The receipt corrections form for PO does not recognize LPs

Hi
The receipt corrections form for PO does not recognize LPs to perform corrections. The LPs are currently in Subinventory, we have lpn numbers, through that i have found the on hand quantity and which are in Packed Condition ..What would be the reason ?

Tim
We created a new report that is XML-PDF. This was a copy of the seeded Oracle Purchasing report. This report uses a new XML document that generates a PDF. If I submit this new report the PDF document is created and viewable. In Purchasing I also set the default output to PDF using the same XML - PDF that we created. I have an open TAR with Purchasing (5553373.992) they support the seeded Template but want to wash their hands on the custom.
I am not sure what your question is - "new PO process in 11.5.10". When I do a PO approval and generate an email - PO it kicks off automatically the PO Output Communication program based on the defaults I set in Purchasing it should be using the new tmeplate.
Bob

Similar Messages

HT201253 iPhone 5s is not recognized by iTunes - when I connect my iPhone, iPhoto opens and the phone begins charging but iTunes does not recognize it and I cannot sync. Any advice?

when I connect my iPhone, iPhoto opens and the phone begins charging but iTunes does not recognize it and I cannot sync. Any advice?

Howdy AndieKanaras,
It sounds like your iPhone is being recognized everywhere but in iTunes. I would use the troubleshooting for that issue in the following article, named:
If you don't see your connected device in iTunes for Mac
Thank you for using Apple Support Communities.
All the very best,
Sterling

When I try to send photos over the internet now, it says it does not recognize my account or pssword. I have never had this problem before, so what can I do to fix it?

When I try to email photos from iphoto, I get a message that says it does not recognize my account or user name. I have not had a problem with this before, so why now? How do I fix this?

iPhoto Menu ->
Preferences ->
Accounts ->
Delete and recreate your email settings.
Alternatively, use Apple's Mail for the job. It has Templates too - and more of them.

HT1689 My app for magazine does not recognize that I paid for subscription

I paid for subscription for the week magazine and the app does not recognize I paid for it

This sounds like an obvious question and I suppose that it is, but what are you basing your statement on?

When I connect my Iphone 5 to my computer to tranfer pictures my computer says USB device attached to the computer has malfunctioned and Windows does not recognize it. What do I do??

I do not understand why my computer is telling me that my new iphone 5 has malfunctioned and Windows does not recognize it when I plug it in the computer.
I have tried several times and gotten the same message. Any suggestions?
thanks

Make sure you can see your device in the sidebar>>
Open Itunes on your computer
Click View
_Click View Sidebar
Then Try EXPANDING all sections in the following article, pressing CTRL>p, printing it all out and following the instructions step by step. Use the instructions that apply to your computer's Operating System, but don't skip any steps.
http://support.apple.com/kb/TS1538
You are installing the Apple Mobile Device USB driver, which I did not have to do previously, so something in the updates has been left out / or changed.

I transferred CS5 to a new computer using PC transfer program. CS5 started up on the new computer OK, but now does not recognize raw files. Should I uninstall and reinstall again?

I transferred CS5 to a new computer using PC mover ultimate. CS5 appeared to start up normally, I had to insert the serial number from my original CD. However, now the program does not recognize CR files and Adobe bridge is not working properly. I get messages that CS5 needs to be updated, but the updates fail. What should I do? Should I uninstall CS5 on the new computer, uninstall CS5 on the old computer using the original CD, and then reinstall CS5 using the CD on the new computer?

Transferring programs does not work well with Adobe applications. You should install them.
As far as having the program on different machines goes, you are allowed to have two activated installations so if it is working on the original machine there is no reason to remove it unless you need the space.

The add work button for behance does not work. how to fix this?

I cannot publish to Behance the add work button does not work. I also cannot upload work to Adobe Voice Either. Why is this happening? I see my comrades uploading work.

Sorry to hear that! To resolve this quickly, submit a ticket here so that we can give you one-on-one support: https://behancenetwork.zendesk.com/anonymous_requests/new
Off the bat, if you're having this issue on several products, it might be an issue with your computer or browser settings. We'll help in the ticket!

