The Remote Desktop Management service terminated with the following service-specific error %%4294967295

Got this error after a reboot for the monthly MS hotfixes. After messing around too much, I finally found the problem and though that I would document it here since I have not found the solution anywhere I looked.
This is in a Remote Desktop setup of two RDCB using a SQL DB that is hosted on a third server. The Remote Desktop Management service would fail to start with the "The Remote Desktop Management service terminated with the following service-specific
error: %%4294967295" error because the SQL Server service hosting the database was offline. It had not automatically restarted after the same hotfixes. So I started the SQL server, then was able to get Remote Desktop Management to start on my RDCB without
any delay.
Philippe Carignan

Hi Philippe,
How is everything going on?
Please check below thread for information.
Remote Desktop Management Service, Service-specific
error %%2284126209
Hope it helps!
Thanks,
Dharmesh

Similar Messages

Event 7024 The DPMRA service terminated with the following service-specific error:

Hi
I am getting a DPMRA error on an Exchange 2013 Server.
Event 7024, Service Control Manager
The DPMRA service terminated with the following service-specific error:
An attempt was made to access a socket in a way forbidden by its access permissions.
I think I have fixed the issue by uninstalling the DPM Agent and reinstalling it. It now needs a restart (I will do this after hours)
Is there a better way of fixing an issue like this?

Hi
Something has probably changed on the protected server side that affects the DPM agent. In some cases the DCOM configuration could change. Look at this blogpost and verify your DPMRA DCOM object.
http://robertanddpm.blogspot.com/2010/08/dpm-ra-rights.html
If this doesn't do the trick try reinstall the agent.
Best Regards
Robert Hedblom
MVP DPM
Check out my DPM blog @ http://robertanddpm.blogspot.com

Desktop manager not connecting with the 9700 bold

hi,
I am using a 9700 bold, i updated to the latest desktop manager and since then when ever i open the destop manager an error message comes in ( RIM handheld communications manager has stopped working) Can any one one tell me what that is, i have tried uninstalling and going back to a older version but nothing seems to work, please help me, thought the phones charges and it back ups in the older version of desktop manager but the mass storage device option osent show up??
Rregards,
mubashir

hi,
I am using a 9700 bold, i updated to the latest desktop manager and since then when ever i open the destop manager an error message comes in ( RIM handheld communications manager has stopped working) Can any one one tell me what that is, i have tried uninstalling and going back to a older version but nothing seems to work, please help me, thought the phones charges and it back ups in the older version of desktop manager but the mass storage device option osent show up??
Rregards,
mubashir

How to install the Remote Desktop Services role on a Windows 2012 R2 Server

Hello,
I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
1- Role-based or feature based installation
2- Remote Desktop services installation
I see the RDP install option in both cases.
1- Which one do I use?
2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
users use those?
Any help will be very much appreciated.
Thank You,
Victor.

TP,
Thank you for your response. I added the RD Licensing thru the Role-based option.
Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
Host -> Licensing
Use the specified RD license servers = NameOfMyServer
Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
Thank you again,
Victor

Remote Desktop Management service not starting. service-specific error: %%2284126209 - Event ID: 7024

