The restoring session stopped at the middle of the process.

I have a problem when I'm trying to restore my iPhone. When I'm in the middle of the process it just stops and it tells me that the error code is 1015. What can I do?

iOS: Resolving update and restore alert messages including 1015.
"Error 1015: This error is caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred."

Similar Messages

  • The restore session has stopped working. It tries to load, but then gives an error message that the script is not working and will not actually show the previous tabs I had open.

    I count on using the Firefox restore session feature. But it's stopped working. For the past couple of days, it hasn't worked a single time. (I haven't changed anything on my PC.) It just suddenly stopped working.
    Now it gives me an error message that the script has stopped working. It gives me a couple of options. I'm not sure of the exact wording, but one option is to stop the script and the other is to keep trying. But the keep trying never works.
    I have to stop the script, hence, the list with my previous tabs never comes up.

    Which file is mentioned as the cause of that script error?<br />
    Is that a file with a chrome protocol?

  • When the first version of the Restore Session tab was implemented in an update for Firefox?

    ''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/806369]''
    Essentially, I'm trying to find out how many sessions I can restore since, after the creation of this feature, I typically allowed the "Restore Session" Tab to remain in the window, allowing me to at least access the last few sessions later on when I'm much less busy. Unfortunately, I let it get a bit out of hand. Is there any way for me to find out how many sessions I have saved in this way by searching through files or folders affiliated with this browser? Even if the history clears about every 290 something days, are these sessions and the information they require stored in such a way that the clearing of history would not create a problem if I want to restore very old sessions that were left in this manner? (I recently changed it to allow all of my history to be saved, rather than just limiting the number of days, but I fear I might have taken this action too late. And I'm going to download a "Session Manager" add-on, to help me with this in the future, but, I'm still worried about these past sessions.) Any help or information would be appreciated. Thank you for your time.

    You can only manage multiple sessions with an extension like Session Manager (extends the build-in session restore) or Tab Mix Plus (has its own implementation of session restore, so can be less reliable if Firefox doesn't close properly). The basic build-in Firefox session restore only handles the previous session. Firefox 4 has a button on the about:home page and a menu entry (History > Restore Previous Session), but Firefox 3 doesn't have that feature. Session Restore stores a list of currently open tabs, so the amount of history that you keep shouldn't matter.
    * http://kb.mozillazine.org/Session_Restore

  • While I was restoring the ipod touch the battery on the computer died. Ipod was in the middle odf the process, now It's not recognized at all.

    I was restoring my ipod on Itunes to a factory settings, in the middle of the process the battery on my PC died. When I pluggled it back on the power, the ipod touch is not recognized on the Itunes.

    Take a look at this, and try this: http://www.iclarified.com/entry/index.php?enid=1034

  • When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle, after it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"

    When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle.
    After it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"

    Hi bahaluly,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are not able to update the iPhone. I would recommend that you read this article, it may be able to help the issue.
    Get help with iOS update and restore errors - Apple Support
    Solve network errors
    Related errors: 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200, or "There was a problem downloading the software," or "The device isn't eligible for the requested build." These alerts mean that your computer is either having difficulty contacting the Apple update server or communicating with your device. 
    Check your computer for software or settings that might cause communication issues between your computer and Apple or between your computer and your device.
    Cheers,
    Mario

  • Can anyone explain to how to get rid off restore session on the mozilla firefox it keeps coming up every time i click on mozilla firefox it comes up restore session why is this it is driving me nuts

    can anyone explain to me how to get rid off restore session on the mozilla firefox it keeps coming up every time i click on mozilla firefox it comes up restore session why is this i want to get rid of it it is driving me nuts

    What do you have checked in Firefox Preferences>General?
    Ciao.

  • I was trying to restore my iPhone 4(iOS 7.0.4) on my hp Laptop. But when i was restoring, it gets stuck in middle. then i tried again but same problem. always stuck at the same point. plz help me.

    i was trying to restore my iPhone 4(iOS 7.0.4) on my hp laptop. but when i was restoring, it gets stuck in middle.then it keep showing recovery mode screen and i tried again to restore but same problem. Always stuck at the same point. plz help me.

    Hi Varinder Ghuman,
    Thanks for using Apple Support Communities.  If you're unable to restore your iPhone, this article may help:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Cheers,
    - Ari

  • Hello, i have a first generation ipod and i lost the pin, i followed the instruction to back up and restore factory settings but in the middle of the process an unknown error occurred

    hello, i have a first generation ipod and i lost the pin, i followed the instruction to back up and restore factory settings but in the middle of the process an unknown error occurred. how can i get my ipod working again with my backup files. please help

    What was the complete wording of the error message? Usually an error number is also given.
    Maybe:
    ERROR (1)
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - Try another cable           
    - Also, confirm your security software and settings are allowing communication between your device and update servers.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar     

  • I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.

    I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.

