The Remote's Infrared port...

just wondering what the situation is with this port... can it be used by other objects than the apple remote? is it accessable via windows through bootcamp or parallels? i am considering getting a dive watch (Mares Nemo) that can send my dive info to the computer through infrared and was wondering if the built in port could do it...

i am considering getting a
dive watch (Mares Nemo) that can send my dive info to
the computer through infrared and was wondering if
the built in port could do it...
No this would not work.
The IR sensor is connected in a way which won't allow data to be sent through it unlike the old IR sensor on some older PowerBooks.
iFelix

Similar Messages

How Do You Change the Remote Desktop Listening Port in Win 8.1 Pro

I am trying to setup two Win 8.1 Pro computers for Remote Desktop access on my local network. I can get Remote Desktop working fine on both when they are using the default RD port 3389. I am unable to change the listening port on one of the computers so
that I can access either via a public Internet connection. I change the listening port in the Registry, reboot the computer and verify that the port number has been changed BUT the computer still responds to the old port 3389 and can't connect via the new
port number. I added a Firewall rule for the new port, but that did NOT solve the problem.
I have followed the procedure below and verified in the Registry that the port is changed but the Remote Desktop remains accessible only on the default port 3389. The new port number in the Registry is 39699. I used a network scanner and it shows the computer
is still listening on port 3389 for Remote Desktop connections. Why is Win 8.1 Pro ignoring the new port number in the Registry and still responding on 3389? Is there another place in Win 8.1 Pro that the port also needs to be changed. I also added a new rule
in the Firewall to allow incoming requests on port 39699? This is a very frustrating problem, any suggestions are greatly appreciated.
I followed the procedure shown below.
Hi ,
Based on my test, we can change the listening port for Remote Desktop.
To change the port that Remote Desktop listens on, follow these steps.
1.Start Registry Editor.
2.Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\PortNumber
3.On the Edit menu, click Modify, and then click Decimal.
4.Type the new port number, and then click OK.
5.Quit Registry Editor.
6.Restart the computer.
Meanwhile, please note, please type the new integer port number between 1025 and 65535 in the PortNumber text box.
And make sure the new port number is not in use by other application.
We may use the command below to check the result.
netstat -a
Also, we can use Network Monitor to trace the port.
Microsoft Network Monitor 3.4
Regards,

Hi,
There are two item that should be modified to change the default 3389 port:
One is: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\Wds\rdpwd\Tds\tcp]. Modify the PortNamber to the one you want.
The other is: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentContro1Set\Control\Tenninal Server\WinStations\RDP\Tcp]. Modify the PortNumber to the one you want.
In your case, you missed the first one.
Regards
Wade Liu
TechNet Community Support

X60 Infrared Port setting in WinXP

Hello,
Could anyone tell me how to do the setting of Infrared port in WinXP SP3?
Since, I need to use it to connect with external device which is use Infrared communication also.
It requires Serial Port Mapping of Infrared communication via the external device application.
I tried to do related setting in BIOS (version 2.19) at Config --> Infrared
--> Infrared Device: Enabled
--> Infrared: Enabled --> Base I/O address: [2F8], Interrrupt: [IRQ3], DMA: [DMA3]
And save and reboot to WinXP. The Infrared port takes respond and prompted the related tray icon. But the device application cannot find the mapping COM Port for retrieved data.
Could you know how to solve it ?
Besides, I tried to disable "Infared" but the result is same.
Thanks

Andrew,
I was not sure if I was supposed to use the "bindery" syntax or NDS/tree
one.
I just rolled out all my printers by using a batch containing lines like:
rundll32 printui.dll,PrintUIEntry /if /b "Customized Printer Name" /f
%windir%\inf\ntprint.inf /r "\\TREE\queue" /m "HP LaserJet 4Si"
Much faster, no human errors.
I am still working out some issues though:
Do you get a printer icon on the taskbar when you print?
Do you receive notification printing from DOS?
Thanks Eric.
"Andrew Z Carpenter" <[email protected]> wrote in message
news:Qfgof.11356$[email protected]..
>> "Eric" <[email protected]> wrote in message
>> news:W3gof.11339$[email protected]..
>>
>> Hello,
>>
>> Is there a difference whether I chosse the port \\TREE\QUEUE.container
>> or \\TREE\QUEUE or \\SERVER\QUEUE and setting up printer in WinXP.
>>
>> Thank you.
>>
>> Eric.
>
>
> The Ports for my installed printers are reported as \\TREE\QUEUE
>
> While not the answer you are looking for, I'll tell you my preferred
> way to install a NW Queued printer to an XP workstation.
>
> Open up My Network Places, Novell Connections, Tree Name, Organisation,
> Organisational Unit where your Q objects are, then double-click the Q
> object you wish to add to the workstation.
>
> It's faster (in my experience) then using the Add Printer Wizard,
> especially if you had hit 'Browse' (which always seems to take ages
> for me).
>
>
>
> --
> AZC
>

Coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpA

Hi
I have installed coheI have installed coherence server "fmw_12.1.3.0.0_coherence_Disk1_1of1.zip" along with Examples on windows machine and C++ client coherence-cpp-12.1.3.0.0b51709-windows-x86-vs2012.zip on the same machine.
I have built the "contacts" C++ Example successfully and while I execute this "contacts" using run I am facing TcpAcceptor error.
On my coherence server the TcpAcceptor is listening on port 8088, so I have modified the extend-cache-config.xml file with values "ip address of my windows machine" and port as "8088".
All the time I am getting below error,
coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpAcceptor
    at class coherence::lang::TypedHandle<class coherence::component::net::extend::PofConnection> __thiscall coherence::component::util::TcpInitiator::openConne
ction(void)(TcpInitiator.cpp:307)
    at coherence::component::util::TcpInitiator::openConnection
    at coherence::component::util::Initiator::ensureConnection
    at coherence::component::net::extend::RemoteCacheService::openChannel
    at coherence::component::net::extend::RemoteService::doStart
    at coherence::component::net::extend::RemoteService::start
    at coherence::component::util::SafeService::startService
    at coherence::component::util::SafeService::restartService
    at coherence::component::util::SafeService::ensureRunningServiceInternal
    at coherence::component::util::SafeService::start
    at coherence::net::DefaultConfigurableCacheFactory::configureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
    at coherence::net::DefaultConfigurableCacheFactory::configureCache
    at coherence::net::DefaultConfigurableCacheFactory::ensureCache
    at coherence::net::CacheFactory::getCache
    at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void> >::sizeOf(bool)
    at _onexit
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at BaseThreadInitThunk
    at RtlInitializeExceptionChain
    at RtlInitializeExceptionChain
    on thread "main"
Caused by: coherence::net::messaging::ConnectionException: coherence::component::util::TcpInitiator::TcpConnection@029EAD78{Id=NULL, Open=1, LocalAddress=NULL,
RemoteAddress=10.242.152.242/10.242.152.242:8088}: socket disconnect
    at class coherence::lang::TypedHandle<class coherence::net::messaging::Response> __thiscall coherence::component::net::extend::AbstractPofRequest::Status::g
etResponse(void)(AbstractPofRequest.cpp:203)
    at coherence::component::net::extend::AbstractPofRequest::Status::getResponse
    at coherence::component::net::extend::AbstractPofRequest::Status::waitForResponse
    at coherence::component::util::Initiator::openConnection
    at coherence::component::net::extend::PofConnection::open
    at coherence::component::util::TcpInitiator::openConnection
    at coherence::component::util::Initiator::ensureConnection
    at coherence::component::net::extend::RemoteCacheService::openChannel
    at coherence::component::net::extend::RemoteService::doStart
    at coherence::component::net::extend::RemoteService::start
    at coherence::component::util::SafeService::startService
    at coherence::component::util::SafeService::restartService
    at coherence::component::util::SafeService::ensureRunningServiceInternal
    at coherence::component::util::SafeService::start
    at coherence::net::DefaultConfigurableCacheFactory::configureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
    at coherence::net::DefaultConfigurableCacheFactory::configureCache
    at coherence::net::DefaultConfigurableCacheFactory::ensureCache
    at coherence::net::CacheFactory::getCache
    at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object
,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void
,void,void,void> >::sizeOf(bool)
    at _onexit
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at BaseThreadInitThunk
    at RtlInitializeExceptionChain
    at RtlInitializeExceptionChain
    on thread "main"
Caused by: coherence::io::IOException: socket disconnect
    at unsigned int __thiscall coherence::net::Socket::readInternal(unsigned char *,unsigned int)(Socket.cpp:333)
    at coherence::net::Socket::readInternal
    at coherence::net::Socket::SocketInput::read
    at coherence::io::BufferedInputStream::fillBuffer
    at coherence::io::BufferedInputStream::read
    at coherence::component::util::TcpInitiator::readMessageLength
    at coherence::component::util::TcpInitiator::TcpConnection::TcpReader::onNotify
    at coherence::component::util::Daemon::run
    at coherence::lang::Thread::run
    on thread "ExtendTcpCacheService:coherence::component::util::TcpInitiator:coherence::component::util::TcpInitiator::TcpConnection::TcpReader"

