The question about livecache installing with MaxDB in HP-UX 11i

hi,
I am try to install the livecache system for several days.But I am really not sure the exactly process after I read the document all about livecache across the ServiceMarket.I wanna confirm the step that I think about as follow describe by expert:
first of all,we install the OS system and configure environment variant according to install guide.
second one,Should I install MaxDB before run SAPinst? Cause the documemts don't describe when we should install the MaxDB.
finally,Running SAPinst for install the livecache system.
Is that process I thought all right?
Other issue about installing of MaxDB,I saw the sap help that said the MaxDB can be setuped by graphical interface tools named Installation Manager.But when I execute the SDBSETUP ,the system prompt "cannot load wxWidgets properly:Can't locate loadable object for module Wx in @INC (@INC contains:/SAP_DB/76_REL/hpia64/genopt/sys/wrk/fast/install/local/lib ./sapinstall/MAXDBHPUXIA64BUILD35/RDBMS_MAXDB_7.6.00_Build_35/MAXDB_HPUX_IA64) at SDB::common::Require.pm line 114 etc.
What's that possible to meaning.
Thanks in advance.

Hello Rong,
1> Please refer to this link for documentation on installing Livecache
https://websmp206.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000065738&
2> You need to install the OS first and then using SAPINST you can install Livecache.
Beofre installing LC, you need to make sure all FS required for Livecache, user ids, including use sdb and group sdba are created.
You can also use SDBINST from the Livecache CD
Livecache 7.6 CD
LC_HPUX_PARISC/SDBINST
existing component groups:
0: Server + Client
1: Client
2: Custom
3: none
please enter component group id:
Select 0 or 1 as appropriate
3> The error message refers to Itanium server and seems like a mismatch. Please verify you have the correct version for the OS of the machine on which Livecache is being installed.
Thanks
Lata Panjabi

Similar Messages

I want to ask the question about phasor measurement.

I want to ask the question about phasor measurement.the first one is that how can I accomplish the sychronized sampling with GPS?The other question is that how can I adjust the sampling rate for DAQ when the system frequency alter continuously.(if I used the DFT,due to the altering of frequency,I can't get the completed waveform)"

Synchronising DAQ with GPS depends on the DAQ sampling rate. If the rate is higher than 2 Hz you can sample the 1PPS pulse of your GPS receiver together with your data.
You change the sampling rate with the AI Clock Config.vi. You cannot do this on the fly so you must stop DAQ with AI Control.vi reconfigure the sampling rate and then start it again.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

I forgot my iCloud password also the questions that were associated with the account please is there anyway to resolve this

i forgot my iCloud password and the questions that were associated with the account is there any way to resolve this

No one here can help you.
Contact Apple.

Hi, I have answered no to the question about saving password for one spesific site. I have changed my mind and would like Firefox to save the password. How do I reactivate the password saver for one spesific site?

Hi, I have answered no to the question about saving password for one spesific site. I have changed my mind and would like Firefox to save the password. How do I reactivate the password saver for one spesific site?

Check exception list of your Firefox password Manager and check if your site is there or not?
* http://kb.mozillazine.org/User_name_and_password_not_remembered#Password_Manager_settings

HT5312 In itune I need to fill up the questions about card but i dont have credit card,what can i do?

In itunes i need to fill up the questions about card but i dont have a credit card, what can i do about that?

Hi Huyen1110,
You can use the steps in this article to create an iTunes Store account that does not use a credit or debit card for payment -
Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

I cannot update the apps that came installed with my MacBook Air

When Software Update says I have apps to update, it will not let ne update the ones that came installed with my macbook air, OS 10.8.2. App stare says to login as the user who originally purchased, yet I am logged in as that user. Have tried loggin out and back in but that does not work. Any ideas?

Hello ,
Thanks for using Apple Support Communities.
To reinstall the iWork applications that came with your computer, simply follow the directions below to get them back.
Mac App Store
Open Mac App Store.
Click Purchases at the top of the window. Your purchased apps will appear.
Click Install or Download.
Download past purchases
Take care,
Alex H.

Our Client gave a requirement to mass update the additional attributes in Install base for instances in Release 11i.

