The Recovery partition and discs are not working.

hi i am using
HP dv6-6150us
My problem is that i have already prepered the HP revovery discs for my lap top and have ones revovery my pc with it. But now when i try to recover my windows threvovery partion it give my the following error showing in the below image.
but when i put the recovery dics in the cd room it give me another error .which is shown below please help me how i can restore my windows.

Hi:
If your recovery disks and partition aren't working you can try this workaround and see if you can get windows installed that way...
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Paul

Similar Messages

Keyboard and trackpad are not working, Keyboard and trackpad are not working

I'm using MBP 15" late 2008 with Maverick OS. A couple of days ago, the internal keyboard and trackpad are not working at all. I did all the troubleshooting. I even reformat it; installing the snow leopard and re-installing the maverick but no good result. I believe there's no problem with my keyboard because i can still do PRAM on my lappy. Everytime i'm booting up my MBP, it always looking for bluetooth trackpad and keyboard. I have not used those bluetooth peripherals from day 1 i've started using MBP. I just read on the internet about the same problem has happened on MBP 13" retina and APPLE fixed it by updating the software. I wish Apple will also do something for the old MBP to fix the intermal keyboard and trackpad problem.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

What version of Mac OS X?
What home page?
What browser?

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh.

Allt he links in the header of any websites are not working, I reinstalled fiorefix and it s the same. No problem in others browser. the tool bar is working but not the link sinside the web page located between the top 300px height

all the links in the header of any websites are not working, the cursor is not changing into pointer and no way to click on any link located at the top of any website page. I reinstalled firefox and it s the same. No problem in others browser. the tool bar is working but not the links inside any web page located between the top 300px height.
So I can t tlog into any website, i cant write an email as the compose button is located in the top of the page.. Please help, i have all my bookmarks into my firefox...

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I HAD AN IPHONE AND DOWNLODED MANY PAID AND FREE APPS.MY IPHONE AND LAPTOP ARE NOT WORKING NOW.HOW DO I DOWNLOAD THE APPS INTO MY NEW LAPTOP SO THAT I CAN SYNC WITH MY NEW IPAD

I HAD AN IPHONE AND I DOWNLOADED MANY PAID AND FREE APPS FROM ITUNES STORE.NOW MY IPHONE AND LAPTOP ARE NOT WORKING.HOW DO I GET THESE APPS INTO MY NEW LAPTOP SO THAT I CAN SYNC WITH MY NEW IPAD

How to redownload purchased apps from the App Store

I was working on my 96page catalog with over 2000 photos and out of the blue my frame edges vanished even on the paste board and they are not hidden and are on

I was working on my 96page catalog with over 2000 photos and out of the blue my frame edges vanished even on the paste board and they are not hidden and are on

You won't see the frame edges if you are in Preview mode, so you should use Normal mode if you want to see them. You can turn off the Document Grid in the View menu (View>Guides & Grids>Hide Document Grid).

My iPad 2 started to backup iCloud and its now locked up. How do i unlock it, the button for settings and close are not working. What can I do?

my iPad 2 started to backup iCloud and its now locked up. How do i unlock it, the button for settings and close are not working. What can I do?

Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

PERFORMING FULL RECOVERY WHEN THE RECOVERY CATALOG AND CONTROLFILE ARE LOST

제품 : RMAN
작성날짜 : 2002-05-30
PERFORMING FULL RECOVERY WHEN THE RECOVERY CATALOG AND CONTROLFILE ARE LOST
===========================================================================
PURPOSE
Recovery Catalog와 Controlfile이 손상되었을 때 Oracle9i의 new feature인
Controlfile Autobackup을 이용하여 full recovery를 수행하는 방법을 알아본다
EXPLANATION
Catalog와 Controlfile이 모두 손상되었을 경우 full recovery를 수행할 수 있도록
하기 위해 oracle9i부터 Controlfile Autobackup이라는 New feature를 제공한다.
이 Feature가 활성화되면 RMAN은 자동으로 특정 형식(specific format)으로
controlfile을 backup한다 나중에 RMAN은 Recovery catalog를 access하지 않고도
이 backup을 인식할 수 있다. 이 형식은 "%F"라는 variable을 포함하는데
이 variable은 중요한 정보인 DATABASE ID를 포함하고 있다.
이것은 다음과 같은 CONFIGURE 명령을 사용하여 Turn-on 될 수 있다.
RMAN> configure controlfile autobackup on;
활성화시킨 후에 controlfile autobackup의 format을 변경할 수 있다. 그러나
이것은 반드시 variable "%F"를 포함해야만 한다. 그렇지 않으면 다음과 같은 Error
를 만나게 된다.
RMAN> configure controlfile autobackup format for
2> device type disk to 'c:\backups\%U';
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00579: the following error occurred at 01/31/2002 11:57:21
RMAN-03002: failure during compilation of command
RMAN-03013: command type: configure
RMAN-06492: controlfile autobackup format "c:\backups\%U" must specify a "%F"
format specifier
%F 는 RMAN이 recovery catalog 없이 backup piece를 인식하도록 Key이다.
이 Feature가 활성화 된 후에 RMAN은 BACKUP 명령을 수행할 때마다 controlfile에
대해서 별도의 backup을 수행한다. 이전에는, controlfile 은 오직 system
tablespace가 backup되는 경우에만 자동으로 backup되었다.
Database Backup은 아래와 같은 log를 출력한다.
RMAN> backup database;
Starting backup at 31-JAN-02
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=12 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00001 name=C:\ORACLE\ORADATA\PROD\SYSTEM01.DBF
input datafile fno=00002 name=C:\ORACLE\ORADATA\PROD\UNDOTBS01.DBF
input datafile fno=00005 name=C:\ORACLE\ORADATA\PROD\EXAMPLE01.DBF
input datafile fno=00006 name=C:\ORACLE\ORADATA\PROD\INDX01.DBF
input datafile fno=00008 name=C:\ORACLE\ORADATA\PROD\USERS01.DBF
input datafile fno=00003 name=C:\ORACLE\ORADATA\PROD\CWMLITE01.DBF
input datafile fno=00004 name=C:\ORACLE\ORADATA\PROD\DRSYS01.DBF
input datafile fno=00007 name=C:\ORACLE\ORADATA\PROD\TOOLS01.DBF
channel ORA_DISK_1: starting piece 1 at 31-JAN-02
channel ORA_DISK_1: finished piece 1 at 31-JAN-02
piece handle=C:\BACKUPS\01DFKAIH_1_1 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:01:56
Finished backup at 31-JAN-02
Starting Control File Autobackup at 31-JAN-02
piece handle=C:\BACKUPS\C-4159396170-20020131-00 comment=NONE
Finished Control File Autobackup at 31-JAN-02
Note:
Controlfile backup은 backup의 끝에서 수행된다.
그리고 이 backup piece name의 두번째 string은 dbid이다(4159396170)
Current controlfile이 database와 함께 손실되고 Recovery catalog도 손상되어
사용할 수 없게 되었을 때 controlfile autobackup이 controlfile을 restore하기
위해 사용될 수 있다. restore된 controlfile은 db를 mount하고 datafile들을
restore하기 위해 사용될 수 있다.
Controlfile autobackup을 이용하여 full recovery를 수행하기 위해서는 아래와
같은 과정을 수행하면 된다.
1. Target instance를 위한 new init.ora를 생성한다. backup이 있다면 이것을
사용할 수 있다.
2. Startup nomount your new instance.
3. RMAN은 시작하나 어떤 connect statement도 수행하지 않는다.
4. RMAN prompt상에서 DBID를 설정한다. 만약 DBID를 모르면 controlfile autobackup
의 이름으로부터 이것을 알 수 있다.
RMAN> set dbid=4159396170;
5. Dbid를 설정한 후에 nomount로 startup한 target instance에 connect한다.
RMAN> connect target /
6. 만약에 backup이 disk상에 있고 controlfile autobackup을 non-default location
으로 지정하였다면 파일을 다음과 같은 위치로 옮겨 놓는다
ON UNIX : ORACLE_HOME/dbs
ON WINDOWS: ORACLE_HOME/database
RMAN은 controlfile autobackup을 찾기 위해 위 directory를 검색한다.
만약 controlfile autobackup location을 바꾸지 않으면 위 directory안에
backup이 생성되게 된다.
만약에 backup이 tape에 있다면 restore시 channel과 device를 기술하기 위해서
run block을 사용해야 한다. database가 mount되어 있지 않기 때문에
default device와 channel을 설정할 수 없다.
RMAN> run { allocate channel c_1 type 'sbt_tape'
parms "ENV=(NB_ORA_SERV=rm-wgt)";
restore controlfile from autobackup;}
7. Restore the controlfile:
RMAN> restore controlfile from autobackup;
8. Mount the database from the restored controlfile:
RMAN> alter database mount;
9. Restore datafiles:
RMAN> restore database;
10. file들을 restore한 후에 recovery를 수행할 수 있다.
이때 current online redo log가 없고 또한 backup controlfile을 사용하기
때문에 incomplete recovery를 수행해야 한다. 이를 수행하기 위해서는
"UNTIL TIME"을 설정해야 하고 open시에는 resetlogs를 사용해야 한다.
RMAN> set until time=<time stamp>;
RMAN> recover database;
RMAN> alter database open resetlogs;
REFERENCE DOCUMENT
NOTE:174623.1

