The question about date

business scenario:
1, there is a project   : A
2, the first layer WBS: A
   the secongd layer WBS: A1, A2
   the third layer WBS: A11,A12, B21, B22,
   the fourth layer WBS: A111 A112 A121 A122 B211 B212 B221 B222 B223
3, Activity assigned to WBS:
now: the same layer WBS's time don't overlap.
        and the father WBS's time cover the son WBS's time
        and the Activity's time is entirely in the assgined WBS's time.
Please explain me all the steps to be required.
Thanks in advance!

Hi,
Iam clarifying which i understood from ur question.
You can use topdown Planing or bottom up planning.
In Top down > All activites and the assigned WBS Elelemnts are with in the basic dates of the project defination.
In Bottomup > It will consider all activites and assigned WBS Elelements and will give the basic start and finish date of the project.
Goto Project Defination >control data tab > schdeluing scnario and select the way you required and test it.
Regards
Narayan

Similar Messages

I want to ask the question about phasor measurement.

I want to ask the question about phasor measurement.the first one is that how can I accomplish the sychronized sampling with GPS?The other question is that how can I adjust the sampling rate for DAQ when the system frequency alter continuously.(if I used the DFT,due to the altering of frequency,I can't get the completed waveform)"

Synchronising DAQ with GPS depends on the DAQ sampling rate. If the rate is higher than 2 Hz you can sample the 1PPS pulse of your GPS receiver together with your data.
You change the sampling rate with the AI Clock Config.vi. You cannot do this on the fly so you must stop DAQ with AI Control.vi reconfigure the sampling rate and then start it again.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Hi, I have answered no to the question about saving password for one spesific site. I have changed my mind and would like Firefox to save the password. How do I reactivate the password saver for one spesific site?

Hi, I have answered no to the question about saving password for one spesific site. I have changed my mind and would like Firefox to save the password. How do I reactivate the password saver for one spesific site?

Check exception list of your Firefox password Manager and check if your site is there or not?
* http://kb.mozillazine.org/User_name_and_password_not_remembered#Password_Manager_settings

HT5312 In itune I need to fill up the questions about card but i dont have credit card,what can i do?

In itunes i need to fill up the questions about card but i dont have a credit card, what can i do about that?

Hi Huyen1110,
You can use the steps in this article to create an iTunes Store account that does not use a credit or debit card for payment -
Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

I have a question about Data Rates.

Hello All.
This is a bit of a noob question I'm sure. I don't think I really understand Data Rates and how it applies to Motion... therefore I'm not even sure what kind of questions to ask. I've been reading up online and thought I would ask some questions here. Thanks to all in advance.
I've never really worried about Data Rates until now. I am creating an Apple Motion piece with about 15 different video clips in it. And 1/2 of them have alpha channels.
What exactly is Data Rate? Is it the rate in which video clip data is read (in bits/second) from the Disc and placed into my screen? In Motion- is the Data Rate for video only? What if the clip has audio? If a HDD is simply a plastic disc with a dye read by "1" laser... how come my computer can pull "2" files off the disc at the same time? Is that what data transfer is all about? Is that were RAM comes into play?
I have crunched my clips as much as I can. They are short clips (10-15seconds each). I've compressed them with the Animation codec to preserve the Alpha channel and sized them proportionally smaller (320x240). This dropped their data rate significantly. I've also taken out any audio that was associated with them.
Is data rate what is slowing my system down?
The data rates are all under 2MBs. Some are as low as 230Kbs. They were MUCH higher. However, my animation still plays VERY slowly.
I'm running a 3GigRam Powerbook Pro 2.33GHz.
I store all my media on a 1TB GRaid Firewire 800 drive. However for portability I'm using a USB 2 smartdisk external drive. I think the speed is 5200rpm.
I'm guessing this all plays into the speed at which motion can function.
If I total my data rate transfer I get somewhere in the vicinity of 11MBs/second. Is that what motion needs for it to play smoothly a 11MBs/second data connection? USB 2.0 is like what 480Mbs/second. So there is no way it's going to play quickly. What if I played it from my hard drive? What is the data rate of my internal HDD?
I guess my overall question is.
#1. Is my thinking correct on all of these topics? Do my bits, bytes and megs make sense. Is my thought process correct?
#2. Barring getting a new machine or buying new hardware. What can I do to speed up this workflow? Working with 15 different video clips is bogging Motion down and becoming frustrating to work with. Even if only 3-4 of the clips are up at a time it bogs things down. Especially if I throw on a glow effect or something.
Any help is greatly appreciated.
-Fraky