Hi,
Our Client gave a requirement to mass update the additional attributes in Install base for instances in Release 11i.
So I tried the below code to update:
But getting the error:
The Object Version Number passed does not match with the one existing in Installed Base tables.
Can any one please help how to fix it.
Code:
declare
x_instance_rec CSI_DATASTRUCTURES_PUB.INSTANCE_REC;
p_ext_attrib_values CSI_DATASTRUCTURES_PUB.EXTEND_ATTRIB_VALUES_TBL;
p_party_tbl CSI_DATASTRUCTURES_PUB.PARTY_TBL;
p_account_tbl CSI_DATASTRUCTURES_PUB.PARTY_ACCOUNT_TBL;
p_pricing_attrib_tbl CSI_DATASTRUCTURES_PUB.PRICING_ATTRIBS_TBL;
p_org_assignments_tbl CSI_DATASTRUCTURES_PUB.ORGANIZATION_UNITS_TBL;
p_asset_assignment_tbl CSI_DATASTRUCTURES_PUB.INSTANCE_ASSET_TBL;
p_txn_rec CSI_DATASTRUCTURES_PUB.TRANSACTION_REC;
x_instance_id_lst CSI_DATASTRUCTURES_PUB.ID_TBL;
x_return_status VARCHAR2(2000);
x_msg_count NUMBER;
x_msg_data VARCHAR2(2000);
x_msg_index_out NUMBER;
t_output VARCHAR2(2000);
t_msg_dummy NUMBER;
p_validation_level NUMBER;
p_commit VARCHAR2 (5);
p_init_msg_lst VARCHAR2 (500);
cursor stg_tab_cur is select instance_id,Safety_line_type from gewind_ib_iea_values;
TYPE stg_tab IS TABLE OF gewind_ib_iea_values%ROWTYPE INDEX BY BINARY_INTEGER;
stg_tab_var stg_tab;
stg_tab_bin_int BINARY_INTEGER;
BEGIN
x_instance_rec.instance_id := FND_API.G_MISS_NUM;
x_instance_rec.object_version_number := FND_API.G_MISS_NUM;
p_txn_rec.transaction_id := FND_API.G_MISS_NUM;
p_txn_rec.transaction_date := SYSDATE;
p_txn_rec.source_transaction_date := SYSDATE;
p_txn_rec.transaction_type_id := 1;
stg_tab_bin_int :=0;
For gewind_ib_iea_values in stg_tab_cur LOOP
stg_tab_bin_int := stg_tab_bin_int + 1;
P_ext_attrib_values(stg_tab_bin_int).instance_id :=gewind_ib_iea_values.instance_id;
P_ext_attrib_values(stg_tab_bin_int).attribute_id := 10023;
P_ext_attrib_values(stg_tab_bin_int).attribute_value := gewind_ib_iea_values.Safety_line_type;
dbms_output.put_line(P_ext_attrib_values(stg_tab_bin_int).instance_id);
dbms_output.put_line(P_ext_attrib_values(stg_tab_bin_int).attribute_value);
csi_item_instance_pub.update_item_instance(
1.0,
p_commit,
p_init_msg_lst,
1,
x_instance_rec,
p_ext_attrib_values,
p_party_tbl,
p_account_tbl,
p_pricing_attrib_tbl,
p_org_assignments_tbl,
p_asset_assignment_tbl,
p_txn_rec, x_instance_id_lst,
x_return_status,
x_msg_count,
x_msg_data);
commit;
-- Output the results
if x_msg_count > 0 then
for j in 1 .. x_msg_count
loop
fnd_msg_pub.get ( j , FND_API.G_FALSE , x_msg_data , t_msg_dummy );
t_output := ( 'Msg' || To_Char ( j ) || ': ' || x_msg_data );
dbms_output.put_line ( SubStr ( t_output , 1 , 255 ) );
end loop;
end if;
dbms_output.put_line('x_return_status = '||x_return_status);
dbms_output.put_line('x_msg_count = '||TO_CHAR(x_msg_count));
dbms_output.put_line('x_msg_data = '||x_msg_data);
COMMIT;
end loop;
END;
Regards,
Ravichander

This question is Assumed Answered -- It would be great if you could share the solution with us.
Thanks,
Hussein

The question about the sharepoint server 2010 install

Hi Friends,
i have a question about the sharepoint server 2010 install.
my computer is used the windows server 2008 service pack 1. in order to install the sharepoint 2010 server, i need to choose to windows server 2008 service pack 2. my question is when i install the windows server 2008 service pack 2,whether the inside
of my computer information will be lost or change?
thank you in advance.
Qearl

Hi ,
No data will be lost either from your Windows program files or other drives as long as it is an upgrade.
After upgrade you will still be able to see your old program files under windows.ol folder in the C: Drive of the new OS.
The data will be lost only when you perform a clean install like complete formatting the HArd disk and installing from scratch.
As mentioned it always good to maintain a backup preferable important files in a skydrive as there is a good chance of external drives crashing.