We are facing same issue.    Could you please provide us any working .Net sample code for the version 12.1.2.0.
<ssl>
              <protocol>Tls</protocol>
              <local-certificates>
                <certificate>
                  <url>c:\Cert\</url>
                  <password>password</password>
                  <flags>DefaultKeySet</flags>
                </certificate>
              </local-certificates>
            </ssl>
thanks
Bala

Questions about remote control and infrared port Qosmio F20

Hi again,
My Toshiba Qosmio F20 comes with a remote control funcioning through a infrared device on the front of the computer.
Regarding this I have 2 questions:
1. How do I configure additonal functionality through the remote control? (Like launching and controlling Winamp?)
2. How do I connect other devices, like my cellular phone, pdas etc., to the infrared device on my computer?
Kind regards,
Vegard

Hi,
the Remote Control delivered with the Qosmio F20 is designed only for Windows XP Media Center Edition (all Remote Control's which are designed for Windows XP Media Center Edition work only with Media Center or Windows Media Player). Other program's like Winamp were not supported by these Remote Control's.
I believe, the Remote Control's are made by Microsoft and for a wide palette of product's (the Infrared Transceiver is on nearly all Media Center PC's e.g. Siemens-Fujitsu, the same). So it's a little bit tricky to support more program's then Media Center or Windows Media Player.
For other program's you need a second Remote Control like this one:
http://www.logitech.com/index.cfm/products/detailsharmony/GB/EN,CRID=2084,CONTENTID=9193
br, Ben

Error Message "The Remote device or resourse wont accept connection, not set up to accept connection from port https"

I get this error message when trying to open and log into an online casino "The Remote device or resource wont accept connection, not set up to accept connection from port https".
I am on a desktop computer my connection to the net is with a USB Virgin Mobile hotspot device.
I also have issues with some downloads not installing right for instance SKYPE wont work. If the problems are related I don't know
Thanks

Starting in Firefox 14, Firefox will guess an address and place it in the address bar (AutoFill feature). If you have ever connected to the site using a secure (HTTPS) connection, then Firefox will try to connect security to the address suggested by the AutoFill feature. To work around this you can:
* Edit the address to force Firefox to interpret your entry literally. For example, if there is a trailing / you can remove it.
* Turn off the URL bar AutoFill feature and just use the AutoSuggest drop-down.
* Clear Firefox's memory of the site so it doesn't default to a secure connection (however, this also removes any bookmarks you have to pages on the site).
To disable the in-address-bar autofill without losing the suggestions that appear below the bar:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''autofill''' and pause while the list is filtered
(3) Double-click '''browser.urlbar.autoFill''' to toggle it from true to false. You're done with about:config and you can close this tab.
"Forget about this site" will clear cache, history, bookmarks, and permissions for the site, and probably any saved certificate. There are two ways to get to this:
* History > Show All History, right-click an entry for the site > "Forget about this site"
* Type or paste about:permissions in the address bar and press Enter, then select the site from the list on the left side, and click the "Forget about this site" button on the right side
Depending on the size of your history and cache, this may lock Firefox up for a minute or two while everything is cleansed.

Apple or 3rd Party: PLEASE make a dock with the remote port!

