The Right PSU for my system

If i want to build a system having the following spec what size psu do you think i need ?? 500 W or 550 W or 600 W or ???
MSI P6N SLI Platinum
intel Q6600
EVo 120 akasa heatsink and fan
two grahic card dual core 8 pins
8 GB pc6400
sata 1 dvd RW drive, IDE 1 cd drive. one floppy, one hard drive sata2 10000 GB HDD,
No overclocking
Many thanks

You need to review your Spec in the Sig - most of it is "very unclear" to say the least. The "graphics cards" are completely anonymous.... for instance.
MSI P6N SLI Platinum
Q6600
MSI 256 graphic card ATI
2 GB crucal pc6400
psu 3200Watts
window xpsp2
1 dvd drive, 1 cd drive 1 10000 GB HDD, 1 flopy, two graphic card
Try this - it will give you a good idea of what you will need. Then you can make your own judgement.
http://extreme.outervision.com/psucalculatorlite.jsp

Similar Messages

What is the right process for moving system to another plant

Dear Guru,
I have below scenario which i would like to understand what should be the right process to deal with it..
Organization Structure.
Company code: C500
Business area : 500A
Plant A500 and S500 which is under the same company code and same Business area.
Storage location: SW01 and AW01 which are physically same location address
I have this scenario where the user have a PO under Plant S500 which already GR and IR and the physical goods is currently placed in Storage location SW01.
But the user realized the Material should be created under Plant A500.
For the above case, can anyone please advice me what should be the better process instead of reversal the IV/GR/PO? and what is the right process for MM and considering also from the finance point of view?
Thank you very much,
Regards,
CheeWee

Hi
It is the configuration issue. SOmetime it happens when you copy the Reference plant to your Plant.
Change the setting and make it both Qty & Value if you really want to manage the stock qty with value then proceed.
Valuation area is nothing but a Plant.
karthik
Edited by: Karthik on Jul 25, 2011 1:23 PM

When i plug my ipod shuffle 4th generation in a box pops up and says the right files for this ipod isnt on the system?? sooo i re downloaded itunes and it still doesnt work soo i deleted it all and eredownloaded itunes all up to date and it still doesnt !

when i plug my ipod shuffle 4th generation in a box pops up and says the right files for this ipod isnt on the system?? sooo i re downloaded itunes and it still doesnt work soo i deleted it all and eredownloaded itunes all up to date and it still doesnt ! any help please

What was the exact error message you received? When you removed and re-installed iTunes, did you use the precise instructions in this Apple support document to walk you through the process?
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
B-rock

I have moved all of my movies from "Search for - All Movies" folder thinking they were shortcuts to the trash folder by mistake. Is there any way I can restore them to the right place on my system Note most are on an external hard drive. :(

I have moved all of my movies from "Search for - All Movies" folder thinking they were shortcuts to the trash folder by mistake. Is there any way I can restore them to the right place on my system Note most are on an external hard drive.

You can drag them out of the trash folder to wherever you wish. There is no automatic way to restore them.
If you have a recent backup of your computer (at the risk of preaching, everyone should have one), restore them from there.
Barry
P.S. I have no clue what you did or why you have 44,000 on the external drive

Is this the right product for me?

Hi All
Just considering Contribute and was wondering if this is the right product for my needs.
I've built a web site and need to add a retrofit CMS type function to some pages.
There's news, products and general page editing.
I can see News being straightforwards in Ct but not sure about the rest. It appears that an editor requires Ct whether they want to edit in a browser or not. Is this the case? Sort of defeats the purpose for browser editing doesn't it?
Any comments are much appreciated.
Thanks

ARD will not allow you print from your home system to your printers at work either. You could transfer the documents from your home system to your work system and then print, but you don't need ARD for that. File sharing, for transferring the documents, and the Screen Sharing built into Mac OS X 10.5 and 10.6 to take control of the work computer, would be all you need and wouldn't cost you anything additional.
If, however, you need the ability to "curtain" the screen at work, then you would need ARD. Another, somewhat less expensive, option would be Timbuktu.
Regards.

What is the right update for Lion OS X 10.7.5 ?Is it Lion OS X Mavericks or Lion OS X 10.8 and above?

