The resource name is already in use. You must select a unique name for the resource.

I am using Project Server 2010 PWA.
I have created resource of type 'Work' in Resource Center. Server Settings -> Resource Center. Click
New Resource. I already assigned few task to these Resources.
Now I want these Resources can login into PWA site. I tried to add New User from Server
Settings -> Manage user. But I am unable to do so as I am getting the
error message: The
resource could not be saved due to the following reasons:The resource account is already in use. (unchecked "User
can be assigned as a resource" checkbox doesn't solve)
I am using forms-based
authentication. From Resource Center I tried Edit
Resource but we does not have any option there to give Windows User Account.
I do not want to delete the resource and re-create. Is there any way by which I can give
Windows User Account to my existing resources?

Hi,
You should edit fhe existing resource from the resource center, check the option "the resource can connect to Project Server" and set a valid user account.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Similar Messages

The local device name is already in use - Mapped Drive

I am having an issue with users losing their mapped drives to a Server 2012 box when they come into work the next day. The error message is "The local device name is already in use".
Autodisconnect has been disabled on both the server and workstations as per Microsoft KB articles, and the only way to correct the issue is a re-boot of the workstation.
I doubt it is the workstations that are the issue as drives mapped to Server 2008r2 do not experience this issue.
Any assistance would be greatly appreciated.

Hi,
>>I am having an issue with users losing their mapped drives to a Server 2012 box when they come into work the next day. The error message is "The local device name is already in use".
To tackle the issue, we can try to remove the existing network mapping, and then create a new network mapping for the share.
In addition, although the following KB applies to Window XP, it focuses on the similar issue and can be referred to as reference.
You may receive the "The local device name is already in use" error message when you try to restore a network mapping connection to a shared network folder on a Windows XP-based client
http://support.microsoft.com/kb/890413
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

My husband has an iPad and I just got one for me. We both have the same e-mail address. The message I get when I try to set my new one up is that the Apple ID is already in use. How do I set up with our shared e-mail account

My husband has an iPad and I just got one for me. We both have the same e-mail address. The message I get when I try to initiate setup is that the Apple ID is already in use. Any ideas on how to complete the setup of the new iPad since we both share the e-mail account?

If you selected open a new Apple ID account, go back a step and enter use existing Apple ID.
You will have to set up a separate iCloud account or your iPads will mirror each other.

I have a new ipod and when I sign in to Words with Friends it says that user name is already in use. How can I continue using the same user name with a different ipod?

I have a new ipod and added all my apps to it. When I sign in to Words with Friends it says that "user name is already in use" because it is linked to my old ipod. How can I use the same user name with my new ipod?

Was the iPod setup via iTunes on this computer?
Setup via wifi?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method

System Center Virtual Machine Manager SC VMM 2012 SP1 Installation fails: Unable to assign the name NO_PARAM to this host because this name is already in use.

I'm trying to install VMM 2012 SP1 on a Windows Server 2012 machine and it fails with this error,
the scenario is as follows,
Old database (from 2012 RTM) exists on remote SQL 2012 SP1 server
Server was 2008 R2 SP1 so I decided to make a fresh installation of 2012 with the same name
installed ADK
specific error: 01:42:13:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.VirtualManager.Setup.Exceptions.BackEndErrorException, Exception.Message: Unable to assign the name NO_PARAM to this host because this name is already in
use.
please help

I had a similar problem today when upgrading from SCVMM 2012 RTM to SCVMM 2012 SP1 RTM. To re-create the issue you describe originally you can actually just uninstall SCVMM 2012 SP1 RTM with "retain data" option and re-install the software on the same
computer (with the same name of course), attaching it to the retained DB. If you change the SCVMM server name I believe it will make some things go wrong after your install, like missing VM template passwords for example as the data gets encrypted in
the DB. Maybe it didn't but I didn't risk it. I definitely know if you change service accounts on a scenario like this you will be without the encrypted DB data which isn't much fun. To avoid changing the computer name, if you look in the setup log
files in %systemdrive%\ProgramData\VMMLogs\, specifically the SetupWizard.log file. You will see details on it failing because the same computer name is in the DB table "dbo.tbl_ADHC_AgentServer" and until it is removed from that table I wasn't able to get
the install to complete at all. The error in my logs looked something like this "InnerException.Type: System.Data.SqlClient.SqlException, InnerException.Message: Violation of UNIQUE KEY constraint 'unique_ADHC_AgentServer_ComputerName'. Cannot insert duplicate
key in object 'dbo.tbl_ADHC_AgentServer'. The duplicate key value is (computername.is.writtenhere). The statement has been terminated." In the row data in the DB it also seems to suggest that the computer name had "Virtual Machine Manager Library Files" on
it which is strange since I always remove the local SCVMM server as a library server after I install it and use an off box library server.

