The quickest way to create multi clips?? for stereo test

I'm on location. Want to test a stereo camera setup. I've never worked with multi-clips before. I don't have the time to study the manual till I figure out how multi clips work.
Is there an 'easy' way for me to create a multi-clip setup using the two (already captured) Quicktime clips (eye A, eye B).
I'm thinking that if I can expand the viewer window I'll get a big enough view of both images 'eyes' for the director to be able to see the stereo effect. The director is an expert at 'eye-crossing' to see how the different variations on the paralax or 'toe-in' might be working (or not).
So I'd be most appreciative of a 1,2,3 description of how I could set up the multi-clips to be able to do this.
Ben

I assume you already have the clips in a format that Final Cut can use.
File:Import to bring in the two clips. Double click each one to bring into the viewer ( one at a time), and set In point ( assuming that they both are time synced).
They command click each clip and once they are selected, ctl click brings up a menu where you can select multiclip.
You have a setup window, choose align by In.
You now have a multiclip item, drag to the viewer to see both.

Similar Messages

What is the best way to create shared variable for multiple PXI(Real-Time) to GUI PC?

What is the best way to create shared variable for multiple Real time (PXI) to GUI PC? I have 16 Nos of PXI system in network and 1 nos of GUI PC. I want to send command to all the PXI system with using single variable from GUI PC(Like Start Data acquisition, Stop data Acquisition) and I also want data from each PXI system to GUI PC display purpose. Can anybody suggest me best performance system configuration. Where to create variable?(Host PC or at individual PXI system).

Dear Ravens,
I want to control real-time application from host(Command from GUI PC to PXI).Host PC should have access to all 16 sets PXI's variable. During communication failure with PXI, Host will stop data display for particular station.
Ravens Fan wrote:
Either. For the best performance, you need to determine what that means. Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables? If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
You want to located the shared variable library on whatever machine is more critical. That is probably each PXI machine, but only you know your application.
Ravens Fan wrote:
Either. For the best performance, you need to determine what that means. Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables? If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
You want to located the shared variable library on whatever machine is more critical. That is probably each PXI machine, but only you know your application.

What's the fastest way to create a clipping path?

In CS3 & 4 I've created a bazillion clipping paths via pen tool and mouse. I've also tried using the various selection tools to create selections, then turning those selections into paths and modifying the path. I've roughed in paths then zoomed way up to fine tune them.
Is there any plug-in or other slick method to create clipping paths real quickly? Maybe a Wacom pen would work quicker than a mouse? I haven't tried that. I've tried everything else I can think of.
I happened to notice there are online services that charge like $2.00 to create a clipping path for you. So that either has to be from slave labor or someone has figured out a real fast way to do it.
I'm sorry to repeat a question if it's been answered before. I searched for clipping paths in the Photoshop forum and Adobe returned 0 results.

A Wacom tablet is a must. If you are doing lots of clipping paths, avoid carpel-tunnel, and get the work done easier and faster using the Wacom. I've tried all the sizes and I use a 4x5 because it's all the real estate you need, even on 30" monitors. Other than that, there is no software that thinks like a human can in making discretionary choices. Just get the Wacom and roll. You'll have that pen tool motating at full throttle and even make the labor enjoyable.
Be sure to take your customary 20 minute ergonomic breaks to let your eyes focus and +20 feet away.
Best,
Ken

What is the best way to create a bookmark for a returning user??

Hello all... hello again Steve...I am back with another question- what is the best way to implement a bookmark system so returning users can pick up where they left off in an AW lesson? I have tried the usual internet searches, always do, but the few samples/answers I have found were AW5, not much help...
I have a dozen or so maps attached to my framework, I would like a user to return to the last map he viewed before closing. (My AW is communicating fine with an Access database, so if passing a variable to Access and then back to AW when the lesson starts is on the right track, let me know...) If the answer here is too complicated, maybe nudge me in the right direction and I will dive back in.
Thanks in advance to anyone who has some guidance, I really do appreciate it!
Terry

