The role of multicasting in clustering

I'm looking to clarify the role of multicasting in WLS clusters. As I understand it, multicasting is used exclusively to exchange heartbeats - and in-memory replication of sessions and EJBs is a point-to-point exchange. Is this correct?Thanks.-C

Multicast is also used for the replicated JNDI tree. Otherwise, correct.
          cyrano wrote:
          > I'm looking to clarify the role of multicasting in WLS clusters. As I understand it, multicasting is used exclusively to exchange heartbeats - and in-memory replication of sessions and EJBs is a point-to-point exchange. Is this correct?Thanks.-C

Similar Messages

Migrate SOFS Role between 2012 R2 Clusters

I have a sofs role configured on a 2012R2 3 node cluster, and I need it moved to a different cluster so that the nodes on the current cluster can be rebuilt. Both clusters use a CSV. The share that is used by the sofs sits on a CSV (connected by iscsi on
each node)
Im trying to understand the advice here:
http://technet.microsoft.com/en-us/library/dn659431.aspx
Method 1 is confusing because it discusses migrating virtual machine storage with VMM but I dont see how this relates to a SOFS.
Method 2 seems most applicable, however when I use the 'Copy Cluster Roles Wizard, and I select the source cluster, it brings up a list of role available to be migrated, and I cannot select the single SOFS I want to move. If I check one box, it automatically
checks the box for every role on the cluster, and I dont want to move everything.
Also, im confused about the process of the migration and what exactly migrates once I get past the first issue above.
Should I be running this wizard to migrate the role to the new cluster, then connecting the iscsi for the lun to the 3 destination nodes and mounting as a csv ? and then disconnecting the csv from the source cluster ? or vice versa ? or?
cant find a good guide for this. Any advice or pointers in the right direction much appreciated.
tks

Hi dfgsdfgf,
Could you clarify “and I select the source cluster, it brings up a list of role available to be migrated, and I cannot select the single SOFS I want to move.” If I am not
misunderstanding, are you trying to “migrate” one of the SOFS cluster node to new server? You must migrate the SOFS role, but can’t the node.
More related information:
How to Move Highly Available (Clustered) VMs to Windows Server 2012 with the Cluster Migration Wizard
http://blogs.msdn.com/b/clustering/archive/2012/06/25/10323434.aspx
Migration Paths for Migrating to a Failover Cluster Running Windows Server 2012 R2
http://technet.microsoft.com/en-us/library/dn530781.aspx
Migrate Cluster Roles to Windows Server 2012 R2
http://technet.microsoft.com/en-us/library/dn530779.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Creation of a second Exchange 2013 server on a different site (with the roles of MBX and CAS) fails on prepare active directory and prepare schema.

Hello everyone
I have a network infrastructure consisting of 3 sites, site A, site B, and site C. i have 2 domain controllers on every site, and the AD roles are on the primary domain controller on site A. On site A I have an Exchange 2013sp1 CU6.
I want to create a second Exchange on Site B, with the roles of mailbox (the exchange on Site A will be first DAG member and the Exchange on Site B will be the second member of the DAG) and CAS.
First question: Is my thought correct about installaing on the same server mailbox and CAS server?
Second question: how many DAG witnesses I need for the DAG? One per site, or one in general (for example located on site A)
Third question: When I am trying to perform “Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms” I receive the error
“ Setup encountered a problem while validating the state of Active Directory:
The Active Directory schema version (15303) is higher than Setup's version (15292). Therefore, PrepareSchema can't be executed. See the Exchange setup log for more information on this error. For more information, visit:
http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx “
I tried to run the PrepareSchema from the ISO of Exchange 2013 SP1 and form the extracted content of Exchange 2013SP1 CU6 archive, but still receive the same error. Any ideas?
Thanks in advance.

Thank you for your answer,
I have tried to run "Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms” from
Exchange 2013 CU6 media, but I still receive the error:
The Active Directory schema version (15303) is higher than Setup's version (15292). Therefore, PrepareSchema
can't be executed. See the Exchange setup log for more information on this error. For more information, visit:http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx “
any ideas?