Hi Forum members,
We have a client that has intermittent issues with RDS on a 2012 R2 server.
As an overview of the environment, the client has a single VMWare host support 2 x Windows 2012 R2 VMs one is the File/Print/Email server and the 2nd is the RDS server used to allow the client to run MYOB Enterprise. Both servers have the AD DS role and
DNS roles amongst others.
The 1st issue is that the RD Connection Broker shows the error: "The server pool does not match the RD Connection Brokers that are in it. and then "1. Cannot connect to any of the specified RD Connection Broker servers".
The above issue seems to be caused by the RDMS service not starting. When you attempt to start it, the service stops and the error in the title is logged in the "System" event log. Full transcript below:
Log Name:      System
Source:        Service Control Manager
Date:          21/01/2015 4:50:32 PM
Event ID:      7024
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      intentionally removed.local
Description:
The Remote Desktop Management service terminated with the following service-specific error: %%2284126209
Event Xml:
<Event xmlns="
<System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7024</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T05:50:32.129949400Z" />
    <EventRecordID>53721</EventRecordID>
    <Correlation />
    <Execution ProcessID="568" ThreadID="12436" />
    <Channel>System</Channel>
    <Computer> intentionally removed.local</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">Remote Desktop Management</Data>
    <Data Name="param2">%%2284126209</Data>
    <Binary>520044004D0053000000</Binary>
</EventData>
</Event>
In addition in the "Application" event log, the following error is logged:
Log Name:      Application
Source:        MSSQL$MICROSOFT##WID
Date:          21/01/2015 5:24:47 PM
Event ID:      18456
Task Category: Logon
Level:         Information
Keywords:      Classic,Audit Failure
User:          NETWORK SERVICE
Computer:      intentionally removed.local
Description:
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Could not find a login matching the name provided. [CLIENT: <named pipe>]
Event Xml:
<Event xmlns="
<System>
    <Provider Name="MSSQL$MICROSOFT##WID" />
    <EventID Qualifiers="49152">18456</EventID>
    <Level>0</Level>
    <Task>4</Task>
    <Keywords>0x90000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T06:24:47.000000000Z" />
    <EventRecordID>4228336</EventRecordID>
    <Channel>Application</Channel>
    <Computer>intentionally removed.local</Computer>
    <Security UserID="S-1-5-20" />
</System>
<EventData>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data> Reason: Could not find a login matching the name provided.</Data>
    <Data> [CLIENT: <named pipe>]</Data>
    <Binary>184800000E0000001F00000055004E0047004500520045005200410055005300530056005200300033005C004D004900430052004F0053004F0046005400230023005700490044000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
I have been attempting to resolve these errors for some time, without success. I have read the many KBs and forum entries related to the above and applied a number of the suggested fixes, including the one which suggests to add the NT SERVICE\ALL SERVICES
to the "Logon as a Service" in the "User Rights Assignment" of the "Default Domain Policy" which is linked to the domain level, that both servers are objects of.
My question to the forum is, can anyone come up with a solution to resolve the above issues and all the RDMS service to start which will then hopefully resolve the broker error?
Regards,
David West.

Hi David,
If virtual machines on the server are Windows Server 2012, then it is not supported to install Remote Desktop Connection Broker on a Domain Controller.
More information for you:
Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012
http://support.microsoft.com/kb/2799605/de
Guidelines for installing the Remote Desktop Session Host role service on a computer running Windows Server 2012 without the Remote Desktop Connection Broker role service
http://support.microsoft.com/kb/2833839
If the VMs are Windows Server 2012 R2, I suggest you install RDS on a separate machine to see if the issue persists.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Windows Server 2012 Standard - Remote Desktop Management service won't start

Dear colleges, I'm seeking your help in resolving a weird issue with Remote Desktop.
The Remote Desktop Management service gives the following error message any time it is attempted to start:
"The Remote Management Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
The Event Viewer error message is as follows:
"The Remote Desktop Management service failed to start. Error code: 0x88250001"
Whenever I connect to the server with RD I get error message that the Remote Desktop Licensing Server isn't configured and that the RD trill will expire in N-days. The server is up to date updates wise and has been licensed for 5 RD CALs. The server hosts DNS
server and has AD DS role installed, is virtualized to have one Hyper-V server.
I read some blogs about having both DNS and AD DS on one box is a bad sea and a root cause of the issue. Well, that very well may be, but for me that's an option as I'm not going to get a box to just host DNS. There should a solution to this as I shouldn't
only one suffering from this issue.
I also read about KB2871777 - Servicing stack update supposedly addressign this issue. Well, it's on my system and the issue is there too. :)
Will I loose ability to RD when the trial expires or it's just another misleading MS message that can be ignored?
How do I mend Remote Desktop Management service to start?
Appreciate your help!