Microsoft Windows Network: The local device name is already in use.

I posted in : http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/disconnected-network-drive-error-as-follows-an/9a877c38-5e86-4c34-84c2-427a965577c6?page=2
Error:
"An error occurred while reconnecting drive letter to \\network server\share folder.
Microsoft Windows Network: The local device name is already in use.
This connection has not been restored."
1) A workstation is running Windows 7
2) The user has a drive letter mapped to a UNC
3) The connection is interrupted at some point and then restored
4) Upon attempting to access the mapped network drive, the user gets the error about the letter being
already in use.
Extremely disappointed that some of the posts marked as answers were obviously not, shows how poor the moderators here are.
My latest results clearly point to a Windows 7 client problem:
I received the error.
Had run nslookup so had a prompt open.
ran dir z:    worked. went to Windows Explorer, same error.
ran dir z:\sharename    worked. went to Windows Explorer, same error.
copy con z: test.txt then type test.txt; could create and retrieve file. Went and clicked on mapped drive in Windows explorer and received same error.
Obviously(?) not a Server or Networking problem. Ran Malwarebytes from bootable CD (client doesn't believe in AV). Didn't happen with USB flash drive.
Any other ideas?
I already have tried:
support.microsoft.com/kb/317021
http://support.microsoft.com/kb/303339
ftp://ftp.microsoft.com/misc1/BUSSYS/WINNT/KB/Q194/8/29.TXT
http://support.microsoft.com/kb/273151 Exchange issue
http://support.microsoft.com/kb/2663418   hotfix for win7
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/78276f1d-f7f9-416b-b903-
b9a18ecba67b/
http://support.microsoft.com/kb/297684
Ran MicrosoftFixit50494.msi
net use z: \\SERVER\ShareFiles /persistent:yes
http://support.microsoft.com/kb/2663418
http://support.microsoft.com/kb/297684#LetMeFixItMyselfAlways
http://support.microsoft.com/gp/gp_fixit_windows/en-us
http://support.microsoft.com/mats/windows_battery_power_settings
http://support.microsoft.com/kb/979470/en-us ???
http://support.microsoft.com/kb/947235/en-us
http://msdn.microsoft.com/en-us/library/cc232765.aspx
http://support.microsoft.com/kb/942817
Q939820? server 2003 sp3 Fix226580 341940_ENU_i386_zip.exe
http://support.microsoft.com/kb/983620
http://support.microsoft.com/kb/297684
net config server /autodisconnect:-1
KB Article Number(s): 2663418 Hotfix
http://support.microsoft.com/kb/983620
http://answers.microsoft.com/en-us/feed/t/9a877c38-5e86-4c34-84c2-427a965577c6
http://answers.microsoft.com/en-us/feed/t/9a877c38-5e86-4c34-84c2-427a965577c6
net use z: \\SERVER\1_CADFiles /persistent:yes SBS2011 Server with current service packs
Win7 Pro users with current Windows Update status
http://support.microsoft.com/kb/2663418
http://support.microsoft.com/kb/297684#LetMeFixItMyselfAlways
http://support.microsoft.com/gp/gp_fixit_windows/en-us
http://support.microsoft.com/mats/windows_battery_power_settings
http://support.microsoft.com/kb/979470/en-us ???
http://support.microsoft.com/kb/947235/en-us
http://msdn.microsoft.com/en-us/library/cc232765.aspx
http://support.microsoft.com/kb/942817
netsh winsock reset catalog
netsh int ip reset reset.log
Q811259
Q299357
Q937624
secpol.msc >> Lanman authentication level "send LM and NTLM"
net config server /autodisconnect:-1
changed server video to "standard vga"
disabled power save for NIC
Cannot disable Intell Raid software
http://technet.microsoft.com/en-us/library/cc780360%28v=WS.10%29.aspx   restart
http://technet.microsoft.com/en-us/library/bb726989.aspx browse list
Q138365
net config server /autodisconnect:-1
two additional registry keys are added:
anndelta: REG_DWORD: 0xbb8
announce: REG_DWORD: 0xf0
netsh winsock reset
netsh interface ipv4 reset
netsh interface ipv6 reset
ipconfig /flushdns
shutdown /r
sfc /scannow
http://support.microsoft.com/kb/929833
http://social.answers.microsoft.com/Forums/en-US/w7network/thread/306dd446-7630-4d5b-8aa0-
40fb839b293a    dns issue
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/i-have-this-problem-on-three-
win7-x64-systems-two/d44ed544-65f5-43a7-9e17-d2d10085c765?page=2
Leftover Homegroup components or Firewall?
disable DNS Client = dnscache
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/service-control-manager-reports-
that-a-timeout/e2e76ae5-ed09-4685-af86-5f8c2cd120bf     Norton Internet Security uninstall issues
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/windows-7-no-dns-or-no-network
-after-resume-wake/c1253ab0-4793-449e-8975-a900ce7dec4f
NSLOOKUP
KB Article Number(s): 983620 Hotfix

