The right chanel in the audio jack is not working in my iphone4.

Does anyone have an idea what can it be?

yeep, tryed that already.and the headphons are fine.don't know what the **** can it be..

Similar Messages

Front panel audio jack is not working on K9N Neo V2

My front panel audio jack is not working on K9N Neo V2. I check the JAUD1 cable and it appears to be connected to the front panel audio jack. My soundcard driver cannot detect any gadgets when I plug it in the front panel. My audio drivers and BIOS are up to date. Is there any known solution to this? My computer is only a few months old and I have not tried the front audio jack until recently. I'm on Vista home premium btw.
Also, I've got another problem, my processor is AMD 64x2 4400+ overclocked to 2.63Ghz. I've been using that clock value ever since I built this computer and stress tested the processor and found that it would not cause any problems like hanging or overheating. However, I recently decided the need for AMD's Cool & Quiet technology and enabled it. It caused BSODs every few days or per week that didn't happen before. I tried it with the default clock value and it still causes BSODs. Can someone help me?

Quote
Thanks. Its ironic that disabling it actually enables it.
It has to day with the front panel audio wiring of your case. How many wires are there that can be connected to the board's pin header?
Quote
Sound quality isn't very good
Can you be more descriptive? Is the quality better if you plug the headphone into one of the jack at the back panel? (Also, make sure you tell the Realtek HD Audio Manager, that a headphone is connected (and not regular speakers).

Speaker and audio jack is not working

My laptop speaker and headphone jack is not working.So am not able listen anything on laptop.Please give me a solution on it.

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion g series Notebook and issues with the sound. Here is a link to help troubleshoot issues with the sound. Please note remove any and all USB devices. Disconnect all non-essential devices and headphones, as these could cause some issues. Here is an automated tool for troubleshooting Windows 7. It has a built in Audio repair built into it. I hope this helps with the sound. Thanks.

Microphone speaker and audio jack is not working?

hi i buy a I phone 5 S in march from E max UAE . Its been 3 month only but my phone audio jackpot is not working ,microphone and speaker is not working moreover if i open some app for longer time and during charging it get hot. I took the phone to the store tell them the problem and the phone is in warranty also but they didn't change the device they say we cant change and just repair the device. its been two days my phone is back again i am facing the same problem .can anybody suggest me where should i go for complain and what i will do to change the device.

I've asked the hosts to relocate your post to the iPhone forum -> Using iPhone - this is the MacBook Pro forum.
Good luck,
Clinton

Some buttons on the right hand screen of my ipod are not working please help me!! what do i do, some buttons on the right hand screen of my ipod are not working please help me!! what do i do

some buttons on the right hand of my ipod touch screen are not working? could somebody help me i have reset restored and everything has this happened to anyone else?

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Audio jack port not working

i installed windows 8.1 on my laptop HP 655 and i have high definition audio device drivers installed but i cant hear any sound from my headphone or external speakers when i plug the audio jack in its port. but the internal speakers are working well... please help

Dear gbonyo -
I understand that after installing Windows 8.1, your speakers and headphones do not work. Well, that's annoying... I will try to help.
- Before going through these steps, make sure that the speakers and headphones are connected to the correct ports. (I know this sounds silly, but sometimes it happens.)
The first and simplest thing to try is the audio playback troubleshooting tool:
1. With the headphones and speaker plugged in to the laptop, type "troubleshooting" at the Start screen to open the Search charm, and then select Troubleshooting from the search results.
2. Under Hardware and Sound, click Troubleshoot audio playback and then click Next when the Playing Audio window opens.
3. A new window opens. Select the device you would like to troubleshoot. Then click Next and follow the on-screen instructions.
4. If a recommended action displays, select Apply this fix or Skip this step to continue to search for other problems.
If the above does not resolve the problem (and/or it does not find your speakers/headphones) it could be that the laptop does not know that it has speakers/headphones attached to it.
1. From the Start screen, type "sound" to open the Search charm, and then select sound from the search results.
2. Click on the Playback tab.
3. Right-click an empty area of the Sound window.
4. Click the check boxes to select Show Disabled Devices and Show Disconnected Devices.
If the device is listed as "Currently unavailable" or "Not plugged in," disconnect it, and
then reconnect it from the port.
5. Test the device by sending a signal from the sound source (For example: Play an mp3 file).
6. Look at the bars next to the device name on the Playback tab:
If the gray bars next to the line-in audio device name change to green, the device is active and an audio signal is passing through the line-in port. The issue should now be resolved.
If the bars remain gray and inactive, the computer is not recognizing a signal. Leave the Playback tab open and proceed to the next step.
7. From the Playback tab of the sound window click the port that you want to use (there could be one or more ports).
8. If the device you want to use contains a small circle with an arrow pointing down, the device is disabled. To enable the device, right-click the device name and select Enable.
9. Click Set Default to make this device the default line-in audio device.
10. Click OK to make the changes.
Please let me know if this resolves the problem. If it doesn't, we can try a couple of other things.
Sincerely,
dhtp
DH
I work on behalf of HP.
Please click "KUDOS Thumbs Up" if I have helped you, and click "Accept as Solution" if your problem is solved. Thanks for the feedback!

