The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RA

The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RAW tool icon is grey, not active. I am going on a trip Tomorrow and I need Bridge to be working. It was working earlier.

I never notied that icon before, and I've been using Bridge for 7 years.
Usually, when you have no image previews for raw files, this means that your Camera Raw plug-in is older than your camera. People always come across this problem when they use a new camera with older software.
To be sure, we need to know which camera you are using, and which version of Camera Raw. To save typing this out for the three-thousandth time, please follow this page which I wrote earlier:
http://yphotography.co.uk/articles/get-adobe-camera-raw-acr-open-photos/
This covers the subject, which is by far the most commonly asked question about opening raw files by a country mile.
If everything checks out fine, let us know. If not, give us more information and we may be able to fix this for you.
PS. Please just open one discussion per problem. There are three threads on this now. It makes it difficult to follow.

Similar Messages

My i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting general

my i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting >general<reset<reset network setting. but all in vain. tell me the solution

restore your phone as new through itunes. if the issue persists after a factory restore via itunes, it means you've got a hardware issue and the phone needs to be repaired

I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS

Any idea why is Bridge latest version not working when trying to open it in Photoshop CC 2014 ? (French version) ? When trying, Creative Cloud app will open to ask if I want to download newest version, which I did numerous times now.
Thank you
Guy Deschenes
Shawinigan (QC) Canada

Hi Eric,
Here's how a similar problem was resolved between PS and BR.
The issue was confirmed by ChunXiaYang at Adobe staff and solution put in the forum discussion on June 19 (no. 13). Here's a copy:
I have confirmed that this is a known issue before release. And the workaround is to uninstall and reinstall PS 2014. Then Bridge can be launched by selecting 'Browse in Bridge' in PS2014.
Please try the installation, and let me know whether it works. Thanks!
It woks just fine since I unistalled and reinstalled PS 2014.
Guy
Le 2014-07-17 à 1:13 PM, ericboerner a écrit :
I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS
created by ericboerner in Bridge General Discussion - View the full discussion
I did this with a fresh install of the entire CC package. As soon as the CC packages updated, CC Bridge broke. Unistalled CC PS, reinstalled again, CC Bridge works, but CC PS updates itself again, and breaks CC Bridge.
You know... The whole move to CC has been a massive cluster... I've struggled with the CC packages for my entire subscription year, and now I'm 1.5 month away from needing to throw down another $720 for no reason what-so-ever, just so we can Beta test your really screwed up subscription services.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6559164#6559164
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

I would do another SMC reset. If nothing changes you should take the computer in to an Apple store for a free diagnostic. You should make an appointment.
http://www.apple.com/retail/geniusbar/

HT203254 my desktop is not working when i open it all it does is show the color weal and it never gos away on my mac book pro how do i fix it?

my desktop is not working when i open it all it does is show the color weal and it never gos away on my mac book pro how do i fix it?

It means, tentatively, that system files are missing or damaged and you will have to reinstall Snow Leopard. See the following:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this?

My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this? If not is there any way to actually get a genuis appointment lol to get one of them to have a look at the hardware on the keyboard?

Apple Support (formerly ExpressLane):
https://getsupport.apple.com/GetproductgroupList.do
https://getsupport.apple.com/GetSASO?SG=SG001&locale=en_US

Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner sti

hi

Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner still shows full signal. However, I noticed when I went into Wifi settings (Settings>Wifi) that there is no checkmark next to my network name (only the spinning circle icon, as if it's trying to process something). This only happens at home (I can browse the internet while connected to Wifi at university). My other Apple devices (MacBook Pro and iPhone 4S) work perfectly fine at home.
I've tried resetting my router, restarting my iPad, resetting Network Settings on my iPad, and tried following Hynes' instructions on this thread:https://discussions.apple.com/thread/2453187?start=15&tstart=0, but nothing has worked so far (although I have to admit that I found the instructions on that thread somewhat confusing, so there is a chance that I accidentally did not follow them properly).
Could someone please help? It'd be VERY much appreciated.

Microphone of my iphone is not working when i call anyone nobody can listen but me, its working with headphone but its also working with videocam recording, please help me to solve this probelm.

microphone of my iphone is not working when i call anyone nobody can listen me its working with headphone. but it is working with videocam recording, please help me to solve this probelm.

