The "Reset Firefox" button is missing from the Troubleshooting Information page in Waterfox v. 26.0.

Upon opening Waterfox I see a message at the bottom of the screen indicating that Waterfox is slow in opening. When I follow the link to find a fix for it, I get the page instructing me on how to reset the programme via the Troubleshooting Information page. However, the "Reset Firefox" button shown in the example is missing from the page in Waterfox.

You only see the reset button on the "Help > Troubleshooting Information" page if you use the profile that is marked as Default=1 in the profiles.ini file.
If you do not have the "Reset" button then either use the Profile Manager to create a new profile or use the Profile Manager to start with the current default profile to get the reset button in Firefox.
*http://kb.mozillazine.org/Profile_Manager
*https://support.mozilla.org/kb/Managing+profiles

Similar Messages

  • Firefox 4 the "close tab" button is missing from the "File" pull down

    In Firefox 4 the "close tab" button does not appear in the "File" pull down.
    This button does appear in Firefox 3.6.16 but is now gone.
    I need it when I have two windows open, each with one tab open and I want to close one window.
    The only option presented to me is "Quit" which closes both windows...

    I agree with what you said,
    "OK. While of nuisance value [why isn't this the default?]"
    Why isn't it the default?
    Why force users to switch from a mouse to a keyboard (control-w) just to close a tab?

  • Reset firefox button does not appear in Troubleshooting information. Not even in safe mode. Every time I shut down computer firefox loses my profile.

    As stated above, firefox loses my profile every time I restart the computor. I have created new profiles and changed the location and changed it back again to no avail. I now want to just restart firefox in default mode but the default button does not appear, not even in safe mode.

    Yes. Sorry, I should have mentioned that there have been several reboots involved during the troubleshooting.
    I am running Firefox in an admin level account in this case - so, there shouldn't be any permission issues there.
    I have tried shutting down both the desktop firewall software, and the anti-virus, and the problem still persists exactly as described. (Obviously, I disconnected the system when I did that [smile].)
    All other software on the system that I have tried, interacts with the file dialog just fine ... so, I don't think it is anything central like some corruption associated with the file dialog itself.
    As I said, it is most perplexing.

  • The bookmarks button is missing from the navigation tool bar. When I right click and select customize it appears and when I click done on the customization box button, it disappears.

    The bookmarks button is missing from the navigation toolbar. It appears when I right click on the navigation and click customize. As soon as I close the customization window it disappears again. I can no longer access the library to back up my bookmarks. Why did you change it from Firefox 3 where you could clock on the bookmarks tab and be able to backup your bookmarks?

    Actually the Bookmarks Menu button doesn't appear because you have the Menu Bar visible in your first screenshot. The Bookmarks Menu button should appear to the right of the overflow chevron on the Bookmarks Toolbar if the Menu Bar is hidden.

  • MissingFieldException[ The following required field is missing from the lau

    Hi, I'm new to this forum so please put this thread in the right place if I have made a mistake.
    But here's my problem:
    I'm using jre 7 with the latest version.
    I downloaded and wanted to launch a Java based .jar game, which runs perfectly for the other users but my JRE gives the following error:
    Application error - unable to launch the application.
    MissingFieldException[ The following required field is missing from the launch file: <jnlp>]
         at com.sun.javaws.jnl.XMLFormat.parse(Unknown Source)
         at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
         at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
         at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
         at com.sun.javaws.Main.launchApp(Unknown Source)
         at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
         at com.sun.javaws.Main.access$000(Unknown Source)
         at com.sun.javaws.Main$1.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    On the forum where is the game developed i got the following answer:
    ''+it seems your OS/jre installation tries to start the jar as an applet which fails, because it's a regular application and not an applet. is there any way you can convince your jre to start LS as an application? i would like to give better/more detailed advice, but i'm not running windows, so i can't check for myself/try to work out a step-by-step guide.+ ''
    As I have browsed the internet for hours and haven't come up with a solution I'm asking for some help.

    That error seems to indicate that the JNLP file is broken because it is missing the starting starting <jnlp> XML tag; I'll take a guess and just say that it is completely empty. Since it works for other users, apparently somehow when you download it on your computer you end up with a broken file. No idea why, no way for me to know why either. I don't have access to your computer. All I can say is: try in another browser and if that doesn't work, try on another computer. If it works there, well then you may have to face the fact that your computer might need a clean install.
    And PS: this is a Java programming forum, not technical support for whatever game you want to play that just happens to use Java.

