The release indicate of procduction order is empty in table afpo

hi:
the release indicate fields of production order is empty in table
afpo, the new production order is generated after i read PP master
data .please help me analyze why the indicate isnot 1 because the
status of production order is REL.
best regards.

Hi,
When read PP master is done for a prod order in REL status, the status changes back to CRTD (created) in the order.
Regards,
Senthilkumar

Similar Messages

Want to know the release and blocked sales order status

hii..
I want to create a report that contains who blocked and who released the sales order and when he released..in which table i can get the details..please tell me where this details has been updated...

hi,
go to the SPRO settings and view the release procedure in MM and SD part in Purchasing...
you customized that part then only you can release such documents....
thanks,
<b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada Galindo

Where the release of a Sales order data is ?

Hi,
I need to find time and date when sales orders where released.
I found table VBLB, field ERZEI for time. Is this right??, what would be the correct field for date??
thanks for the help.
Mauricio

I need to find time and date when sales orders where released.
There is no release procedure for sale orders unlike PO in MM and I presume that it would have been creation date and time. If so, you may check in VBAK.
thanks
G. Lakshmipathi

The reference field between purchase order and account assignment tables

i need to reterieve the account assignemnt category (G_L_ACCT) which is in the table bbp_pdacc for an the purchase order item, i am not able to find the reference field. I am working on the SRM system.
promise to reward points
regards,
anitha

Well, the account assignment category in SRM table BBP_PDACC is ACC_CAT. If this isn't what you are looking for, could you please elaborate your requirements?
Rob

HT5714 What time are pre-orders usually available for download on the release date?

At what time on the release date are pre-orders available for download?

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. Perhaps there will be something they can do for you.
Regards.

Release procedure for Purchase orders

Hello SAP Gurus,
Can anyone explain in steps the release procedure for purchase orders and also can any one explain how it differs from Puchase requisition release procedure.
Thanks
NDS

Hi
Release procedure for Purchase orders here is process flow.
Go to spro>img>materials management>purchassing>Release procedure for Purchase orders
1. Create characterstics -Intially you will create characterstics based on which you would like to release a purchase order.
Charactrestics are like plant, purchase order value,purchase group etc.. Assign characterstics to release class 032.
2. Create Release group say 01 and create release codes like pm(project manager), gm(general manager) etcc..
3. Create a Release starategy say s1 and assign release group to it 01 and release class 032 and department to whom this release stategy applies say MM. define the order of release say first pm followed by gm etc..
4. under classfication define value limits for release of purchase order.
5. define release indicators
6. simulate the release
7. assign if there is any workflow.
hope it helps.

What is the purpose of the release status in creating condition table

hi gurus,
can you please tell me the purpose of the release status and validity date in creating condition table for pricing?
thanks,
Paul

Dear John
The release status controls in which scenarios the condition records are found.
If the status is set at 'B', for example, then the corresponding records are taken into account during a pricing simulation, but are not used in current documents.
The release status can only be maintained directly for agreements (sales deals). For condition records, this is done via the processing status.
thanks
G. Lakshmipathi

Workflow in the releasing of Credit blocked sales orders.

Hi All,
My Client requirement is that they need workflow in the releasing of credit blocked sales orders.
If once sales order is blocked then it should be approved at 3 levels, then only it should be released.
Suggestions are highly appreciated
Regards,
Kumar

Hi Kumar,
I think you can achieve this by using Authorization Concept.
Please find the below link
http://help.sap.com/saphelp_nw04/helpdata/en/52/671285439b11d1896f0000e8322d00/content.htm
Authorization levels for Credit Rep Groups
Thanks
Dasaradha
Edited by: dasaradha ramireddy on Nov 28, 2011 12:53 PM

The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix?

The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix? I'm not able to roll back to the prior version, so I'm stuck in limbo.

There have been a number of problems with installing the latest iTunes on Windows 7 64-bit machines during the last couple of weeks. You might want to do a search on that topic and see if anyone has a solution. There have been various versions of the problem but a lot related to errors in the download package or failure to download.

Problem in reversing the released Process order.

Hi PP Gurus,
When I'm trying to reverse the Process order release in change process order COR2 system is not allowing me as the menu option is Gray. When I released processed order Control recipe is generated and due to some problem in PI sheet I discarded in CO60 transaction code. So can anybody please tell me how to handle this situation? I mean is this can be resolved by configuration or enhancement?
Thanks & Regards,
Abu Arbab

Hi Krishna,
Thanks for reply.
Now tell me what should be the approach we if we don't want to delete the Process order? Say PI sheet is created and sent to it's destination through Background job and later we found some error in PI sheet so and we've discarded that PI sheet. In case when I don't want to delete or Teco Process order, what will be the process in this case?
Thanks & Regards,
Abu Arbab

Revoke release of Plant maintenance order after change is done to the order

Hi
I need to know if thorugh some configuration I could enable the feature which revokes the release of a plant maintenance order after certain change is done to the order. Please help.
Thanks,
Ankbat

hi
you cannot revoke the status of released after changing the order. you can explore the use of user status profile
regards
thyagarajan

Cheating the Released date in order to be listed on top

My book is in the iBookstore, just released this week. But if you search by "Released Date", it doesnt show up in the first 100 listings. The first 100+ listings are publishers who are cheating the release date, putting things like January 5, 2025, or several December 2013 or 2014 dates in order to show up at the top of the list. I have emailed itunesconnect about this, but no answer so far.

And how is the phone supposed to know if it's you or a thief pressing the Sleep/Wake Button and sliding to power off?
You want a passcode required to power off the device? So... what if you forget your password? What then?

When I download a podcast on my iPhone why is the release date missing? This really screws up the sort order.

when I download a podcast on my iPhone why is the release date missing? This really screws up the sort order.

Hello yung ron,
It may be that your iPhone's set to sync automatically, which can potentially remove any music that's been added to the device. It may help to set the device to 'manual mode,' so that you have complete and total control over what content is on the device.
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1535
Cheers,
Allen

Wat is the procedure to make a release strategy in sales order ?

wat is the procedure to make a release strategy in sales order ?

Dear all:
my request is :
when the sales order are saved(VA01) and it is not approved ,it can't make to MD04,
if the sales order is approved,then can make to MD04.
I user Status Profile to do it,
I have set a user Status Profile in sales order header and item by BS02, in the user Status Profile i have two status A00 and B00,I need a business transaction to set in the status A00 ,
but i don't know which business transaction can settle my problem.
Acct. assignment order/project
Activate final billing doc.
Actual activity allocation
Actual overhead (periodic)
Actual settlement
Automat. WIP/results analysis
Change configuration data
Complete
Confirm order
Create billing document
Create changeable copy
Create delivery
Create inquiry
Create quotation
Create sales document

User exit for the release of Purchase Order

Hi Friends,
I am searching for a user exit which should trigger at the time of Purchase Order release in ME29n transaction.
If anyone can help me for the same....!!!
I need the exact exit which triggers at the release of PO....
Points will be rewarded for the needful replies.
Regards,
Mandeep.

HI,
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program
USE THIS PROGRAM TO GET ANY USER EXIT BY GIVING THE TCODE.
MMFAB001            User exit for generation of release order
MRFLB001            Control Items for Contract Release Order
REGARDS,
PRIYA.
Edited by: Priyadharshini Veluswamy on Mar 13, 2008 9:21 AM
Edited by: Priyadharshini Veluswamy on Mar 13, 2008 9:40 AM

The release indicate of procduction order is empty in table afpo

Similar Messages

Maybe you are looking for