What is the Roles Of Bridging Account

*What Are The Roles Of These Accounts Bridging, Non-Invoiced Sales Orders And Non-Invoiced Revenue in Periodic Account Assignments form? [ID 1335054.1]*
The Expense account is there to accommodate European accounting practices.
The Bridging account (as seen in WIP accounting classes) is used only in France.
The bridging account (and possibly others) was included at the request of the Global Accounting Engine team on behalf of France in the setup form at design time; but it has never been used as it was decided that transfer To GL would remain manual for the moment. In other words, today PAC only generates distributions based on GAAP/Brazil accounting.
In other words: In US accounting, when you put something in inventory it is accounted as an asset, in France it is accounted as an expense; so during a period you total all expenses and at the end of a period in order to do a fiscal Profit and Loss, you "convert" to assets by using a bridging account : you debit the inventory account and credit the bridging account. This is done by Product Nature: So you have a Bridging account for raw materials, for finished goods and semi-finished.
The fields 'Non-invoiced Sales Orders' and 'Non-invoiced Revenue' was set up with a view to replacing the functionality (used in Europe) that is currently provided by the Global Accounting engine (AX). However, this has not yet been implemented in the apps - which currently support only US GAAP & Brazilian accounting as methods of generating distributions from PAC.
User Guide
2 – 72 Oracle Cost Management User’s Guide
Bridging: This account is optional.
You can also optionally enter an Analytical Invoice Price Variance, Analytic a l Purchase Mirror, Non–Invoiced Sales Order, Non–Invoiced Revenue, Analytical Revenue Mirror, Analytical Margins of Goods Sold, and Average Cost Variance account.
Edited by: Deepkumar Sivanandan on Aug 25, 2012 11:56 PM

Hi Thaman,
Responsibility of functional consultant in ESS/MSS:- Functional configuration under SPRO > Employee self service and manager self service, then preparation of Functional specification design (FSD) if any deviation from standard SAP, Unit test plan preparation and all functionailty testing
Responsibility of Technical consultant:- Preparation of Technical specification design document (TSD), activation of work flow and creation of workflow if additional is required. Creatio of form like vacancy requisition form, new position creation form etc.
Also some kind of technical configuration is there in SPRO for workflow and form
Regards,
Purnima

What is the role of a Policy CA

Hello All
Can someone please help me with the following question please (thanks in advance)
I read the following (from another post on this forum regarding Policy CAs)
The role of a policy CA is to describe the policies and procedures that an organization implements to secure its PKI, the processes that validate the identity of certificate holders, and the processes that enforce the procedures that manage certificates.
A policy CA issues certificates only to other CAs. The CAs that receive these certificates must uphold and enforce the policies that the policy CA defined.
It is not mandatory to use policy CAs unless different divisions, sectors, or locations of your organization require different issuance policies and procedures. However, if your organization requires different issuance policies and procedures, you must add
policy CAs to the hierarchy to define each unique policy. For example, an organization can implement one policy CA for all certificates that it issues internally to employees and another policy CA for all certificates that it issues to non-employees.
Now the statement above
The role of a policy CA is to describe the policies and procedures that an organization implements to secure its PKI
To me that sounds like the CPS?
My understanding is the CPS is simply a document (normally a text file) which can be access via a URL (e.g. HTTP) in the same manner as a CRL. If that is the case is the location of the CPS detailed in a known extension like the CPD extension?
Also
How do you 'enforce' the Policy as detailed by the Policy CA, for example
Lets say we have three level PKI, Root > Policy CA (only issued cert to issuing CA) > Issuing CA
Now as far as I am aware with an Enterprise AD joined CA (issuing CA) requesting and obtaining certificates is controlled by Templates and these Templates are controlled by Security ACL (AD security) detailing who can Read, Enroll, Auto-Enroll
for a certificate (e.g. WEB Server) based on these templates.
If the above is correct where does the Policy CA come in, in as much as 'enforcing a given policy' for example lets say the Policy CA states any certs issued by me to Issuing CA's these Issuing CA can only allow the WEB Server
template. What is to stop an Admin giving Read, and Enroll permissions for the Code Signing template, and thereby issuing Code Signing certs from the Issuing CA.
Are the Policies setup on the Policy CA (I assume you somehow setup Policies hence the name?) related to EKU, for example when the Policy CA issues a CA Cert (basic constraints) to the Issuing CA, does the Policy CA set certain EKU (which
I understand are known OIDs) in the CA cert it issues to the Issuing CA, some how preventing the Issuing CA from issuing a Code Signing Cert for example?
Any advice most welcome as I would really like to understand the machanics of the above
Thanks All in advance
AAnotherUser__
AAnotherUser__

