The Remote gatway is not responding
Have tryed connecting thru VPN to an AS400 computer system. Two other people are connecting to AS400 with no problem. ATT suggested changing my IP address because the owner of the AS400 was assigned the same IP address. We have been trying for a few weeks to get this to work. We have had several conversations (3-Way) with ATT to no avail. Had one guy tell us to disable NORTON ANTIVIRUS software and try. Does you have any idea how I cann connect? HELP! Software system is VISTA (both systems). Using LINKSYS QUICK VPN.
What is the model number of your Linksys device? Please include the hardware version plus the firmware version. I believe that the Linksys Quick VPn only works with a Linksys VPN router.
Similar Messages
-
We've encountered the following issues: The remote server is not responding in a proper manner
I have never downloaded Adobe Creative Cloud/Suite/Photoshop basically anything for myself before and have just bought the Creative suite (£15.88/month) and am trying to install it to my computer (Windows 8). I have downloaded the Creative Cloud Set-Up but am unable to get any further than this. When I click on the download, it looks like it is going to download (Adobe Installer, Downloading Creative Cloud desktop and a loading bar) but then it tells me it has encountered the following issues: The remote server is not responding in a proper manner.
Now, I have been looking online for a solution and I saw something about changing an OOBE file in Program Files x86>Common Files>Adobe and at first there was no OOBE file so after more looking I thought I might have to download the Adobe Application Manager, which I did, but that doesn't work either, it just says unable to Reach Adobe servers, check internet connectivity (don't think there is anything wrong with this, I've not had any ther problems with internet connectivity) and firewall settings (i disabled the firewalls).
So I really have no idea what to do, the forums and help sites are confusing and none of the suggestions appear to work?!
Please help!
Thanks in advance!HI Jneilon,
Try folowing the kb article : Error "Remote server is not responding" | Install and confirm if its working fine or not .
If you are behind a corporate network with network restrictions ? If yes, You might want to connect with your IT department and request them to white list the entries for Adobe as mentioned in the article : Creative Cloud Help | About Creative Cloud Packager
Site/Port information used by Creative Cloud Packager
The following host/port combinations may need to be whitelisted when logging in with an Adobe ID to download, install, and package applications using the Creative Cloud Packager.
Address
Ports
ccmdls.adobe.com
443
ims-na1.adobelogin.com
80
443
ims-prod06.adobelogin.com
443
na1r.services.adobe.com
80
443
prod-rel-ffc-ccm.oobesaas.adobe.com
443
prod-rel-ffc.oobesaas.adobe.com
443
lm.licenses.adobe.com
80
443
ccmdl.adobe.com
80
swupmf.adobe.com
80
swupdl.adobe.com
80
Cheers,
Kartikay Sharma -
RV220W reports the remote gateway is not responding.
Hi, I've just set-up one of the RV220W VPN solutions.
This worked fine for a while, but now it reports the remote gateway is not responding.
Other clients can connect, but not the computer I'm using at home.
Logfile reports:
2011/08/31 21:10:31 [STATUS]Success to connect.
2011/08/31 21:10:31 [STATUS]Tunnel is configured. Ping test is about to start.
2011/08/31 21:10:31 [STATUS]Verifying Network...
2011/08/31 21:10:37 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:10:40 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:10:43 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:10:46 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:10:49 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:11:01 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
2011/08/31 21:11:03 [STATUS]Disconnecting...
2011/08/31 21:11:07 [STATUS]Success to disconnect.
2011/08/31 21:15:07 [STATUS]OS Version: Windows 7
2011/08/31 21:15:07 [STATUS]Windows Firewall Domain Profile Settings: ON
2011/08/31 21:15:07 [STATUS]Windows Firewall Private Profile Settings: ON
2011/08/31 21:15:07 [STATUS]Windows Firewall Private Profile Settings: ON
2011/08/31 21:15:07 [STATUS]One network interface detected with IP address 192.168.2.2
2011/08/31 21:15:07 [STATUS]Connecting...
2011/08/31 21:15:07 [DEBUG]Input VPN Server Address = 81.167.1.1
2011/08/31 21:15:07 [STATUS]Connecting to remote gateway with IP address: 81.167.1.1
2011/08/31 21:15:07 [WARNING]Server's certificate doesn't exist on your local computer.
2011/08/31 21:15:09 [STATUS]Remote gateway was reached by https ...
2011/08/31 21:15:09 [STATUS]Provisioning...
2011/08/31 21:15:17 [STATUS]Success to connect.
2011/08/31 21:15:17 [STATUS]Tunnel is configured. Ping test is about to start.
2011/08/31 21:15:17 [STATUS]Verifying Network...