  • Error: The following required field is missing from the launch file: jnlp

    PLEASE help me.
    I was at Starbuck's today trying to install new software for my new wireless internet card and when I finished I could no longer access any of my applications that require java... I have a macbook pro dual platform computer. When I try to access www.bayphoto.com to download my application it says: (see below) (which I think is strange because it's all about Starbuck's and it should be my java code- I think...). Like I said - I have no idea what's going on or how to fix this. Please help me or at least tell me whom to call- I feel so stupid- I just need help- ATT? Starbuck's? Sun?
    Error: The following required field is missing from the launch file: <jnlp>
    Under the "exceptions" tab it says:
    MissingFieldException[ The following required field is missing from the launch file: <jnlp>]
         at com.sun.javaws.jnl.XMLFormat.parse(XMLFormat.java:88)
         at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(LaunchDescFactory.java:52)
         at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(LaunchDescFactory.java:64)
         at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(LaunchDescFactory.java:72)
         at com.sun.javaws.Launcher.updateFinalLaunchDesc(Launcher.java:214)
         at com.sun.javaws.Launcher.prepareToLaunch(Launcher.java:127)
         at com.sun.javaws.Launcher.launch(Launcher.java:95)
         at com.sun.javaws.Main.launchApp(Main.java:305)
         at com.sun.javaws.Main.continueInSecureThread(Main.java:213)
         at com.sun.javaws.Main$1.run(Main.java:108)
         at java.lang.Thread.run(Thread.java:613)
    Under the "launch file tab" it says:
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
    <head>
    <title>AT&T Wi-Fi Service @ Starbucks</title>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <meta name="description" content="Starbucks Entertainment presented by AT&T Hotspot" />
    <meta name="keywords" content="AT&T, Starbucks, Wi-fi, Wifi, Hotspot, coffee, music, books, games, fresh sheet, third place, online" />
    <meta name="author" content="Starbucks Entertainment" />
    <link rel="shortcut icon" type="image/ico" href="/favicon.ico" />
    <script type="text/javascript" language="javascript" src="/dhtml/master.js"></script>
    <script type="text/javascript" language="javascript" src="/dhtml/x_core.js"></script>
    <script type="text/javascript" language="javascript" src="/dhtml/x_event.js"></script>
    <script type="text/javascript" language="javascript" src="/dhtml/x_xhr.js"></script>
    <script type="text/javascript" src="/dhtml/att/dhtml.js"></script>
    <style type="text/css">
    copied from starbucks master.css
    body {
         background:#200D06 url("/graphics/att/themes/sbux/hotspot_bkgd.jpg") repeat-x scroll;
         color:#555555;
         font-family:Arial,Helvetica,sans-serif;
         font-size:small;
         line-height:1.5em;
         margin:0pt;
         padding:0pt;
         text-align:center;
    #wrap {
         font-size:95%;
         margin:0pt auto;
         text-align:left;
         width:980px;
    #starbucksframe {
         margin:15px 0pt 0pt;
         padding:0pt;
    /*our addendae*/
    div#header {
         height:95px;
         width:980px;
         background-image:url("/graphics/att/themes/sbux/header_bg.jpg");
         background-repeat:no-repeat;
         margin:0px;
         background-top:0px;
         background-left:0px;
         background-color:transparent;
    div#btn_ctti {
         position:absolute;
         top:10px;
         margin-left:388px;
    div#sbux_lfrm {
         display:inline;
         font-size:10px;
         color:#FFFFFF;
         margin-left:245px;
         top:49px;
         position:absolute;
         line-height:10px;
         font-family:verdana,arial,helvetica,sans-serif;
    div#sbux_lfrm form {
         margin:0px;
    div#sbux_lfrm a, div#sbux_lfrm a:link, div#sbux_lfrm a:hover, div#sbux_lfrm a:active, div#sbux_lfrm a:hover {
         color:#FFFFFF;
    div#sbux_lfrm form label {
         display:none;
         visibility:hidden;
    div#sbux_lfrm form input, div#sbux_lfrm form select {
         font-family:verdana,arial,helvetica,sans-serif;
         vertical-align:middle;
    div#sbux_lfrm input.example {
         color:#656565;
    #sbux_lfrm_row1, #sbux_lfrm_row2 {
         margin:0px;
    #sbux_lfrm input#username, #sbux_lfrm input#password, #sbux_lfrm input#password_pw {
         width:136px;
         margin-right:6px;
         font-size:10px;
    #sbux_lfrm select#roamRealm {
         width:130px;
         font-size:10px;
         color:#656565;
         margin-right:6px;
    #sbux_lfrm_row2 {
         position:absolute;
         top:21px;
         left:-4px;
    div#aupAgree_row {
         margin-top:4px;
         position:relative;
         left:-4px;
    div#aup_box {
         float:left;
         position:relative;
         top:-3px;
    div#aup_text {
         float:left;
         line-height:10px;
    div#tm_badge {
         width:115px;
         height:94px;
         float:right;
         margin-right:0px;
         margin-top:0px;
    div#password_value {
         display:inline;
    div#hidden_pw_field {
         display:none;
         visibility:hidden;
    div#sbux_lfrm.css_form {
         margin-top:0px;
    </style>
    <style>
    /* IE specs */
    body {
         font-size: x-small; /* IE5 Win */
         voice-family: "\"}\"";
         voice-family: inherit;
         font-size: small;
    html>body { /* be nice to Opera */
         font-size: small;
    /* self-clearing floats
    /* trigger hasLayout and target ie5+6/win only */
    *:first-child+html #header,
    *:first-child+html #login_wrapper {
         height:95px;
    #ny_legal {
         color:#CAC3BF;
         font-size:11px;
         font-weight:bold;
         padding:0;
    #ny_legal a:link {
         color:#CAC3BF;
         font-size:11px;
         font-weight:bold;
         padding:0;
    </style>
    </html>
    TOO LONG TO INCLUDE ALL CODE