    Put your phone in DFU mode,
    Hold the Power Button (3 secs)
    Continue holding the power button and also hold the home button (15 secs)
    Release the power button while continuing to hold the home button (10 secs)
    Your device should prompt with the "Connect to iTunes Screen"
    Restore.

  • HT201210 Pls i was trying to update my iphone 3G to software version 4.2 using itune. The process did not complete succesfully. I then decided to restore back my restore my prevoius version 4.1, it stopped with an error code1015. Pls i need help

    Pls i was trying to update my iphone 3G to software version 4.2 using itune. The process did not complete succesfully. I then decided to restore back my restore my prevoius version 4.1, it stopped with an error code1015. Pls i need help

    Go here: http://www.iclarified.com/entry/index.php?enid=750 and download iOS 4.2.1 for the iPhone 3G. Perform a restore, but hold down ALT when clicking restore. Restore from this file you just downloaded. You should not get 1015 as you are upgrading, but if you get a different error, report back.

  • How to Stop the process chain if it in the middle of the process?

    Hi,
    Is there anyway that i can stop the process chain if it is in the middle of the process already?
    Raj

    "Hi,
    First and foremost let me advice you to be very careful while doing this.
    You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
    The next step will be to go to targets that you were loading and remove the red requests from those targets.
    Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
    But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
    Different Ways to stop process chain
    1)SM37 -->Kill Job
    2)SM50/sm66- ->Kill process
    3)RSPC>Job Log>Make the process RED forecefully.
    4)RSPC>Process chain> main Menu"Remove from Scheduling" OR
    5)se37-->RSPC_API_CHAIN_INTERRUPT
    give RFC BW system name(technical) and process chain name(technical)
    Steps 1 -3 stops the chain running in process
    Steps 4-5 stops the chain AFTER the current job which is running is completed as sucessful or Failure by nature.
    Rationale - 4-5
    This function will only remove the jobs from schedule, which did not yet run. It will not kill running jobs, as this may leave the system in an inconsistent state, moreover killing processes is possible for synchronous processes only anyhow. This means, that there will be no errors with interrupted chains, which on the other
    hand means an interrupted chain is not restartable. So for a running chain this function is intended to be an emergency break only. You can use it, however, to remove a scheduled chain from schedule, such that it does not start except by your product.
    Re: Kill a Job
    Re: Killing a process chain.
    How to stop a process in a process chain?
    Regards,
    JituK

  • Can we stop the process chain in middle of the process ?

    hi experts,
        Can we stop the process chain in middle of the process after scheduled.
        my process chain is like  start--->load>psa>ods1-->further updates--->ods2. In this case I have already scheduled but i want to stop the process how can i. After rectifying the error I want to restart again.
    if it is possible what are the steps we fallow pl give me step by step procedure.
    thanks & regards.
    venkat

    stopping the process chain is pretty simple. you just need to kill the jobs associated to them as mentioned by other folks.
    for restarting, have a look at this blog.
    Restarting Processchains
    there he explains how to restart a stopped process chain.
    Raghav

  • FFresFF crashing and restore session has been crashing without warning or notice for the past two weeks every other day, losing my restore session open windows

    several times in the past 2 weeks, i come back to my computer to find FF has closed. there are no alerts or notices of a crash. when i use restore session, only 3 windows are listed as "recently closed", when I have 20 or so open. i believe there have been 2 updates in that period. i have to manually go through 'all history" to find my missing windows!

    every time I have a problem with FF recently, someone suggests this. I try it and learn nothing.

  • I have stopped upgrade IOS5 in the middle of the process by accident, now couldnt detect my iphone/ ipad

    i have stopped upgrade IOS5 in the middle of the process by accident, now couldnt detect my iphone/ ipad & cannot upgrade again

    Hi MrsMoosie,
    I'm sorry to hear you are having these issues with your iPad. If your iPad isn't responding or doesn't appear to be charging, you may find the information and troubleshooting steps outlined in the following articles helpful, in particular the following portion:
    If you don't see the charging screen within an hour, or you see the connect to power screen, check your connector, USB cable, and power adapter. Make sure that everything is plugged in firmly, free of debris, and not damaged. You might want to try a different USB cable or power adapter.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
    Regards,
    - Brenden

  • Firefox just updated to 5.0.1 when it opens it opens two tabs, one a restore session tab and the other Firefox home tab. Nothing appears in the restore tab and everything freezes. Only way to get out is to ctrl, alt, del.

    After updating to Firefox 5.0.1 and trying to open Firefox, it opens two tabs. One is the restore session tab and the other is the Firefox home tab. Nothing opens in the session restore tab and once the Firefox home tab loads the browser screen freezes with no crash ID's listed. The only way to get out is thru the task manager and ending the process. Firefox worked fine before updating.

    Hi glivezey,
    Try typing ''about:home'' into the address bar. Is that the page you are looking for? If so, go to ''Tools > Options > General'' and save it as your homepage. If that home page doesn't show up the next time you start Firefox, you should look at [[Preferences are not saved]].
    Hopefully this helps!

Maybe you are looking for