The router is very busy at the moment on RV042

Hi
I recently activated Cisco protectlink web and started getting problems:
The router is very busy at the moment.
This error occurs when more than 6 people access the internet.
Small Business
RV042  10/100 4-Port VPN Router
Firmware Version : v4.2.1.02 (Jan 18 2012 14:10:55
Please help

Hi Bynx, thank you for using our forum, my name is Johnnatan I am part of the Small business Support community. I apologize for the issue you are having, the low performance it could be cause due multiple factors. You are running the last firmware version, however  did you perform a factory reset as soonest you updated the firmware? If not, I advise you to save a backup of your configuration then perform a factory reset. And set just the basic configuration. It is possible that the CPU is overload it capacity if it has activated multiple services such as IPS, multiple tunnels, IPsec, certificates, etc.
I hope you find this answer useful,
*Please mark the question as Answered or rate it so other users can benefit from it"
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

Similar Messages

  • I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green

    I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green. I've tried going through my new MacBook Pro settings and it the diagnostics check, it says network changes detected, I tell it that it "yes" does connect to a cable modem, it tells me to restart it, after I do it asks if there are any other devices hooked up ( firewall) and when I say no it tells me that it can't fix the problem.
    Now I know that I probably have a new IP address because of the cable company switching the boxes but it was working fine with the other box, now there isn't a signal to be had on it!
    Please anybody out there that can help!!!??

    Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.

  • Why can't I connect to my brother MFC-J4510DW printer wirelessly? The printer is connected to the router and I can surf the web. I wonder if some security setting may be keeping it from connecting to my MacBook Pro.

    Why can't I connect to my brother MFC-J4510DW printer wirelessly? The printer is connected to the router.
    I can surf the web. My wife can print from her PC wirelessly on it.
    I wonder if some security setting may be keeping it from connecting to my MacBook Pro. I've installed the software, firmware and driver updates but
    it still shows "off line"
    with the printer power on. Any suggestions?

    All I can suggest right now is back up first the try to reset the printing system, (all printers in the list will be removed).
    Then connect directly to the printer via ethernet or to the Mac using USB and restart the efforts you have made up until now.
    As for router settings, it's possible but not likely that your router only allows a small number of clients. It's also posible that you have MAC address filtering on, lastly are you using the correct wireless protocol, (802.11a/b/g WEP or WPA etc)?

  • The browser Working very slowly at the first time open or when i open a new link And not as well as by And I have Operating system xp sp3 Updated

    the browser Working very slowly at the first time open or when i open a new link
    And not as well as by
    And I have Operating system xp sp3 Updated
    And i get Stop in the script

    '''I fixed mine by removing the Ask.com extension.'''
    Tools
    Add-ons
    Settings icon
    View Recent Updates
    Ask.com '''DISABLE'''
    Running FF 8.0 on Windows 7 (64-bit)

  • TS1398 My iphone 3G only gets wifi if its within 1 ft of the router. I have had the antenna replaced but its no better.

    My iphone 3G only gets wifi if its within 1 ft of the router. I have had the antenna replaced but its no better. I have restored to factory through iTunes but still not working. 3G signal is good

    Try these steps. Check to see if your router has a firmware update. Go to the manufacturers website and check. If so, install. If not, reset the router. Disconnect from power for 30 seconds, plug it back in. Wait for it to boot up and then check your wifi.
    Do a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, check wifi.
    If none of this helps, then make an appointment at the Apple store to have the hardware checked. If it is found to have a hardware defect, they will more than likely replace the device. Remember the final call is Apple's.

  • I use itunes on a Dell XPS502 with W7/64. In some cases have have problems to import CD's. The sound is very disturbed and the import need a lot more time than in normal cases. Is there a problem between itunes W7/64 or a known hardware issue?

    I use itunes on a Dell XPS502 with W7/64. In some cases have have problems to import CD's. The sound is very disturbed and the import need a lot more time than in normal cases. Is there a problem between itunes and W7/64 or a known hardware issue?
    Example-CD : "Tracy Chapman , Telling stories" is not able to import . I have more such negative cases. But in other cases it works fine and the sound is great.
    The firmware at the inbuild CD/DVD DS-6E2SH is the latest version.
    What can I do??

