The recovery mode is missing and now i can't install the software , what can i do?
The recovery mode is missing , what i can do to acces again, becalisme now i can'T install the software
If you got the Mac new before July 20, 2011, call AppleCare for the original discs.
If you got the Mac new before March 15, 2010, get the 10.6 retail installer disc from the http://store.apple.com/
If you got the Mac new after July 20, 2011, boot with command-R.
If you have no backup, get a data recovery tool as the hard drive may be failing if command-R doesn't work and the aforementioned solutions don't help.
If it doesn't work but have a backup, you may need to get a new hard drive, or repair the directory with a tool such as Alsoft Disk Warrior.
Similar Messages
-
ok guys i need help anyone with my ipod it froze during an update now it will not work at all i ahve put it into the recovery mode or dfu and it will not reset it self it comes up with an error message 1603 the number is and says the ipod cannot be reset anyone please help me i have tryed everything googled you tubed everything
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts. -
Not very user friendly! Where is the place to report a problem!? I have been billed for an in-app purchase but not had the goods - I received an error message telling my I hadn't been charged at the time and now it is on my bill! What can I do?
You can try contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymor
I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymore. My computer doesn't want to read it anymore. I want to mention that I also tried on some other computers and still the problems continues. How can I solve this? On the Adobe webpage I can't find anymore the download for Adobe CS4. Thanks. Marius Lupu
You can download the software from http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html and can serialize it with the serial number you have.
NOTE:- READ THE INSTRUCTION PROPERLY TO AVOID ANY ERROR. -
when i am trying to restore my iPhone 5s from the recovery mode,it always stuck when restoring iPhone firmware. The message said " an unknown error occurred (1)". Tried all reboot, restart the iTunes etc. no luck
we have same problem bro .. i dont know what to do.
-
I have an ipad mini that won't power on. It was turned off to charge overnight. In the morning it was warm and now won't turn on no matter what I do. I've tried resetting using the power / home button combination and nothing works.
If you have owned the device, as in purchased from Apple, less than a year then there will be no charge to repair, or most likely, replace the device. If you have had the device more than a year you will be charged an out of warranty cost for replacement ($219 I think) and that is much cheaper than a new device. If you have Applecare+ then you have an additional year of coverage and the replacement will be $49 or $79 depending on when you got the Applecare.
-
I've just reformatted my pc, reinstalled master collection cs5, and now it won't install the updates it downloaded, do we have any fix for this?
you can update manually, http://www.adobe.com/downloads/updates/
-
My I Phone 4 keeps putting me on hold or mute or hanging up on me from my face touching the screen. returned one phone and now my replacement is doing the same thing. this is crazy. my iphone 3 didn't do this! the screen is suppose to turn black when it is near my ear so that you can not do this and then turn on again when you pull it away. This phone is not doing this.
Are you using a case around your phone? If yes, did you make sure the proximity sensor is not covered?
Try without the cover to make sure the sensor is working.
A protection film on your screen can also cover the sensor and result in a dysfunction of the sensor. -
I did the SMC reset for my iMac intel-based and now it won't turn on. What can I do to fix this?
Well, first things first... is the power cord fully plugged into the back of the iMac (and the wall, for that matter)?
Make sure the wall outlet has power, too... I've scratched my head over stupid issues where I forgot to flip a wall switch.
If the outlet does have power, then try doing a pram zap. Command + option + P + R (hold those at startup).
If the machine is receiving power, you should be able to see some LEDs if you look through the bottom grate of the machine to the left of the RAM door. -
HT1349 I updated my IGO primo, and now it doesn't work at all. what can you advise me
I updated my IGO primo, and now it doesn't work at all. what can you advice me now?
If it's stuck on the Apple logo, you'll have to force it into recovery mode and restore it. See http://support.apple.com/kb/ht1808.
-
I downloaded the newest version of iTunes and now my iPhone won't work. What should I do?
I downloaded the latest version of iTunes and now my iPhone won't work properly. What should I do to try to fix this? Should I uninstall the new version and if I do, what version should I install. I am using Windows 7 and iPhone 4S.
Welcome to Apple Support Communities
They are different problems because I doubt that iTunes has been able to modify Mail, that has nothing to do with iTunes.
As you are running 10.7.4, download and install OS X 10.7.5, the most recent Lion version > http://support.apple.com/kb/dl1582 After installing the update, you should be able to run Mail -
I have installed the new OS X Yosemite on my macbook pro and now my FaceTime is causing problems. I can make and receive calls, the recipient can hear me, but I can't hear them. All I can hear is a crackling noise. The speakers work fine for everything else.
Got the same problem – even after the upgrade to OSX 10.10.1. A restart usally helps. Even though the calls sometimes drop I got no crackling noise problem on iOS, though.
-
I have installed the new OS X Yosemite on my macbook pro and now my FaceTime is causing problems. I can make and receive calls, the recipient can hear me, but I can't hear them. All I can hear is a crackling noise. The speakers work fine for everything else. Help, I need this functionality to speak to family.
Got the same problem – even after the upgrade to OSX 10.10.1. A restart usally helps. Even though the calls sometimes drop I got no crackling noise problem on iOS, though.
-
HT4972 I updated to my iPad and now my apps won't open. What can I do?
I updated my iPad operating system and now my apps won't open. How can I fix this?
make sure you are logined with the correct appleID
and try rebooting it -
i have disabled my phone how do i get it off cant get onto my phone at all because i need to put a passcode in and wont accept the one put in and now i have disabled it dont know what i can do to sort it out
Hi Yvonne230,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212?viewlocale=en_US
Cheers,
- Judy
Maybe you are looking for
-
Hi, Business process- Finshed goods purchases from the subcontractor,and also having own Production . Each FG having the BOM with Usage 3(Universal). With 101 E Movement type we take the stock into our unrestricted stock with ref to PO. Actually our
-
Displaced Pixel in a PDF X3 exported with InDesign CC 2014
If I export a PDF X3 and open the PDF in Acrobat there are some strange pixel errors in the images. There are a few pixel displaced about one pixel in a vertical line. If I export a PDF X4 there are no problems. Is there anybody with the same problem
-
Dear CONS The system creates an accounting document while doing T-code- MIGO . which is avaiable DOCUMENT INFO TAB IN fi document.In which table it is available that means account short text as well as value. Account short text Assignment
-
3D Banana Animation - conceptual help please!
I'm looking for some feedback concerning a 3D applet that I am about to write this week. A big thanks in advance to anyone who can help me! I am new to Java 3D, but I am looking to write a program where a "banana character" will juggle. Here is how I
-
10.4.3 upgrade & archive install = flashing question mark
I upgraded to 10.4.3 reboot, flashing question mark appears. Tried everything, PRAM zap, NVRAM reset, pull battery for a day and unplug. Reset PMU. Tried combo update. Same flashing question mark. Boot from 10.4 DVD repair permissions all the time, r