The report MC+E does not match with F.01

Dear Friends,
The report MC+E does not match with F.01 and moreover it does not indicate the domestic sales.It only captures export sales.
Will you please tell me why it is happenning?
Thank you.
Sadanand.

Mohammed, are you able to create a brand new report using this same database source.
If that works then you know you have the proper drivers for the ODBC connection. Another
way to test this is to use Excel, create a database connection in Excel, to the ODBC table,
and see if you can pull data. You may need to update your ODBC drivers. If you are able
to pull data in your new report, try adding the other database to it, and see if the error returns.
I am on CR XI, so, I can't be much more help.

Similar Messages

The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assi

Hi ,
We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
"The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
Please let us know reason behind this error message.
Thanks,
Mruduala

You are kidding? It took me about 3 minutes to scroll down on my tab to get to the triplex button!
Habe you read the error message?
Quote:
java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
Check the trigger and it should work again.
Timo

SCCM issue - "LANG_LIST has some locales which does not match with the locale of serial number"

I have a problem with the error "LANG_LIST has some locales which does not match with the locale of serial number" recurring.
I am trying to install Acrobat XI Std silently by SCCM.
I've used the Adobe Customisation Wizard to create a mst which include the volume serial number we have with our licence purchases. Note that I am in Australia. I use the command line in SCCM for the install as "msiexec /i "AcroStan.msi" TRANSFORMS="D&B_AcroStd.mst" /qn" which fails silently. If I install on a local machine using an admin command prompt and changing to /qb at the end, I get the aforementioned error.
I have a few things to try and resolve, having searched the adobe forums and other forums for the solution. The mst is only trying to install US English & I have even gone so far as to use the direct editor in the customisation wizard and change some values in the property table to resolve this. In the property table I can confirm that LANG_SEL_DEFAULT = ENU, REGIONAL_LIST = ENU, LANG_LIST = en_US, ProductLanguage = 1033
Is there a way to check the language specified for ym serial number?
Bryndon

Update on a couple of details:
@Sabian,
Thanks for the location, I've downloaded and then when I tried an install of the newly extracted msi (admittedly on the same computer) I got exactly the same issue. Of note though is that running /qf automatically brought up the same serial number and the same incorrectly spelled company name. Installing on another computer (freshly imaged) doesn't have those inputs already present under /qf. Next when I try using the transfrom (a new one) with /qr it gives an error of the serial number, displaying the entire serial.
@Sebastian
I've had a look through yours and it seems our issues could have the same origin. Looks like I may have to call customer support regarding the serial number as Sabian suggested in your thread.
The bit that gets me is when the same serial number is used in a manual install (or /qf) then it installs ok without any errors.

Setup.exe gives a "LANG_LIST has some locales which does not match with the locale of serial number"

I ran the Adobe Customization Wizard XI to create a transform file and now when run setup.exe it always come with the error "LANG_LIST has some locales which does not match with the locale of serial number".
It does the same thing when using msi with the command : msiexec /i AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
Here is my setup.ini file
[Startup]
RequireOS=Windows XP
RequireMSI=3.1
RequireIE=7.0.0000.0
Require64BitVC10RT=1
CmdLine=/spb /rs /sl"1036"
[Product]
msi=AcroPro.msi
vcrtMsi=vc_red.msi
vcrtDir=VC10RT_x64
Languages=1033;1036
2052=Chinese Simplified
1028=Chinese Traditional
1029=Czech
1030=Danish
1043=Dutch (Netherlands)
1033=English (United States)
1035=Finnish
1036=French (France)
1031=German (Germany)
1038=Hungarian
1040=Italian (Italy)
1041=Japanese
1042=Korean
1044=Norwegian (Bokmal)
1045=Polish
1046=Portuguese (Brazil)
1049=Russian
1051=Slovak
1060=Slovenian
1034=Spanish (Traditional Sort)
1053=Swedish
1055=Turkish
1058=Ukrainian
1025=English with Arabic support
1037=English with Hebrew support
6156=French (Morocco)
CmdLine=TRANSFORMS="AcroPro.mst"
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=3
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
I don't know what goes wrong as took my serial number on my profile from the adobe web site, same thing for the download of the software.
Does it means that the serial number provided was invalid for deploying ?
NB.: My goal is to deploy our Acrobat XI through SCCM in silent mode and I don't know if there is extra consideration for that. For now it's only not working at the command line.
Another important point is that the install works great without customization ! If I just run the setup.exe from freshly extracted files and I use my serial number, everything is working fine.
So what goes wrong ?