Try this outline, see if it helps ...
Grab a reference to the Map as you enter it, then save that to the database when you leave.
You want something that will give you the equivalent to a page number - if you have 7 maps hanging off the Framework, and the user is in the 6th map when he exits, you want to save the number 6.
There are scores of ways to do this, but probably the easiest is just to attach a calc to each map that has this code
(I don't have Authorwar handy to check syntax, so you should check!)
BookMarkPage = ChildIDtoNum(IconParent(IconID), IconID) <-- tells Authorware to return the "page number" of the current map
Save BookMarkPage to your Access database on exit .
On return, read the bookmark back into BookMarkPage, ask the user if he wants to return to bookmark. If yes, use a calculated navigation that uses
ChildNumToID(@the name of your Framework or it's ID, BookMarkPage)
Note that you could wrangle something similar by saving the IconID of your Map, or the IconTitle, but both of these can break if you ever update your file by adding or removing pages, renaming them etc. With this method, all you need is a simple page count check that ensures that you are not trying to nav to a page number that does not exist (use IconNumChildren).
Steve

What is the best way to create illustrator files for frames created in an InDesign layout?

Is there a quick way to do that or do i need to note the size of each frame in InDesgin and then input that into the dialog in illustrator. It seems like a waste of time. Is there a better way?
I am new to InDesgin. What I'd like is a way to automatically generate blank illustrator files to fill in the graphic frames in my layout.
Thanks,
John

I have no existing Illustrator files for the project. I'm tring to use InDesign to create a rapid protoype. I may be working backward from what is expected.
If I could generate blanks that are the correct size that would be an easy way to get started on them, but copying the sizes to the new document dialog box in Illustrator is not a big deal either.
I figured that if i could create an Illustrator blank from InDesign that would get me started in illustrator quickly and also place the new file in the frame.

What is the easiest way to create different edges for ellipses (tire edges)

Hi everyone,
I thought this was going to be a piece of cake in the new Illustrator CC but I am having a few unanticipated issues:)
If you can think of a better way to do this (which I am SURE you can!) please let me know:)
I need to create some vector tire images with different edges, such as the top one in the image below.
So I thought this would be SO easy by simply creating a pattern brush in Illustrator and then using that for the outside. So I created the shape you see in the middle image below....and created a pattern brush with this shape.
I then created an ellipse and used the new brush for the outline. It worked GREAT!!
BUT...here is where the problem begins. All of those are open paths...it has taken the shape and applied it to the outline but has kept each shape separate, so I am not able to fill the circle in black. I could of course go in and manually join each little corner separately where the little shapes meet but this will take FOREVER with all the images I have to do.
Is there an easier or more recommended way to go about doing this?
Thank you so much in advance for your help:)

Oh my goodness Jacob...you are my HERO!! I had COMPLETELY forgotten about Live Paint!! This did EXACTLY what I needed:)) Thank you SO much! If I could give you a virtual hug I would. This was driving me absolutely crazy.
Have a wonderful afternoon! Now I can rest in peace:)

What's the best way to create zoomable map for iOS by using Flash?

We got a big location map that allows user to zoom in and out and do the panning but the image of the map is not very smooth when you pan it in iOS (Android is ok) so is there a way to fix this problem?
thanks!

Which one you use might depend on the nature of the picture, like, a picture with lots of flat colored areas will come out a lot smaller as a lossless PNG than as a 100% JPEG. It would be interesting to try an 8 bit or 16 bit PNG, see if that makes it use less GPU memory. JPEG is usually 24 bit, and it or a 24 bit PNG should take the same amount of GPU memory.
There is a chance that AIR is using 32 bit throughout on iOS, so it won't matter what the original image was if that's the case, just the width and height would determine the amount used.
The smoothing setting is more about whether you're going to scale the image, which I guess you would be if you want the image to be scaled down. If you could have a smaller version that the user then touches to go immediately to the larger version, both could be set to have no smoothing, which may improve performance.

What's the fastest way to create simple report for the web?

I have Developer 6i and Oracle 9I installed.
If i have a report already done, how can I make it available to users, so they can access them thru an IP or a host?
can I achieve that just with my developer 6i (report builder) and my database (oracle 9i)???
If so, how?

1) pls see
[     Publishing reports to web - 10G ]
see
[    All Docs for all versions    ]
for 9i version of same document
2) Better to have 9i builder - 9i ias combinations
(not sure whether other combination is supported or not. but understandably it is best to have same combination]
[    All Docs for all versions    ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

Whats the best way to create USER variable in BI Apps?