Data rate DOES make a difference, but I'd say your real problem has more to do with the fact that you're working on a Powerbook. Motion's real time capabilities derive from the capability of the video card. Not the processor. Some cards do better than others, but laptops are not even recommended for running Motion.
To improve your workflow on a laptop will be limited, but there are a few things that you can try.
Make sure that thumbnails and previews are turned off.
Make sure that you are operating in Draft Mode.
Lower the display resolution to half, or quarter.
Don't expect to be getting real time playback. Treat it more like After Effects.
Compressing your clips into smaller Animations does help because it lowers the data rate, but you're still dealing with the animation codec which is a high data rate codec. Unfortunately, it sounds necessary in your case because you're dealing with alpha channels.
The data rate comes into play with your setup trying to play through your USB drive. USB drives are never recommended for editing or Motion work. Their throughput is not consistent enough for video work. a small FW drive would be better, though your real problem as I said is the Powerbook.
If you must work on the powerbook, then don't expect real-time playback. Instead, build your animation, step through it, and do RAM previews to view sections in real time.
I hope this helps.
Andy

The question about the sharepoint server 2010 install

Hi Friends,
i have a question about the sharepoint server 2010 install.
my computer is used the windows server 2008 service pack 1. in order to install the sharepoint 2010 server, i need to choose to windows server 2008 service pack 2. my question is when i install the windows server 2008 service pack 2,whether the inside
of my computer information will be lost or change?
thank you in advance.
Qearl

Hi ,
No data will be lost either from your Windows program files or other drives as long as it is an upgrade.
After upgrade you will still be able to see your old program files under windows.ol folder in the C: Drive of the new OS.
The data will be lost only when you perform a clean install like complete formatting the HArd disk and installing from scratch.
As mentioned it always good to maintain a backup preferable important files in a skydrive as there is a good chance of external drives crashing.

The question about portlet customization and synchronization

I have a question about portlet customization and synchronization.
When I call
NameValuePersonalizationObject data = (NameValuePersonalizationObject) PortletRendererUtil.getEditData(portletRenderRequest);
portletRenderRequest.setPortletTitle(str);
portletRenderRequest.putString(aKey, aValue);
PortletRendererUtil.submitEditData(portletRenderRequest, data);
Should I make any synchronization myself (use "synchronized" blocks or something else) or this procedure is made thread-safe on the level of the Portal API?

HI Dimitry,
I dont think you have to synchronize the block. i guess the code is synchronized internally.
regards,
Harsha

Some questions about data traffic

Hi Guys,
I live in Kong Kong and have an iphone 3g at the latest version 2.2. I am on a 3 HK plan and all is well when I am in Hong Kong. My work pays for all my phone costs and up until now there has not been any issues. The problem is that I travel a lot with my work to many countries in Asia and some in Europe and when I am there, most times I wait until I have access to a wireless network to get my emails, or as I always carry with me an airport express, I wait until I am in the hotel room and set up my wireless network and away I go. The problem is sometimes I need to get my emails and so I turn on data roaming and download my emails. I have the account set to manual pull and so I can monitor the data that I donwload. The current problem is that the IT department has flagged my increased costs when roaming compared to my colleagues who roam with a blackberry and in some cases it is 10 times the cost. For example, for 3 days in China last month, my bill was about 1000HKd which equates to about 10MB of data. My colleague who was there at the same time with a blackberry who would have a similar amount of emails had a cost of about 90HKd which equates to about 900b of data.
I decided to check today and so reset my data usage monitor and downloaded 9 emails of normal size, no pictures just text and it came to 406KB. Surely this cannot be correct. If it is, and this is my question, is there anywhere that I can limit the amount of data that is downloaded for each email and is there anywhere I can set the emails downloaded for work to be text only and not HTML. My work email is syncing using activesync with my work exchange server.
If I cannot find a way to overcome this, I will either have to stop using data roaming when I am abroad or I will have to take back my blackberry and start using it again which is not what I want at all.
I love the iPhone and actually my IT Manager does not want me to have to use the blackberry and cannot believe it is so data intensive.
Any help from you fellow iPhone lovers would be much appreciated.
Thanks,
Paul

