The Remote App on my iPhone no longer works with my Apple TV 1st Gen

I don't use it that often but when I want to, I want to...u know how it goes. Since one of the updates for the Remote app on the iPhone it no longer "sees" my 1st gen Apple TV, any ideas or am I SOL? Apple TV 1st gen doesn't do homesharing does it?

there used to be a dark gray "pad" area on the display of my phone in the remote app that I could use kinda like a track pad to move around the menus on the appletv, u could tap it, swipe it etc, that's gone cause it no longer sees my apple tv library, I can't find the library on the apple tv, is that cause homesharing isn't available and it only sees things thru homesharing?

Similar Messages

  • Can I use the remote app on my iphone to link with the ipad2 ?

    Can I use the remote app on my iphone to link with the ipad2 ?

    This is to control the music library to be more specific.

  • HT1947 Can I control the volume of my MacBook Pro with the remote app on my IPhone or IPad?

    Can I control the volume of my MacBook Pro with the remote app on my IPhone or IPad?

    Welcome to the Apple Community.
    To an extent yes. You can't control the master volume, but tou can turn the volume up and down, up to the maximum set manually on your computer.

  • HT1947 After updating My Apple TV to 5.1 I can browse music library using the Remote app on my iPhone and iPad but cannot select a song to play. Is someone else having the same problem?

    I have updated my Apple TV to 5.1. Using the Remote app on my IPhone and iPad I can browse the music library on the Apple TV but I cannot select a song to play. Has someone else the same problem?
    Mats

    I think I found the reason. On my iMac that is hosting the music library a song already was playing. This seems to block out me from selecting another song though my Apple TV.
    Mats

  • HT1947 Does anyone else have my problem with atv3? Plays films in iTunes without any problems but on music every time I use the remote app on my iPhone 3GS it stops playing after around 5 tracks in. Anyone having this problem?

    Does anyone share my problem with atv3 I can play films through iTunes without any problems. When I start playing music using the remote app on my iPhone 3GS after around 5 tracks in it just stops playing and seems to lose my connection. Hoping this is human error on my part?

    I think this is probably a sign that your network could be better than it is.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

    I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

    I think this is probably a sign that your network could be better than it is.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • Recently bought MacBook Pro and I open the remote app from my iphone but unfortunately my macbook keyboard got freezes .how can any advise

    Recently bought MacBook Pro and I open the remote app from my iphone but unfortunately my macbook keyboard got freezes .how can any advise

    Post in the iPhone forum and or in the iTunes forum. This is the MBP hardware forum.

  • The remote app on my phone won't connect to my Apple TV. In can use AirPlay.

    I Cant get the remote app on my iPhone 5s to connect to the apple TV. The AirPlay is working fine. I have switched the Apple TV off with no help.

    Hi Chris,
    The article linked below details a number of troubleshooting steps that can help get the Remote app to successfully connect to your Apple TV.
    Remote app for iPhone, iPad, or iPod touch can't connect to iTunes or Apple TV
    https://support.apple.com/en-us/HT201397
    Sincerely,
    Allen

  • My iPhone no longer works with my wi-fi network.  It detects the network but can't communicate, even though it did so until today for months.

    My iPhone no longer works with my wi-fi network.  It detects the network but is unable to communicate, even though until today it worked great for months.  The network is Verizon FiOS Internet on an M1424WR router.  PCs and iPad continue to work with the same network without any problem.  Any ideas?

    have you upgraded to the new ios5 software? if so that could be the issue and contact apple.

  • Does the "Nike+" Work With An "iPod Touch 1st Gen"

    Hii
    I was wondering if the Nike+ Running software will work with my iPod Touch 1st Gen Firmware 2.1??
    As i read somewhere and a Pro of this firmware they said was with the Nike+iPod integration
    Could someone get back to me as i want to try and use it soon
    Thanks
    George

    Chbord wrote:
    I have bought my G1 touch two weeks before the G2 and now I'm left out. I have a nano from 2006 and I simply put the dongle in it and it's working fine. The nano doesn't have a bluetooth internal receiver, that's why you plug the dongle.
    It that is the only thing you need the receiver for, why doesn't the Nike+ Sport kit work with the iPhone?
    So I should plug simply the dongle in the touch G1 and with the latest firmware be able to do the thing.
    That may be your opinion but it's not the way it works.
    This is incredible. You know, this is what Microsoft was doing and now Apple is doing it !
    Microsoft had products that worked with the Sport kit? Didn't know that.