I bought a Macbook Air 11" in 2011. It is currently running Lion OS X 10.7.5. What is the right update for this ?Is it Lion OS X Mavericks or Lion OS X 10.8 and above?

10.7.5 is the latest version of Lion. The next operating system that was released by Apple was 10.8.x Mountain Lion. Apple have, in the last two weeks, released a newer version of OS X - 10.9 Mavericks.
It is a completely new operating system, not an update to Lion.
Mavericks is available as a free upgrade (as opposed to update) via the Mac App Store in the Apple menu, but before upgrading (if you choose to) ensure that any applications you rely on are compatible with the latest OS. Also, for Mavericks to run well 4gb of RAM is recommended.

I downloaded microsoft office to my MBP and my question is how do i get the right file or operating system to open it and so that i can use it?

i downloaded microsoft office to my MBP and my question is how do i get the right file or operating system to open it and so that i can use it?

Welcome to the Apple Support Communities
There are two Office versions: Office for Windows, and Office for Mac.
I suspect that you have downloaded Office for Windows, and you can use it if you install Windows, but a cheaper and easiest way to use Office is to use Office for Mac, so you won't have to install Windows. See > http://www.microsoft.com/mac

SUBINACL - the right tool for the job?

Here is the scenario:
DomainA and DomainB
Full Trust both ways
Windows File Share in DomainA. Created a windows server in DomainB. Used Quest Migration Manager to migrate users and groups from DomainA to DomianB, keeping SID history. Xcopied files from DomainA server to DomainB server, keeping the permissions from DomainA.
Now, the Trust will be broken and we need to change the permissions from [email protected] to [email protected] Thousands of shares and permissions, so can't do manually. So far I have tried SUBINACL in the following context:
Subinacl /noverbose /output=e:\ntfs_perms.txt /subdirectories e:\Share
and then
Subinacl /playfile e:\ntfs_perms.txt
This changed some of the permissions to DomainB, but removed a lot of permissions.
Is this the right tool to use for this? Is this the right syntax for this scenario?
Thanks!
Mike

Hi,
Sorry for the delay reply.
It seems like you have enabled the SID history.
Based on my experience, after we completing the migration, sIDHistory should be removed from migrated principals to minimize management complexity. Microsoft has provided a sample script and
Powershell command to remove SIDHistory.
So, please first confirm if the migration process completed or not, then plan to remove the SIDhistory.
How To Remove SID History With PowerShell
http://blogs.technet.com/b/ashleymcglone/archive/2011/11/23/how-to-remove-sid-history-with-powershell.aspx
Before we do this, please backup the system state to making any important change to avoid any risk. After clearing the SID history, please try to run the subinacl command to check if it
works.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Is CF the right one for me?

I am trying to decide if CF is the right language for a side
project I am beginning. I am not a beginner to web design but am
far from advanced. I have made stuff in the past and have a
knowledge of html. I also use to write software in VB6 (nothing to
crazy just small side stuff). I am embarking on a project to write
some intranet workbench software for my company. I want it to serve
as a salesmen ordering/tracking system as well as a project
management system. Obviously it is a big task and I am going to
break it into small pieces to work on over time and continue to
expand and use it.
I have seen CF before and know people who swear by it. I have
used it briefly so I have some understanding.
My question would be as to the correct way to move forward on
this project.
First, is a web project vs. a standalone installed product
the way to go?
Second, what is the right technology (CF, ASP?) I have no
knowledge of ASP so that would be a learning curve.
It is not expected to be hit by a tremendous amount of
employees. Currently we have 29 and I was going to use an access
database so any server technology should be less of a bottleneck
than my database.
I guess before I start in the wrong direction I wanted to get
some feedback on what direction you all would recommend?

