The question about using LSMW to input data to IT2001.

Dear all,
My client have a system where employee make eform to absence so I have shcedule is uploading these absence data on IT2001. I have been created an LSMW for uploading absence data, I check all step these haven't any error but on the finish step when I Run Batch Input Session , the system just open screen on PA30 with infortype ="2001" and subtype="0100" of data and OK-Code=INS, the system wasn't open the detail on IT2001 so system show mess that "Processing of batch input session complated" but data not input on table PA2001.
Please help me correct this. What's step that is wrong?
Thanks for your supports.
Huyen Nguyen.

Dear Sheetal,
I'm sure, the system haven't open the detail on IT2001 and system show mess that "Processing of batch input session completed" but data not input on table PA2001.
I have checked all step these haven't any error and on the finish step when I Run Batch Input Session , the system just open screen on PA30 with infortype ="2001" and subtype of data and OK-Code=INS .
Please help me correct this.
Huyen Nguyen.

Similar Messages

  • Getting error while uploading gl master data using LSMW batch input data

    Hi Experts,
    I am getting error while uploading the GL master data through lsmw using batch input recording.
    After completion of all steps at the time of running batch input session error i am getting is "maintain EN language discription"
    and Pls tell me is it possible to upload transactional data using lsmw? if yes pls explaing briefly.

    Hello,
    Kindly post in the FI forum to get a better response.
    Regarding the issue you might check whether the correct column is being picked up where you have maintained the description.
    Kind Regards // Shaubhik

  • Problem about House Number of Vender Transfer by using LSMW+Batch-Input

    Hi,
    anyone has met the same problem?
    by using LSMW+Batch-Input method to transfer vender data the field House Number cannot be added.
    Object: 0040 Vendor Master
    Method 0002 Shared
    Program Name RFBIKR00
    Program Type B Batch Input
    Thanks in advance!

    in Vedndor master LSMW batch input method there is no field for House Number , we have only one filed
    (STRAS)for street and house numner in LSMW.
    first create the vendors after that update through XK02
    for this you can write program small LSMW recording  method
    using below fileds
    LIFNR                          C(010)    Vendor
    BUKRS                          C(004)    Company Code
    STREET                         C(060)    STREET
    HOUSE_NUM1                     C(010)    HOUSE_NUM1

  • I have a question about using multiple ipads in our school.  Each of our teachers have a iPad and AppleTV in their classroom.  The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher

    I have a question about using multiple ipads in our school.  Each of our teachers have a iPad and AppleTV in their classroom.  The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher #1 iPad to its AppleTV without effecting/projecting onto the adjacent teachers #2 classroom AppleTV?

    Not as such.
    Give the AppleTV units unique names and also enable Airplay password in settings with unique passwords for each teacher.
    AC

  • Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

     

    Make sure that your bean is implementing the serializable interface and that
    you are accessing the bean from the session with the same name.
    Bryan
    "Sandeep Suri" <[email protected]> wrote in message
    news:[email protected]..
    Hi, I have quick question about use of USEBEAN tag in SP2. When I
    specify a scope of SESSION for the java bean, it does not keep the
    values that I set for variable in the bean persistent.Thanks,Sonny
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!

  • Where Would be the best category to ask a question about using dashboard?

    Where Would be the best category to ask a question about using dashboard?

    However, don't ask it in this topic. Create a new topic for the question with a title describing that you are looking for Dashboard help.

  • I want to ask the question about phasor measurement.