  • HT201272 Remote app to control iTunes no longer works

    I use Remote app on all of my devices to control iTunes. I had to restore three iPods and now the Remote app cannot be installed from iTunes or the App Store. The error message says I need iOS 4.3. How do I find this software? iTunes says my iPods are up to date. The Remote App worked fine before with the existing software.

    After digging around more, I was able to do what I was looking to do.  I installed iTunes on the machine downstairs, activated hom sharing.  Then used the Remote app on my phone, connected to iTunes downstairs, then went to "more" within the app... Then selected "shared", connected to the library upstaris... and Boom, its worked!

  • My iPhone no longer works with external speakers

    Since upgrading to the 3.0 software, my iPhone (the original 2G model) no longer works with the speakers I have, or with my DVD/surround system. Previously it worked fine! Has anyone else experienced this. I'm so disappointed, as I use the speakers/surround system a lot to listen to music.
    If anyone could help, I'd greatly appreciate it

    OK, I just clicked restore to backup in itunes and after restoring the iphone, it seems to be connecting and working through the speakers now. Whew!

  • All of a sudden, my 4th gen iPod Touch no longer works with my Apple TV, has Apple "upgraded" something to kill off this older unit? (IOS 6.1.2)

    All of a sudden, my iPod Touch (4th gen, IOS 6.1.6) no longer works with Airplay on my Apple TV.  It was working and still works as a 'remote' but not with Airplay which seems to indicate I've been abandoned by the message that pops up on the screen saying in essence "too bad you don't have IOS 7.1". 

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Sync iCloud-enabled iPhone no longer works with iTunes

    Both my wife's and my iPhone 4 and iPhone 4S stopped syncing with iTunes soon after the switch to iCLoud and iOS 5.0.1.
    Both phones are setup to backup into iCLoud and to sync via WiFi to the inhouse iTunes.
    At some point iTunes decided that both devices are no longer linked with our Computer (iMac 27 OSX 10.7.2) and insists whenever it 'sees' the iPhones on WiFi or the local cable that either devive has to be initialized or restored from the latest local backup (which is outdated due to the iCloud backups).
    No way to syn music, videos, movies to any of the devices ever since.
    Anybody else having the same issues with iTunes 'forgetting' previously paired iPhones?

    That is wild! My receiver had problems under 4.1, and I upgraded to 4.2 last night hoping to rectify things. It worked for me, flies through the menus and plays back beautifully again.
    I have a 3GS and a Pioneer deck in the truck.

  • "Import GPS from iPhone" no longer working with iPhone 4 & 4S

    Hi-
    Since upgrading to the Iphone 4, the Import GPS from Iphone function has ceased to work.  The phone appears on the import screen, and photos can be imported sucesfully (and the GPS data is embedded correctly on the photo), but when you go to the places window and go to the import gps from iphone function, the window opens like it's trying to bring up the photos but nothing appears.
    This bug continues with the 4S.  This function worked fine with my Iphone 3.
    Has anyone found a work around for this?  I'm surprised this bug has yet to be fixed.
    Thanks
    Matt

    I have the same problem the screen is show something like this:
    And never stops and show any photo.
    In other way i want to use it to create an slideshow that scroll the map showing the photos, it is possible?
    An update soon to fix this problem...
    Thanks...

Maybe you are looking for

  • Is there a Maximum number of songs you can have in iTunes library?

    I have reached what I believe to be the Maximum number of songs that iTunes will allow. That number is 37,562 songs. Since reaching this plateau I have since split my iTunes library into two seperate libraries using the program Libra but am wondering

  • Adobe Form Repeat a Subform Every Page

    Hello Adobe Forum, I'm an SAP user and am creating an Adobe form (my first). I posted this in an SAP forum, but have yet to receive any feedback whatsoever so I thought it may be better to go to the Adobe experts themselves. I've run into an Adobe is

  • Deployed Baseline Not Using Latest Config Item Revision

    I have made sure that the baseline is set to use latest revision, and even redeployed the baseline to some test machines, but they all still show and old revision. I have deployed another baseline with the same behavior. In both cases the initial rev

  • Create Materialized View Failure

    I'm trying to create a materialized view on a database on my local laptop, and when I execute the create it fails with the following error: ORA-06550: line 1, column 60: PLS-00103: Encountered the symbol ".16" when expecting one of the following: . (

  • MacBook Pro 3.1 boots up freezes then shuts down before sign in screen

    I recently upgraded to Yosemite from Mavericks and now my MacBook Pro 3.1 when Iturned on takes me to my login screen (sometimes other times even before the login screen) freezes up, I can't make the mouse cursor move and keyboard does not function t