Coldfusion is a kids language, a dying language, an out of
date
language, ect, ect.
No seriously, the main problem with CF is adoption. Some folk
complain about
cost, but the issue is adoption (though I am sure there is a
connection).
If CF not being as popular as other soultions is not a
problem (popularity
isn't everything), then go for it if you can afford it.
Personally I would
be considering better priced options that offer more RAD
features (Ruby On
Rails, for example, is free) - but that wuold be mostly
becasue I am not
sure what the future holds for CF and I happen to know that
the Ruby option
is much faster to code.
If CF is something you are comfortable with, then there is no
reason to not
use it - it WILL get the job done.
"ivanjay" <[email protected]> wrote in
message
news:[email protected]...
> I am trying to decide if CF is the right language for a
side project I am
> beginning. I am not a beginner to web design but am far
from advanced. I
have
> made stuff in the past and have a knowledge of html. I
also use to write
> software in VB6 (nothing to crazy just small side
stuff). I am embarking
on a
> project to write some intranet workbench software for my
company. I want
it to
> serve as a salesmen ordering/tracking system as well as
a project
management
> system. Obviously it is a big task and I am going to
break it into small
> pieces to work on over time and continue to expand and
use it.
>
> I have seen CF before and know people who swear by it. I
have used it
briefly
> so I have some understanding.
>
> My question would be as to the correct way to move
forward on this
project.
>
> First, is a web project vs. a standalone installed
product the way to go?
> Second, what is the right technology (CF, ASP?) I have
no knowledge of
ASP so
> that would be a learning curve.
>
> It is not expected to be hit by a tremendous amount of
employees.
Currently
> we have 29 and I was going to use an access database so
any server
technology
> should be less of a bottleneck than my database.
>
> I guess before I start in the wrong direction I wanted
to get some
feedback on
> what direction you all would recommend?
>

Is Logic the right programme for me?

Hi.
Im seriously considering building my own home recording system. I just want to start simple with a programme and suitable microphones to capture voice, guitar and midi keyboard.
Just wanted some advice on Logic and if its the right programme for me? Would I get the hang of it easy and what microphone would you suggest?
I want to adapt my acoustic guitar playing and singing to an electronic set up which I hope to create with the recording program and use in a live setting. Would Logic be suitable for this also?
Sorry for all the question, im pretty new to the self recording process.
Any help would be greatly appreciated.
Marc.

cramrevilo wrote:
Thanks for this. Very good advice. Should have mentioned that I have used Garage Band extensively for recording song ideas into the in built mic but nothing much more.
This doesn't count.
Seriously, FN's comment regarding Logic vs whatever being the least of your worries is exactly correct.
To get decent sound you are going to be looking at some hardware expenditure.
An "audio interface".
Your MBP's built-in audio will give you only fair sound and you will end up spending money on a mic/inst preamp that you can plug into the Mac's 3.5mm line-in.
You're better off purchasing an external audio interface, this will have mic/instrument inputs and can interface to the MBP via Firewire or USB. (Firewire is better imho)
Personally not fond of USB mics so I would recommend a standard condenser mic and cable. There are some decent models in the $100 range that sound good for both voice and acoustic guitar. The Audio-Technica AT2020 comes to mind.
There are a number of small inexpensive MIDI keyboard controllers that can do the job.
Point is, this hardware will work with any MIDI/Audio sequencer so before purchasing Logic I would take care of the hardware investment and learn the ropes using Garageband.
GB is very capable, it's built on a subset of Logic. Six months ago I used Garageband to cut a demo for an ad company, they liked it enough that all I needed to make were a few tweaks and add the voice over (all in Garageband 4.1.2) and they purchased it for both radio/TV broadcast.
A good thing to remember is more is not necessarily better, knowing how to use whatever you have will always produce better results. Good music, artistry..etc is seldom, if ever about the equipment/software.
Get the hardware stuff happening with GB, then make the jump.
pancenter-

Is JAAS the right choice for me?

I'm trying to get my head around what JAAS is and if its the right thing for me to be using for an application I'm writing. Let me describe the situation:
Its a client-server system. The client connects to the server and sends a username and password to authenticate itself. I want the server to check the username and password against the server's local accounts to check that the password is right.
Am I right in saying that JAAS will not do this and will in fact only validate the user that the server process is running as?
I there something better that I could be using?
On a slightly different note I would also like to be able to change the user that one of the threads of the server is running as. Is this possible with any pre-existing technology, or is it possible with a bit of JNI?
Mossop

Ok, maybe I should give JAAS a try then. Its a linux/unix system so I can just knock up some native code to implement a LoginModule that calls the standard PAM library
The point of changing the user that the thread is running at is to ensure that the thread cannot access any files on the server that that particular user should not have access to. Unless anyone can suggest a platform independant way of doing this, I can only think of 2 ways, both involving native code:
1. Have some native code that given a username and a filename will return what permissions the user has on the file. This would I imagine be quite a pain to write.
2. Have some native code that changes the user that the thread runs as. Then we can query files through the File interface, and what's more, bugs in the java code cannot accidentally access files that the user shouldnt be able to access.