I don't know about your question 1 and 2. Seems like it could be a workout that wasn't ended or just a glitch.
What was your goal? It will measure whatever you set it to measure. Calories burned, distance, run more often, etc.
I set a run more often goal of at least 3 times in 16 weeks. It is averaging and making a calculated guess from that average as to when those runs would take place. So if I run three days in a row and not again that week, I will be ahead of my goal, and then the system catches up and I'm on target again.
I imagine it's doing the same for your goal.

Question about Dates in Project View

I usually have no problems when it comes to date metadata, changing dates if need be, batch changes, etc... But this is something that is confusing me and I haven't been able to solve it.
My wife found one of her old PAS digital cameras, and it had images on the card. I decided to import them for her into Aperture, but it was immediately apparent to me that the date and times were off. The time zone was fine, so I imported the images using a card reader, adding the appropriate metadata of my choosing. After importing the images, I proceeded to change the date and time to the correct dates and times. This worked fine as well, only in Project view, the project doesn't fall into the right place. I have my projects organized into folders, and have them set to Date - Oldest First. The photos from this import show as today's date when I scroll over the image preview box and the project is organized as the last project, which is consistent with that date. The metadata shows that the file date is the date that I set it to be (which in this case would make it the oldest project in the folder). Nothing I do changes anything.
I then decided that maybe it had something to do with importing the images via a card reader instead of off of the Camera directly, so I decided to import straight from the camera. This time, the project is organized as the oldest project, but when I scroll over the Project preview box, the date that shows up is the original incorrect date, not the new date that I changed the photos to. The new date would still make the images the oldest project.
I really just want the dates to match up, and I can't imagine why the Projects preview is showing me one date when the metadata (and my own knowledge of the situation) is telling me that it should be showing a different date. When I made the adjustments to the date and time, I also applied the changes to the Master file.
Does anyone know what is going on here, why Aperture has a problem with something like this and if there is anyway to fix the problem?
Much obliged,
Mac

Update:
I just solved the issue, but I don't know why it should work like this, nor why this should happen.
Basically, the first time that I imported the images, I imported them separately as groups of photos so that I could import them each into individual new projects. I noticed that the first project I created had the right information both in the metadata and in the project pane. This being the case, I decided to import everything again, only this time I imported everything at the same time into one project and called the project, "Test" (this is arbitrary and has nothing to do with the solution).
Next I batch changed the date and time of all of the images in this "Test" project. Once that was done, I separated the images out into their own projects. This time everything showed up and was organized correctly.
Again, I don't know why it had to be done this way, but apparently once I imported the first time, that was the only time that the metadata was accurately recorded. The subsequent imports off of the same card were not recorded properly. Again, I have no idea why, nor what to do about that, but my data is correct now and this seems to have solved the issue.
If anyone has anything to say about the topic, please chime in.
Thanks,
Mac

The question about parameter in ECC 6.0 system.

hi
T-code RZ10 , I checked the parameters about DEFAULT.
but there are one error and three Warns.
---one error
     there is [E:j2ee/dbname changes not permitted]   below the parameter of j2ee/dbname.
     PS: the background is red.
---three warns
     j2ee/scs/host
     W: Unknown parameter j2ee/scs/host , a check cannot be performed
     j2ee/scs/system
     W: Unknown parameter j2ee/scs/system , a check cannot be performed
     j2ee/ms/port
     W: Unknown parameter j2ee/ms/port , a check cannot be performed
     PS: the three parameters are not in T-code RZ11.
could you help me solution these question.
thanks and regards

hi,MIchael
   ---one error
        there is E:j2ee/dbname changes not permitted below the parameter of j2ee/dbname.
        solution:
                  the value of j2ee/dbname was BS2.   just now, i deleted the value of j2ee/dbname.
                 the error message does not come out,now.
   ---three warns
       j2ee/scs/host
       j2ee/scs/system
      j2ee/ms/port
    solution:
              there is not the scs in the system. but there is the ms in system.
              why they are specified , i dont konw.
              if those parameter doesn't exist, would i be going to delete those parameter.
    thanks and regards.
    chu

The question about EDI in scenario 'Cross-Company Code Sales Processing'?