[SOLVED] kms for intel does not recognize hdmi/displayport

Hi,
I updated yesterday my laptop, which has a intel gpu coming with the Core-I5 chipset (not the HD one).
With the new kernel 3.6.10, it does not detect any hdmi/displayport ouput anymore. VGA and LVDS are just fine and also the modes which are detected are correct.
First difference is also, that when the external hdmi display is connected also during startup, usually the framebuffer is visible on both LVDS and HDMI but not anymore.
The log output does not look too bad:
$> dmesg | grep fb
[ 0.511013] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 0.511015] vesafb: scrolling: redraw
[ 0.511016] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.511618] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011000000, using 4032k, total 4032k
[ 0.797827] fb0: VESA VGA frame buffer device
[ 3.094692] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 3.878516] fbcon: inteldrmfb (fb0) is primary device
[ 4.049234] fb0: inteldrmfb frame buffer device
$> xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
LVDS1 connected (normal left inverted right x axis y axis)
1280x800 60.0 + 50.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 521mm x 293mm
1920x1080 60.0*+
1680x1050 60.0
Any help would be greatly appreciated, also please let me know if you need more info.
SOLVED: This is now solved with kernel 3.6.11
Thanks,
Johannes
Last edited by the_hippie (2013-01-07 19:11:20)

Hi,
I updated yesterday my laptop, which has a intel gpu coming with the Core-I5 chipset (not the HD one).
With the new kernel 3.6.10, it does not detect any hdmi/displayport ouput anymore. VGA and LVDS are just fine and also the modes which are detected are correct.
First difference is also, that when the external hdmi display is connected also during startup, usually the framebuffer is visible on both LVDS and HDMI but not anymore.
The log output does not look too bad:
$> dmesg | grep fb
[ 0.511013] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 0.511015] vesafb: scrolling: redraw
[ 0.511016] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.511618] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011000000, using 4032k, total 4032k
[ 0.797827] fb0: VESA VGA frame buffer device
[ 3.094692] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 3.878516] fbcon: inteldrmfb (fb0) is primary device
[ 4.049234] fb0: inteldrmfb frame buffer device
$> xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
LVDS1 connected (normal left inverted right x axis y axis)
1280x800 60.0 + 50.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 521mm x 293mm
1920x1080 60.0*+
1680x1050 60.0
Any help would be greatly appreciated, also please let me know if you need more info.
SOLVED: This is now solved with kernel 3.6.11
Thanks,
Johannes
Last edited by the_hippie (2013-01-07 19:11:20)

Blackberry Desktop Manager for Mac does not recognize any Calendars for syncing

ive installed the blackberry desktop manager for my Macbook and hooked my phone up through the USB port when I started the program and when I go to the calendar section it says "There are no calendars available on this computer for syncing. Please launch a new iCal and create a new calendar". How do I fix this? I have a lot of information on my iCal that I want transferred over to my phone, but it won't recognize the calendar in the program. Help

I'll try to help...first you did not provide any pertinent information for troubleshooting: Mac OS, device, device OS...
Now before you do anything go to iCal>File>Export and create an iCal archive (JIC). The rest is dependent on the OS (as each store iCal data differently)...It is possible that your calendar file is not where it should be. Try cleaning system and user cache. Restarting your mac and repair permissions.
On the device side, what do you have as the default CICAL? You could try forget device in the DM or trash the user>username>application support>BlackBerryDesktop folder and start over.
Now do you have more than one calendar? In the DM how are you setting the sync? Two Way, All Calendars...to what calendar are you adding on the device? Under Advanced Settings are you selecting All events and are you Replacing all calendar events on the Blackberry device? Remember that even if you have multiple calendars in iCal they will sync as one in the BlackBerry.
4.6.1.305 hybrid
Mac Pro 2X2.8 Quad SL

The date modified date for documents does not change

All my documents except for today and yesterday (whenever that happens to be) shows the date modified as being a random date of last year that is not when they were last modified. Does anybody know how to fix the problem so as the documents accurately show when they were last modified?