    I want to ask the question about phasor measurement.the first one is that how can I accomplish the sychronized sampling with GPS?The other question is that how can I adjust the sampling rate for DAQ when the system frequency alter continuously.(if I used the DFT,due to the altering of frequency,I can't get the completed waveform)"

    Synchronising DAQ with GPS depends on the DAQ sampling rate. If the rate is higher than 2 Hz you can sample the 1PPS pulse of your GPS receiver together with your data.
    You change the sampling rate with the AI Clock Config.vi. You cannot do this on the fly so you must stop DAQ with AI Control.vi reconfigure the sampling rate and then start it again.
    Waldemar
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions

  • Problem while Creating BOM using LSMW Direct Input

    Hi  all ,
    I am trying to create the BOM Using LSMW Direct Input Method .
    I am getting problem at step 9 that is Read Data.
    It is able to read the values from header and item files .
    but it is not able to write , so the Written is 0 always .
    I put the field names first in the flat file and correcponding values below it with tab delimited.
    Please let me know where the Problem would be.... I am trying this from long time ..
    Regards ,
    Raj

    hi ,
    Yes i am specify files i am attaching 2 files .
    ones is header and the other is line item data .
    my strucure is :
    Hi ,
    I am still getting problem while for writing the records after reading the data .....
    my header structure :
    STYPE
    MATNR
    WERKS
    SELAL
    STLAN
    DATUV
    ZTEXT
    my item structure :
    STYPE
    MATNR
    WERKS
    SELAL
    POSTP
    MENGE
    my header data :
    STYPE     MATNR     WERKS     SELAL     STLAN     DATUV     ZTEXT
    1     388     0110     20     1     06.01.2009     SAMPLE ZTEXT     
    my item data :
    STYPE     MATNR1     WERKS     SELAL     POSTP     MENGE
    1     388     0110     20     N     1234
    1     382     0110     20     N     12345
    Above text files are delimited by tabulator.
    Please guide me . The files are reading but unable to write .....
    Regards,
    Raj

  • Question about Using PAPI Web Service in PowerBuilder 9

    Hi, all.
    I Have a simple question about using papiws in power builder 9.
    In pb9, I created a new Web Service Proxy Wizard and I input a url for papiws(ex. http://seraphpernote:7001/papiws/PapiWebService) and click next.
    But I couldn't get any Service List.
    In Eclipse, I used this url for using papiws well.
    Does anybody know about this case??
    help me plz.

    IIRC you must activate PAPI-WS for the engine. In Studio you do it by right-clicking on the project, then "engine preferences". In enterprise/standalone you must activate PAPI-WS in the Admin Center.