Audio jack does not work after 10.9.1 update

Hi folks --
I have had an issue for a while now that maybe some of you have seen.
I have a 2011 iMac 27, and upgraded to Mavericks months ago, no issues. For the holidays I bought an AppeTV 3rd gen for the wife, and after setting it up on the network, I can no longer play audio throught the audio out jack on the iMac to powered speakers.
Now, the issue is, I cannot tell if it stopped working before the AppleTV got added to the mix, or after a Mavericks update. It has been about 3 months...
The machine is out of warranty, and I have the sneaking suspicion that the audio jack on the motherboard is to blame... but not certian. Has anybody had that issue or seen it be an issue? I consider myself pretty up to date on the Mac support sites like Macintouch and iFixtit, but have not seen anything regrading this issue on this model.
I have done a deep clean with Onyx, zapped the PRAM, and done a few restarts. No joy.
Anyone have any wisdom to impart?
Thanks in advance
Michael

Raymond Rogoway wrote:
Used Software Update to update to 10.5.1. Now my install disk will not boot. Drive kicks out disk after awhile. Ran Disk Warrior which reported no changes. Repair permissions.
Ray
Does the disk also get ejected when you are running Leopard, or only when using it for booting?
Have you looked at it physically for scratches or that dirty film some DVDs had?

Audio jack is not working

I have bought a blackberry z10 4 days ago.When I test the headset on another phone it is working fine
But when I put it into my phone it doesn't respond.i have followed many ways
..pls guys any suggestions......I want my z10 to be perfect......pls help
Solved!
Go to Solution.

Well, your phone is still under warranty. I suggest you take it back and either have it fixed or have it replaced.

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

I've noticed that when wearing headphones the sound is much louder in the right headphone than the left one. This wasn't a problem before. Has anyone else noticed this? Is there a fix if so?

I've noticed that when wearing headphones the sound is much louder in the right headphone than the left one. This wasn't a problem before. Has anyone else noticed this? Is there a fix if so?

Did you try different headphones!?
If it's sounding the same thing on different headphones then you might have changed the Left-Right balance
Have a look at Settings -> General -> Accessibility
There's a slider for L-R
If it's in the center then the headphone through which you're facing the problem might be damaged, try twisting the headphone wire of the speaker of the headphone (left or right) where you are encountering less volume.
If it's sounding altogether same on all the circumstances, the headphone jack might be damaged. Get your phone to the Apple Store and book an appointment
Try these steps and it will solve your question

The second Earphone jack will not work. My DV6000 is only one month old.

The second Earphone jack will not work, but I get static when I plug my earphones into it. The other jack works ok. I need help in fixing it. My DV6000 is only one month old.
This question was solved.
View Solution.

HI,
Robert96 wrote:
The second Earphone jack will not work, but I get static when I plug my earphones into it. The other jack works ok. I need help in fixing it. My DV6000 is only one month old.
One of the jacks is for audio in and the other is for audio out. Some select versions have an S/PD/F jack. Chances are the reason you are getting static is that if you plug an earphone into a microphone jack it will attempt to behave as a microphone. It will not operate properly.
So..a recap. There is only one earphone jack
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I own an iPod Classic. In iTunes, some podcast videos cant be played on teh iPod, so I set it to convert the video to the right format for the iPod. It used to work perfectly, but now for some reason, it doesnt convert properly! When I play the video,

I own an iPod Classic. In iTunes, some podcast videos cant be played on teh iPod, so I set it to convert the video to the right format for the iPod. It used to work perfectly, but now for some reason, it doesnt convert properly! When I play the video, it is just a white screen, but the sound can be heard. Can anyone help??????