Sure there was no room for the remote port on the bottom, but you could make a dock, just like the lanyard headphone dock, that includes the headphone miniplug and the remote plug, just like on all the docking iPods...
THEN, we could use our iTrip FM transmitters (or any one of them that use the iPod's power), that ever-so-cool Logitech Bluetooth headphone set, various wireless remote controls -- even Apple's own wired-remote control... the list goes on and on.... even that crazy iPod laser pointer...
Thanks in advance.

Good suggestion, your feedback should be provided at: http://www.apple.com/feedback/

Satellite P850 - question about Infrared port

Hi,
I have Windows 8 Pro installed onto my laptop and I've downloaded all the drivers and everything is working fine apart from the Infrared. I've searched all over the internet and I can't find a remote control to use with this laptop (including the Toshiba website).
I've installed the latest ENE CIR Driver (v4.1) as well as the Toshiba Remote Control Manager (v3.1.0.1). I looked in Program Files to open the Toshiba Remote Control Manager however when I click on the program to open it... Nothing happens (including in the notification area).
So my question is can I actually get a remote working with this laptop at all and if not then what is this Infrared port for because I can't find anything on my computer to actually use it with/for?!
Thanks for your help :p

Hi
Some Satellite P850 models are equipped with the remote controller and its possible to use the remote controller with Windows Media Center to play discs or videos, to view pictures and to watch recorded TV programs.
Models which dont include the a remote controller are *NOT* equipped with the an infrared receiver so the notebook cannot be operated with a remote controller.
The remote controller was not part of the package so your notebook does not support infrared receiver and therefore the installation of ENE CIR Driver and Toshiba Remote Control Manager was useless

With System 10.8.5 I can't find the remote pairing button in the advanced security window. Where is it?

I tried pairing my remote with my new Macbook Air. I went into the security settings, entered my password, opened advanced, and, unlike my old system on my previous Macbook, saw no mention of where to select for infrared remote pairing. Where is it?

Newer MacBook Air models do not have infrared ports.
So infrared remote can not be used.
Best.

Loss of DVD drive and Infrared port on new iMacs

Hi All,
Just wondering if anyone else has run into this issue. I teach CPR classes and sometimes when a client doesn't have the proper audio-visual equipment, I will bring my 2009 iMac to play the course DVD on. Thanks to the infrared remote, I can pause and play as needed without having to be right next to the computer. Well, as with all things, my older iMac is about ready to put out to pasture. The issue I'm having is that when I looked at the newer iMacs in the store as a replacement, there's no DVD drive and no infrared port or remote! Same price but less features!
What are my options here? I thought about buying an external DVD superdrive but then I have no way of operating it from afar. Also, the hardware (infrared port) for the Apple remote has been removed too. Has anyone else run into this? Aside, from purchasing a refurbished 2009 model iMac, how would I continue to be able to use my new iMac to play my course DVDs??

If you want to control your new iMac remotely and you own a mobile iDevice, there are remote apps you can use on both your iMac and iDevice.
These apps work over Wifi and/or Bluetooth.
Apple has its own remote app simply called Remote.
Another, which I use and is very comprehensive remote app, is called Rowmote Pro by a developer called Regular & Rhythm.
If you want complete and total remote control access to your Mac, look at Splashtop Remote.
There is also a dedicated WifI and/or Bluetooth remote for Macs and iDevices by a company called Satechi.
Found here.
http://www.amazon.com/Satechi-MediaRemote-Bluetooth-Multi-Media-Control/dp/B0082 4948U/ref=sr_1_1?ie=UTF8&qid=1391729056&sr=8-1&keywords=Satechi+remote
All of these options work with an external CD/DVD optical drive.
I use Rowmote Pro helper on my 2009 iMac and I use both my iPad and iPod Touch as the actual Rowmote Pro remotes to control my iMac.

Internal infrared port with MCE on Qosmio G10

Is anybody know how to use internal infrared port with MCE ( i can use it with the QosmioPlayer, but when i use windows, i can only use the usb infrared reciver!)

Why is this functionality disabled?
It is clear that the IR receiver on the front of the laptop is functional (it works under Qosmio Player).
It is a real hassle to have to plug the external USB IR receiver for MCE to have a remote - it makes the whole thing much less portable.
Is this simply a driver/config issue in MCE? Is it some bizarre requirement from MS for MCE 'certification'?

