The risk analysis results are different when choose report type as "summary" and "management" summary

Hello experts,
I found a expired user with SOD conflicts in "management summary" report format, but it doesn't exist in "Summary" report. You can find the screenshot in attached file. The user name is "YINPENG2_BK".
What happened? The result of different report formats are from different data source?
Sincerely yours,
Lynn

Hi Lynn,
that's not an issue from the system. It's more a handling issue as the results are splitted into several result sets. In management summary view you have only one result set as it's grouped by user and risk, whereas you have more than one in summary view (as you have multple entries for each user and risk).
Change to the second, third, etc. result set and you will see the user in the list:
Regards,
Alessandro

Similar Messages

CUP Risk Analysis results are not shown, continues processing request

We have several users that complain the risk analysis in CUP never finishes. Requests do not contain risks or huge amount of risks which could explain a long runtime.
With one user we checked, the user is never getting the risk analysis result on his screen. Sitting together with the user shows that the progress bar at bottom of IE is completing analysis, however the screen is not updated to show the risk analysis result and continues to show the processing circle.
On other pc's CUP risk analysis result is shown as expected, so it must be some issue in local PC Internet Explorer settings.
Environment used is Windows XP with IE 8. GRC version is 5.3.
Have any of you experienced the same? And is there a solution available that will resolve this issue, by e.g. correcting settings in IE 8?

Hello!
If you want to successfully use GRC 5.3 with IE8, you have two options:
1) Change a parameter in the server
2) use the compatibility mode.
3) Update NW
refer to [Note 1347768 - Web Dynpro and Microsoft Internet Explorer Version 8.0|https://service.sap.com/sap/support/notes/1347768]
I dismiss option 2, because it requires to change in every end user computer, so I've been working with option 1 without problems. Bear in mind that NW 7.01 is supported: [Note 1433940 - Access Control compatibility on Netweaver Java server 7.01|https://service.sap.com/sap/support/notes/1433940]
Cheers!
Diego.

Results are different when printing from CS5 and CS4

A file that printed fine with Photoshop CS 4 printed very dark when printed with CS5, with no changes made to the settings. Has anyone else had this problem?

RE: "You don't indicate what Xerox printers you have"
In my first post I named it, is that the information you need?
Docucolor 3535 using Splash 3535
That's interesting, so I have to find a way to turn off the printer's Color Management function? I mailed them, hope they can tell me how to do it easily. They usually just tell me to not use any profiles and so on, but that's the general rule in this area, I'm really tired of hearing it. Everybody seems to think profiles and LAB mode are nuclear science and I should stay away from it.
Anyway, the test image I'm using is a simple photograph (size A3, 300dpi), so no transparencies at all. I'm placing this image into an equally large ID file and print it from ID, then export it to PDF-X/3 and print it from Acrobat. Hope that helps.

Difference in risk analysis results post sp upgrade

Hi Team,
Recently we upgraded our GRC component in dev box to SP level 14. We reactivated the BC sets and ran all sync jobs.
Now the risk analysis results are very different from the non upgraded system.
Do we need to activate BC sets post SP upgrade ? Also how will be the latest rule sets released by SAP imported into the system ?
Thanks in advance.
Regards,
Anil

Hi,
Isn't ANALYZE outdated for R12?
You may still use the Analyze command in 11g Database (R12 is application version), and is not obsolete.
Please refer:
Analyzing Tables, Indexes, and Clusters
Ask Tom &quot;analyze in 11g ,not obsolete?&quot;
How would this resolve the issue?
If the optimizer is not updated with the latest statistics in database, then the COUNT(*) will not be updated and as a result the count will be showing a lower value.
I suggested you to perform an analyze or gather schema statistics in order to eliminate probable cause for the issue.
Thanks &
Best Regards,

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I think this is probably a sign that your network could be better than it is.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

I try to find something on my iPad, many results are emails, when I push on an email I can't see the email, because I get ever the first email,or the previous selected email in my inbox. How can I see the email selected?

I try to find something on my iPad, many results are emails, when I push on an email I can't see the email, because I get ever the first email,or the previous selected email in my inbox. How can I see the email selected?

Is your Yahoo account set up as POP3 or IMAP?

My images in my welcome page are different when viewed on the internet!

My images in my welcome template are different when viewed on the internet! After a while they don't change anymore. Isn't this so basic....?

Please provide your url so someone can see what you are talking about.

My zagg key board connects but the keys I type either don't type character, type 2 characters that are different when I hit only 1 key, or doesn't type at all. Is there a way to reset zagg keyboard to factory settings?

My zagg key board connects but the keys I type either don't type character, type 2 characters that are different when I hit only 1 key, or doesn't type at all. Is there a way to reset zagg keyboard to factory settings?

Recharging is a good thing to try. They do start to act odd when the battery gets low. Beyond that, just like Tom says, contact Zagg. I have one of their keyboards and the company has wonderful customer service.