Thanks for the reply brogers_1 and Vinod Dbhal, you gave good hint.
I retried installing the initial package in French on a Windows 7 English and the software installed properly in French.
As I used to work with virtuals for those tests, I rolled back my virtual and redo my test installation with chosing to install it in English on my Windows 7 English and again the installation finished properly but I was surprised when I realized that even if I chose English as language, the software was running in French !
Of course I can change the language settings (in the edit-preferences-language) to follow the operating system witch is nice.
That gave me the cue I needed to know. I started from scratch my customization with choosing only the French language in the "Application Languages" and I left the MUI Languages blank and saved the .mst
I ran again the same command : msiexec /i AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
And everything works fine.
NB.: As I used the .msi directly, of course I had to install the prerequirement Visual C++ 2010 first. Otherwise the installation failed without any error message.
Thanks again to you for your good hint,
Bob

Recovery scenario - Voting disk does not match with the cluster guid

Hi all,
Think of you can not start your guest VMs just because it has a corrupted system.img root image. And assume it contains 5 physical disk( which are all created by the RAC template) hence ASM on them.
What is the simplest recovery scneario of the guest vms (RAC)?
Can it be a feasible scenario for recover of the availablity? (Assume both of the RAC system images are corrupted and we prefer not a system level recovery rather than backup / restore)
1. Create 2 RAC instances using the same networking and hostname details as the ones that are corrupted. - Use 5 different new disks.
2 Shutdown the newly created instances. Drop the disks from the newly created instances using VM manager.
3. Add the old disks whose system image is failing to be recoverd but ASM disks are still in use (from the newly created instances using VM manager.) to the newly created instances.
4. Open the newly created instances
Can we expect the ASM and CRS could be initialized and be opened without a problem?
When I try this scenario I get the folllowing error from the cssd/crsd .
- Cluster guid 9112ddc0824fefd5ff2b7f9f7be8f048 found in voting disk does not match with the cluster guid a3eec66a2854ff0bffe784260856f92a obtained from the GPnP profile.
- Found 0 configured voting files but 1 voting files are required, terminating to ensure data integrity.
What could be the simplest way of recovery of a virtual machine that has healthy ASM disks but corrupted system image?
Thank you

Hi,
you have a similar problem, when trying to clone databases with 11.2.
The problem is that a cluster is uniquely identified, and this information is hold in the OCR and the Voting disks. So exactly these 2 are not to be cloned.
To achieve what you want, simply setup your system in that way, that you have a separate diskgroup for OCR and Voting (and ASM spfile), which is not to be restored in this case of szeanrio.
Only all database files in ASM will then be exchanged later.
Then what you want can be achieved.
However I am not sure that the RAC templates have the option to install OCR and Voting into a separated diskgroup.
Regards
Sebastian

I'm trying to make a purchase and I get a message that the information does not match with the bank. What can I do?

I'm trying to make a purchase and I get a message that the information does not match with the bank. What can I do?

Go to the APP store or Itunes. On the bottom of the mainpage, tap your apple id, view account. Then you can edit the payment information. Or you can do it(if you encounter a problem there) on Itunes on computer. Just go to the store, select your name and edit information. Make sure everything matches...exp date, name as appears on card etc..

Imei no. does not match with the serivce providers records as we had a replacement through insurance co. service provider will not unblock the phone

IMEI no on this phone does not match with service providers records as a replacement was issued from Apple in an insurance claim. The service provider Vodafone will not unlock this phone without proof of purchase which we have but the receipt does not record the EMEI no.

Contact Apple http://support.apple.com/kb/HE57

When I first bought it, it was meant to use all the services provided by Great Apple including the new LTE service as a main service for such device. Now I just realize that such service does not match with the model I have ... Pease advise ..

Greetings,
I hope this email finds you well. I bought my iPhone on December 1st, 2012 with a track order W459517623. When I first bought it, it was meant to use all the services provided by Great Apple including the new LTE service as a main service for such device. Now I just realize that such service does not match with the model I have, as per this link:
http://www.apple.com/iphone/LTE/
Model A1429
(GSM model)
Saudi Arabia - Mobily
The model Apple sent is A1428
I believe that such service should be provided to my devices too. Also, Apple always find best ways to solve such queries.
Please advise me
Thank you and Regards,
Abdulrahman

I'm assuming you bought it via the Apple Online store. Contact them. Use the Contact Us link at the bottom of the page. Did you buy the phone from the store in the country you intend to USE the iPhone? If you bought the phone in the US store and intend to use it OUTSIDE the US, you only have yourself to blame, as they shipped the CORRECT phone for use in the US.