> To me that sounds like the CPS?
exactly.
> If that is the case is the location of the CPS detailed in a known extension like the CPD extension?
yes, it is called Certificate Policies extension. Go to
https://www.verisign.com or https://www.digicert.com, THOUSANDS OF THEM!!!111oneone and examine their certificates in the Details tab. There you will find a Certificate Policies extension, that will include policy
OID (mandatory) and a combination of User Notice and/or CPS location url. Windows certificate GUI control fetches this extension and active Issuer Statement button in General tab. If the certificate contains only User Notice, a small dialog with User Notice
will appear. If there is an URL, you will be redirected to the URL referenced in the Certificate Policies extension.
> If the above is correct where does the Policy CA come in, in as much as 'enforcing a given policy' for example lets say the Policy CA states any certs issued by me to Issuing CA's these Issuing CA can only allow the
WEB Server template.
this assumption is incorrect. CPS does not restrict on certificate types allowed to you. CPS defines the procedure which is used to issue certificates to you. For example, authentication (user name and password combination, hardware tools, biometric or even
face-to-face meetings) procedure, criteria list you should pass in order to get the certificate, your and CA (relying parties) liability, responsibility and certificate usage rules. Certificate is not your property, it is a property of the issuing CA
Consider a certificate like a personal passport (ID card). Passport is not your property, it is a property of the issuing organization (state organization). Before getting the passport, you are submitting documents that prove your personality (entity). If
you are supplying birth passport it is a sort of initial enrollment, if you submit existing passport -- it is re-enrollment (everything like in certificates). You are signing an agreement between you and state. This agreement is a CPS, it defines the passport
issuance terms (validity, re-enrollment procedures, etc.) and usage policies. You shall not give your certitificate to 3rd parties (except the ones allowed by a government). You shall notify issuing organization if you lost the passport, or it was lost. You
can continue these parallels (between your passport or person ID card with digital certificates).
Regarding technical enforcement. Policy CA can define multiple policies. All of them are listed in the Policy CA certificate itself. All certificates issued below (unlimited levels down), all certificates must belong to any of the mentioned policy. RFC5280
defines the certificate policy OID constraint validation. If constraint is violated, certificate chaining engine will report an error. If Policy CA defines policy with OId=1.1.1 and some certificate below is issued under policy 1.2.1 --
the certificate will become invalid, because of constraint violation.
Since it is bare measure, an owner of Policy CA should perform regular audits of its members to verify whether the policies are followed. Policy CA may stop relationships with child CA (by revoking child CA certificate) if policy violations are found during
audit.
> some how preventing the Issuing CA from issuing a Code Signing Cert for example
it is possible, but not mandatory. Policy CA certificate may define only particular EKUs allowed below. It can be done via specific EKU in the policy CA certificate, application policy constraints, or extended properties.
> I would really like to understand the machanics of the above
you are going to be a PKI expert!
Ok, I wrote a ton of words, but the reality is not that bright. Policies are violated, constraints are not followed. Eventually, who cares? Comodo has enough strict CPS, but constantly issues legitimate certificates to unknown persons, because someone calls
to Comodo and says "Hello, I'm from Google, please, send me few certs" and they send. Many years ago, VeriSign failed in the same way. Who said that EKU extension is strictly followed? Examine the certificate at
https://login.live.com. Intermediate CA is not eligigle to issue end entity certificates for other purposes (EKU) than the ones listed in its own certificate. REALLY? But who cares? IE doesn't care. Policy constraints are
violated? Who cares if nobody will notice that (I didn't see the app that would complain so loud). But all this doesn't matter that you can do the same way. You still need to follow all rules, recomendations, best practices even if they are not mandatory.
It is a part of your PKI's success.
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell FCIV tool.

What is the diffrence between multicasting and broadcasting?

hi friends
What is the diffrence between multicasting and broadcasting?
i'm bit confused in multicasting and broadcasting.