This is usually because the drive letter assigned to the network share is taken by something else. Maybe, by a removable drive.
Moderators and other answerers do their best to help specific cases, but everyone has their own situation. Apply common sense to the replies you find in the forums.
When you typed dir z: - is Z: the drive letter you wanted for this share, or it was automatically assigned?
-- pa
Alternatively you could try using common sense when you post, as well as taking the time to read the entire issue post so that you can avoid showing both your ignorance and arrogance (arrogance without any competency to back it I might add).
Suggesting that it might be "another drive" that took over the mapping shows your lack of reading comprehension and is unhelpful.   Please take the time to, once again, read first.
Lastly moderators here generally show little technical skill beyond entering search words into a knowledge-base of articles and then applying the results incorrectly further exacerbating the situation for the customer.

The specified name is already in use,

Hi,
Am deploying SPD reusable workflow. Am getting below error.
The specified name is already in use. The document or folder name was not changed. To change the name to a different value, close this dialog and edit the properties of the document or folder.
I have deleted all the existing file/folder in SPD under All files
à workflow related to my workflow. After deploying deploying my workflow and activating the feature am getting same error message and all the folder are coming back to All files
à workflow .
Any idea on solution ?
Thanks,
Prashanth J

there are some OutBox list/libraries being created when you activate publishing features, make sure those names not being used: check this post for more detail..
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f7e93d26-c2a1-42c2-b191-dc48f734684b/the-specified-name-is-already-in-use-error?forum=sharepointgenerallegacy
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

The Specified name is already in use while activating Publishing feature at site collection level in Moss2007

Hi,
Please suggest on this "The Specified name is already in use while activating Publishing feature at site collection level in Moss2007"
The specified name is already in use.
A list, survey, discussion board, or document library cannot have the same name as another list, survey, discussion board, or document library in this Web site. Use your browser's Back button, and type a new name. at Microsoft.SharePoint.Library.SPRequestInternalClass.CreateList(String
bstrWebUrl, String bstrTitle, String bstrDescription, String bstrListUrl, String bstrFeatureId, Int32 lTemplateID, String bstrDocTemplateType, ListQuickLaunchOptions qlOpt)
at Microsoft.SharePoint.Library.SPRequest.CreateList(String bstrWebUrl, String bstrTitle, String bstrDescription, String bstrListUrl, String bstrFeatureId, Int32 lTemplateID, String bstrDocTemplateType, ListQuickLaunchOptions qlOpt)

there are some OutBox list/libraries being created when you activate publishing features, make sure those names not being used: check this post for more detail..
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f7e93d26-c2a1-42c2-b191-dc48f734684b/the-specified-name-is-already-in-use-error?forum=sharepointgenerallegacy
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

An error occurred while reconnecting...The local device name is already in use. The connection has not been restored.

Hi,
So I have 2 PC's and I sign with the same credentials. I have a hard drive which I decided to share. In the setting I created permissions for the user credentials of both vcomputers and have full control access.
Basically, everytime I open my laptop after and it wakes up and try to connect to the network drive, I get the error
An error occurred while reconnecting...The local device name is already in use. The connection has not been restored.
I need to stay disconnecting all drives and reconnecting them. WHen I restart my PC the network drives restore perfectly. I don't understand why it doesnt work on wake.
Any ideas?