Vendor aging unreconciled bal. does not match with TB Acct. Payable balance

Dear all,
When i take unreconciled vendor aging report with selection creteria all vendor codes selected,aging date as 31/03/09 and posting date from 01/04/08 to date 31/03/09,Interval - 30 Days,By Journal postings
Deticked all check boxes in it.
Aging report total balance of all vendor does not match with account payable balance in Trial balance ?
But for reconciled aging totals and trial balance total are same.
How to solve it ? or i need to do any settings ?
Jeyakanthan

Hai!
What version of SAP B1 u r using.
I do got the same problem for my customer. I did this..
1. Run Aging Report for all Vendors. Donot check Recon Transaction.
2. Export to Excel
3. Run TB for BP selecting Vendors alone.
4. Export TB to Excel.
5. Find vendors who is having mismatch in their balance. (use V-Lookup in Excel)
6. Run Detail G/L Transaction report for those Vendors one by one.
*Selection from date: Age from date To date: Age To date *
*Selection Reconcilled Transaction only
7. Report Balance should be Zero. If not this problem is because of Internal Reconcillation.
8. Open *Check and Restore Previous reconcillation * select the vendor, internal
9. see the reconcillation details.
10. see the posting dates. All should be in previous fiscal year. (I mean the reconcilled set should have same fiscal year ex: Recon -2 trans should be in same fiscal year)
11. If, that is corrected and still difference exist means.
12.Go to Manage Previous Reconcillation
13. Select BP and Internal (Donot check system reconcill Trans)
14. Check the Reconcillation wheather all in same fiscal year.
Regards,
Thanga Raj.K
+91 9710445987

GR/IR account G/L balance does not match with BSIS table

Hi,
I am preparing a report which uses table BSIS.But the total in the table does not match with the GR/IR G/L balance account.When I click on balance item display in FS10N the entries match with that of BSIS but the total is different.Also how to factor the year opening balance entries in the report.
Thanks
Arun

But that will slow down the system considerabley, because BSEG contains a huge data

Getting error when view - Requested data type does not match with existing

I have the siebel web service
In the BI publisher as mentioned in the 'Siebel_BI_Publisher_Integration_Concepts.pdf', I have imported the siebel web service
BI can recognize the 'Web service' and methods.
I have created the paramters. The data type is 'String'
When I try to view the report using the BI publisher, I am getting teh following error in th UI
"Requested data type does not match with existing data type"
This is the first time I am using BI publisher to call the Siebel web service. I don't know what this error means
I don't know whether any log file generated wit the details of this erro message
Any help is much appriciated
Thanks,
Kavitha

Hi all,
have you find a fix for this issue? Im facing the same situation, using Complex type, and String data type both in the service and Bi publisher. We are consuming CC&B services, and we have noticed this error appears when BIPublisher is running on WebLogic (10.3) but it does not appear when BIPublisher is running on OC4J , of course running the same report on both application servers.
Any idea?
Thanks a lot, regards
Nestor

Final payment register does not match with Preliminary register and does

Final payment register -does not match with Preliminary payment reigster- it should have invoice number and PO Number whereas Preliminary payment register has INvoice but does not have a PO number .Cheques issue they would like to see -against which system generated PO only

Please see these docs/links.
R12: What replaces the 11i Preliminary Payment Register? [ID 750109.1]
What Happened To The Preliminary And Final Payment Register In R12? [ID 746339.1]
EBS File Comparison Report Now Available
https://blogs.oracle.com/stevenChan/entry/ebs_file_comparison_report_now
Thanks,
Hussein

Receipt Qty in AP invoice does not match with actual receipt qty.