Broadcasts go everywhere within a range determined by the sender.
Broadcasting is deprecated and unliikely to go beyond the nearest router.
Multicasts go everywhere where receivers have declared they are present.
Multicast can be implemented beyond routers in a WAN which you control but ISP routers generally don't support it.

How do get the role from ldap session.

i am using the follwing getting the role from the request in openldap and j_security_check:
f(request.isUserInRole("manager")){
how can i use this in the session:

You might wanna change permissions for that attribute ...
Change it from Admin to OWNER and you should be able to then get it for any user ...
HTH ..

How to get the Role from a process

Hi,
I have a process where I have different role panes with human intervention activities. Each human intervention invokes a screenflow.
Is there any method by which I can get the role pane from which an intance is generated
For e.g. in process P1, I have 3 different role panes i.e. R1, R2, R3. Suppose there is an human intervention activity A3 in R3. It invokes a screenflow in which there are different methods. I want to get the roleId here i.e. R3.
Through creation data I can know the instance creator i.e. participant ID, but a participant can have more than one role. I want to get the role from which the Human Intervention activity is invoked.
Please suggest / help.
Thanks
Jayant

Hey Thanks a tonn
It works fine by the following code
role = Activity.role
logMessage "message"
logMessage "Role: " + role.name
role.id returns an int, so I used role.name
Thanks and Regards
Jayant

From which table we can get the Role of the User in SRM

Hi All,
I need to prepare a report which displays the user and his role in srm. So from which table i can get the role of the user if i have the Userid.
Thanks
Channappa Sajjanar

Hi
t- code
SUIM->rOLES->BY USER ASSIGNMENT
SELECT WITHASSIGNMENT OF USER = username
AS A OUTPUT YOU MAY GET ROLE ASSIGNED TO THAT USER.
if you want which FM - you debug while executing this report.
regards
Muthu

Issue with the ROLES in Precalculation of WebTemplate in Reporting Agent.

HI BWers,
I am having trouble in understanding the functionality of ROLES and USERS in the Reporting Agent.
My goal is to pre-calculate WebTemplate,so the users can get the data results based on their ROLES.
-> When I select ROLES under Authorizations in Reporting Agent; my understanding was it will just pre-calculate the WebTemplate based on Roles. But, when I look at the job details its doing for the Users. I opted for ROLES because I have 10-Roles and 100-Users, so the job runs for only Roles.
-> I don't want to select the Users, as it will take longer time and uses lot of system resources.
Can I just run for ROLES, for that under Authorizations in Reporting Agent do I need to select Precalculate User-Specifically and Select ROLES or just selecting ROLES will do. I tried both, just selecting ROLES is not working and selecting Precalculate User-Specifically & ROLES is not yielding the required results.
Could you please throw some light on it, I am on BW 3.5 & SP15.
Any help will be highly appreciated.
Regards,
swordfish.

Hi,
If you choose the Precalculate by User option, all the data and HTML pages for the Reporting Agent setting are precalculated for each of the selected users in a single job. This applies in both the cases: Roles or users. When you specify a role after selecting the option 'Precalculate by User', the precalculation will be done for all the users assigned to that role and not the role.
Roles/Users is just 2 different ways of giving the user restriction. If you specify the roles, the system will precalculate for all the users assigned to the role. If you have few users for whom you want the precalculation to be done, then you can specify the user IDs. If you have many users assigned to a particular role for whom you want the precalculation to be done, then you can specify the role.
Regards,
Shilpa

How to add a role description to the Role Library:Role Information Column

Hi to all,
I have an interesting question.I have a task to show a role description in the role sorting table information column.Is there any way to get this parameter ?
I tried with waveset.roleinfos.info.description but nothing happened.I saw that in some forms is used waveset.availableRoleInfos[$(rolename)].info.description, but i can not understand what is this parameter actualy for and from where it comes (and i did not get anything from it either when i tried with it).
So my question is is there any way i can add this description attribute to the Information role column ?