I have a few hundred duplicates in my iPhoto library, but the file sizes are different. So one is 1.3mb and one is 567kb. I want to delete the smaller ones, but short of comparing each duplicate, is there a way to do this?

I have a few hundred duplicates in my iPhoto library, but the file sizes are different. So one is 1.3mb and one is 567kb. I want to delete the smaller ones, but short of comparing each duplicate, is there a way to do this? I've been looking at Duplicate Annhilator but I don't think it can do it.
Thanks!

I just ran a test with iPhoto Library Manager, Duplicate Annihilator, iPhoto Duplicate Cleaner, Duplifinder and Photodedupo. I imported a folder of 5 photos into a test library 3 times, allowing iPhoto to import duplicates. I then ran the 5 photos thru resizer to reduce their jpeg compression but all other aspects of the file the same.
None of the duplicate removal apps found set that was reduced in the file resizer. That's probably due to the fact that the file creation date was being used as a criteria and the resized photo would have a different file creation date even though the Image Capture date was the same.
They all found the 3 regular duplicates and some of them would mark two and leave the 3rd unmarked. iPhoto Duplicate Cleaner can sort the found duplicates by file size but if the file was edited to get the reduced file size it might not be found as it would have a different file creation/modification date.
iPhoto Library Manage was able to find all duplicates and mark them as such if the file names were the same the the filename option was selected. Otherwise it also missed the modified, resized version. It allowed one to select the one photo to save before going to work on the library.
So if a photo has been reduced in image quality or pixel size it will not be considered a duplicate.
OT

New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]

After scanning my document and converting to Microsoft Word the size of characters are different

After scanning my document and converting to Microsoft Word the size of characters are different and things like puntuation are distorted. How do I get the uniformity like the original?

Of course what lands in the Word file will differ from the viewed picture/image of text created by the scanner.
(The output of all scanners is always an image file. For an image of textual content the best output file format is TIFF.)
So you scan the hardcopy of text.
The scanner output image (picture) is brought into PDF.
At this point the only PDF page content that you can export to Word is the image (nope, no "text" just the image).
Consequently you use Acrobat's OCR feature to do OCR of the image of text.
With a decent paper source, proper resolution and a black and white image you'll get acceptable accuracy of recognition of the pictures of the characters.
(the Optical Character Recognition)
Acrobat's Searchable Image and Searchable Image (Exact) provides output that used text rendering mode 3 (no fill, no stroke for the glyphs).
So, invsible / hidden text.
The third OCR method is ClearScan.
You could play with each of the three to see what goes into a Word file.
Might try export to RTF, DOC and DOCX as well.
Anyway -- What is exported is the OCR output; Not the image of text.
And, of course, the image of the text is not the imprint on the paper that was scanned.
Each step to the way you have some deviation.
Once you have the exported PDF content in a Word file you can use Word to cleanup as desired / needed.
OR
Prop up the hardcopy and transcribe to a Word file.
Be well...

Item numbers are differing when i am creating billing document.

item numbers are differing when i am creating billing document with reference to delivery.
eg: item 10 Nimusulide
item 20 paracetomol
but in invoice it is as follows
item 50 Nimusulide
item 100 paracetomol
plz help me

Hi,
In VOFA check field item number increment
This will be maintained as 50.Change it to 10.
Reward points if useful
Regards,
Amrish Purohit
Message was edited by:
AMRISH PUROHIT

Skipping the risk analysis

Hi All,
I have CUP .net version in GRC.We have a risk analysis mandatory for every request.I want to know if I can skip the risk analysis for some orders in CUP.How I can do it.
Thanks in advance

Yes, you can skip.
Goto -> CUP Configuration -> Workflow -> Stage -> Addition configuration -> Risk Analysis Mandatory ->NO
Suggest you to perform risk analysis if its part of your process..
Rakesh

How the **** do i get back my library i was just using.No didn't save image or restore been using it for months the same way no tells me to choose or create a library and my previous versions don't recover

How the **** do i get back my library i was just using.No didn't save image or restore been using it for months the same way no tells me to choose or create a library and my previous versions don't recover.Please help I just deleted all doubles did allmy artwork Etc..

Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store

Can apple determine the location of my stolen iphone when iy was powered back on and the remote data erase was initiated?

Can apple determine the location of my stolen iphone when it was powered back on and the remote data erase was initiated?

What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T, Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. Lost or Stolen iPhone? Here’s What to do
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on MobileMe
3. OS X Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
1. VUWER 1.5.4
2. Sneaky ******* 0.2.0
3. Undercover 4.7
4. LoJack for Laptops Premium Mac
5. STEM 2.1
6. MacPhoneHome 3.5

The risk analysis results are different when choose report type as "summary" and "management" summary

Similar Messages

Maybe you are looking for