I'm doing the exercise with IDES system for the scenario 'Cross-Company Code Sales Processing'.
But when posting the EDI, it gave me the error as followings:
there are related data in table EDPP1, including customer and vendor data, but it still informed me the questions.
pls help!
Object 0090033869
Output type: tst IV for MM by ken
Processing log for program RSNASTED routine EDI_PROCESSING
EDI: Partner profile not available
EDI: Partner profile not available
    Message no. E0332
Diagnosis
    A partner profile could not be found with the following key:
    /0000000000/LI/
    This involves the key fields of the table EDPP1:
    -PARNUM partner number
    -PARTYP partner type
Procedure
    Please check the EDI partner profiles.
    Execute function

Hi
Partner profile is not seems to be maintained in tcode WE20.
Please maintain in WE20.
Kind Regards
sandeep

The question about vlan,acl of SWR224P

i find a strange thing.when i configure vlan,i find i can not write the english word in the "VLAN Name "
if i do,when i reboot this machine,the configration about vlan will bo lost??????????so,is there anybody can tell
me why.....
another problem,when i configure the ip acl,for example, Source IP Address1.1.0.0 Wildcard Mask0.0.7.255
destination any ,protocal any
but it tell me the date is wrong.so is the format i configure wrong.
thank you........body

hi,
I also tried to configure VLAN for my switch, you may check on this link on how to create VLAN. This link is for SRW224G4P but it might work on your SRW224P
http://kb.linksys.com/16824;
Another thing to consider is the fimware of your switch, check the version of the firmware and if it's a lower version you may update it.
Regarding your second inquiry about ACL, you may try to reconfiguring your ACL again once you updated the firmware.

The question about the callbackdata parameter in the function PostDeferredCallToThread()

I find if using a local variable to pass to the PostDeferredCallToThread(), then in the callback function, it cannot be recevied correctly. But as NI document said, this variable is a user-defined, will avoid declaring the data object as a global variable. how to interpret the question?
David

If you provide a pointer to the function the variable pointed by the pointer must be still in memory if you want to access it from that thread function.
One way of keeping the variable "alive" when you leave the scope of a function is to define it as static.
Dynamically allocated memory (malloc/calloc) is also accessible if not freed.
Suggested reading:
http://gribblelab.org/CBootcamp/7_Memory_Stack_vs_Heap.html
S. Eren BALCI
www.aselsan.com.tr

Answers of the questions about verification ID? I can't remembered!

I can't remember the answers of questions about verification Id and now I can't down more music.

Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

About to leave to Cancun Mexico (yay!) - questions about data/wi-fi

Hey all!
I'm about to go on my first international trip with my beloved iPhone. I know the hotel has free Wi-Fi down there, and I'd love to be able to use the phone for email checking and other data stuff - but I don't want any surprises with international data fees up the wazoo or anything.
If I don't plan on sending text messages or make calls but just use the wi-fi features while down there - what should I do? Any setting I need to be careful with etc?
Any advice highly appreciated!
// martin

You should be Ok to go down there as is. A couple things you can do.
Are you just going to use the iPhone for WiFi and nothing else?
If so you have the possibility of removing the SIM card to ensure it hits no Cell Towers and transmits data. But of course it means the SIM card should be stored in a safe spot and not lost.
But we also have a feature that turns Data roaming OFF to help assist with Data Roaming charges.
When abroad, turning off Data Roaming may avoid roaming charges when using email, web browsing, and other data services.
By default it is off. But to check. Go to Settings- General- Network and on the bottom is Data Roaming which should be off.
You can also consult AT&T and see if they got a cheap international data coverage plan you can be put on for the time you will be in Mexico.
I am sure our posters here can advise other ideas as well. Have a great vacation

The question about date

Similar Messages

Maybe you are looking for