The relationship betweeb  BusinessObjects and relevent Production, CR?

Hello Buddies,
I read some document related to BOE and other products, such as CR, Xcelsius, BusinessObjects Server, Voyage, and Web/Desktop Intellignece. However, I am still confusing the relationships between BO and other Products.
Are the follows correct?
1) BOE is designed for the large company. It already includes the CR, Xcelsius, Web Integllience, and Voyage ...
2) BusinessObject Edge is for the small scale company, it can be integrated with CR, Xcelsuis, Web Integllience and voyage.
What I should install if I want to study the BO as a BI conultnat (I can get the trial version)? What is the study route to master the BO in a short period?  And which part is more close to the BI?
Thanks

Hi Jonas,
A relatively simple explanation is that the BO enterprise is one single product and other products are CR, Xcelsius, Voyager, BODI etc which are tightly integrated with BO Enterprise..
BO Enterprise encapsulate Destop Intelligence, Designer, WebIntelligence and some others.
I would recommend you to first install BO Edge which is free on SAP site at "Free Trials" and start with the below link to get hold of the user guides and start familiarizing with first the universe and then the Desktop Intelligence/Web Intelligence.
http://help.sap.com/businessobject/product_guides/
I am very sure if you pick the universe first and jump on desktop Intelligence, you will be able to learn it fairly fast.
The part closest to BI is BO Data Integrator which is a ETL tool.
Best Wishes,
Pratik

Similar Messages

  • Can we unlink the relationship between Customer and Opportunity?

    Hi Experts,
    I have an opportunity type field in Opportunity to differentiate customer and non-customer. There is a situation when I create an opportunity from customer, the opportunity is tie with customer even the opportunity type is non-customer. How do I remove the relationship between customer and opportunity if the opportunity type = non-customer and I want remain the relationship if opportunity type = customer? I have tried on workflow, but it's seems not working as the system not allow me to modified the relationship.
    Please advice. Thanks

    Hi Bob,
    You are right, we can hide the Customer Name from the layout. But this is not what I want because at the back-end the Opportunity are still tied with the Customer and it will still be shown in the Opportunity section of Customer. If we show the Customer Name in the layout, the value are still there. I will like to take out the relationship between Customer and Opportunity if Opportunity Type = Non Customer. Meaning that Non Customer Opportunity will not tie with any customer.
    Please advice. Thanks

  • What the relationship between eul4_documents and eul4_objs

    we use discoverer administration to creat folder. then we create workbook in discoverer desktop from available folders . now i want to write a sql to show the the relationship between folder and workbook. as i know , i can find folder in table eul4_objs and workbook in table eul4_documents . but how to link them together?
    For example , i know folder A. how can i find the workbooks which created from folder A only by using SQL

    Hi,
    Instead of EUL5 use EUL4 in this query.
    select distinct doc_name, obj.obj_name folder_name, bas.ba_name
    from eul_us.eul5_documents doc
    , eul_us.eul5_elem_xrefs xref
    , eul_us.eul5_expressions exp
    , eul_us.eul5_objs obj
    , eul_us.eul5_ba_obj_links bol
    , eul_us.eul5_bas bas
    where xref.ex_from_id = doc.doc_id
    and doc.doc_name = &your_report
    and xref.ex_to_id = exp.exp_id
    and obj.obj_id = exp.it_obj_id
    and bol.bol_obj_id = obj.obj_id
    and bas.ba_id = bol.bol_ba_id
    Hope it helps you.
    Best Wishes,
    Kranthi.

  • What is the relationship between BASIS and XI?

    what is the relationship between BASIS and XI?
    whether we have to acquire knowlege to explore BASIS for XI

    HI Gabriel
    BASIS is the administration of SAP system, BASIS team will be responsible for installation, maintenance, transport, authorizations in the SAP system.Taking care of the Server in all the situation,applying Support Packages, patches,fixes, Monotioring the Jobs.Participate in requirements gathering, assessment, design, configuration and testing activities for SAP security and other issues
    XI is also a middleware.
    The work of XI Basis starts from installation of XI server and it inculdes many system related things such as Installing Adapter framework, Maintaining RFC connections, Roles and Authorization, Updating Patches etc....
    Check this link on Management of XI and go through it completely. You will ahve clear idea about the role performed by XI Administrator or XI Basis:
    http://help.sap.com/saphelp_nw04/helpdata/en/a3/c6d931767dbb4d8a2696b9c72431a9/content.htm
    Also refer this thread on XI Basis work:
    Basis activites for XI
    Cheers..
    Vasu
    <b>** Reward Points if found useful **</b>

  • What's the relationship between Flex and AIR?