  • Upload sales text for material master using LSMW direct input method

    Hello Experts,
    I was trying to upload sales text for a material master using LSMW direct input method.
    I followed the following steps for the same
    Tab dlimited Text file format
    MATNR           LONGTEXT                                                     LINE       
    MATERIAL1    LONGTEXT FOR MATERIAL MATERIAL1       1
    Step1 -> Maintain object attributes
    Object -> 0001
    Method-> 0001
    Program name -> /SAPDMC/SAP_LSMW_IMPORT_TEXTS
    Program type -> D
    Step2 -> Maintain Source Structure
    Source structure -> LONG_TEXT            Source structure for long text
    Step 3-> Maintain souce file
    Source Fields
    ZLONG_TEXT             Source structure for long text
                           MATNR                         C(018)    MATNR
                           LTEXT                          C(132)    LTEXT
    Step 4-> Maintain structure relationship
    Structure Relations
    /SAPDMC/LTXTH Long Texts: Header                                           <<<< ZLONG_TEXT Source structure for long text
                  Select Target Structure /SAPDMC/LTXTH .
    /SAPDMC/LTXTL Long Texts: Row                                              <<<< ZLONG_TEXT Source structure for long text
                 Select Target Structure /SAPDMC/LTXTL .
    Step 5-> Maintain Field mapping and conversion rules
    Here i have assigned constan rules to couple of them like
    /SAPDMC/LTXTH                  Long Texts: Header
    Fields
       OBJECT                Texts: Application Object
                                    Rule :   Constant
                                    Code:    /SAPDMC/LTXTH-OBJECT = 'MVKE'.
       NAME                  Name
                                    Source:  ZLONG_TEXT-MATNR (MATNR)
                                    Rule :   Transfer (MOVE)
                                    Code:    /SAPDMC/LTXTH-NAME = ZLONG_TEXT-MATNR.
       ID                         Text ID
                                    Rule :   Constant
                                    Code:    /SAPDMC/LTXTH-ID = '0001'.
       SPRAS                 Language Key
                                    Rule :   Constant
                                    Code:    /SAPDMC/LTXTH-SPRAS = 'E'.
    /SAPDMC/LTXTL                  Long Texts: Row
      Fields
        TEXTFORMAT     Tag column
                                    Rule :   Constant
                                    Code:    /SAPDMC/LTXTL-TEXTFORMAT = '/'.
        TEXTLINE             Text Line
                                    Source:  ZLONG_TEXT-LTEXT (LTEXT)
                                    Rule :   Transfer (MOVE)
                                    Code:    /SAPDMC/LTXTL-TEXTLINE = ZLONG_TEXT-LTEXT.
    Step6 -> Specify file
    Legacy Data          On the PC (Frontend)
                 Data                           D:\Sales_Longtext.txt
    Step7 -> Assign File
    ZLONG_TEXT Source structure for long text
                  Data D:\Sales_Longtext.txt
    Step8 -> Read data
    Output result
    Source Structure             Read      Written        Not Written
    ZLONG_TEXT              1                1              0
    Transactions Read:            1
    Records Read:                   1
    Transactions Written:         1
    Records Written:                 1
    Step 8 -> Display read data
    Field Name                    Field Text Field Value
    MATNR                          MATNR      MATERIA1
    LTEXT                            LTEXT      SALES TEXT FOR Material MATERIAL1
    Step 9 -> Convert data
    File Read:          ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.read
    File Written:       ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
    Transactions Read:                 1
    Records Read:                        1
    Transactions Written:              1
    Records Written:                     2
    Step 10 -> Display converted data
    1 /SAPDMC/LTXTH                   1MVKE      MATERIAL1                                                                   0001E
    2 /SAPDMC/LTXTL                   2/ SALES TEXT FOR Material MATERIAL1
    Step 11 -> Start direct input program
    Output result for the same
    Legacy System Migration Workbench
    Project:                              ZNRD_PRJ1       ORH
    Subproject:                        ZNRD_SUBPRJ2    Upload long text
    Object:                               ZNRD_LTEXT      Long text tru direct input
    File :                                   ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
    Long Texts in Total:                                1
    Successfully Transferred Long Texts:  1
    Non-Transferred Long Texts:                 0
    Now when i check the material master sales view -> sales text it is empty.
    Please help me with the same.
    Regards,
    Ranjith N