Try this:
1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
3. If the issue persists, Your iPhone need repair.

IMessage send is not working on my ipad2. I can receive only.

iMessage send is not working on my ipad2. I can receive only.

make sure you are typing your message in the line BELOW the line with the camera icon, soon as you type in that location the send button will become active.
Regards, Ct

I am using version iPhoto'11. Since I installed this version I experience some difficulties. After importation of pictures I can see the pictures under Library/Pictures but not under Library/Events. However I can see the event and the number of pictures.

Hello,
I am using version iPhoto'11. Since I installed this version I experience some difficulties. After importation of pictures I can see the pictures under Library/Pictures but not under Library/Events. However I can see the event with the event title, the number of pictures and the pictures itselve as small thumbnails. BUt ounce I want to open the event to see the pictures in full screen the event title annouces 0 pictures and no pictures are visble anymore to mee. I have checked if the pictures are marked as hidden and this is not the case. What's going wrong. All the other events are visible in a normal way.
The albums with the same pictures into them are visible.
Thanks for your help,
Raf

Make a temporary, duplicate copy of the library and try the two fixes below in order as needed:
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
2 - delete iPhoto's cache files that are located in your Home/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select options #1, #2 and #6.
Click to view image full size
OT

I can see only one ringtone in the custom ringtone box.plz help

i can see only one ringtone in the custom ringtone box.plz help

Cap,
This view, with the one photo big and the thumbnail strip across the top, is what happens when you double-click a photo with "Edit in: Main Window" set in the Preferences. There should be a button visible that says either Done or Return, to exit edit mode and return you to the library. If you still see only one photo, use the size slider in the lower right corner to reduce the photo size and get more thumbnails on the page.
If, for some reason, you can't exit the edit mode, you may have a corrupt preference file. Quit iPhoto. Use the Finder to navigate to Macintosh HD/ Users/ (your user name)/ Library/ Preferences/ com.apple.iPhoto.plist and move that file to the Trash. Launch iPhoto, and you should be returned to the main viewing mode. You'll have to go in the Preferences and reset them to your liking.
Regards.

The websites are being stretched sideways to twice their normal width so I can see only the left half of a site unless I go into "Fullscreen" mode; ideas?

Whenever I use Firefox the page opens so that I can see only the left half of whatever site; i.e. half of the useful page info (the rest is cut off) displays on the right half of my screen while the left half of my screen shows just background of the site. Using the maximise/restore button does nothing. If I swap to the fullscreen view I can see everything fine but obviously I lose my tool bars. I installed the latest version of Firefox with no joy. I've looked for a page setup function to no avail. I thought that time would fix this as it is something that has happened before but was temporary. Other browsers work fine. I thought about uninstalling then re-installing but I'm not keen to lose my bookmarks etc. unless I have to. Thanks for your help in advance; I hope this ramble makes some sense.
Cheers.

This issue can be caused by the Babylon Toolbar 1.1.8 extension
See:
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I have used Photoshop CS2 for over 5 years with Dimage A2 using the RAW forment, Now it will not work. Any answers out there? Thanks

The Photoshop has always worked well with the Minolta DimAge A2 using the RAW format. Now, it will not. Strange that Corel Paint Shop Pro X2 Ultimate works fine and cost less tha $100... Any responses out there about that?

They may know more in the Camera Raw forum.

TS3694 My ipad is disabled and i've tried restart it to the factory setting and it's not working

I'm trying to restore my ipad to the factor setting because it is locked and says "ipad disabled" any suggestions?

Place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
-This should works.
Cheers,
Alec
c94 wrote:
My ipad has been disabled because I forgot the password. I have tried to restore it but iTunes says that I need a password and obvisouly I don't remembe the password. I need my ipad for school, so can any one help me?

Right, MacBook Pro 17" early 2011(Built March) and my new OCZ sata III 6G not working, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III.

My MacBook Pro 17" early 2011(built March) and my new OCZ sata III 6G are not working together, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III and in my MacBook Pro it does not work.
Now MacBook Pro 17" early 2011 built May onward do not have this problem it was fixed in the Intel's 6 Series Chipset. (So there is a problem). Cam I have my MacBook Pro fixed please.

After biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it.

The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RA

Similar Messages

Maybe you are looking for