    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp codebase="file:///C:\eclipse\workspace\studentconverter\webroot" href="studentconverter.jar" >two things wrong here -
    first codebase is not legal URL, File.separator (backslash on windows) needs to be converted to forward slash in URL's.
    second, the href is not to the jnlp file, it is to the jar !
    href="studentconverter.jar" - should this be href="studentconverter.jnlp" ?
    /Dietz

  • "The EXCH provider section is missing from the Autodiscover response." On single mailbox

    We have a single mailbox with this issue, the RCA tool returns the message:
     The EXCH provider section is missing from the Autodiscover response.
    No other mailboxes have issues with Outlook anywhere but this one user is unable to use their mailbox from Outlook. I tried creating a fresh mailbox for this user and completely deleted the old one but this didn't seem to work. anyone have any ideas on how
    I can resolve this?
    This is Exchange 2010, SP1 with all update rollups applied.

    This workstation's network connectivity is okay. And a test with any other user account information from the same station is successful. I've tried this from both a domain and non-domain station with the same results. But this test was from a domain machine.
    Also note that our internal and external URIs are identical as the CAS server is the same for both.
    Here is the full RCA output.
    Testing RPC/HTTP connectivity.
     The RPC/HTTP test failed.
     Test Steps
     ExRCA is attempting to test Autodiscover for
    [email protected].
     Autodiscover was tested successfully.
     Test Steps
     Attempting each method of contacting the Autodiscover service.
     The Autodiscover service was tested successfully.
     Test Steps
     Attempting to test potential Autodiscover URL
    https://research.osu.edu/AutoDiscover/AutoDiscover.xml
     Testing of this potential Autodiscover URL failed.
     Test Steps
     Attempting to resolve the host name research.osu.edu in DNS.
     The host name resolved successfully.
     Additional Details
     IP addresses returned: 140.254.87.75
    Testing TCP port 443 on host research.osu.edu to ensure it's listening and open.
     The specified port is either blocked, not listening, or not producing the expected response.
      Tell me more about this issue and how to resolve it
     Additional Details
     A network error occurred while communicating with the remote host.
    Attempting to test potential Autodiscover URL
    https://autodiscover.research.osu.edu/AutoDiscover/AutoDiscover.xml
     Testing of this potential Autodiscover URL failed.
     Test Steps
     Attempting to resolve the host name autodiscover.research.osu.edu in DNS.
     The host name couldn't be resolved.
      Tell me more about this issue and how to resolve it
     Additional Details
     Host autodiscover.research.osu.edu couldn't be resolved in DNS InfoDomainNonexistent.
    Attempting to contact the Autodiscover service using the HTTP redirect method.
     The attempt to contact Autodiscover using the HTTP Redirect method failed.
     Test Steps
     Attempting to resolve the host name autodiscover.research.osu.edu in DNS.
     The host name couldn't be resolved.
      Tell me more about this issue and how to resolve it
     Additional Details
     Host autodiscover.research.osu.edu couldn't be resolved in DNS InfoDomainNonexistent.
    Attempting to contact the Autodiscover service using the DNS SRV redirect method.
     ExRCA successfully contacted the Autodiscover service using the DNS SRV redirect method.
     Test Steps
     Attempting to locate SRV record _autodiscover._tcp.research.osu.edu in DNS.
     The Autodiscover SRV record was successfully retrieved from DNS.
     Additional Details
     The Service Location (SRV) record lookup returned host mail.research.osu.edu.
    Attempting to test potential Autodiscover URL
    https://mail.research.osu.edu/Autodiscover/Autodiscover.xml
     Testing of the Autodiscover URL was successful.
     Test Steps
     Attempting to resolve the host name mail.research.osu.edu in DNS.
     The host name resolved successfully.
     Additional Details
     IP addresses returned: 131.187.90.221
    Testing TCP port 443 on host mail.research.osu.edu to ensure it's listening and open.
     The port was opened successfully.
    Testing the SSL certificate to make sure it's valid.
     The certificate passed all validation requirements.
     Test Steps