I have just installled BI Apps and am trying to integrate EBS R12 with OBIEE 11g
We have USER variable already defined in the BI Apps rpd.
In EBS Security context init block i need to define USER variable, but when i define it... it says *'USER' has already been defined in the variable "Authentication"."USER"*
Whats the best way to create USER variable for EBS Security Context init block?
1) Delete the existing USER variable and then define a new one ( in this case all the places where USER variable is getting used in the rpd would become <missing>)
And i was told that it should not be done.
Let me know how can it be done.
Thanks
Ashish

Disable existing Init block and then double click on USER variable and hit on NEW... button to create new Init block
Thanks
Edited by: Srini VEERAVALLI on May 1, 2013 4:18 PM

Best way to create customized counter for slideshow.

Hello everone. I am stuck on this one. What is the best way to create a customizable for the slideshow widgets. Im looking to create circles or boxes that change color in relation to the picture in the slideshow. I am sure that I have seen it on a muse site before, but just can't figure how to get it done. Thanks!

Have you tried using:
Effect > Text > Numbers ?
You could also have found that answer by searching for "numbers" at the Community Help site. It's really a great resource in addition to the online help files. Try it out!
(It would have been the first result returned from the search...)
http://www.adobe.com/support/aftereffects/

Best way to create a UI for a Composite app

Hi all,
What is the best way to create a UI for a Composite app that we are developing using CAF and GP.
1) WebDynPro Callable Object that implements GP Interface.
2) Consume the Application services(exposed as web services) in WebDynPro app
3) Creating a WebDynPro Model for the CAF Services.
4) Create a WebDynPro Application Callable Object (If yes how can we map the input and output params b/n WebDynPro app CO and CAF Application service).
Plz do remember we are using GP here.
Thanks in advance,
Best Regards,
Sudheer.

Hi,
You can use Web Dynpro or Visual Composer for designing UI for your CA.
1) WebDynPro Callable Object that implements GP Interface.
You can use Web Dynpro Component CO to use a single Web Dynpro component in your GP Activity.
4) Create a WebDynPro Application Callable Object :This is for entire Web Dynpro Application(multiple components).
2) Consume the Application services(exposed as web services) in WebDynPro app :
3) Creating a WebDynPro Model for the CAF Services.
For example, in updating operations first we have to get the existing data from Database.For getting this data you can use application services in your Web Dynpro component.Later expose this WD component as CO insert in a GP activity.
For creating operations, you can use Web Service CO(Application Service) directly in GP Activity.
These links are useful for you.
[link1|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00c07d0-61e0-2a10-d589-d7bc9894b02a]
[link2|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b99341-60e0-2a10-6e80-b6e9f58e3654]
[lnk3|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1078e3b0-ec5d-2a10-f08a-c9b878917b19]

The best way to make proxy files for editing?

Hi,
What is the best way to create proxy files for editing? I'm thinking Apple ProRes 422 (Proxy). The original material is DVCPRO HD 1080i50, shot on Panasonic P2 cards, and copied on to hard drives. But as there is about 400 hours of it, I desperately need to find a clever way to make smaller proxy files for editing.
I would also like to make the proxies at a smaller resolution than 1080i for the editing process.
I guess it's possible to import the media and then batch export it to the proxy format, but Is there a better way?

I'm not able to ingest the material directly from the P2-folders as ProRes 422 (Proxy). No matter how much I change the import settings in "Log and transfer", it still ingests as DVCPRO HD 1080i50.
Correct. DVCPRO HD P2 can only come in as DVCPRO HD. You can't transcode it. AVCIntra P2 is what you can bring in as ProRes. (Sorry Tom).
I can of course transcode it form there to the proxy format and delete the ingested files,
Why? Why do that? You have ingested all the files, right? You ALREADY HAVE THEM...right? Why not work with them? You obviously have the room (20TB). Why import all this, then now take the days it would require to make proxies?
Making the ProRes-proxies directly from the P2-material seems more logical, or isn't it?
DVCPRO HD P2 cannot come in as anything else, so the offline/online workflow for them doesn't work unless you import it all, then transcode to a smaller format...but then need to keep the originals online to relink to when you are done. If you wanted to do an offline/online, you needed to research this better...or test it...before you shot your hundreds of hours only to find that what you want to do won't work.
Shane

Premier pro cs5 saving multiple trimmed clips as indivdual files in format h264 mov, what is the quickest way to do it. i have 280 trimmed files.

premier pro cs5 saving multiple trimmed clips as indivdual files in format h264 mov, what is the quickest way to do it. i have 280 trimmed files.

Hello Ashraf,
Sorry you didn't get any help on this post. In the future, please contact Adobe Support for 1-1 assistance on issues like this: Contact Customer Care
Thanks,
Kevin

What is the best way to create a SSRS 2005 Line Chart Report for a 12 month period?