A question about a method with generic bounded type parameter

Hello everybody,
Sorry, if I ask a question which seems basic, but
I'm new to generic types. My problem is about a method
with a bounded type parameter. Consider the following
situation:
abstract class A{     }
class B extends A{     }
abstract class C
     public abstract <T extends A> T someMethod();
public class Test extends C
     public <T extends A> T someMethod()
          return new B();
}What I want to do inside the method someMethod in the class Test, is to
return an instance of the class B.
Normally, I'm supposed to be able to do that, because an instance of
B is also an instance of A (because B extends A).
However I cannot compile this program, and here is the error message:
Test.java:16: incompatible types
found   : B
required: T
                return new B();
                       ^
1 errorany idea?
many thanks,

Hello again,
First of all, thank you very much for all the answers. After I posted the comment, I worked on the program
and I understood that in fact, as spoon_ says the only returned value can be null.
I'm agree that I asked you a very strange (and a bit stupid) question. Actually, during recent months,
I have been working with cryptography API Core in Java. I understood that there are classes and
interfaces for defining keys and key factories specification, such as KeySpec (interface) and
KeyFactorySpi (abstract class). I wanted to have some experience with these classes in order to
understand them better. So I created a class implementing the interface KeySpec, following by a
corresponding Key subclass (with some XOR algorithm that I defined myself) and everything was
compiled (JDK 1.6) and worked perfectly. Except that, when I wanted to implement a factory spi
for my classes, I saw for the first time this strange method header:
protected abstract <T extends KeySpec> T engineGetKeySpec
(Key key, Class<T> keySpec) throws InvalidKeySpecExceptionThat's why yesterday, I gave you a similar example with the classes A, B, ...
in order to not to open a complicated security discussion but just to explain the ambiguous
part for me, that is, the use of T generic parameter.
The abstract class KeyFactorySpi was defined by Sun Microsystem, in order to give to security
providers, the possibility to implement cryptography services and algorithms according to a given
RFC (or whatever technical document). The methods in this class are invoked inside the
KeyFactory class (If you have installed the JDK sources provided by Sun, You can
verify this, by looking the source code of the KeyFactory class.) So here the T parameter is a
key specification, that is, a class that implements the interface KeySpec and this class is often
defined by the provider and not Sun.
stefan.schulz wrote:
>
If you define the method to return some bound T that extends A, you cannot
return a B, because T would be declared externally at invocation time.
The definition of T as is does not make sense at all.>
He is absolutely right about that, but the problem is, as I said, here we are
talking about the implementation and not the invocation. The implementation is done
by the provider whereas the invocation is done by Sun in the class KeyFactory.
So there are completely separated.
Therefore I wonder, how a provider can finally impelment this method??
Besides, dannyyates wrote
>
Find whoever wrote the signature and shoot them. Then rewrite their code.
Actually, before you shoot them, ask them what they were trying to achieve that
is different from my first suggestion!
>
As I said, I didn't choose this method header and I'm completely agree
with your suggestion, the following method header will do the job very well
protected abstract KeySpec engineGetKeySpec (Key key, KeySpec key_spec)
throws InvalidKeySpecException and personally I don't see any interest in using a generic bounded parameter T
in this method header definition.
Once agin, thanks a lot for the answers.

Questions about tiger install

hello,
i am wondering if some nice person could help answer a few questions and walk me through this process. i am a final cut pro editor and recently very naively upgraded the OS (to 10.3.9) and quicktime (from 6.5.3 to 7.0.3) on my g4 tower. i've since read that you should never upgrade mid-project because you never know what kinds of weird things will happen to your system, but i did not know this at the time.
so these upgrades have pretty much wreaked havoc with my fiinal cut - log and capture no longer works at al in fcp, i have a deadline, and the situation is a disaster. i've spent 20+ hours troubleshooting already, doing every fix i can find online for this apparently known bug. but nothing seems to work (i've reinstalled quicktime every way imaginable, downgraded back to 6.5, reinstalled final cut, thrown away quicktime receipts). nothing helps.
so now i want to try reinstalling the whole OS. but - the bad news is that i don't actually have an installer disk for panther. my g4 came with os 10.2, and i've lost the panther disk i used to upgrade. and panther is no longer on sale anyway.
so here is my first question: i also have a laptop, an ibook g4 that came with tiger. can i use the OS on the laptop installer disk to get tiger onto my g4 tower? or will that not work. or is there some other migration-type process i could use to get the OS from my laptop to the tower?
next, i know there is all this stuff about the correct way to upgrade the OS - backing everything up first, then wiping clean your drive, then doing a fresh install of the OS. i'm a bit confused about this process. i used carbon copy cloner to make a backup copy of all the stuff on my internal drive, but am not sure what to do next - do i just erase the drive now? then what? if the tiger installer from the laptop works and i get tiger installed, then how do i move back all the stuff that i've backed up (without overwriting the new OS)?
hope someone can explain all of this to me - i'm a big confused. thanks!