     ExRCA is attempting to obtain the SSL certificate from remote server mail.research.osu.edu on port 443.
     ExRCA successfully obtained the remote SSL certificate.
     Additional Details
     Remote Certificate Subject: CN=mail.research.osu.edu, OU=Office of Research, O=The Ohio State University, STREET=154 W 12th Avenue, L=Columbus, S=OH, PostalCode=43210, C=US, Issuer: CN=InCommon Server CA, OU=InCommon, O=Internet2, C=US.
    Validating the certificate name.
     The certificate name was validated successfully.
     Additional Details
     Host name mail.research.osu.edu was found in the Certificate Subject Common name.
    Certificate trust is being validated.
     The certificate is trusted and all certificates are present in the chain.
     Test Steps
     ExRCA is attempting to build certificate chains for certificate CN=mail.research.osu.edu, OU=Office of Research, O=The Ohio State University, STREET=154 W 12th Avenue, L=Columbus, S=OH, PostalCode=43210, C=US.
     One or more certificate chains were constructed successfully.
     Additional Details
     A total of 1 chains were built. The highest quality chain ends in root certificate CN=AddTrust External CA Root, OU=AddTrust External TTP Network, O=AddTrust AB, C=SE.
    Analyzing the certificate chains for compatibility problems with versions of Windows.
     Potential compatibility problems were identified with some versions of Windows.
     Additional Details
     ExRCA can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled.
    Testing the certificate date to confirm the certificate is valid.
     Date validation passed. The certificate hasn't expired.
     Additional Details
     The certificate is valid. NotBefore = 6/23/2011 12:00:00 AM, NotAfter = 6/22/2012 11:59:59 PM
    Checking the IIS configuration for client certificate authentication.
     Client certificate authentication wasn't detected.
     Additional Details
     Accept/Require Client Certificates isn't configured.
    Attempting to send an Autodiscover POST request to potential Autodiscover URLs.
     ExRCA successfully retrieved Autodiscover settings by sending an Autodiscover POST.
     Test Steps
     ExRCA is attempting to retrieve an XML Autodiscover response from URL
    https://mail.research.osu.edu/Autodiscover/Autodiscover.xml for user
    [email protected].
     The Autodiscover XML response was successfully retrieved.
     Additional Details
     Autodiscover Account Settings
    XML response:
    <?xml version="1.0"?>
    <Autodiscover xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
    <Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
    <User>
    <DisplayName>Alba, Andrea</DisplayName>
    <LegacyDN>/o=Research Foundation/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Alba, Andrea</LegacyDN>
    <DeploymentId>75b2e554-1712-4be1-94e6-ed12513f8395</DeploymentId>
    </User>
    <Account>
    <AccountType>email</AccountType>
    <Action>settings</Action>
    <Protocol>
    <Type>WEB</Type>
    <Port>0</Port>
    <DirectoryPort>0</DirectoryPort>
    <ReferralPort>0</ReferralPort>
    <Internal>
    <OWAUrl AuthenticationMethod="Basic, Fba">https://mail.research.osu.edu/owa/</OWAUrl>
    </Internal>
    <External>
    <OWAUrl AuthenticationMethod="Fba">https://mail.research.osu.edu/owa/</OWAUrl>
    </External>
    </Protocol>
    </Account>
    </Response>
    </Autodiscover>
    Autodiscover settings for Outlook Anywhere are being validated.
     ExRCA wasn't able to validate Outlook Anywhere Autodiscover settings.
     Additional Details
     The EXCH provider section is missing from the Autodiscover response.
    And then a test with a different user:
    Testing RPC/HTTP connectivity.
     The RPC/HTTP test completed successfully.
     Test Steps
     ExRCA is attempting to test Autodiscover for
    [email protected].
     Autodiscover was tested successfully.
     Test Steps
     Attempting each method of contacting the Autodiscover service.
     The Autodiscover service was tested successfully.
     Test Steps
     Attempting to test potential Autodiscover URL
    https://research.osu.edu/AutoDiscover/AutoDiscover.xml
     Testing of this potential Autodiscover URL failed.
     Test Steps
     Attempting to resolve the host name research.osu.edu in DNS.
     The host name resolved successfully.
     Additional Details
     IP addresses returned: 140.254.87.75
    Testing TCP port 443 on host research.osu.edu to ensure it's listening and open.