Hi Mariana,
one way is to use the role upload if you want to use existing BI roles in Portal:
Here are more infos: http://help.sap.com/saphelp_nw04s/Helpdata/EN/9d/8c174082fe1961e10000000a155106/frameset.htm
Regards,
Adem

Send to a Particular Person in the Role

Hi,
I would like to implement sending the task to a particular person in the role. Currently, GP will send the request to all the personal in the Role.
How do I control in such a way that there is only a task send to a particular person of concern of that Role.
For example,
The Role - ApprovingOfficer consisting User : user A, user B and user C
If I am from dept A I should send my request to user A, rather than also sending to user B and user C (which is what the current GP is )
how to I do that? can advise?
thank you.

Hi,
Do you have any sample or guideline on how do I dynamically input the particular to "Filled from context Parameter" ?
As there are a few users can be of the same role. But depend on who I select the users dynamically from the WD UI, the task will be route to the particular user for action. (instead of all user of that Role now).
thank you in advance.

Can the role info be passed from portal to ABAP web dynpro application

Hi,
We have some roles in the portal. We call the ABAP web dynpro applications from the portal. Is it possible to pass on the role from the portal to the Web dynpro ABAP application so that we can use this role information in the application.
Thanks,
Pooja

Hi,
you can try to add the expression
role=<IView.PCDUnit>
as part of the Application Parameters in the iView. This will be the role in 99%. However not all iViews started in the Portal must belong to a role. You can start iViews using page navigation that are not part of a role. Therefore the PCD does not talk about roles but about "units" which is the superordinate term.
the value will be the PCD path of the role - e.g:
portal_content/myFolder/roles/myRole

How to change the ROLE: Integration server in business system in SLD

Hi,
I am facing error in communication, becuase the integration server has been attached to in correct business system with incorrect client (001 instead of 700).
In SLD, business system, 'integration' tab there is button "Associate with XI'.
I have selected the role as integration server for the corrrect business system and aslo gave the correct pipeline url for integration server.
When I press the button "Associate with XI" and Save nothing happened.
How do i change my integration server.
Please help.
Regards,
Rehan

Hi Gaurav,
I have checked the teachnical system and its of type WEB AS ABAP. and when i click on the business systems tab, there are two business systems. When i double click on the business systems
I realised that both the business systems has been defined with role: integration server.
IN one business system i can see that there is "associate with XI" button.
But when i want to chnage the business system with correct client 700 , i tried pressing the button after entering the correct pileline url.... nothing happens.....
Can you please let me know the procedure to chnage the technical system with respect to integration engine???
PLease help as our project is held up due to this.
regards,
Rehan

Error importing SharePoint site collection - "there is an error during importing the Roles tag"

Hi, we are having trouble restoring a SharePoint 2010 site collection using our DPM 2012 installation. The recovery process goes fine (restore of the database, attach to the sql server, export into WFE's filesystem) and the last phase, the SharePoint import,
seems to end with an exception. We see this in the WssCmdletsWrapperCurr.errlog file:
Caught Exception while trying to import Url .....
Exception message =
There is an error during importing the Roles tag
Exception Stack =
at Microsoft.SharePoint.Deployment.ReadAttribute.String(....
It looks like it is a SharePoint import issue, but I'm not sure. We have tried to restore the site into an empty one, and the exception appears again, although it *seems* that the content has been recovered. We have imported using the security info
on the recovery point.
I've searched for that error message in the Net but I've been unable to find anything appropriate.
Do you have any hints?
Thanks.

Hi, we are having trouble restoring a SharePoint 2010 site collection using our DPM 2012 installation. The recovery process goes fine (restore of the database, attach to the sql server, export into WFE's filesystem) and the last phase, the SharePoint import,
seems to end with an exception. We see this in the WssCmdletsWrapperCurr.errlog file:
Caught Exception while trying to import Url .....
Exception message =
There is an error during importing the Roles tag
Exception Stack =
at Microsoft.SharePoint.Deployment.ReadAttribute.String(....
It looks like it is a SharePoint import issue, but I'm not sure. We have tried to restore the site into an empty one, and the exception appears again, although it *seems* that the content has been recovered. We have imported using the security info
on the recovery point.
I've searched for that error message in the Net but I've been unable to find anything appropriate.
Do you have any hints?
Thanks.

The role of multicasting in clustering

Similar Messages

Maybe you are looking for