TcpListener not working on Azure: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.com

hi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I get the remote directory from an FTPActivationSpec header?

The header message generated for the oracle.tip.adapter.ftp.inbound.FTPActivationSpec contains the file name, FTP host and FTP port. Is there any way of getting the remote directory as well?
<schema attributeFormDefault="qualified" elementFormDefault="qualified"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/ftp/"
xmlns="http://www.w3.org/2001/XMLSchema"
xmlns:FTPAPP="http://xmlns.oracle.com/pcbpel/adapter/ftp/">
<element name="InboundFTPHeaderType">
<complexType>
<sequence>
<element name="fileName" type="string"/>
<element name="ftpHost" type="string"/>
<element name="ftpPort" type="string"/>
</sequence>
</complexType>
</element>
</schema>
This is already specified in the activation spec parameters:
<activationAgents>
<activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="ReadFileService">
<property name="ftpRemoteDir" type="LogicalDirectory">out</property>
<property name="portType">Read_ptt</property>
</activationAgent>
</activationAgents>
But I don't want to have to add a separate preference parameter to hold the same thing if I don't have to. Alternatively, is there any way of querying the activation agent parameters from within an xpath expression, similar to "ora:getPreference()"?
Cheers,

add:
<element name="directory" type="string"/>
to the FTP adapter header WSDL

How to create a jar file which is in the remote system?

Hi,
I have a set of files that resides in a remote system,which have to be "jar"red. I have a firewall in between. I want to create a jar file out of the files situated in the remote system.How do i go about this process.?

Hi,
You can't do that in a simple way. You need to have a port open in the firewall, and you need to have a server process on the remote machine.
Kaj

SQL Service Broker 2012: the connection was closed by the remote end, or an error occurred while receiving data: '64(The specified network name is no longer available.)'

Anyone can help with the below issue please? Much appreciated.
We have about 2k+ messages in sys.transmission_queue
Telnet to the ports 4022 is working fine.
Network connectivity has been ruled out.
The firewalls are OFF.
We also explicitly provided the permissions to the service account on Server A and Server B to the Service broker end points.
GRANT
CONNECT ON
ENDPOINT <broker> <domain\serviceaccount>
Currently for troubleshooting purposes, the DR node is also out of the Availability Group, which means that we right now have only one replica the server is now a traditional cluster.
Important thing to note is when a SQL Server service is restarted, all the messages in the sys.transmission queue is cleared immediately. After about 30-40 minutes, the errors are continued to be seen with the below
The
connection was
closed by the
remote end,
or an
error occurred while
receiving data:
'64(The specified network name is no longer available.)'

We were able to narrow down the issue to an irrelevant IP coming into play during the data transfer. We tried ssbdiagnose runtime and found this error:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>SSBDIAGNOSE -E RUNTIME -ID 54F03D35-1A94-48D2-8144-5A9D24B24520 Connect to -S <SourceServer> -d <SourceDB> Connect To -S <DestinationServer> -d <DestinationDB>
Microsoft SQL Server 11.0.2100.60
Service Broker Diagnostic Utility
An internal exception occurred: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
P 29830 Could not find the connection to the SQL Server that
corresponds to the routing address tcp://XX.XXX.XXX.199:4022. Ensure the tool is connected to this server to allow investigation of runtime events
The IP that corresponds to routing address is no where configured within the SSB. We are yet unsure why this IP is being referred despite not being configured anywhere. We identified that this IP belongs to one of nodes other SQL Server cluster, which has
no direct relation to the source server. We failed over that irrelevant SQL Server cluster and made another node active and to our surprise, the data from sys.transmission_queue started flowing. Even today we are able to reproduce the issue, if we bring
back this node [XX.XXX.XXX.199] as active. Since, its a high business activity period, we are not investigating further until we get an approved downtime to find the root cause of it.
When we get a approved downtime, we will bring the node [XX.XXX.XXX.199] as active and we will be running Network Monitor, Process Monitor and the SSB Diagnose all in parallel to capture the process/program that is accessing the irrelevant IP.
Once, we are able to nail down the root cause, I will share more information.

The Remote's Infrared port...

Similar Messages

Maybe you are looking for