2011/08/31 21:15:22 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:15:25 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:15:28 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:15:31 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:15:34 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:15:46 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
2011/08/31 21:16:49 [STATUS]Disconnecting...
2011/08/31 21:16:53 [STATUS]Success to disconnect.
I've tried the most common stuff.
Enabling ICMP, checked that remote administration runs on port 443, changed MTU to 1400 manually, It allows fragmented packages too.
Checked that IKE and IPSec services are running.
I've also tried both with windows firewall ON and OFF.
A collegue of mine had the same problem in the same timeframe as me, but after a while - he suddently was able to connect.
I still can't!!
Firmware Version: 1.0.2.4
Anyone got a fix for this?
Edit: IP is not real.Ok, so I had a chat with Cisco - and it seems like the setup on the RV220W was done correctly and was working fine.
Showed me a few things that could come in handy checking out when running diag on the quickvpn.
I disabled all antivirus realtime checks, opened 443 and 500 inbound to my computer - checked that the QuickVPN.exe had an exception in the windows firewall, and that the firewall was enabled.
Also checked that the services was set tu Auto and Started.
Rebooted computer, and I was able to connect!
Now I'm working my way back to the setup I had, to figure out what went wrong in the first place. -
RVO42G VPN Error - The Remote Gateway is Not Responding. Do you want to wait?
I have followed the instructions @
https://supportforums.cisco.com/docs/DOC-29399, but continue to receive the error message The remote gateway is not responding. Do you want to wait?
According to the RV042G, it shows the connection was made and the status is set to "online" for the user, but choosing to wait does not connect and the error returns eventually requiring you to select "no" to waiting.
Thanks for your help.
ClintonThanks for reaching out Abhishek.
I am trying to setup a Client to Gateway VPN so I can utilize the 50 available tunnels. I have setup a Group VPN with user accounts associated with it. I have installed the Cisco QuickVPN client on Windows 7 and Windows 8 clients and have attempted to login. I have followed the instructions that Cisco posted @ https://supportforums.cisco.com/docs/DOC-29399, but cannot connect a remote client successfully. I recieve the error:
The remote gateway is not responding. Do you want to wait?
Looking at the VPN log on the RV042G, I see:
Jun 26 11:27:45 2013 VPN Log (qknips0): deleting connection
Jun 26 11:26:51 2013 VPN Log loading secrets from '/etc/ipsec.d/ipsec.secrets'
Jun 26 11:26:51 2013 VPN Log forgetting secrets
Jun 26 11:26:51 2013 VPN Log listening for IKE messages
Jun 26 11:26:51 2013 VPN Log added connection description (qknips0)
Jun 26 11:25:41 2013 VPN Log loading secrets from '/etc/ipsec.d/ipsec.secrets'
Jun 26 11:25:41 2013 VPN Log forgetting secrets
Jun 26 11:25:41 2013 VPN Log listening for IKE messages
Jun 26 11:25:41 2013 VPN Log added connection description (grpips0)
Jun 26 11:25:41 2013 VPN Log (grpips0): deleting connection
I don't know what else to do to get the QuickVPN client working so I can take advantage of the VPN service and 50 tunnels.
Thanks. -
The remote server did not respond to a connection attempt
I have two Exchange 2003 servers: Old and New. Emails from the new server can go out however, users on the new server cannot receive emails from the old or the internet.
I get the following error:'....remote server did not respond to a connection attempt....'
All emails are stuck in newserver.domain.com.
KimaniBobHi KimaniBob,
Since Exchange 2003 is a very old Exchange version, we have not supported for Exchange 2003. It is recommended to upgrade your Exchange server to Exchange 2010. Your understanding will be appreciated.
Best regards,
Amy Wang
TechNet Community Support -
The remote server is not responding in a proper manner
Error message when trying to update to Photoshop CC
Hi Robbie3521,
You might want to refer to the KB Doc : http://helpx.adobe.com/creative-suite/kb/remote-server-responding-installing-aam.html -
We have high security at the company so I'm wondering if there is an issue with the firewall settings not letting adobe in. The progress bar when trying to run CreativeCloudSet-Up.exe only gets to about ten percent of the way before this error appears.
I've tried the help desk chat and was asked to change the folder name C:\Program Files (x86)\Common Files\Adobe\OOBE to C:\Program Files (x86)\Common Files\Adobe\OOBEOLD - this had no effect. I acctually get a registration error now when opening my CS6 apps. Anyone know how to fix this?
ThanksAnything is possible in a corporate network environemnt, but without exact info nobody can know. as a start, refer to this:
Sign in or activation errors
Mylenium -
Firewall: Error sending to the socket, server is not responding.