Your source video file is probably muxed.
Neither QT Pro or iTunes has the ability to successfully encode a muxed video file with audio. You'll end up with video and no audio.
See: iPod plays video but not audio of some exported files.
You'll need to use some other third-party software to do the conversion. There's a handful of software available. Just search the forums and you'll find many titles mentioned.
Try MPEG Streamclip.

Is Keynote the right application for the job?

I have a job that requires integrating an audio soundtrack with some slides. The difference between this presentation and a normal slide presentation is that most of the information is in the soundtrack (it's a lecture, with some slides as visual aids). The amount of time in which the slides need to appear is relatively brief; in fact it's a fraction of the soundtrack's run-time.
I have time index information that specifies where the slides should appear in the presentation. For example, there will be two minutes of soundtrack with a blue background, and then a slide will appear for 5 minutes while the soundtrack discusses its content. Then the slide should disappear into blue background for 10 minutes, then another slide for 3 minutes, then background for 20 minutes, then another slide...and so on.
In other words, the soundtrack must play continuously, interspersed with occasional slides at specific times for specific durations, with blue background in between. I want to export the entire presentation as an integrated audio+video file and burn it to DVD. I already have the soundtrack as an .aiff file in Logic Pro 7.2, and I will have the slides as high-quality JPEG files. I don't own a Keynote license. I do have a QuickTime Pro license. I've played with this in Microsoft PowerPoint enough to determine that it's not the right tool for the job.
I've looked at Keynote's Help documentation, and it's not immediately apparent how to start with an audio soundtrack and simply insert slides at specific times, for specific durations. Can I accomplish that in Keynote, or is there another application that would be better suited to the task?
Thanks in advance for any help anyone can offer.

Brian:
If I correctly understand the effect you've described, I imagine that would be VERY annoying. However, in the test presentation I made in iMovie, that's not exactly what I experienced. I added the soundtrack first, and then I placed the slide images where I wanted them. Initially, I did notice that I couldn't just jump ahead and place an image all the way at the end of the soundtrack file without iMovie adjoining it to the last image's segment on the timeline, but that was easy to fix. Once the image was in the timeline, I just dragged it all the way to the end of the soundtrack. After that, I could place images anywhere I wanted.

In previous versions of i Tunes you could highlight a song in your library and there would be a genious list on the right side of the screen showing songs like the one highlighted in the library. Now I do not get that list. Is there a way to get this back

In previous versions of i Tunes I could highlight a song in my library and a genious list would show on the right side of the screen listing songs that were like the one highlighted. Now I do not get that list. Is there a way to get that back?

Hi again Bob,
I believe I've found the feature you were speaking about now. Information on the "In the Store" feature of iTunes can be found here:
Apple - iTunes - Inside iTunes - Using In the Store from within your iTunes Library.
http://www.apple.com/itunes/inside-itunes/2013/01/using-in-the-store-from-within -your-itunes-library.html
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I would like to know it it's possible to change the scroll bar from the right part of the firefox browser, to the left part and, if it's possible, how can it be done. Thank you!

The scroll bar (the one used to scroll up and down any kind of website), that is normally in the right part of the firefox browser, would be of much help to me if it could sometimes be moved to the left part of the browser. Is this possible? How can it be done? Can anybody tell me the exact steps to take in order to do this (if it is possible of course)? This would be helpfull to me, since I think that the firefox scroll bar is overlaping the scroll part of the facebook chat sidebar, since I just can see a few people on this facebook chat sidebar and I can´t scroll along it, as I could a while ago. So my guess is that the firefox scroll bar is covering the other. In order to solve it in a simpler way, I guessed that if the firefox scroll bar could be moved to the left side of the browser, this problem could be solved. So, can anybody help me?

http://kb.mozillazine.org/layout.scrollbar.side
Type '''about:config''' in Location (address) bar
filter for '''layout.scrollbar.side'''
Right-click the Preference and Modify it to '''3'''
You may need to reload any pages open to have scrollbar move to left after Preference change.

The right chanel in the audio jack is not working in my iphone4.

Similar Messages

Maybe you are looking for