It seems that when a machine goes into sleep, the network connection is disconnected, naturally, but the machine still has the connection mapped. If you run the 'net use' you will see the connection. When you try to reconnect it, it sees the
connection and gives you the error.
I do not know if you can directly modify this behavior. However, as a work around, you could build a simple script like:
net use 'connection' /delete ( write it into a text file and save it has a .bat file.)
Use scheduled tasks to have the script run right before the machine goes into sleep. You can do so by setting the task to RUN ON Event: event 42 for the KERNEL_POWER source.
You can see http://superuser.com/questions/679195/run-a-script-when-hibernating-windows-8 for more info .

Presently using iMac: OS X 10.9.4 (13E28) 1. Open website; click drop-down and this appears: Before viewing PDF documents in this browser you must launch Adobe reader and accept the end-user license agreement, then quit and relaunch the browser. 2. Usi

Presently using iMac: OS X 10.9.4 (13E28)
1. Open website; click drop-down and this appears:
Before viewing PDF documents in this browser you must launch Adobe reader and accept the end-user license agreement, then quit and relaunch the browser.
2. Using an iMac, open founder and click downloads
3. Click AdbeRdr1013_en_US-1.dmg Apr. 4 2012, 7:11 AM 73 MB Disk Image Feb 27, 2013, 10:00 AM
4. Screen indicates it is opening Adobe reader X installer.package
5. Click this icon
6. Open Adobe installer; double-click install Adobe reader; putting password to access; click next; Note: Application is already installed; click finish.
Screen indicates: thank you and enjoy Adobe reader. Click Return to Prior Website. Click install now: total size 99.1 MB
Initializing arises with the following information: to proceed, open your download folder and locate the Adobe reader installer file, named Adobe reader installer [ XXX].dmg
It takes me back to steps that have already taken of locating down load file double-click to mount the disk image; double-click install Adobe reader; agreed by clicking open; entering name and password and clicking okay.
Did this several times with no success.
11. www.forums.adobe.com

Sorry if I failed to mention, I have done this as well.

HTTP Server : Socet name is already in use ?

Hi all,
I am using workflow server 2.6.4
While trying to start the instances workflow component container for work flow manager, it is showing the followin error
"HTTP Server : Socet name is already in use "
What might be reason?
Thanks in advance.
Thank you,
Regards,
Gowtham Sen.

I�m sorry. I just realized that this is not the right place for this post.
But if anyone has an answerer for it would be great.
H-i-J

Could not deploy an JAR archive because JNDI name is already in use.

Hi,
I have a problem.
When the WebLogic server starts, it cannot deploy an EJB application because a
JDNI name is already in use.
What can I do to unregister this name ?
If it is possible a better description is step by step.
The WebLogic server, when starts, prints the next lines:
<18/01/2002 12:35:24 PM GMT-06:00> <Error> <J2EE> <Error deploying EJB Component
: sui_ejb
weblogic.ejb20.EJBDeploymentException: Error deploying stateless EJB; nested exc
eption is:
javax.naming.NameAlreadyBoundException: Can't rebind anything but a repl
ica-aware stub to a name that is currently bound to a replica-aware stub; remain
ing name ''
javax.naming.NameAlreadyBoundException: Can't rebind anything but a replica-awar
e stub to a name that is currently bound to a replica-aware stub; remaining name
<<no stack trace available>>
>
<18/01/2002 12:35:24 PM GMT-06:00> <Error> <J2EE> <Error deploying application
s
ui_ejb: Could not deploy: 'sui_ejb.jar': JNDI name in use
>
<18/01/2002 12:35:26 PM GMT-06:00> <Notice> <WebLogicServer> <WebLogic Server
st
arted>
<18/01/2002 12:35:26 PM GMT-06:00> <Notice> <WebLogicServer> <ListenThread liste
ning on port 7001, ip address 157.253.174.63>
<18/01/2002 12:35:26 PM GMT-06:00> <Notice> <WebLogicServer> <SSLListenThread
li
stening on port 7002, ip address 157.253.174.63>
In advance, thanks for your help.
- Ricardo De la Rosa (Colombia)