Hi,
Thank you for posting in Windows Server forum.
Can administrators perfectly connect to RDS environment?
In meantime please check that you have properly configured and activated RD License role service and install RDS CAL on it. It might also possible that you have configured RD License server but it server can’t find it and giving you error due to certificate
also. Please check that you have properly configured certificate on your RDS Server. Try to install and update below hotfix for License related issue.
No RDS license when you connect to an RDS farm in Windows Server 2012
http://support.microsoft.com/kb/2916846
If you have configured both RDS and AD DS on single server then also you may find some error reading this. If so please try to setup both roles on different server and check the result. In addition to this, please check below articles.
What's New in Remote Desktop Services in Windows Server 2012
http://technet.microsoft.com/en-in/library/hh831527.aspx
Install Remote Desktop Services Failed on Windows 2012 Server
http://social.technet.microsoft.com/Forums/windowsserver/en-US/bbf47aa2-8ae5-4f22-9827-afee5a11417a/install-remote-desktop-services-failed-on-windows-2012-server?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

The grace period for the Remote Desktop Session Host server has expired

<p>I'm running Windows Server 2012, we only have 1 server and it's a DC. I'm trying to RD to the server from my Windows 7 laptop. It was working fine on Friday but when I came in on Monday I got message saying that 'The remote session was disconnnected
because there are no Remote Desktop License Servers available to provide a license'
So after a bit of digging I found out my 'grace period' had expired, so ordered a new license which I got today, installed this all ok but still i cannot connect via RD I get the same message....went into the RD License Diagnoser and it said the problem
was as follows
'The grace period for the Remote Desktop Session Host server has expired, but the RD Session Host server has not been configured with any license servers. Connections to the RD Session Host server will be denied unless a license server is configured for
the RD Session Host server.'
Suggested Resolution as follows
Configure a license server for the Remote Desktop Session Host server. If you have an existing license server, specify that license server for the RD Session Host Server. Otherwise, install RD Licensing on a computer on your network and Configure RD Session
Host Server to use it.'
I cannot figure out how to do this as I cannot find the RD Session Host Server tool.
Can any of you lovely people help me please

Hello,
Best option would be to assign the license server by using AD GPO. Youl will need to configure the following:
Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Licensing
and define the settings for:
Use the specified Remote Desktop License Server
Set the Remote Desktop Licensing mode
Then assign the policy tho your server.
regards Robert Maijen

The Remote Desktop administrator software failed to start due to an unexpected error...

Hi all...
Suddenly, I'm getting this error message when I try to open ARD. It was working a week ago and I'm not aware of changing anything. Any advice?
This is the 3.6.1 version of the ARD admin and I have the 3.6.2 Client installed (that was the way it was before, too, when it was working).
Note: I did try a fix from the forums that was posted in 2009, which required deleting the ARDAgent from the RemoteManagement folder in System/Core Services... and then reinstalling again using the Apple ARD Admin download for same. It worked for one run of the program, then the error came back.
What do you guys think?

bcvanbelle wrote:
Updated from 10.5.1 to 10.5.2. System seemed slow at first, noticeable keyboard lag and otherwise sluggish. Noticed that Remote Desktop no longer worked. Installed Graphics update. No more typing lag and speedier performance. Remote Desktop still dead.
Error message:
The Remote Desktop Administrator software failed to start due an unexpected error.
Hmphf.
You may have to reinstall the Remote Desktop SW. See if that helps.
I don't think it's a coincidence that this update "fixed" the Remote Desktop SUID warning, and it also removed the potential update from my computer which I had placed on "Ignore" since I did not need it and did not need the warning, either. So there is a connection between this update and the Remote Desktop SW.

How Do You Change the Remote Desktop Listening Port in Win 8.1 Pro

I am trying to setup two Win 8.1 Pro computers for Remote Desktop access on my local network. I can get Remote Desktop working fine on both when they are using the default RD port 3389. I am unable to change the listening port on one of the computers so
that I can access either via a public Internet connection. I change the listening port in the Registry, reboot the computer and verify that the port number has been changed BUT the computer still responds to the old port 3389 and can't connect via the new
port number. I added a Firewall rule for the new port, but that did NOT solve the problem.
I have followed the procedure below and verified in the Registry that the port is changed but the Remote Desktop remains accessible only on the default port 3389. The new port number in the Registry is 39699. I used a network scanner and it shows the computer
is still listening on port 3389 for Remote Desktop connections. Why is Win 8.1 Pro ignoring the new port number in the Registry and still responding on 3389? Is there another place in Win 8.1 Pro that the port also needs to be changed. I also added a new rule
in the Firewall to allow incoming requests on port 39699? This is a very frustrating problem, any suggestions are greatly appreciated.
I followed the procedure shown below.
Hi ,
Based on my test, we can change the listening port for Remote Desktop.
To change the port that Remote Desktop listens on, follow these steps.
1.Start Registry Editor.
2.Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\PortNumber
3.On the Edit menu, click Modify, and then click Decimal.
4.Type the new port number, and then click OK.
5.Quit Registry Editor.
6.Restart the computer.
Meanwhile, please note, please type the new integer port number between 1025 and 65535 in the PortNumber text box.
And make sure the new port number is not in use by other application.
We may use the command below to check the result.
netstat -a
Also, we can use Network Monitor to trace the port.
Microsoft Network Monitor 3.4
Regards,