Go to website.
Change it back.
You will have 2 minutes to delete iCloud from iPhone.
Change it to new one on website and verify.
Sign in new one on the phone.

I was updating my iphone in itunes, then it said the update went wrong and now does not recognize the phone. Says that it is an unknown iphone and I must restore the phone. How can I get it back without deleting all of my stuff?

I was updating my phone in itunes and the "update went wrong" and now the phone is not recognized by itunes. I unattatched the phone and it wont turn on or off, just shows a picture of the itunes symbol and a usb cord. In itunes it says that it is an unknown iphone and is in recovery mode so I need to restore the phone. If I restore the phone I loose all my pictures, which I dont want to do...and my contacts. Is there any way around this, so I can get my phone back to normal without wiping it all out? Thanks

To be more clear:
Was you phone hacked/jailbroken BEFORE you hooked it up?

The Help Tab (OSX ML) where you search for something does not work

If I click "Help" and then search "expand" it will show me where expand is. But in CS6 when I clicked it the command would go through and pull up the page to expand pixels. Instead, I have to go find it. It works in every other Adobe app I use except Photoshop CC.
I am on the latest version and on CC

Hi Peter
Thanks a lot for your help (and sorry for not having answered quicker, but my boss gave me a more urgent task last week...).
Anyway, I did what you suggested (re-importing into a brand new project), and then the search for synonyms really worked! But, being a sceptical person, I did the same with another project, and with that one, it did not work. So, what I did next was compare all the settings of these two projects, and I found a difference.
RH8 now contains a function that's called 'Teilzeichenfolgensuche' (I don't know the English expression, but have a look at the attached picture: this is a screen shot from the second page when I generate WebHelp). After having done several tests, I came to the following conclusions:
Search for synonyms does not work in HTML-Help, but it does work in WebHelp (and maybe others, but they are not relevant for me, so I did not test them);
Search for synonyms does only work, when the function 'Teilzeichenfolgensuche' is NOT activated.
Could maybe somebody test this, too, and post here whether my conclusions are really correct?
Btw: This fact is not mentioned in the RH-Manual; actually, this function 'Teilzeichenfolgensuche' is not even mentioned there (at least not in the German edition)!!!
Can hardly wait to see your feedback; thanks again for everybody's support!
Kurt