     The specified port is either blocked, not listening, or not producing the expected response.
      Tell me more about this issue and how to resolve it
     Additional Details
     A network error occurred while communicating with the remote host.
    Attempting to test potential Autodiscover URL
    https://autodiscover.research.osu.edu/AutoDiscover/AutoDiscover.xml
     Testing of this potential Autodiscover URL failed.
     Test Steps
     Attempting to resolve the host name autodiscover.research.osu.edu in DNS.
     The host name couldn't be resolved.
      Tell me more about this issue and how to resolve it
     Additional Details
     Host autodiscover.research.osu.edu couldn't be resolved in DNS InfoDomainNonexistent.
    Attempting to contact the Autodiscover service using the HTTP redirect method.
     The attempt to contact Autodiscover using the HTTP Redirect method failed.
     Test Steps
     Attempting to resolve the host name autodiscover.research.osu.edu in DNS.
     The host name couldn't be resolved.
      Tell me more about this issue and how to resolve it
     Additional Details
     Host autodiscover.research.osu.edu couldn't be resolved in DNS InfoDomainNonexistent.
    Attempting to contact the Autodiscover service using the DNS SRV redirect method.
     ExRCA successfully contacted the Autodiscover service using the DNS SRV redirect method.
     Test Steps
     Attempting to locate SRV record _autodiscover._tcp.research.osu.edu in DNS.
     The Autodiscover SRV record was successfully retrieved from DNS.
     Additional Details
     The Service Location (SRV) record lookup returned host mail.research.osu.edu.
    Attempting to test potential Autodiscover URL
    https://mail.research.osu.edu/Autodiscover/Autodiscover.xml
     Testing of the Autodiscover URL was successful.
     Test Steps
     Attempting to resolve the host name mail.research.osu.edu in DNS.
     The host name resolved successfully.
     Additional Details
     IP addresses returned: 131.187.90.221
    Testing TCP port 443 on host mail.research.osu.edu to ensure it's listening and open.
     The port was opened successfully.
    Testing the SSL certificate to make sure it's valid.
     The certificate passed all validation requirements.
     Test Steps
     ExRCA is attempting to obtain the SSL certificate from remote server mail.research.osu.edu on port 443.
     ExRCA successfully obtained the remote SSL certificate.
     Additional Details
     Remote Certificate Subject: CN=mail.research.osu.edu, OU=Office of Research, O=The Ohio State University, STREET=154 W 12th Avenue, L=Columbus, S=OH, PostalCode=43210, C=US, Issuer: CN=InCommon Server CA, OU=InCommon, O=Internet2, C=US.
    Validating the certificate name.
     The certificate name was validated successfully.
     Additional Details
     Host name mail.research.osu.edu was found in the Certificate Subject Common name.
    Certificate trust is being validated.
     The certificate is trusted and all certificates are present in the chain.
     Test Steps
     ExRCA is attempting to build certificate chains for certificate CN=mail.research.osu.edu, OU=Office of Research, O=The Ohio State University, STREET=154 W 12th Avenue, L=Columbus, S=OH, PostalCode=43210, C=US.
     One or more certificate chains were constructed successfully.
     Additional Details
     A total of 1 chains were built. The highest quality chain ends in root certificate CN=AddTrust External CA Root, OU=AddTrust External TTP Network, O=AddTrust AB, C=SE.
    Analyzing the certificate chains for compatibility problems with versions of Windows.
     Potential compatibility problems were identified with some versions of Windows.
     Additional Details
     ExRCA can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled.
    Testing the certificate date to confirm the certificate is valid.
     Date validation passed. The certificate hasn't expired.
     Additional Details
     The certificate is valid. NotBefore = 6/23/2011 12:00:00 AM, NotAfter = 6/22/2012 11:59:59 PM
    Checking the IIS configuration for client certificate authentication.
     Client certificate authentication wasn't detected.
     Additional Details
     Accept/Require Client Certificates isn't configured.
    Attempting to send an Autodiscover POST request to potential Autodiscover URLs.
     ExRCA successfully retrieved Autodiscover settings by sending an Autodiscover POST.
     Test Steps
     ExRCA is attempting to retrieve an XML Autodiscover response from URL