    Hello Experts, I was trying to upload sales text for a material master using LSMW direct input method.
    I followed the following steps for the same
    Tab dlimited Text file format
    MATNR             LONGTEXT                                              LINE
    MATERIAL1     LONGTEXT FOR MATERIAL MATERIAL1 1 *************************************************************************************************************
    Step1 -> Maintain object attributes
    Object -> 0001
    Method-> 0001
    Program name -> /SAPDMC/SAP_LSMW_IMPORT_TEXTS
    Program type -> D
    Step2 -> Maintain Source Structure
    Source structure -> LONG_TEXT Source structure for long text
    Step 3-> Maintain souce file Source Fields
    ZLONG_TEXT Source structure for long text
    MATNR C(018) MATNR
    LTEXT C(132) LTEXT
    Step 4-> Maintain structure relationship
    Structure Relations 
    /SAPDMC/LTXTH Long Texts:  Header <<<< ZLONG_TEXT Source structure for long text
    Select Target Structure
    /SAPDMC/LTXTH . /SAPDMC/LTXTL Long Texts: Row <<<< ZLONG_TEXT Source structure for long text
    Select Target Structure /SAPDMC/LTXTL .
    Step 5-> Maintain Field mapping and conversion rules
    Here i have assigned constan rules to couple of them like
    /SAPDMC/LTXTH Long Texts: Header
    Fields
    OBJECT            Texts: Application Object
                             Rule : Constant
                              Code: /SAPDMC/LTXTH-OBJECT = 'MVKE'.
    NAME               Name
                             Source: ZLONG_TEXT-MATNR (MATNR)
                             Rule : Transfer (MOVE)
                             Code: /SAPDMC/LTXTH-NAME = ZLONG_TEXT-MATNR.
    ID                     Text ID
                             Rule : Constant
                             Code: /SAPDMC/LTXTH-ID = '0001'.
    SPRAS             Language Key
                             Rule : Constant
                            Code: /SAPDMC/LTXTH-SPRAS = 'E'.
    /SAPDMC/LTXTL Long Texts: Row
    Fields
    TEXTFORMAT  Tag column 
                             Rule : Constant
                             Code: /SAPDMC/LTXTL-TEXTFORMAT = '/'.
    TEXTLINE          Text Line
                             Source: ZLONG_TEXT-LTEXT (LTEXT)
                             Rule : Transfer (MOVE)
                             Code: /SAPDMC/LTXTL-TEXTLINE = ZLONG_TEXT-LTEXT.
    Step6 -> Specify file Legacy
    Data On the PC (Frontend)
                 Data D:\Sales_Longtext.txt
    Step7 -> Assign File ZLONG_TEXT
    Source structure for long text
              Data D:\Sales_Longtext.txt
    Step8 -> Read data
    Output result
    Source Structure            Read                Written                Not Written
    ZLONG_TEXT                  1                       1                            0
    Transactions Read          1
    Records Read:                1
    Transactions Written:      1
    Records Written:             1
    Step 8 -> Display read data
    Field Name             Field Text                      Field Value
    MATNR                    MATNR                         MATERIA1
    LTEXT                     LTEXT                            SALES TEXT FOR Material MATERIAL1
    Step 9 -> Convert data
    File Read: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.read
    File Written: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
    Transactions Read:    1
    Records Read:           1
    Transactions Written: 1
    Records Written:         2
    tep 10 -> Display converted data
    1 /SAPDMC/LTXTH     1    MVKE        MATERIAL1 0001   E
    2 /SAPDMC/LTXTL     2/   SALES TEXT FOR Material       MATERIAL1
    Step 11 -> Start direct input program
    Output result for the same
    Legacy System Migration Workbench Project:
    ZNRD_PRJ1  ORH
    Subproject:   ZNRD_SUBPRJ2     Upload long text
    Object:          ZNRD_LTEXT          Long text tru direct input
    File :              ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
    Long Texts in Total:                                1
    Successfully Transferred Long Texts:  1
    Non-Transferred Long Texts:                0
    Now when i check the material master sales view -> sales text it is empty. Please help me with the same.
    Regards,
    Ranjith N

  • Question about using 10g/11g and APEX ...

    Hi,
    I just recently learned of Oracle's APEX and have a few questions about using it.
    Can I use APEX with express, standard, and enterprise editions of 10g and 11g?
    Are all of these free to use?

    You might want to read about APEX rather than jumping into questions that are reasonably well documented. Info at http://www.oracle.com/technology/products/database/application_express/index.html
    Your specific questions:
    1) Apex is a package that can be installed into any properly licensed database.
    2) The price for the production license of the database varies by edition.
    The price for Express Edition is $0 for use in production. Part of the cost for that edition is 'no Oracle Support based support, no patches, data volume limitation, etc.'

  • Question about using new battery in old Powerbook

    I have a pre-intel Powerbook G4, and the battery is pretty much toast (lasts about 15 minutes now). I have ordered a new battery for it, and I have this question about using it:
    Am I smarter to keep the new strong battery out of the PB most days (as I usually work with it plugged in at home) and just pop it in when I know I will be out surfing on batteries? Or is it just as good living in my laptop 24/7 and only occasionally being called upon to do its job?
    Current bad Battery Information below:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 1144
    Remaining Capacity (mAh): 1115
    Amperage (mA): 0
    Voltage (mV): 12387
    Cycle Count: 281
    thanks folks, Shereen

