferred to Applications folder and this persistent message ended. I assume if I'd ever launched from the open .dmg the same error message would result, so the fix offered was a solution even though the cause was something different since I only used the automatic update process and never manually handled Firefox .dmg downloads.

  • "........" is an application which was downloaded from the Internet. Are you sure you want to open it?

    I get the following warning every time I try to open a recently download application. I'm running Mavericks 10.9.3
    "xxxxx' is an application which was downloaded from the Internet. Are you sure you want to open it?
    How do I disable this warning for a particular application?
    Update: problem solved. The Mac in question has multiple users, but only one user has administrator privileges. The problem was simply that the application in question had never been opened by the administrator. Once the administrator opened the application the warning went away.

    If using a mouse, you can right click on the application installer this will give you an "Open with" popup and you can chooes to open the application installer using the standard installer.
    Another method to do the same exact thing is to hold the Control key while left clicking on the Application installer will give you the exact same popup menu.

Maybe you are looking for

  • How do I get a picture to stay when I move and scale it for my home screen?

    How do I get a picture to stay when I move and scale it for my home screen?

  • Better client than sqlplus for bulk fetch testing .

    Hi, I'm doing some test with rows speed retriving via Net8 and need some better client than sqlplus itself . There is araysize limit of 5000 in sqlplus and its not oriented for massive row fetching , although Im using set termout off . Test are in 10

  • CLOB data import problem from 9.2 to 10.2

    Hello, I am exporting data from 9.2 to 10.2 with exp/imp utility. I have one table with datatypes NUMBER,VARCHAR2,CLOB,DATE,CHAR. CLOB is having xml data. while importing into 10.2, import failed with the messages IMP-00058: ORACLE error 1461 encount

  • Use RS_TABLE_LIST_CREATE

    Hi abbapers, I want to use the FM RS_TABLE_LIST_CREATE: CALL FUNCTION 'RS_TABLE_LIST_CREATE'          EXPORTING               table_name         = 'BKPF'     *         ACTION             = 'ANZE'     *         WITHOUT_SUBMIT     = ' '     *         G

  • Program setting problems

    How do i get programs to not automatically open when i power on my laptop? I tried system preference > General and unchecked the box "Restore windows when quitting and re-opening" that didnt work.