Imqobjmgr does not recognize the value of java.naming.provider.url property

On Windows, I am running imqobjmgr 4.3
when I run imqobjmgr -i list.properties, I am getting the following error
Error [A3052]: imqobjmgr does not recognize the value of java.naming.provider.url property.
Why is that?
classpath
C:\Sun\SDK\imq\lib\jms.jar;C:\Sun\SDK\imq\lib\imq.jar;C:\Sun\SDK\imq\lib\fsconte
xt.jar;.
contents of list.properties
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
# Copyright 2000-2008 Sun Microsystems, Inc. All rights reserved.
# The contents of this file are subject to the terms of either the GNU
# General Public License Version 2 only ("GPL") or the Common Development
# and Distribution License ("CDDL") (collectively, the "License"). You may
# not use this file except in compliance with the License. You can obtain
# a copy of the License at https://glassfish.dev.java.net/public/CDDL+GPL.html
# or mq/legal/LICENSE.txt. See the License for the specific language
# governing permissions and limitations under the License.
# When distributing the software, include this License Header Notice in each
# file and include the License file at mq/legal/LICENSE.txt. Sun designates
# this particular file as subject to the "Classpath" exception as provided by
# Sun in the GPL Version 2 section of the License file that accompanied this
# code. If applicable, add the following below the License Header, with the
# fields enclosed by brackets [] replaced by your own identifying information:
# "Portions Copyrighted [year] [name of copyright owner]"
# Contributor(s):
# If you wish your version of this file to be governed by only the CDDL or
# only the GPL Version 2, indicate your decision by adding "[Contributor]
# elects to include this software in this distribution under the [CDDL or GPL
# Version 2] license." If you don't indicate a single choice of license, a
# recipient has the option to distribute your version of this file under
# either the CDDL, the GPL Version 2 or to extend the choice of license to
# its licensees as provided above. However, if you add GPL Version 2 code
# and therefore, elected the GPL Version 2 license, then the option applies
# only if the new code is made subject to such option by the copyright holder.
# @(#)list.properties 1.11 07/02/07
# This property file will list administered objects
# Version of command file
# NOTE: This is not the version of the Sun Java(tm) System Message Queue product
version=2.0
cmdtype=list
# If you want to only list a particular type of administered
# object, uncomment the following line and specify the type.
# Acceptable values for the type property are: t, q, tf, and qf,
# where t = topic, q = queue, tf = topic connection factory, and
# qf = queue connection factory.
#obj.type=
# To use the LDAP service provider implementation from
# Sun Microsystems, uncomment the following two property lines
# and set the url property correctly.
objstore.attrs.java.naming.factory.initial=com.sun.jndi.ldap.LdapCtxFactory
objstore.attrs.java.naming.provider.url=ldap://localhost:389/ou=imqobjmgr,o=sun.com
# To use the File System service provider implementation from
# Sun Microsystems on Solaris, uncomment the following two
# property lines and set the url property correctly.
# *** Note that the url syntax here is platform specific. ***
#objstore.attrs.java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory
#objstore.attrs.java.naming.provider.url=file:///home/foo/imq_admin_objects
# To use the File System service provider implementation from
# Sun Microsystems on Windows, uncomment the following two
# property lines and set the url property correctly.
# *** Note that the url syntax here is platform specific. ***
#objstore.attrs.java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory
#objstore.attrs.java.naming.provider.url=file:///C:/imq_admin_objects
#objstore.attrs.java.naming.security.authentication=
#objstore.attrs.java.naming.security.principal=
#objstore.attrs.java.naming.security.credentials=

I see you're using Sun Java System Message Queue. There's a forum specific to that product over at [http://forums.sun.com/forum.jspa?forumID=711&start=0|http://forums.sun.com/forum.jspa?forumID=711&start=0] . You could try asking there.
Nigel

[SOLVED] database file for multilib does not exist

Hey guys I ran into a problem today when I tried to install the proper packages I needed to use my wifi card. However when I tried to install it it gives me the error "database file for multilib does not exist" I can t seem to find out why I even tried chrooting into it and installing it that way with no luck. The package I tried to install was "pacman -S wireless_tools netcfg" thanks for the help guys you've been great.
Last edited by bdawg (2012-09-18 22:57:17)

bdawg wrote:
Ok so the whole output is as follows:
Warning: database file for 'multilib' does not exist
Error: failed to prepare transaction (could not find database)
And my Pacman.conf is blank
pacman.conf and Pacman.conf (with capital 'P') are two different files. Double-check this.
Are you running a 64-bit system?
Your /etc/pacman.conf should look like this: https://projects.archlinux.org/pacman.g … an.conf.in but with some repositories configured: https://wiki.archlinux.org/index.php/Pa … positories
Last edited by karol (2012-09-18 22:13:59)

Getting 'taglib directive for "f" does not exist or TLD is not found'

Hi,
I'm using Eclipse 3.4 and when I open my JSF page in Eclipse, I'm getting red "x"'s next to my JSF directives. For example,
<f:view>
has a red "x" along the left margin and when I roll over it, it gives me the error, 'taglib directive for "f" does not exist or TLD is not found.' This is odd because I have the appropriate directives, including
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
at the top of my page. Strangely, the "<%@" portion appears in red. Does anyone know how I can get Eclipse to recognize the listed directives?
Thanks, - Dave

Hi, I went to the link
http://java.sun.com/javaee/javaserverfaces/download.html
but following the steps only got to a place where I could download JavaServer(TM) Faces Specification Maintainance Release -- jsf-1_1-mr-spec.pdf. I did not see anywhere on here where I could download the actual jsf-api.jar or jsf-impl.jar files.
Any further clarification you can provide is appreciated, - Dave

The receipt corrections form for PO does not recognize LPs

Similar Messages

Maybe you are looking for