    https://mail.research.osu.edu/Autodiscover/Autodiscover.xml for user
    [email protected].
     The Autodiscover XML response was successfully retrieved.
     Additional Details
     Autodiscover Account Settings
    XML response:
    <?xml version="1.0"?>
    <Autodiscover xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
    <Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
    <User>
    <DisplayName>Bossley, Peter A</DisplayName>
    <LegacyDN>/o=Research Foundation/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Bossley, Peter A</LegacyDN>
    <DeploymentId>75b2e554-1712-4be1-94e6-ed12513f8395</DeploymentId>
    </User>
    <Account>
    <AccountType>email</AccountType>
    <Action>settings</Action>
    <Protocol>
    <Type>EXCH</Type>
    <Server>MAIL.rf.ohio-state.edu</Server>
    <ServerDN>/o=Research Foundation/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=MAIL</ServerDN>
    <ServerVersion>738180DA</ServerVersion>
    <MdbDN>/o=Research Foundation/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=MAIL/cn=Microsoft Private MDB</MdbDN>
    <ASUrl>https://mail.research.osu.edu/EWS/Exchange.asmx</ASUrl>
    <OOFUrl>https://mail.research.osu.edu/EWS/Exchange.asmx</OOFUrl>
    <OABUrl>https://mail.research.osu.edu/OAB/e5ee959b-e4f0-4bd3-b254-bc2f822455f6/</OABUrl>
    <UMUrl>https://mail.research.osu.edu/EWS/UM2007Legacy.asmx</UMUrl>
    <Port>0</Port>
    <DirectoryPort>0</DirectoryPort>
    <ReferralPort>0</ReferralPort>
    <PublicFolderServer>MAIL.rf.ohio-state.edu</PublicFolderServer>
    <AD>DC3.rf.ohio-state.edu</AD>
    <EwsUrl>https://mail.research.osu.edu/EWS/Exchange.asmx</EwsUrl>
    <EcpUrl>https://mail.research.osu.edu/ecp/</EcpUrl>
    <EcpUrl-um>?p=customize/voicemail.aspx&amp;exsvurl=1</EcpUrl-um>
    <EcpUrl-aggr>?p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1</EcpUrl-aggr>
    <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;</EcpUrl-mt>
    <EcpUrl-ret>?p=organize/retentionpolicytags.slab&amp;exsvurl=1</EcpUrl-ret>
    <EcpUrl-sms>?p=sms/textmessaging.slab&amp;exsvurl=1</EcpUrl-sms>
    </Protocol>
    <Protocol>
    <Type>EXPR</Type>
    <Server>mail.research.osu.edu</Server>
    <ASUrl>https://mail.research.osu.edu/EWS/Exchange.asmx</ASUrl>
    <OOFUrl>https://mail.research.osu.edu/EWS/Exchange.asmx</OOFUrl>
    <OABUrl>https://mail.research.osu.edu/OAB/e5ee959b-e4f0-4bd3-b254-bc2f822455f6/</OABUrl>
    <UMUrl>https://mail.research.osu.edu/EWS/UM2007Legacy.asmx</UMUrl>
    <Port>0</Port>
    <DirectoryPort>0</DirectoryPort>
    <ReferralPort>0</ReferralPort>
    <SSL>On</SSL>
    <AuthPackage>Ntlm</AuthPackage>
    <EwsUrl>https://mail.research.osu.edu/EWS/Exchange.asmx</EwsUrl>
    <EcpUrl>https://mail.research.osu.edu/ecp/</EcpUrl>
    <EcpUrl-um>?p=customize/voicemail.aspx&amp;exsvurl=1</EcpUrl-um>
    <EcpUrl-aggr>?p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1</EcpUrl-aggr>
    <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;</EcpUrl-mt>
    <EcpUrl-ret>?p=organize/retentionpolicytags.slab&amp;exsvurl=1</EcpUrl-ret>
    <EcpUrl-sms>?p=sms/textmessaging.slab&amp;exsvurl=1</EcpUrl-sms>
    </Protocol>
    <Protocol>
    <Type>WEB</Type>
    <Port>0</Port>
    <DirectoryPort>0</DirectoryPort>
    <ReferralPort>0</ReferralPort>
    <Internal>
    <OWAUrl AuthenticationMethod="Basic, Fba">https://mail.research.osu.edu/owa/</OWAUrl>
    <Protocol>
    <Type>EXCH</Type>
    <ASUrl>https://mail.research.osu.edu/EWS/Exchange.asmx</ASUrl>
    </Protocol>
    </Internal>
    <External>
    <OWAUrl AuthenticationMethod="Fba">https://mail.research.osu.edu/owa/</OWAUrl>
    <Protocol>
    <Type>EXPR</Type>
    <ASUrl>https://mail.research.osu.edu/EWS/Exchange.asmx</ASUrl>
    </Protocol>
    </External>
    </Protocol>
    </Account>
    </Response>
    </Autodiscover>
    Autodiscover settings for Outlook Anywhere are being validated.
     ExRCA validated the Outlook Anywhere Autodiscover settings.
    Attempting to resolve the host name mail.research.osu.edu in DNS.
     The host name resolved successfully.
     Additional Details
     IP addresses returned: 131.187.90.221
    Testing TCP port 443 on host mail.research.osu.edu to ensure it's listening and open.
     The port was opened successfully.
    Testing the SSL certificate to make sure it's valid.
     The certificate passed all validation requirements.
     Test Steps
     ExRCA is attempting to obtain the SSL certificate from remote server mail.research.osu.edu on port 443.
     ExRCA successfully obtained the remote SSL certificate.