    hi b noir,
    I don't no about virtuel drives like you mententioned. In the mean time I have rebooted the XPS and run again the iTunes diagnostics. I think the back - chance in the registry was not ready to use.  Now there are another results. They are the same in case of a running CD or a not running CD. The difference in total is like before. It takes more time that iTunes reads the (bad) CD and at the there is no good sound. In both cases ( running or not running CD) iTunes diagnostics gives as a result :
    (the copie from ITunes shows the result of the not running CD from Tracy Chapman)
    Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
    Dell Inc. Dell System XPS L502X
    iTunes 10.3.1.55
    QuickTime 7.6.9
    FairPlay 1.11.17
    Apple Application Support 1.5.2
    iPod Updater-Bibliothek 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.4.0.25
    Apple Mobile Device Treiber 1.55.0.0
    Bonjour 2.0.5.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes-Seriennummer 00D7B2B00CD25750
    Aktueller Benutzer ist kein Administrator.
    Aktuelles Datum und Uhrzeit sind 2011-06-11 19:33:22.
    iTunes befindet sich nicht im abgesicherten Modus.
    WebKit Accelerated Compositing ist aktiviert.
    HDCP wird unterstützt.
    Core Media wird unterstützt.
    Info zu Video-Anzeige
    NVIDIA, NVIDIA GeForce GT 540M
    Intel Corporation, Intel(R) HD Graphics Family
    **** Info für externe Plug-Ins ****
    Keine externen Plug-Ins installiert.
    iPodService 10.3.1.55 (x64) arbeitet zurzeit.
    iTunesHelper 10.3.1.55 arbeitet zurzeit.
    Apple Mobile Device service 3.3.0.0 arbeitet zurzeit.
    **** CD/DVD-Laufwerkstests****
    LowerFilters: PxHlpa64 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.2.0.1),
    D: PLDS DVDRWBD DS-6E2SH, Rev CD11
    Audio-CD im Laufwerk
    11 Titel auf der CD gefunden, Spieldauer: 42:07 auf Audio-CD
    Titel 1, Startzeit: 00:02:00
    Titel 2, Startzeit: 03:59:47
    Titel 3, Startzeit: 07:19:27
    Titel 4, Startzeit: 11:31:30
    Titel 5, Startzeit: 15:31:50
    Titel 6, Startzeit: 20:07:50
    Titel 7, Startzeit: 24:27:15
    Titel 8, Startzeit: 27:49:10
    Titel 9, Startzeit: 32:41:25
    Titel 10, Startzeit: 35:29:65
    Titel 11, Startzeit: 38:38:00
    Audio-CD erfolgreich gelesen (Suche nach alter Firmware).
    Laufwerksgeschwindigkeit erfolgreich erkannt
    Die CDR-Geschwindigkeiten des Laufwerks sind:  4 10 16 24
    Die CDRW-Geschwindigkeiten des Laufwerks sind:  4
    Die DVDR-Geschwindigkeiten des Laufwerks sind:  4
    Die DVDRW-Geschwindigkeiten des Laufwerks sind:  4
    After starting the import it is going slower and slower. If it is helpful I can send you a soundfile with these distortions.
    best regards
    tcgerd

  • The text is very small on the dropdown menu of the new adobe reader XI version 11.0.07, can I make it bigger?

    The text is very small on the dropdown menu of the new adobe reader XI version 11.0.07, can I make it bigger?

    Hi,
    Please check the solution posted here:
    Opened AR today font size in super small, went to "preferences" and so on, did changes, nothing works, what's the deal???
    Best,
    Luc

  • HT4623 After updating Iphone 4s to 6.0 the signal is very weak and the phone drops calls frequently.

    After updating Iphone 4s to 6.0 the signal is very weak and the phone drops calls frequently.

    Based on what?
    "When Apple rolled out iOS 6.1, its first major update to iOS 6, yesterday, it introduced a series of bug fixes, software tweaks for iTunes and Siri and also added LTE support - but none of that was any use to the disconnected and discontented sufferers of a particular iPhone software flaw: greyed-out Wi-Fi."
    http://www.theregister.co.uk/2013/01/29/ios6_wifi_flaw_no_fix/
    The phone is an iphone 4
    (converted from a 3g and still have the habit of referring to it as a G)

  • Can i use my blackberry torch charger to charge my iPod4s? The charger looks very similar to the 5W USB power adaptor that Apple sells to charge the iPod?

    can i use my blackberry torch charger to charge my iPod4s? The charger looks very similar to the 5W USB power adaptor that Apple sells to charge the iPod?

    Actually, the bb charger is a 5V, 750 mA charger (which would make it a 3.75W charger vs the 5W that Apple sells for the iPod). Therefore, I would think that my bb charger should work for both bb and iPod, but would charge the iPod at a slower rate, with little harm done to the gadget, but I defer to any opinion that would suggest otherwise?

  • I have an email thread that has become unprintable (and in some cases unreadable) because each email in the thread is indented and eventually the text is very far to the right margin and even beyond.  How do I correct this?

    I have an extremely long and important email thread that has become unprintable (and in some cases unreadable) because each preceding email in the thread is indented and eventually the text is very far to the right margin and even beyond.  Some of the text is even showing up as only 1 letter per line.  I tried selecting all and then left justifying it, thinking that that would shift everything to the left, but it didn't work.   When I go to print the thread, it shows as 344 pages, which although long, I can't believe it's that long.  What do you think happened to cause this and can it be corrected?