First, you cannot use the Tiger installer that came with your laptop to install on the tower. Although it may work (or may not because OEM versions are most often machine-specific) it constitutes a violation of the license agreement to install on more than one CPU at a time.
Second, you say you used Carbon Copy Cloner to make a bootable backup of the tower. I assume the backup is of the system that was working before you upgraded to 10.3.9. If so, you may be in luck. If this backup is on a bootable Firewire drive, then you should boot the tower from the Firewire drive with the cloned backup. Then use Disk Utility to erase the internal hard drive and use Carbon Copy Cloner to restore the backup to the internal drive. Of course be sure that you have set the CCC preference option on for Make Bootable.

Question about Logon ticket with user mapping at BI-JAVA environment

We're implementing BI 7.0 including BI Java and SAP EP for end user
access.
I have two question about SSO method when we're using BI Java.
I know we can simply configure SSO logon ticket with BI-Java(EP
included) and BI-ABAP through BI template installer and we already
succeeded in that case.
But the problem is we want to change it to user mapping SSO method for
some our internal reason.
After we configure user mapping SSO, we've got SSO failed error when we
call BI-Java stuff like BEx Web Application iView.
After many testing implemented, we found SSO Logon ticket with user
mapping (using SAP reference system). It seems working now.
But our question is "Is it no problem when we use SSO logon ticket with
user mapping?" Is there any restriction or issue?
One more question is we can ONLY use user base mapping when reference
system used. How can we assign BI-ABAP users to EP Group?

Using an SAP Reference system is allright. But if the reason u r going for this is because of different usernames in EP and BI, why dont you go for user mapping.
Anyways, on restriction of reference syetms is that you can have ONLY ONE reference system defined in portal. In you case you can only have the BI system defined.
Hope this helps!!

Questions about PDF exporting with InDe CS5.5

Hey all,
A couple questions about exporting to PDF from the latest version of InDe.
First, I have noticed that it seems to take a lot longer to get to a PDF. Any suggestions for how to speed up the process? It took 8 minutes or so to generate a low-res PDF (for print) of a 24pp document with a few placed images and vector graphics. Wow, that's a long time to wait, especially for a proof.
Second, the background task... if I get it going on making that 8-minute PDF and then work some more on the document, what exactly is in the PDF? Usually I save before making a PDF or printing. So, is the last version saved what will be in the PDF?
(As an aside, this ability to work on the doc while generating a PDF seems kind of weird. Generally one makes a PDF for proofing, or even for printing, when all the changes have been made and everything is "final". So, I see no benefit to being able to work on my document while it's making a PDF, as I'm probably finished making revisions for the time being. I have to say that I kind of like the progress bar you get when you make an interactive PDF, as you know you can't work on the document when that's on the screen... )
Thanks as always.

First, I have noticed that it seems to take a lot longer to get to a PDF. Any suggestions for how to speed up the process? It took 8 minutes or so to generate a low-res PDF (for print) of a 24pp document with a few placed images and vector graphics. Wow, that's a long time to wait, especially for a proof.
Yes, this is abnormally long (and too long), something is wrong. What's the full version of InDesign you are running, as reported by holding down Cmd or Control and selecting About InDesign?
Second, the background task... if I get it going on making that 8-minute PDF and then work some more on the document, what exactly is in the PDF? Usually I save before making a PDF or printing. So, is the last version saved what will be in the PDF?
Saving is not related. InDesign makes a database snapshot of your document the moment you begin the PDF export, and makes the export relative to that snapshot, regardless of edits you continue to make during the export process, and regardless of saving. Of course saving first is a good idea, for several reasons, not the least of which it sounds like something's fairly seriously wrong with your document or your InDesign installation.
We recommend you trash your preferences and export your document to IDML and see if either of those things changes this 8-minute behavior...err, assuming you're running 7.5.2.318.
(As an aside, this ability to work on the doc while generating a PDF seems kind of weird. Generally one makes a PDF for proofing, or even for printing, when all the changes have been made and everything is "final". So, I see no benefit to being able to work on my document while it's making a PDF, as I'm probably finished making revisions for the time being. I have to say that I kind of like the progress bar you get when you make an interactive PDF, as you know you can't work on the document when that's on the screen... )
Yeah, I think the primary benefit is if you are likely to work on 2 or more files in parallel, so you can finish A and export A and then switch to B. If you'd like a dialog box to pop up when export is done, check out my exportPop script from this post: ANN: automatic dialog after background export (exportPop.jsx.