    What's the relationship between Flex and AIR?
    I only know that Flex is a Framework and the AIR is a runtime,
    Can any one tell me more about these two object in detail,thanks a lot!

    AIR is a runtime that supports a superset of the Flash Player API. You use it to run mobile and desktop applications, as opposed to browser apps.
    Flex is a set of technologies for building either AIR apps or browser apps. It includes a framework of runtime classes (e.g, Button, DataGrid, etc.) to use in your applications, an SDK with a command-line compiler, and an IDE called Flash Builder (formerly Flex Builder) that supports intelligent editing, a design view, and a debugger.
    So, a brief statement of their relationship is that you can use Flex to build AIR apps.
    Gordon Smith
    Adobe Flex SDK Team

  • How to easily find all the relationship between group and reports in OBIEE

    Hi, All:
    I am working with a production env which contains many group and reports.
    I want to know if there is a quick way to export the relationship between all the group/users and all the reports/page/etc.
    Thank you for the kind help.

    Thanks so much !
    May be you can suggest a way around what I trying to achieve. I migrated(imported) one BA from our Prod system to an R12 VIS demo system into the pre-existing APPS EUL as owner SYSADMIN. When I login as SYSADMIN I see all the workbooks(the ones that were migrated from PROD and the ones shipped with VIS). I am interested only in the Workbooks that I migrated from Prod System. There are 100's of migrated workbooks. I was thinking of creating another APPS user and grant this newly created user ADMIN privileges on the migrated BA and transfer ownership of all migrated WORKBOOK. This way when I login as the newly created user I will only see the migrated Workbooks. How do I automate the process to seperate them using SQL or otherwise
    Thanks
    Bismi

  • Which table keep the relationship of AO and Usage

    Hello Guru:
    which table keep the relationship of Architecture view and Usage view.
    for example, this architecture object was used to create business entity.
    Please advise and thanks in advance.

    Hi,
    it's table VIBDOBJREL that keeps the relationship.
    Regards, Franz

  • LUV the Adobe Muse Team and AMAZING Product!! One thing, why isn't the new demo 'mobile friendly'?

    I've made a few sites that included a custom mobile version like http://MilanFraneta.com and was so jazzed when I justsay the amazing, clean, parallax flowing new 7 demo and went to check to see how equally amazing I was sure it would be on my iphone5S and most the content missing, blank, off center... like whaaaaat??
    Just very surprised (and disappointed).  Uh, give me a Holla if you want me to make a version for you!$
    Thank YOU For All Else and the Continued incredible work, talents, and Advancements!!  PLZ Keep ROCKIN Those!
    BEST and SO Much respect and appreciation, truly!
    -Sterling Williams

    ?? Whoa... Looks great/as I'd expected now... ha You're one of the last company/products I would ever want to post anything negative about... just pulled up fine, flowing, smooth on my ios7 (before it wasn't responsive and maybe 15% of the content was there, the rest was blank and wouldn't scroll.. I promise!)  I am a HUGE fan of Muse and all you are doing and continue to keep improving, #Parallax ROCK$! http://SterlingWilliams.com/custommobile a sample from your awesomeness
    Apologeez and I can delete this post is best, but there was a hickup, maybe was just on my end for some reason
    LUV YALL!! and SO grateful for ALL you bring to Me, Us, Creative Cloud and the World!!
    -Sterling aka 'The Web Stylist'

  • What's the relationship between Agent and JMX-instrumented applications?

    Hi, I'm a beginner of EM and JMX. I'm trying to integrate my application with EM. After reading some documents, I find I need to make my application JMX-instrumented first and then design the plug-in. But I'm still a little confused about the relationship between the Agent and the JMX-instrumented appliactions.
    Here is what I'm confused:
    1. Should the EM Agent be installed in the host where my JMX-instrumented application is installed? If this is true, then that will mean Agent cannot monitor the remote resource. But it sounds not reasonable.
    2. When making the application JMX-instrumented, we should use the platform MBeanServer or create our own MBeanServer? Do they have a major difference? and will it impact the plug-in design?
    Thanks in advance.