Is AIR the right platform for photo management app?

I need to build a web-enabled photo management app with the following features:
server sign-in and authentication
photos fetched from server via REST API/XML
tag, rate (i.e. 1-5 stars), and edit properties for photos, with data updated on or sync-ed with server
all the RIA UI goodies, like multi-select, drag/drop, AJAX-style auto-complete, overlay icons on thumbs,
all the photo management goodies, like fast scrolling, histograms, resizeable thumbnail
able to handle 1000s of photos in 1 album (server is on a local LAN)
One key issue is how the platform loads an album with 1000s of photos in the background, and scrolls through pages of thumbnails. I tried before to build this in Java and all the threading issues were too much for me.
I have good experience with CakePHP & MySQL and some experience with Java, but I am resigned to learning a new platform/libs. I just need to know where to invest my learning time.
Can some experienced users pipe in on whether AIR the right platform for me to build on? Should I use Javascript etc, or learn Flex?
Is there anything out there I could just build on? I'm also considering building on Yahoo YUI or Google GWT as an alternative.
thx.
m.

Let me clarify the issue of 1000s of photo. I the app would need to load thumbnails for 1000s of photos, but only open the full size photo when the thumbnail is clicked. probably 120px max dimension, pre-rendered on the server. I have tried to open 1000 thumbs in a plain html page, and the photos come quickly - as if from the local file system - but it does seem to slow the UI until everything is loaded.
Is there a way for AIR to load the thumbnails is the current "view port" immediately, and the rest in the background? YUI has an imageLoader class that does something like this. Could I use this within AIR?
The other requirement is to manage a DB of tags ratings, and other attributes for the photos, but I can't imagine that is a big challenge. right?

What is the right charger for a MacBook Pro 13" mid 2009 model?

What is the right charger for a MacBook Pro 13" mid 2009 model? I have two chargers for two different Mac and don't know which is thankswhich. I'm really looking for specific details such as voltage/watts and all the rest to idenify my charger. A link to where to web page where I could purchase the correct charger would also be very useful. Many thanks.
All help much appreciated. THANK YOU

Both power adapter I have are different (at the magnet end) from the one in link.
Earlier adapters have T shaped connectors, which Apple later changed to the L shape, presumably to make them more abuse-proof. Either one is fine and the one you are using will not damage your Mac.
Retina MBPs and new MBAs use a completely different MagSafe 2 connector which will not fit (without an adapter).

How can i find out which Macbook is the right one for me?

I am looking into buying anew laptop and I'm currently considering a macbook as oppose to a windows laptop. which one is the right one for me?
1. I will be using it for my work at college and university so it will need to have a reasonable amount of storage and have the correct programs.
2. I use the internet alot.
3. I have an ipod touch so i will need storage for my music.
4. It will need it to be quite quick.
5. It will need to support some software that i use on windows.
Also, do you think a macbook is what i need as oppose to windows. what are the pros and cons of the macbook

Prongs wrote:
1. I will be using it for my work at college and university so it will need to have a reasonable amount of storage and have the correct programs.
This is the most important question. I would check with your school. They may have a recommendation for what you need and the software you will need to use. They also may have a discount program for you to purchase your computer. If not Apple does have an education discount plan to give you a break.
5. it will need to support some software that I use on windows.
Hard to give an answer for this as we have no idea what your going to be using or what your school requires you to use. My sons college had specific programs he had to have.

Can anyone help me with getting the best setting for me system

can anyone help me with getting the best setting for me system on cpufan it says my temp is 38c but on corecentre it says 42c can anyone help get my system overclocked any more but keeping it stable as well thanx in advance for the help

my corecenter temp sometimes says im at 60 cel at idle....and i have the most recent update...i would rely on speedfan for temp control...core center seems to always read 3 degrees higher than speedfan on my pc....
i wouldnt be too concerned...those temps are pretty low to begin with.

The Right PSU for my system

Similar Messages

Maybe you are looking for