    Hi, Shereen. Every Powerbook battery wants to be used — drained and then recharged — at least every couple of weeks. If you've always used your Powerbook on AC power nearly all the time, and not followed that pattern of discharging and recharging the battery every week or two, it's possible that your use habits have shortened the lifespan and prematurely diminished the capacity of your old battery. Of course it's also possible that your battery is merely old, as a battery's capacity also diminishes with age regardless of how it's used. You didn't say how old the battery is in years, so this may or may not be an issue. I mention it only because it can be an issue.
    For general information on handling a battery for the longest possible lifespan, see this article. My advice on the basis of that article and long experience reading these forums is that it would be OK to do as you propose, but I doubt that you'd derive any significant benefit from it. You would still want to be sure of putting the new battery through a charge/discharge cycle every week or two, even if you didn't have a reason to use the Powerbook away from home or your desk, because sitting unused outside the computer is just as bad for a battery as sitting unused inside it. And you should never remove the battery from your computer when it's completely or almost completely discharged and let it sit that way any longer than a day or two.
    Message was edited by: eww

  • Question about using TVARV in an ABAP program

    Hello gurus, Im sorry about the silly question.
    I have a question about using TVARV in an ABAP program.
    A program is presenting a problem and I think that in this code:
    SELECT SIGN OPTI LOW HIGH
      FROM TVARV
      INTO TABLE R_1_163431035_VELOCIDADE
      WHERE  NAME = '1_163431035_VELOCIDADE'
      AND    TYPE = 'S'.
      IF ZMM001-VELOCIDADE_B   IN R_1_163431035_VELOCIDADE AND
          ZOPERADORAS-OPERADORA = 'ABCD' AND
          ZMM001-MATERIAL       IN R_1_163431035_PRODUTO.
      ELSE.
      ENDIF.
    What happens is that the value "ZMM001-SPEED" B not exist in "R1_163431035_VELOCIDADE" but the program executes commands under the IF and not under the ELSE, as I imagine it would work. Is this correct ?
    I am new to ABAP programming, but I have a lot of XP in other programming languages ​​and this makes no sense to me.
    Anyone know where I can find some documentation of the use of "TVARV" in ABAP programs?
    I search the Internet if other programmers use TVARV this way, but found nothing, which leads me to think that was a quick and dirty solution that used here.
    If this is a bad way to program, what would be the best way?
    Regards
    Ronaldo.

    Hi Ronaldo,
    But in this case, the range is not empty, there are 17 records, in this way.:
    For the column "SING" all values ​​are "E"
    It means that the result is false if ZMM001-VELOCIDADE_B has the same value as one of the 17 records (E = exclude).
    For instance, if it has value 'C' and one of 17 records matches C, then the result is false.
    The "IF" with "IN" using "TVARV" as used in the program of the post above has the same behavior of a selection screen?
    Yes, the same behavior as the selection criterion to be exact. You can press the help key in the complex selection dialog for more info.
    I know it's a silly and very basic question, but other language that I used, only the SQL has the "IN" operator, but I think they work in different ways, so I would like to understand how it works in ABAP.
    Not silly ;-). Yes they work differently.
    More info here:
    - http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba74635c111d1829f0000e829fbfe/frameset.htm
    - http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba71f35c111d1829f0000e829fbfe/frameset.htm
    BR
    Sandra

  • Question about using Macbook in Vietnam.

    I have a question about using Macbook in Vietnam. I bought my mac here in the US, and I'm going to visit Vietnam, but I'm wondering if I can plug in the power directly into the wall or I have to need any convert power modem for my mac. The only thing I know that Vietnam use 220V so, can anyone help me?

    You may need a plug adaptor, but you don't need a power converter.
    (43828)

  • I have a question about using adobe CS files in CS6 edition

    I am a graphic artist . I have a question about using adobe CS files in CS6 edition. when I am gonna open thse adobe CS created files in CS6 Edition i get a color variation than i made with the CS version.Please give me an idea about this issue as soon as possible.If you need i can upload my problem as a screenshot to clearity

    donrulz,
    Are your Edit>Color Settings the same?
    Are you using spot colours, such as Pantone (there have been some changes in CMYK values with new colour books)?

Maybe you are looking for