Hi,
There are two item that should be modified to change the default 3389 port:
One is: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\Wds\rdpwd\Tds\tcp]. Modify the PortNamber to the one you want.
The other is: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentContro1Set\Control\Tenninal Server\WinStations\RDP\Tcp]. Modify the PortNumber to the one you want.
In your case, you missed the first one.
Regards
Wade Liu
TechNet Community Support

Getting Client Name in Remote Desktop Manager for Server 2012 R2

Remote Desktop Manager appears to have been replaced or moved in Server 2012 to Server Manager. It doesn't really matter to me where this is located, however I don't seem to have all of the features that were in Remote Desktop Manager (2008 R2). The biggest
one that I need is to be able to tell what computer each RDS user is logged in from. We use this quite often so we can remote into that users computer for troubleshooting.
Does anybody know how to obtain this information in Server 2012 R2? If it's not possible in Server Manager, can it be done with Powershell? A 3rd party application?
So far the only way I have been able to do this is if there is still a 2008 R2 server on the network. I can log into it and use Remote Desktop Manager to connect to the 2012 R2 server. Since a 2008 server can still obtain this information for a 2012 server
there must be a way to achieve this.
Thanks in advance!
Tom

Hi Tom,
In addition, the PSTerminalServices PowerShell Module might help.
https://psterminalservices.codeplex.com/releases/view/65937
You can run Get-TSSession in PowerShell.
Thanks.
Jeremy Wu
TechNet Community Support

Application triggered a termination with a short dump(Assessment error)

Hi,
I created one accessment cycle with couple of segments. While executing this assessment cycle one of the segment is erroring out and it's throwing a runtime error. I searched in OSS and didn't find the right one. I really appreciate your thoughts and answers.
Short text |
The current application triggered a termination with a short dump.
Error analysis
Short text of error message:
Error ERROR_BW_REFBZ
Long text of error message:
Diagnosis
The following program error or handling error has occurred.
Error information:
ERROR_BW_REFBZ
System Response
| Processing is terminated.
Thanks
Br

Thanks for your quick response Baranyai and we set transfer prices indicator at controlling area level and it's related to profit center valuation. How is going to impact on Assessment cycle and it doesn't appear while creating and executing assessment cycle. I may be wrong and really appreciate your help.
Thanks
Br

The Web Management Service service terminated with service-specific error %%-2147483640,

We've been able to successfully, automatically, deploy our MVC and WebApi to IIS7.5 on Win2008 R2, for some time now. Just this week the MSDeploy stopped working. The System event log shows this error when attempting to restart the Web Management
Service on the targeted Win200 R2 server:
The Web Management Service service terminated with service-specific error %%-2147483640.
The Application log shows this error at the same exact time the above error occurs.
IISWMSVC_STARTUP_UNABLE_TO_ACTIVATE_HWC
Failed to activate the Hostable Web Core (HWC). Web Management Service startup failed. Please reference the Win32 error in this event for further information. Exception:System.Runtime.InteropServices.COMException (0x8007007F): The
specified procedure could not be found. (Exception from HRESULT: 0x8007007F) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at Microsoft.Web.Management.Server.WebServer.Microsoft.Web.Management.Server.Interop.IWebServer.Start()
Process:WMSvc User=NT AUTHORITY\LOCAL SERVICE
The above error is preceded by this warning:
A listener channel for protocol 'http' in worker process '7164' serving application pool 'WMSvcAppPool' reported a listener channel failure. The data field contains the error number.
Which is preceded by this error:
Failed to find the RegisterModule entrypoint in the module DLL C:\Windows\Microsoft.NET\Framework64\v4.0.30319\webengine.dll. The data is the error.
We've attempted to reach the target server using https://ourservername:8172/MsDeploy.axd. The response is:
Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection
Is this occurring because the port is blocked or because the Web Management Service is not running? (The Windows Firewall with Advanced Security dialog says the "Windows Firewall is off" and there are no entries in the firewall log (C:\Windows\System32\LogFiles\Firewall).
We've seen some posts that indicate the certificate may be the issue. Not sure how to actually tell if this is the case though. The CERT we have says it is valid thru 2029.