    Answers to your queries:
    1. Should the EM Agent be installed in the host where my JMX-instrumented application is installed? If this is true, then that will mean Agent cannot monitor the remote resource. But it sounds not reasonable.
    Its not necessary that EM Agent should be installed on the same host where JMX-instrumented application is/are installed. EM Agent has a fetchlet (named OJMX) that can be used. Refer to [Management Using Web Services and JMX|http://download.oracle.com/docs/cd/B19306_01/em.102/b16246/web_jmx.htm] for more details on emjmxcli tool, which can help to build the plug-in which can monitor the MBeans. [EM Extensibility Guide|http://download.oracle.com/docs/cd/B19306_01/em.102/b16246/toc.htm] contains all the details for building a plug-in.
    2. When making the application JMX-instrumented, we should use the platform MBeanServer or create our own MBeanServer? Do they have a major difference? and will it impact the plug-in design?
    To best of my knowledge, plug-in design doesn't get impacted

  • What is the relationship between iPhoto and my pictures ?

    I hope you don't mind if I pose another question to you: one that's been bothering me for some time. It has to do with iPhoto and storing photos in general. So far I have been placing my photos in >my mac>my pictures and then working through iPhoto to sort them into categories, events, etc. So far, so good, but I don't understand the relationship between the two. For example, I can create new folders in iPhoto, but that doesn't change my original folders in my pictures at all; so where are the iPhoto folders on my mac? And if I delete from >my pictures, then does that also automatically delete them from iPhoto, or visa versa? The set up that I would ideally like to have is that everything I do in iPhoto automatically updates my actual photos in >my mac>my pictures. Is that possible? Or am I going about this the wrong way? Your input would be appreciated. Thanks. Adrian

    You're going about it the wrong way
    iPhoto is a Database. The entire point of it is that you can manage your photos without recourse to your files. This is more powerful and a whole lot more flexible than files in folders.
    iPhoto can run in two modes: Managed and Referenced.
    In Managed (the default mode) your photos are copied into the iPhoto Library when you import them. I would strongly suspect that this is the case in your set-up. This is the best way to run iPhoto.
    It also means that you now have two copies of the photos - on in the iPhoto Library, the other in your Pictures Folder. (And by the way, there's no "my pictures" folder on a Mac. It's just the Pictures Folder. I'm always amused by the "my" prefix on WIndows folders. Who else's files would they be? If they belong to someone else, shouldn't you have a "their" Pictures Folder too? Any enough of a pointless digressions)
    In Referenced mode iPhoto does not copy the files into the LIbrary. It simply references them where you have put them. I'll add a bit to the end of this post explaining some of the gotchas with this mode.
    How can you tell if you're running a Managed or a Referenced Library? Go to iPhoto -> Preferences -> Advanced. Is the box at Copy Items to the iPhoto Library checked?
    As iPhoto is a database there is
    a: No relationship between the photos in your Pictures Folder and iPhoto if you have a Managed Library
    b: Minimal relationship if you have a Referenced Library.
    For example, I can create new folders in iPhoto, but that doesn't change my original folders in my pictures at all; so where are the iPhoto folders on my mac?
    They are entries in the iPhoto database.
    And if I delete from >my pictures, then does that also automatically delete them from iPhoto,
    Again: depending on whether your Managed or Referenced:
    a: Managed: No it does not, makes no dfference to iPhoto at all.
    b: Referenced: You've just corrupted your iPhoto Library.
    When you use iPhoto it's your "Go To" app for photographs. The point is that you don't manipulate the files in the Finder any more. You use iPhoto to import, iPhoto to organise, share and so on, you use iPhoto to Delete too.
    or visa versa?
    Managed: Deleting from iPhoto also removes the files from the HD.
    Referenced: Deleting Files from iPhoto only removes those elements within the iPhoto Library. You then need to trash the original file yourself. Why? When you elected to Reference the files you said to iPhoto "I want to manage the files myself" So manage them.
    The set up that I would ideally like to have is that everything I do in iPhoto automatically updates my actual photos in >my mac>my pictures. Is that possible?
    That's not possible. That's file organising, and as I said, iPhoto is about Photo organising. Albums, Folders, Slideshows etc in iPhoto are all virtual, that is they are entries in the database. The advantage of this is that a photo can be in 50 albums and use no extra disk space at all. Also, iPhoto has no ability to manage files outside the iPhoto Library Folder.
    So how do you actually get to your files if you want to email, upload etc?
    There are many, many ways to access your files in iPhoto:
    *For Users of 10.5 and later*
    You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    (Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
    You can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    *For users of 10.4 and later* ...
    Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    *If you want to access the files with iPhoto not running*:
    For users of 10.6 and later:
    You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
    For Users of 10.4 and later:
    Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    *To work with another editor*
    You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
    Note that iPhoto sends a copy+ of the file to Photoshop, so when you save be sure to use the Save command, not Save As... If you use Save As then you're creating a new file and iPhoto has no way of knowing about this new file. iPhoto is preserving your original anyway.
    Finally +On Running a Referenced Library:+
    *How to do it:*
    Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
    *What Happens:*
    Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
    *Some things to consider:*
    1. Importing and deleting pics are more complex procedures. You have to to put the files where they will be stored before importing them. When you delete them you'll need to remove the files from the HD yourself.
    2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
    3. Most importantly, migrating to a new disk or computer can be much more complex.
    4. Because iPhoto has no tools for managing Referenced Files, if, for some reason, the path to the photos changes then you could find yourself resolving aliases for +each photo in the Library+ one by one.
    My own opinion:
    I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organiser
    I know there's lot there, so by all means post back if you need more
    Regards
    TD