I'm looking for advice on how to create a SQL Server 2005 query and line chart report for SSRS 2005.
I need to display the peak number of patients assigned to a medical practice each month for a 12 month period based on the end-user selecting a
single month and year.
I've previously created a report that displays all patients assigned to the practice for any single month but I’m looking for advice on how to
how to produce a resultset that shows the peak number of patients each month for a 12 month period. I thought about creating a query that returns the peak count for each month (based on my previously created report which displays all patients assigned to the
practice for any single month) and then use a UNION statement to join all 12 months but I'm sure that isn't the most efficient way to do this. The other challenge with this approach (twelve resultsets combined via a UNION) is that the end-user needs to be
able to select any month and year for the parameter and the report needs to display the 12 month period based on the month selected (the month selected would be the last month of the 12 month period).
For the report I’ve previously created that displays all patients assigned to the practice for any single month, the WHERE statement filters the
resultset on two fields:
Start Date - The date the patient was assigned to the practice. This field is never null or blank.
End Date - The date the patient left the practice. This field can be null or blank as active patients assigned to the practice do not have an End Date. When the patient
leaves the practice, the date the patient left is populated in this field.
Using these two fields I can return all patients assigned to the practice during Nov 2012 by looking for patients that meet the following criteria:
start date prior to 11/30/2012 (using the last day of the month selected ensures patients added mid-month would be included)
AND
end date is null or blank (indicates the patient is active) OR the end date is between 11/1/2012 -11/30/2012 (returns patients that leave during the month
selected)
Regarding the query I need to create for the report that displays the peak count each month for 12 months, I'm looking for advice on
how to count patients for each month the patient is assigned to the practice if the patient has been assigned for several months (which applies to most patients). Examples are:
John Doe has a start date of 6/01/2012 and an End Date of 10/07/2012
Sally Doe has a start date of 8/4/2012 and no End Date (the patient is still active)
Jimmy Doe has a  start of 7/3/2012 and an End Date of 9/2/2012
Given these examples how would I include John Doe in the peak monthly count each month for May - October, Sally Doe in the peak monthly count for
August - December and Jimmy Doe in the peak monthly count for July – Sept if the end-user running the report selected December 2012 as the parameter?
Given the example above and the fact I'm creating a line chart I think the best way to create this report would be a resultset that looks like
this:
Patient Name
Months Assigned
John Doe
June 2012
John Doe
July012
John Doe
Aug 2012
John Doe
Sept 2012
John Doe
Oct 2012
Sally Doe
Aug 2012
Sally Doe
Sept 2012
Sally Doe
Oct 2012
Sally Doe
Nov 2012
Sally Doe
Dec 2012
Jimmy Doe
July 2012
Jimmy Doe
Aug 2012
Jimmy Doe
Sept 2012
From the resultset above I could create another resultset that would count\group on month and year to return the peak count for each month:
June 2012 - 1
July 2012 – 2
Aug 2012 - 3
Sept 2012 - 3
Oct 2012 - 2
Nov 2012 - 1
Dec 2012 - 1
The resultset that displays the peak count for each month would be used to create the line chart (month would be the X axis and the count would
be the y axis).
Does this sound like the best approach?
If so, any advice on how to create the resultset that lists each patient and each month they were assigned to the practice would be greatly appreciated.
I do not have permissions to create SPs or Functions within the database but I can create temp tables.
I know how to create the peak monthly count query (derived from the query that lists each patient and month assigned) as well as the line chart.
Any advice or help is greatly appreciated.

Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want.
Doing a cross join between my original resultset that had two dates:
08/27/2010
10/24/2011
and a calendar table that has 24 rows (each month for a two year period)
my new resultset looks like this:
I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
the Months Assigned value must be greater than or equal to the date assigned value.
Any advice would be appreciated.

Is there a way to create a thumbnail for QuickTime videos on a PC? All the videos currently have the same QuickTime logo as there thumbnail.

Is there a way to create a thumbnail for QuickTime videos on a PC? (Windows XP) All the the videos currently have the same QuickTime logo as their thumbnail.

Abdur,
In the sheet :: table :: cell that is going to receive the data, type an equals sign, then click on the cell that the data will come from and press Return.
This will require that you navigate to the origin cell by choosing the proper sheet.
Jerry

The quickest way to create multi clips?? for stereo test

Similar Messages

Maybe you are looking for