Hi Nicola,
seems like your web service runtime is not configured correctly. Please check out the following SAP Notes:
Note 1043195 - Configuration of the Web service runtime
Note 1292171 - Troubleshooting Guide: ABAP Web Services Runtime
Kind regards
Heiko

The Lync Server Front-End service terminated with service-specific error %%-1008124893.

Hello, everyone
I've installed Lync Server 2010. There was no error during installation. But when i start Lync Server Front End Server, i'm getting following error:
The Lync Server Front-End service terminated with service-specific error %%-1008124893.
In event viewer:
The evaluation period for Microsoft Lync Server 2010 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2010 has expired.
I've upgraded Lync Server according to http://technet.microsoft.com/en-us/library/gg521005.aspx?ppud=4
Also I've installed all Lync Server updates.
But I still could not start Lync Front End Sever. How can I solve this problem?
Thanks

Hi,
Can you try to run
start-cswindowsservice -report c:\report.html
and post the report so we can have more information about your problem ?
Regards,
Adrian TUPPER - ABC Systemes - http://thelyncexperience.blog.com/ If answer is helpful, please hit the green arrow on the left, or mark as answer Thank you

How to resolve error 'The DPMRA service terminated with service-specific error Only one usage of each socket address (protocol/network address/port) is normally permitted'

One of my exchange 2010 servers dpm agent is give the following error when the dpmra service attempts to start.
The DPMRA service terminated with service-specific error Only one usage of each socket address (protocol/network address/port) is normally permitted..
I have tried uninstalling/reinstalling the agent but this does not resolve the issue
Any help would be greatly appreciated.
Thanks
William Hickson

Hi
Something has probably changed on the protected server side that affects the DPM agent. In some cases the DCOM configuration could change. Look at this blogpost and verify your DPMRA DCOM object.
http://robertanddpm.blogspot.com/2010/08/dpm-ra-rights.html
If this doesn't do the trick try reinstall the agent.
Best Regards
Robert Hedblom
MVP DPM
Check out my DPM blog @ http://robertanddpm.blogspot.com

[Forum FAQ] Troubleshoot the error "The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode"

Symptom
RD License server is a key component of RDS. It licenses users to access RDS servers.
After purchase the required RDS CALs, we need to activate the RDS License server and install the purchased RDS CALs. However, during the installation or after installation, we may face errors
about RDS License.
In most cases, the following error may occur.
Error:
The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode, but license server "Server name" does not have any installed licenses with the following
attributes:
Product version: Windows Server 2012
Licensing mode: Per User
License type: RDS CALs
Troubleshooting
1. Check whether the RD License Configuration is configured properly and there are no Warnings in the Event.
2. The License Server should be part of 'RD Server License' group in Active Directory Domain Services.
3. Check if the Licensing Mode is correct.
- To change the Licensing Mode we can use RD Licensing diagnose, PowerShell cmdlet and Group Policy.
Via PowerShell cmdlet:
To change the licensing mode on RDSH/RDVH:
$obj = get-wmiobject -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
$obj.ChangeMode(value)
# Value can be 2 - per Device, 4 - Per user
Via Group Policy
Path: Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Licensing
Use the specified RD license servers = FQDN of server name
Set the Remote Desktop licensing mode =
Per User
However, if issue persists, please provide detailed information and post the question in the
Remote Desktop Services (Terminal Services) forum.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi Richard,
You need to uninstall Remote desktop session host feature. After removing it, you will default two connections which does not need to purchase RD CALs'.
Thanks,
Umesh.S.K

The Remote Desktop Management service terminated with the following service-specific error %%4294967295

Similar Messages

Maybe you are looking for