     Additional Details
     Remote Certificate Subject: CN=mail.research.osu.edu, OU=Office of Research, O=The Ohio State University, STREET=154 W 12th Avenue, L=Columbus, S=OH, PostalCode=43210, C=US, Issuer: CN=InCommon Server CA, OU=InCommon, O=Internet2, C=US.
    Validating the certificate name.
     The certificate name was validated successfully.
     Additional Details
     Host name mail.research.osu.edu was found in the Certificate Subject Common name.
    Certificate trust is being validated.
     The certificate is trusted and all certificates are present in the chain.
     Test Steps
     ExRCA is attempting to build certificate chains for certificate CN=mail.research.osu.edu, OU=Office of Research, O=The Ohio State University, STREET=154 W 12th Avenue, L=Columbus, S=OH, PostalCode=43210, C=US.
     One or more certificate chains were constructed successfully.
     Additional Details
     A total of 1 chains were built. The highest quality chain ends in root certificate CN=AddTrust External CA Root, OU=AddTrust External TTP Network, O=AddTrust AB, C=SE.
    Analyzing the certificate chains for compatibility problems with versions of Windows.
     Potential compatibility problems were identified with some versions of Windows.
     Additional Details
     ExRCA can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled.
    Testing the certificate date to confirm the certificate is valid.
     Date validation passed. The certificate hasn't expired.
     Additional Details
     The certificate is valid. NotBefore = 6/23/2011 12:00:00 AM, NotAfter = 6/22/2012 11:59:59 PM
    Checking the IIS configuration for client certificate authentication.
     Client certificate authentication wasn't detected.
     Additional Details
     Accept/Require Client Certificates isn't configured.
    Testing HTTP Authentication Methods for URL
    https://mail.research.osu.edu/rpc/rpcproxy.dll.
     The HTTP authentication methods are correct.
     Additional Details
     ExRCA found all expected authentication methods and no disallowed methods. Methods found: Negotiate, NTLM
    Testing SSL mutual authentication with the RPC proxy server.
     Mutual authentication was verified successfully.
     Additional Details
     Certificate common name mail.research.osu.edu matches msstd:mail.research.osu.edu.
    Attempting to ping RPC proxy mail.research.osu.edu.
     RPC Proxy was pinged successfully.
     Additional Details
     Completed with HTTP status 200 - OK
    Attempting to ping RPC endpoint 6001 (Exchange Information Store) on server MAIL.rf.ohio-state.edu.
     The endpoint was pinged successfully.
     Additional Details
     RPC Status Ok (0) returned in 546 ms.
    Testing the Name Service Provider Interface (NSPI) on the Exchange Mailbox server.
     The NSPI interface was tested successfully.
     Test Steps
     Attempting to ping RPC endpoint 6004 (NSPI Proxy Interface) on server MAIL.rf.ohio-state.edu.
     The endpoint was pinged successfully.
     Additional Details
     RPC Status Ok (0) returned in 483 ms.
    Testing NSPI "Check Name" for user
    [email protected] against server MAIL.rf.ohio-state.edu.
     Check Name succeeded.
     Additional Details
     DisplayName: Bossley, Peter A, LegDN: /o=Research Foundation/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Bossley, Peter A
    Testing the Referral service on the Exchange Mailbox server.
     The Referral service was tested successfully.
     Test Steps
     Attempting to ping RPC endpoint 6002 (Referral Interface) on server MAIL.rf.ohio-state.edu.
     The endpoint was pinged successfully.
     Additional Details
     RPC Status Ok (0) returned in 492 ms.
    Attempting to perform referral for user /o=Research Foundation/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Bossley, Peter A on server MAIL.rf.ohio-state.edu.
     ExRCA successfully got the referral.
     Additional Details
     The server returned by the Referral service: MAIL.rf.ohio-state.edu
    Testing the Exchange Information Store on the Mailbox server.
     ExRCA successfully tested the Information Store.
     Test Steps
     Attempting to ping RPC endpoint 6001 (Exchange Information Store) on server MAIL.rf.ohio-state.edu.
     The endpoint was pinged successfully.
     Additional Details
     RPC Status Ok (0) returned in 15 ms.
    Attempting to log on to the Exchange Information Store.
     ExRCA successfully logged on to the Information Store.
    Any other ideas?
    thanks!