Cameron,
I resolve the problem using your clues.
The problem was that I include the ejb.jar file in the .ear file and I copy the
ejb.jar file in the applications directory and it is redundant.
It is only needed to include the ejb.jar file in the .ear file.
Best regards,
- Ricardo (Colombia)
"Cameron Purdy" <[email protected]> wrote:
In that case, check the config.xml and make sure that the app isn't being
deployed in ways that you weren't expecting ... just double-check
everything. Sometimes the console does weird things.
Peace,
Cameron Purdy
Tangosol, Inc.
Clustering Weblogic? You're either using Coherence, or you should be!
Download a Tangosol Coherence eval today at http://www.tangosol.com/
"Ricardo De la Rosa" <[email protected]> wrote in message
news:[email protected]...
Cameron,
I think that it isn't the problem because yesterday it deploys correctly,and
today I didn't touch the compilation options.
Thank you !
If you have another idea I really appreciate it.
Best regards,
- Ricardo (Colombia)
"Cameron Purdy" <[email protected]> wrote:
Hi Ricardo,
Certain items are not replica-aware, such as JMS queues, so they must
be
deployed to a single target in the cluster. It sounds like your EJB
is
compiled with an option that turned off the replica aware stubs.
Peace,
Cameron Purdy
Tangosol, Inc.
Clustering Weblogic? You're either using Coherence, or you shouldbe!
Download a Tangosol Coherence eval today at http://www.tangosol.com/
"Ricardo De la Rosa" <[email protected]> wrote in message
news:[email protected]...
Hi,
I have a problem.
When the WebLogic server starts, it cannot deploy an EJB applicationbecause a
JDNI name is already in use.
What can I do to unregister this name ?
If it is possible a better description is step by step.
The WebLogic server, when starts, prints the next lines:
<18/01/2002 12:35:24 PM GMT-06:00> <Error> <J2EE> <Error deployingEJB
Component
: sui_ejb
weblogic.ejb20.EJBDeploymentException: Error deploying stateless
EJB;
nested exc
eption is:
javax.naming.NameAlreadyBoundException: Can't rebind anythingbut
a repl
ica-aware stub to a name that is currently bound to a replica-awarestub;
remain
ing name ''
javax.naming.NameAlreadyBoundException: Can't rebind anything but
a
replica-awar
e stub to a name that is currently bound to a replica-aware stub;remaining name
<<no stack trace available>>
>
<18/01/2002 12:35:24 PM GMT-06:00> <Error> <J2EE> <Error deployingapplication
s
ui_ejb: Could not deploy: 'sui_ejb.jar': JNDI name in use
>
<18/01/2002 12:35:26 PM GMT-06:00> <Notice> <WebLogicServer> <WebLogicServer
st
arted>
<18/01/2002 12:35:26 PM GMT-06:00> <Notice> <WebLogicServer>
<ListenThread
liste
ning on port 7001, ip address 157.253.174.63>
<18/01/2002 12:35:26 PM GMT-06:00> <Notice> <WebLogicServer><SSLListenThread
li
stening on port 7002, ip address 157.253.174.63>
In advance, thanks for your help.
- Ricardo De la Rosa (Colombia)

Getting error when submitting new Add-on - "This name is already in use. Please choose another."

Trying to submit a new add-on for my App. The name is "Springpad Clipper" and when uploading the file I get the error "This name is already in use. Please choose another."
We do currently have an add-on called "Springpad" but the name (both in the manifest file and the display name) are different.
Any help you could provide would be great, we're trying to upload this ASAP. Our developer account is under the name "Springpad"

The Addons .Mozilla .Org support forum is over here: <br ./>
https://forums.mozilla.org/addons/
We do support here for the Firefox web browser.

Setting Up SAP JVM in Eclipse IDE: JRE name is already in use

In documentation "Setting Up SAP JVM in Eclipse IDE" (https://help.hana.ondemand.com/help/frameset.htm?7613eaad711e1014839a8273b0e91070.html) a definition for a JRE must be added, although in step before that one a JRE has been created.
If one tries to really add another definition and chooses the directory C:\...\sapjvm-7.1.018-windows-x64\sapjvm_7, then the message comes up: "The JRE name is already in use".
Was the wrong directory choosen, is this action really needed, what please has to be done at this point during Getting Started?

The directory is correct. However, if you have already started Eclipse with that JRE, it is automatically added to the list of Installed JREs. Hence the "name already in use" message when you try to add it again manually. In short, you can safely skip this step now.

Computers local host name is already in use

I keep getting a message that states "This Computers local hostname [my i-mac name] is already in use on this network.
The name has been changed to [my i-mac name-2].
This happens a lot and I am now up to [my-imac name-88]
Do I have the settings wrong? Can anyone help me so that this doesnt continue.
I am not sure if someone is trying to gain access to my mac or not?
Thanks

Sometimes this message means that you have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. Disconnect the Ethernet cable or turn off Wi-Fi.
Sometimes it happens because a device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
Rename the computer in the Sharing preference pane.

The resource name is already in use. You must select a unique name for the resource.

Similar Messages

Maybe you are looking for