    Ick. So it can't just work sensibly? Sensible would be either autosave overwrites previously autosaved versions or all autosaved versions would be deleted when the message is finally sent. Allowing previous message versions to accumulate endlessly might be beneficial to someone, but does not seem like sensible default behavior.

  • How strong is the router that is built into the iMac

    How strong is the router that is built into the iMac??
    Can you give me a internetadress??
    Thanks a lot.

    How strong is the router that is built into the iMac??
    Router do give some protection, but firewalls provide more security.
    For more security, you should look into:
    Little Snitch
    http://www.obdev.at/products/littlesnitch/index.html
    Can you give me a internetadress??
    Thanks a lot.
    Software routers do not give out internet addresses. A program called DHCP gives out internet address.   Your ISP will give your router an internet protocol address.  If you have a separate router box, it's DHCP program will dish out another Internet Protocol address to your mac.
    RObert

  • I have a new macbook pro hooked up to a belkin wireless router. My HP officejet printer is also connected to the router. I cannont get the printer to work from my computer without restarting my computer evertime I want to print. How do I fix this?

    I have a new Macbook Pro hooked up to a new Belkin wireless router. I can connect to the internet without a problem. I have an HP officejet printer hooked up the the router to work wirelessley, The router is reading it as connected. My computer reads it as offline. If I reset my computer it will print whatever the first thing is in the que but nothing else and does not work after that. Is there some sort of setting that I am missing? I am trying to set this printer up to work wirelessly from three mac laptops in my house but I can't even get it to work on one right now. Any help would be awesome

    Mac OS X 10.7 Help: Troubleshoot a network printer

  • The volumn is very low on the computer or playing CD's.

    I do not Skype or anything like that - all I want to do is to listen to & burn CD's, but I haven't been able to do so as the volumn is too low.  I attached speakers (speakers which were on my old computer & worked fine), but the volumn
    is very faint on both the computer ads itself or a CD playing.  I saw some of the same questions dating back to 2010 & there didn't appear to be any resolution at the time, not unless I'm just not seeing it.  I'm hoping that's
    not the case - Waiting for your response as I have not been able to use the feature from the delivery date of Dec. 12th.

    DeeDee
    There can be many reasons for this to happen.
    1-a corrupt driver.  Go to start>search>device manager>enter
    Look for the audio device (sound,video, game controllers) and make sure none of the devices have a  yellow exclamation point on them ("!") Then look in audio inputs & outputs also check for "!".
    Then go to the speaker in the system tray and click it.  Then click mixer.  Make sure the levels there are all the same.
    We might be able to tell something from your event viewer logs
    Please provide us with your Event Viewer administrative logs by following these steps:
    Click Start Menu
    Type eventvwr into Search programs and files (do not hit enter)
    Right click eventvwr.exe and click Run as administrator
    Expand Custom Views
    Click Administrative Events
    Right click Administrative Events
    Save all Events in Custom View As...
    Save them in a folder where you will remember which folder and save as Errors.evtx
    Go to where you saved Errors.evtx
    Right click Errors.evtx -> send to -> compressed (zipped) folder
    Upload the .zip file to skydrive or a file sharing service and put a link to it in your next post
    If you have updated to win 8.1 and you get the error message "the system cannot find the file specified" it is a known problem.  The
    work around is to edit the registry.  If you are not comfortable doing this DONT.  If you are backup the key before you do
    Press Win+"R" and input regedit
    Navigate to:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/Analytic"
    Wanikiya and Dyami--Team Zigzag

  • I have lost the tabs on the top where bookmarks are, and all my saved tabs. The screen is very big and the icons on the bottom are gone as well.

    I noticed the tab on top where it says file edit bookmarks etc was missing. There was a Firefox with a down facing arrow and I clicked on it to see if I could find my bookmark tabs. I don't know what I pushed but the 2 other saved tabs under the first one went away. also the icons on the bottom of the screen also went away. I am very computer illiterate and don't know what I did or if I can even get it back.

    Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).<br />
    If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.<br />
    You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.<br />

  • HT4060 When I charge my ipad on some occasions the plug gets very HOT.  the ipad still charges but slower.????

    When I charge my ipad using the small UPSpower adapter, the adapter gets very HOT on about every third use.  It still charges but more slowly.  Is any one having a similiar problem??  An sugstions as to how to correct it???

    Not staff or owner by a long shot.
    I just know that anecdotally I have seen people reporting issues with their mini's charging. Is there a real issue or not? I don't know. Not a day goes by that a person doesn't post here complaining that their iPad won't charge and it turns out that they're trying to do it via USB or with the iPhone block.
    But while there are a lot of user fixes sometimes it's good to have the pros take a look at things,and at the very least document that there has been an issue.
    the four main reasons an iPad won't charge (beyond being plugged into a USB port)
    Bad cable
    bad outlet
    bad brick
    rule those out and it leaves issue with the iPad.

Maybe you are looking for