BACKUP Command Behavior
ON
If the backup includes datafile 1, then RMAN does not automatically include the current control file in the datafile backup set. Instead, RMAN writes the control file and server parameter file to a separate autobackup piece.
Note: The autobackup occurs regardless of whether the BACKUP or COPY command explicitly includes the current control file, for example, BACKUP DATABASE INCLUDE CURRENT CONTROLFILE.
OFF
If the backup includes datafile 1, then RMAN automatically includes the current control file and server parameter file in the datafile backup set. RMAN does not create a separate autobackup piece containing the control file and server parameter file.
BUT Dear Mohammed,
It is not working accordingly. what I did is :-
1. I switched off the AUTOBACKUP
2. Then I took whole database backup, that means it included File # 1
3. But according to above it is going to include autobackup of controlfile and spfile in the same backupset .
4. But when I asked it to restore controlfile from autobackup it said NO AUTOBACKUP FOUND.
COULD YOU PLEASE HELP ME ONCE AGAIN DEAR.
If it works accroding to above then it should have my Autobackup.
Regards
Harpreet Singh

The MSS ECM FPM Steps are not working after the upgrade

Hi all,
The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
But this functionality was working before the upgrade.
Please let me know what should I do.
Thanks,
Sarayoodharan.K

clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 - Cleint should be 000

I got my Iphone 3gs unlocked, but Navigation and Compass are not working. Please help if anybody had faced this problem and got it resolved.

I got my Iphone 3gs unlocked, but Navigation and Compass are not working. Please help if anybody had faced this problem and got it resolved.

Only the carrier that the iPhone was locked to can unlock. There you go, hacking void any support from this forum.

Internal speakers and headphones are not working

I have hp g6 2231tx os Windows 8, brought it a month ago..now it's internal speakers and headphones are not working..I enabled in playback device from sound mixer and reinstalled drivers but still not working..it's because of hardware or software??

Hi,
It could be either Hardware or Software related, so try the following and let me know.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58517.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My headphones speakers and microphone are not working please help

hi i have had my hp windows 7 lap top for 2 years and never had a problme but recently my speakers and microphone are not working even if i put in my headphones i have installed new audio drivers checked my sound settings and did a restore to a date and a factory reset and still no sound ( my speakers say there working the geen bar goes up and down showing the volume but still no sound) please help me thanks

Hi,
Please use the following instructions to check and fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I am facing problem in playing yahoo pool in Firefox 4 while it was working fine in Firefox 3.6. In Firefox 4 the combination of mouse keys are not working properly.

I am facing problem in playing yahoo pool in Firefox 4 while it was working fine in Firefox 3.6. In Firefox 4 the combination of mouse keys are not working properly.

I updated to Firefox 4.01 today and the middle scroll button on my Lenovo T400 stopped working. I downloaded the updated Ultranav utility and the Ultranav driver for my T400 from here http://www-307.ibm.com/pc/support/site.wss/MIGR-72858.html and then uninstalled the "Thinkpad Ultranav Driver" from Add/Remove programs rebooted and then installed the updated utility and driver (another reboot) and it now works perfectly.
So glad to get this working again.

Some of the services of ITS 640 are not working

Hi All,
I have implemented SAP NW 04 SR 1 Portal and integrated SRM 4.0(EBP 5.0).I have also implemented Business Package for mySAP SRM 4.0 60.2.
I am using internal ITS for HTML GUI.
Some of the iviews of the business packages are working but some of them are not.
I am getting an error message
"The URL http://g4kwas642.corp.rwdtech.com:8050/sap/bc/gui/sap/its/bbpsc05/! was not called due to an error.
Note
The following error text was processed in the system SRM : Attribute for user PBHONDELE contains errors. Inform system admin.
The error occurred on the application server g4kwas642_SRM_50 and in the work process 0 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
Form: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
Module: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS"
I have published all the services that are under SICF.
I had also published all the services using w3_publish_services and siac_publish_all_int.
It says that all the services are succesfully published.
When I go to SICf to test the service,some of them are not working.
Can you guys tell me what are the steps that I am missing?
Thanks,
Paritosh

I am also getting the same th_res_free error..
I have installed nw04 sr1 and trying to run ESS on it.
My problem is, i have installed sap WAS 6.4 on different machine and R/3 on different machine..
So now.. where i have WAS.. does not have all the services. All services are there on R/3 server..
Now how do i publish the services on WAS 6.4??
Coz that option to publish on INTERNAL site is not coming on my R/3 (4.7) as it does not have WAS 6.4.. its on different machine.
Please tell me what can be done in this case.
I cant create a R/3 transaction iView using webgui because of this. my Web gui service on WAS 6.4 runs fine whne i test it in SICF .. but not in Iview..
Please help me out .. i dont want to install a ITS on another machine which is simple solution..

The Recovery partition and discs are not working.

Similar Messages

Maybe you are looking for