Hello everyone,
I am facing an issue in oracle Payables module. When we match invoice with receipt while preparing invoices, Quantity received shown in the Receipt quantity block in invoice window does not match with actual receipt quantity of that item. Due to this difference user is not able to book the invoice. Please help me to resolve this issue.
Thanks,
Himanshu Gupta

Exactly. What i mean is in the invoice window, There is a block called reciept quantity shown in the lower part. The received quantity displayed in that block is more the actual quantity being recieved. (when we see the recieving transactions). is this a bug?
thanks for your reply, awaiting your response......
Himanshu Gupta

The SYSVAL table entry for the database version (16) does not match the required version

We upgraded from Tidal Enterprise Scheduler (TES) 5.31 to 6.1 on fresh Windows x64 2008 R2 servers. I did a fresh install but our DBA restored a copy of our database from pre-prod which was at 5.31. I get the error below. Note, SQL went from 2005 to 2012 during this upgrade. Do I need to change a value in this table to reflect the SQL change?
[04/29 12:47:14:198]:TIDAL Enterprise Scheduler: version 6.1.0.133
[04/29 12:47:14:198]:Java version: 1.8.0
[04/29 12:47:14:198]:Java Virtual Machine version: 25.0-b70
[04/29 12:47:14:198]:Start Time : 04/29/14 12:47:14:198
[04/29 12:47:14:198]:----------------------------------------------------------------------------
[04/29 12:47:14:198]:Database URL :jdbc:sqlserver://SQL2012-Host:1433;responseBuffering=adaptive
[04/29 12:47:14:198]:Database Driver :com.microsoft.sqlserver.jdbc.SQLServerDriver
[04/29 12:47:14:198]:Maximum number of log files = 100
[04/29 12:47:14:198]:Added a LogFile called 'RegularFile'
[04/29 12:47:14:198]:LogManager: setting default log
[04/29 12:47:14:214]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:14:495]:MessageBroker: Instantiated TcpTransportServer (URI = tcp://0.0.0.0:6215)
[04/29 12:47:16:975]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:17:272]:The SYSVAL table entry for the database version (16) does not match the required version (23). Shutting down.
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:Shutting down the application

I had this error last night while applying a patch to 6.0. However in my case the version was 21 versus a required version of 23.
As far as i know 6.1 is not compatible with the 5 db schema, so you will need an update / migration plan for the db also.

The affinity mask specified does not match the CPU mask on this system.

We are having a problem with one of our SQL servers, and in comparing it to the backup server which is working fine, I noticed some differences. I attempted to correct the differences, but no luck.
The dell server has 4 dual-core processors and at one point hyper-threading was enabled. One of our DBAs recommended that it be turned off. We didn't have any major problems until recently and it seems that getting this setting right is the lynchpin. Any suggestions?
John
EXEC sys.sp_configure N'show advanced options', N'1' RECONFIGURE WITH OVERRIDE
GO
EXEC sys.sp_configure N'affinity mask', N'0'
GO
EXEC sys.sp_configure N'affinity I/O mask', N'0'
GO
RECONFIGURE WITH OVERRIDE
GO
EXEC sys.sp_configure N'show advanced options', N'0' RECONFIGURE WITH OVERRIDE
GO
Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install.
Msg 5832, Level 16, State 1, Line 1
The affinity mask specified does not match the CPU mask on this system.
Msg 15123, Level 16, State 1, Procedure sp_configure, Line 51
The configuration option 'affinity mask' does not exist, or it may be an advanced option.
Msg 15123, Level 16, State 1, Procedure sp_configure, Line 51
The configuration option 'affinity I/O mask' does not exist, or it may be an advanced option.
Msg 5832, Level 16, State 1, Line 1
The affinity mask specified does not match the CPU mask on this system.
Configuration option 'show advanced options' changed from 1 to 0. Run the RECONFIGURE statement to install.
Msg 5832, Level 16, State 1, Line 1
The affinity mask specified does not match the CPU mask on this system.

I had P2V'd a SQL 2008 server and was having this issue. I tried everything I could find to get the affinity corrected; setting the Lock Pages security policy, trying the affinity commands in Single User mode, etc.
Then wrighbar's response got me headed in the right direction, but I ran into an issue where the previous engineer had set the Physical SQL server to have affinity on procs 9-16 of a 16 proc box, I could only set up to 8 procs on my VM. After searching
for a while for registry keys or config files that might be editable to change the affinity I couldn't find where SQL got that information from. Finally it hit me, maybe it's stored in the master or msdb datatbases.
SOLUTION: I was able to go back to the original Physical machine, change the affinity settings there, Stop SQL on both boxes, then copied MASTER, MODEL, MSDB, TEMPDB from the original Physical machine to the new virtual machine. All services started
OK on the virtual machine now and affinity was set the way I needed it.

The report MC+E does not match with F.01

Similar Messages

Maybe you are looking for