Hi all,
I'm trying to connect AIX machine to NT DB2 Database through JDBC with a firewall. I'm using the standard port 6789 in JDBC Applet Server in NT DB2. But I've gotten the following message:
COM.ibm.db2.jdbc.DB2Exception: [IBM][JDBC Driver] CLI0614E Error sending to the socket, server is not responding. SQLSTATE=08S01
The connection chain I'm using for AIX side is:
jdbc:db2://192.168.3.4:6789/DATABASE
I've configured the firewal to allow the port 6789 to be used, and also the other port 51544 (it's for remote administration, I think). I've also checked that wires and other stuff is working fine, but stil I cannot connect to the Database.
I don't know if there's something missing on the firewall configuration. Before, everything was working without the firewall.
Any help will be apreciated, THanks.
Rodrigo, SPAINIt looks like no port problem is happening, because we freed all the ports just to see if client tried to use some of them without our knowing. But it was still the same.
We were thinking about routing issues, but we were able to ping from client to server, and ports 6789 and 51544 were open as well. Maybe JDBC Client Driver is looking for an different IP address than 192.168.3.4. We know the firewall doesn't receive any query from JDBC Client, and that's very strange because if you see the routing tables in AIX machine, the default route is the firewall. Of course, there's not any other static defined route for the server (192.168.3.4), so it's supposed that default route is going to be used. But it's not.
We also restarted client machine from scratch but nothing. Maybe this problem happens because there's something wrong in AIX networking settings.
Rodrigo -
Hi All,
I am using SUN ONE Webserver 6 on AIX with Oracle 8i. Every now and then I get this error
java.sql.SQLException: Io exception: A remote host did not respond within the timeout period.
I am not able to unterstand this. Some one please help...
ThanksAre you able to connect to the database server from the same machine where you are running SJS Web Server using JDBC?
Are the driver and the Database using compatible drivers?
Does it normally work? Is the error accompanied by other symptoms like application failure or unusually slow responses? -
A remote server did not respond within timeout period
HI
I have a opened in servlet which is not closed.My servlet uses it for various checks.When a request comes after long time, my servlet tries to make a database call and that time I am getting following error.
java.sql.SQLException:IO Exception A remote host did not respond within the timeout period.
Please guide.
Thanks in advance.I am using the same connection again.
The db server is up and running and the query fetches hardly any data.
when i stop and restart the servlet, everything becomes normal. -
Remote gateway is not responding error message
When I try to connect through Quick VPN installed on PC with XP SP3, it shows "remote gateway is not responding".
I am using following setting
router configuration:
=========================
#1. Basic Setup, set MTU to manual and to 1492.
#2. In the Firewall - General Tab , DoS Prevention must be disabled, and everything else unchecked.
#3. VPV - VPN Client access, enter user name and password.
#4. VPN - VPN Passthrough - All Enabled.
#5. VPN - IPSec VPN -did not touch and here are the enteries:
section VPN Tunnel:
vpn tunnel: disabled
name: blank
NAT-Traversal: disabled
Local secure group:
type: IP adress
IP address: 192.168.1.0
Mask: 255.255.255.255
Remote secure group:
type: IP adress
IP address: 0.0.0.0
Mask: 255.255.255.255
Remote secure Gateway:
type: IP adress
IP address: 0.0.0.0
Key Management:
did not change anything either
Here is the VPN log on the router:
041 [Sat 21:18:40] listening for IKE messages
042 [Sat 21:18:40] forgetting secrets
043 [Sat 21:18:40] loading secrets from "/etc/ipsec.secrets"
Home side I am using Dlink router DI-624 and IPs are 192.168.0.1 and IPsec on the router is enabled.
On office side IP is 192.168.1.1 with linksys WRV200 router.
Please let me know what changes should I do on the router etc.? Thanks for your help.
Message Edited by JD001 on 09-15-2008 08:38 PMAll of them are running with Win XP SP2 at work. NAT-Traversal: is Disabled. DMZ is enabled. Thanks
-
Hi
I am trying to setup a Power BI On Premise datasource at a client site.
I successfully installed the Data Management Gateway (DataManagementGateway_1.2.5303.1_en-us (64-bit)) software on a Windows Server 2012 box and created the Gateway on the Power BI Office 365 site.
The Gateway is running correctly with no errors. When trying to setup the Datasource I get an error. As soon as I try to set the credentials the following message appears.
Failed to verify gateway 'GatewayName' status. The remote name could not be resolved: 'servername.domainname.net’
The servername which is returned in the error message is exactly the name which the DMG was installed on.
There is a firewall in place with a proxy server and I don't know if this might cause the problems. The
following website suggests adding the proxy settings in the config files of the DMG but this did not solve the problem.
The above setup process works perfectly when running the DMG from my laptop, connecting to a Gateway and creating a DataSource connecting to SQL Server.
Any assistance would be appreciated.HI
Thank You for the reply.