  • Missing ADOBE ICONSHow can i get the icon of the pdf back ; its is missing from the desk adobe

    How can i get the icon of the pdf back ; its is missing from the desk adobe

    Often when people think they've deleted an application, what's really happened is that they deleted its icon from the Dock. In the Finder, select
    Go ▹ Applications
    from the menu bar, or press the key combination shift-command-A to open the Applications folder. If the application is in that folder, drag it to the Dock (not to the Desktop or anywhere else.) The other Dock icons will move out of the way to make a place for it.

  • Why is the "Reset Firefox" button missing??

    I have several FF preferences and add-on preferences that will not stay after a restart. I set them, but after I quite and restart FF, the old settings are back. I dutifully followed the mozilla support-site instructions and tried all options to fix the issue:
    1) check for locked preferences--nope, not locked
    2) User.js overides -- no such file
    3) Reset Firefox to default -- not possible "reset" button is completely missing
    I've used the reset several times, now, which was quite disheartening. But, it is very suspicious that I cannot find the reset button at all, now.
    Someone seems to have asked this before, but the answer to just make a new profile was horrifying. Either this button is supposed to be there or it isn't. If it is supposed to be there, then this is an extremely serious security problem. Something is wrong and I must find out what. Why is this happening?

    You only see the reset button on the "Help > Troubleshooting Information" page if you use the profile that is marked as Default=1 in the profiles.ini file.<br />
    If you do not have the "Reset" button then either use the Profile Manager to create a new profile or use the Profile Manager to start with the current default profile to get the reset button in Firefox.
    *http://kb.mozillazine.org/Profile_Manager
    *https://support.mozilla.org/kb/Managing+profiles

  • Why is the "Send to iDVD" command missing from the share menu in iPhoto 9.4.3 when trying to send a slideshow to iDVD?

    How come the "Send to iDVD" command is missing from the share menu? In iPhoto I used to be able to send my slideshows to iDVD simply my clicking on the slideshow, selecting the "Share" menu at the top and going to "Send to iDVD". Now in iPhoto 9.4.3 that option is missing.
    Further i am also using iDVD 7.1.2 and running OSX version 10.8.3.
    Thanks!

    Export the slideshow via the Export button at the bottom of the slideshow window with Size = Medium or Large.
    Open iDVD, choose a theme and drag the exported movie file to the menu window being careful to avoid any drop zones.
    Follow this workflow to help ensure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • Hi, it looks like entire toolbar is hidden, I can bring it up by brushing the mouse on the right hand corner, but the Mozilla Firefox button is missing, so I have no access to my bookmarks.

    Can anyone explain what happened and how do I get the toolbar and the Mozilla button back?I don't remember doing anything different, the toolbar just disappeared. Nothing brings the toolbar permanently on screen and even when it's on screen the Mozilla button (tab?) is missing.

    Try:
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

  • Why was the "new tab" button option removed from the "customize toolbar" set?

    Back in 3.x and older I was able to place a "open new window" button, and an "open new tab" button on the bookmarks toolbar. This worked well for me. Now with 4, the "open new tab" is unavailable, and you can only open a new tab using the default button right next to your already open tabs.
    Any chance of that open new tab button coming back? I'd rather use that (what I am used to) than the new one.
    They're called options, stop removing them.

    You can find the New Tab button showing as a '+' on the Tab bar.<br />
    You can open the Customize window and drag the New Tab button from the Tab bar on another toolbar and it will become a regular toolbar button like the New Tab button that you have in Firefox 3 versions.<br />
    If you want the New Tab button at the far right end of the Tab bar then place a flexible to the left of it.<br />
    Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"

  • HT4623 The 'software update' tab is missing from the General menu. How do I get it reinstalled?

    Software Update tab is missing from General settings. How do I fix this.  I NEED TO LOAD NEW new a new iOS

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • The labview probe button is missing in the diagram view?

    any ideas why the labview probe & is missing i the diagram view of one Vi?  
    Solved!
    Go to Solution.
    Attachments:
    MissingButtons.JPG ‏17 KB

    You have it switched off in the VI properities. Probably disabled debugging.

  • My Apple TV is not showing any of my rentals. The rentals category is completely missing from the menu.

    My Apple TV is not showing any of my rentals at all. Even the category is missing completely. I have reset several times yo no avail! Anyone know what to do?

    Welcome to the Apple community.
    A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
    Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
    You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
    Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.

Maybe you are looking for

  • Does the Report Generation Toolkit need Office?

    Quick question: Does the Report Generation Toolkit (V1.1.3 for LV 8.6) need Microsoft Office installed in order to create Word documents? I have a need to create reports, preferably in Word format, but the target machine may only have the Word reader

  • Replacement for iMovie HD - or much simpler iMovie 11 interface

    Replacement for iMovie HD - or much simpler iMovie 11 interface I have just upgraded from a tape DV to a HDD HD camcorder. This has meant leaving behind my cherished i-Movie HD programme and using i-Movie11 (also moved to lion). I just want to do sim

  • How can I copy iCloud calendar and contact back to Outlook personal folder?

    After I install iCloud control panel for Windows 7 and turn on, it copied everything calendar and contact into iCloud and delete everything from Outlook Personal Folder.   I DONT WANT THIS!!!     How can I copy iCloud calendar and contact back to Out

  • Connect to my 10.6 mail server from an android tablet

    I have an Samsumg Galaxy Tab 2 7.0 (Android 4.0.1) tablet and I need to set up my email for my business on it. I have it set up fine on my iPhone and iPad and desktop (Mac and Windows both), but when I try to set it up on my Android tablet it either

  • Adding audio to a Video CD slideshow using Toast

    I have been able to create a Video CD slideshow using Toast Titanium 7.0. Has anyone successfully been able to add audio to a VCD slideshow? If so exactly how did you do it. The Toast help files were no help. They instructed me to use the application