  • What's the relationship between OAAD and J6NA?

    Some OPENTEXT added txns such as J6NA, J6NP and J6NY are used to access documents
    SAP built-in txn OAAD is for the samething?
    If not, what is the difference?
    Thanks!

    Hello Ajay,
    you can use OAAD to check any documents that have been archived to an OT Archive Server for example -
    J6NA is for the administration and configuration of Doculink. There's no direct relatioship between both transactions.
    For general Doculink questions, I would recommend to post your questions in the Open Text Discussion Forum "ECM Suite for SAP":
    https://knowledge.opentext.com/go/17324886 (you need a Open Text Knowledge Center account for accessing the link)
    or having a look into the Open Text Archiving and Document Access for SAP Solutions Scenario Guide

  • How to establish the relationship between component and character

    Hi Gurus,
    I'm using MTO with configurable materials,
    I have create class, character, configurable profile, 
    then i create a sales order using VA01, i enter the FG, and choosed the charaters, but the components do not populated.
    Do you know how to make all components can be populated automatically after the characters are chosen.
    Regards,
    Dragsky

    Hi ,
    Thank you for your response!
    My usage is 1 -production
    Relevant to sales is ticked in CS02
    There is a material A which is working well, i copied material B form A and copied BOM from A.
    so now , i choose Obj.dependencies in BOM item, a message pops up saying:
    Used more than once - can only be maintained centrally
    Message no. CU032
    Diagnosis
    You want to change global object dependencies locally for an object. However, this is not possible, as the object dependencies are allocated to other objects as well. For this reason, you can only change the dependencies globally using dependency maintenance functions.
    Procedure
    Change the object dependencies globally in the dependency maintenance function.
    Regards,
    Dragsky

  • I need to upgrade from Safari 5.1.10.  I went to the bestbuy site indicated and that product is no longer available.  What else can I do?

    I need to upgrade from Safari 5.1.10.  Went t the best buy site you indicated but that product is no longer available.  Now what do I do?

    What model MacBook Pro and what version OSX do you have?
    Safari is download as an update to OSX.
    It maybe yo have to update OSX version to get the latest Safari version.
    SOme model Macs can be updated to latest version of Safari/OSX since the hardware does not support it.
    BTW this is the Mac Pro desktop forum

  • Costing errors at the time of  creating and confirming production order

    Hi friends,
    I'm in the process of setting up a controlling activity called assembly of a product (this assembly is final assembly or would result in the finished product, JOTRUCK).
    The Issue that I'm facing is, the system is not capturing costs.
    i.e., it is allowing the creation and confirmation of production orders, however with a warning message which says costing errors.
    Steps that I've completed (from controlling end):
    1. defined primary cost elements
    2. defined secondary cost elements with category 43.
    3. defined a cost center.
    4. In OKB9 I've assigned a couple of cost elements.
    Please notify if there are any more steps that I need to configure for getting the right results.
    If you have any material possibly with screen shots, pls do forward the same to: [email protected]
    Regards
    Kim

    Hi,
    I hope you have carried out the following activities:
    1. Carry out standard cost estimate for the materials involved.
    2. Check KKPAN to see the cost details of the product.
    Need more details on the steps that you have carried out so far.
    Regards,
    SGP.
    P.S - assign points incase the info was useful.

  • What's the relationship of Oracle content search products?

    I'm puzzled about so many Content Search Products of Oracle, such as UltraSearch,SES(Security Enterprise Search), etc.
    What's the different?
    Thanks.

    If you have not already checked it out - try this
    http://www.oracle.com/technology/products/oses/pdf/ses_ultrasearch_faq.pdf
    Mind you for my own requirements I don't see a lot of difference - however since Ultrasearch has been relegated to maintenance only mode product and SES is actively being worked on - the gap in features is likely to grow remarkably over the near future.

Maybe you are looking for