I resolved the issue in the mean time. I was on laptop which does not belong to the domain.
When setting up the datasource you should be on the same domain as the datasource as per the below post.
http://sharepoint-community.net/profiles/blogs/connecting-office-365-to-on-premises-data
Regards, Drickus -
iPhone 4S
IOS 7.1.2
This problem occurred after a whole days use of the iPhone without any hitches. I first discovered the problem by unlocking the phone and then swiping to the password screen to find that the top row was not responding to my fingers at all. Because of this I could not type in my password to unlock my phone. I then tried to restore my phone but could not because it needed the phone to be unlocked. I then tried holding down the home and sleep button at the same time until it turned off and on again, but this did not fix the problem. I also tried switching on the Voice Over mode on and trying to unlock the phone through that but of course it didn't work. I have also left it overnight but I was still unable to unlock the phone the next day. Any suggestions on how to fix this would be greatly appreciated.*UPDATE*
I have been able to use the Zoom function to zoom in and the keys on the top row no longer are in the non-responsive strip of area. -
Hi team,
I got below error message in SQL Server 2005 reporting service.
''The report server is not responding. Verify that report server is running and can be accessed from this computer'
also in reports, i am getting below error:
"The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
Get Online Help
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Get Online Help "
Please find below log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.4060.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>F:\Program Files\Microsoft SQL Server\MSSQL.6\Reporting Services\LogFiles\ReportServer__07_28_2014_09_08_41.log</Path>
<SystemName>MFLDDDBS04</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!webserver!1!7/28/2014-09:08:41:: i INFO: Reporting Web Server started
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration
file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Evaluation copy: 0 days left
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., CryptUnprotectData:
Win32 error:13;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.UnprotectData(Byte[] data, Int32 dwFlags, Boolean transitoryData)
at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.LocalUnprotectData(String data, Boolean transitoryData)
at Microsoft.ReportingServices.Diagnostics.RSConfiguration.DecryptCatalogData(String encryptedData, String element)
--- End of inner exception stack trace ---Hi Vivek,
In Reporting Services, values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. As to the error that “The encrypted value for the "LogonCred" configuration setting cannot be decrypted”,
we can know that it relates to the domain account for report server connection.
To fix this issue, we can refer to the following steps:
Log in to SQL Server Database Engine in SQL Server Management Studio.
Under Security folder, give sufficient permissions for your domain account.
Open your Reporting Services Configuration (go to Start -> All Programs -> Microsoft SQL Server 2005 -> Configuration Tools -> Reporting Services Configuration)
Navigate to the Database Setup tab, select ‘Service Credentials’ as the Credentials Type, then type your domain account and password in there. Press Apply.
Restart the Report Server services.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d05b404-83aa-4fb2-bba6-52b587e890ec/sql-2005-rs-configuration-tool-encryption-key-error
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
My first generation AppleTV will not sync with iTunes anymore. I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689" firewall is turned off.. Any ideas?
Thanks Rudegar,
I only synch and do not stream off of my 1st Gen AppleTV
I will try with ethernet but will be a pain in the butt if i can not fix it with wifi for long term fix
I may end up trying to do a named IP address vs DHCP for this appleTV (not sure if i can do both and do not want to remove DHCP as i have a bunch of sensors and other devices that I prefer to dynamically add to the network via DHCP vs. assign each one
Will keep working on other fix options (factory reset, etc.)
Thanks again
Maybe you are looking for
-
Original iphone works but can no longer be activated for phone use????
I have one of the original iphones that works but I no longer use (as in I paid $700 for it when it first came out). I just gave it to my nephew and my brother tells me Apple and ATT don't support it and he's being told that it can't be set-up as a f
-
How to put default section code in Automatic payment program(F110)
Hi, Is it possible to put default section code(BSEG-SECCO) in transaction code F110 for down payment transactions through Automatic payment program. in our company section code is required field for vendor transactions, if i am doing the transaction
-
Importation video impossible, please help
Bonjour, I m working with Adobe Premiere pro CS3 on Win Xp sp3. Its now impossible to import any media video !? Look like a audio media. Tanx for help and have a happy new year Have a look on my video.
-
Activation error due to the missing objects in shadow instance.
Hello All, We have problem with our NW701 -> NW730 upgrade. In phase ACT_UPG there is problem with activation of two tables -> 1EEDO519 "Table" "/BI0/PRSTT_EID" could not be activated 1EEDO519 "Table" "/BI0/PRSTT_OBJNM" could not be activated The pro
-
Replace iDisk backups with Dropbox?
Every day Backup automatically backs up a whole bunch of key files to my iDisk. When I use Finder to look at iDisk's contents, I see it creates a Full Backup Package once a month (as I've asked it to) and then Incremental Packages every day. But ev