Questions about supporting TLF with Halo components in Flex 4.1

We recently decided to upgrade to the Flex 4.1 SDK after a year or so at 3.2. We have been asked to not use the new SPARK components yet because our products would then have a mistmatch of Halo and Spark components in the UI. We have built support for our Halo components to display html through the ".htmlText" property for the Text components. For example, we can display strings such as "<p>Choose <b>one</b> option:</p>". With the upgrade to Flex 4.1 a couple of questions about supporting bi-directional text have come up. My understanding is that in order to support bi-directional text we need to use the Text Layout Framework. Does anyone have a suggestion on how we can utilize the TLF with the Halo components in Flex 4.1? Can we still use the ".htmlText" property somehow or is there a new property that understands the TextFormat markup? We would love to still be able to use the limited html tags that are supported for the "htmlText" property. Is there an option where that syntax is still understood?
Thanks in advance!
David

The halo components use TextField, and the spark components use TLF. Both sets have support for some html markup to import and export text. To use bidi text, you have to use TLF; TextField won't work properly.
It is possible to use TLF to build your own components, and this can work well particularly for applications with specialized needs. But if you need bidi support for advanced components like DataGrid and List, then you should use the spark components.
Thanks!
- robin

A few questions about using PS3 with 27" iMac display...

Hey people, I had a few questions about how I could possibly get my ps3 connected to the iMac's 27" screen. First of all, could you guys list some adapters that would be able to convert the HDMI to Mini displayport? That would be great. The only one I know of is that Dr. Bott Digital Video link.
Okay secondly, I was wondering if I do get the the ps3 connected with the iMac's display with an adapter to convert HDMI to mini DisplayPort, would it be in HD? Would I be able to play ps3 games or watch blu-ray movies in 1080p HD format?
Thanks!

Welcome to the Apple Discussions!
This has been asked a number of times here since the intro of the 27" iMac. The answer is very expensive US$149 or more converters and sometimes even more expensive to maintain the resolutions that you seek.
http://lowendmac.com/ed/bashur/09db/dvi-to-mini-displayport.html
Dah•veed

How to inform the kernel about newly installed STREAMS MODULE?

I made a copy of timod and installed the copy to /kernel/strmod
as a new module (newmod). I modified the t_open.c to make
it to use the "newmod" instead of the timod. The result of the
test is "Invalid Argument". It looks like the kernel doesn't
recognize the module "newmod". I looked throught Sun
Docs, I'm not able to find any instruction for how to
make kernel to recognize my new STREAMS module name
as the add_drv does for device drivers. Can anyone point
me to the right docs and give me some instructions for informing
the kernel about the newly installed STREAMS module?
Thanks
Yuen

Forget my precedent post, here is what's on the configuration page of this module :
("[_]" are checkboxe)
1/ [_] Check this option if your users' DNs look like cn=jdoe,ou=Group1,cn=example,cn=com and Group1 turns out to be the group you want.)
Attribute of the DN which contains the group name:
[Single line text field to enter attribute]
(The name of the attribute which contains the group name. In the example above, it would be ou, as the DN contains the string ou=Group1 and Group1 happens to be the desired group name.
2/ [_] Groups are specified by LDAP attributes
Attribute names (one per line):
[Multi-lines text field]
(If the groups are stored in the user entries, along with the rest of their data, then enter here a list of attributes which may contain them.)
3/ [_] Groups exist as LDAP entries where a multivalued attribute contains the members' CNs
Nodes containing groups (one per line):
[Multi-lines text field]
(Enter here a list of nodes from where groups should be searched for. The module will look them up recursively from the given nodes.)
Attribute holding group members:
[Single line text field]
(Name of the multivalued attribute which holds the CNs of group members, for example: memberUid)
If someone could tell me which checkboxe I should select and what to put into fields it would be king as I really have no idea of what to enter and what to select.

The question about livecache installing with MaxDB in HP-UX 11i

Similar Messages

Maybe you are looking for