The SA release doesn't go by my creation profile

Hi, I have created a release creattion profile and input it onto my sa, I set the daily aggregation 10 days, and weekly aggregation 180 days. In my understanding, if I release now, the first 10 delivery dates should be in form of date, it does. but the problem is, after 10 days, it's still in date form till the 15th days, where could be the wrong?

Hi Mallinath,
Here it is.

Similar Messages

Significance of release creation profile

Hi all,
Can anyone explain with example the use and significance of release creation profiles in outline aggrement
Thnks
Gan

Hi,
Release Creation Profile
Use: -
The creation profile determines:
- Which event triggers the creation of a scheduling agreement release (changes involving the lines of the overall schedule and/or the reaching of the next transmission date)
- How the delivery dates are shown (aggregation and release horizon)
- Whether
Backlogs and Immediate Requirements are determined and shown in the scheduling agreement (SA) release Whether a tolerance check is carried out for SA releases that are created due to changes to the overall delivery schedule in the system
Note: -
The tolerance check is only carried out if lines of the overall schedule for an item have been changed and if you create SA releases using the release creation program (via Scheduling agreement ® Create SA release).
Features: -
A creation profile is defined on a plant-dependent basis and consists of the following areas:
General parameters: -
- Whether - and, if so, under what conditions - an SA release is generated (creation strategy).
- Whether backlogs and immediate requirements are to be determined for the SA release type.
- Whether or not the tolerance check is to be deactivated in the case of change documents created for SA releases with backlogs.
Aggregation horizons: -
- The Release Horizon for which released quantities are shown, and
- The periods for which quantities may be aggregated.
If your creation profile provides for aggregation, quantities and delivery dates set out in the lines of the overall delivery schedule stored in the system for a scheduling agreement are aggregated to form release schedule lines.
If you use a creation profile without aggregation, or work without a creation profile, the schedule lines of the SA release correspond to the schedule lines of the overall delivery schedule for the scheduling agreement for the relevant period.
Creation periodicity: -
- Whether SA releases are to be created on a periodic basis (and, if so, at which frequency).
Each time a scheduling agreement release is created, the system calculates the next creation date. Weekly and monthly releases are always created on a Monday (first workday of the period). The system takes the factory calendar as the basis for calculating the due dates for release creation.
If you wish to create SA releases on a periodic basis, you should choose a creation strategy that includes Next date.
Tolerance profile: -
- Whether tolerances are are to be checked for scheduling agreement releases created as a result of changes to the overall delivery schedule. This allows you to specify that SA releases are only to be created following major changes to the overall delivery schedule.
In the case of SA releases containing backlogs or immediate requirements, the system never checks tolerances.
Activities: -
You process creation profiles in Customizing for Purchasing under Scheduling Agreement ® Maintain Release Creation Profile for Scheduling Agreement with Release Documentation.
You assign a creation profile to a scheduling agreement item in the Additional data.

[Photoshop CC 2014] Click&hold-move-release doesn't work when adding adjustment layer from the layer panel

When selecting a menu item I used to click the left mouse button and hold it down, move the pointer to the desired menu item and release the mouse button. Everything works fine in the mine menu, but there's a problem when adding new adjustment layer from the layer panel: when I release the button nothing happens, I have to press the button again. In previous PS version it worked fine. How can I fix this?

I don't think that is user fixable, meaning you'll have to wait till adobe fixes it with an update.
Photoshop cc 2014
windows does not work
mac does work
Did you already post over here:
[Photoshop CC 2014] Click&hold-move-release doesn't work when adding adjustment layer from the layer panel

LinkButton click doesn't launch URL in the bin-release folder

I have a project "xyz.mxml" in which I use a datagrid. The action script assigns a ItemRenderer of object LinkButtonRenderer
gdColumn.itemRenderer = new ClassFactory(LinkButtonRenderer);
This LinkButtonRenderer.mxml is another file in my project "xyz.mxml"
When I run the application in the Flex builder, it runs fine and on the button click the url opens up. But when I copy all the files out from the "/bin-debug" folder to any other folder, the button click does not work. If I do a "Export Release Build" all the files get created in the "bin-release" folder. But the link button does not work here.
<?xml version="1.0"?>

<mx:VBox xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
       <![CDATA[
           import mx.events.ListEvent;
           import mx.controls.LinkButton;
           import mx.controls.Button;
        import mx.controls.Alert;
        import flash.net.navigateToURL;
        private function handleClick(eventObj:Event):void
            var u:URLRequest;
            u = new URLRequest(data.url.toString());
            navigateToURL(u, "_self");
              ]]>
     </mx:Script>
        <mx:LinkButton id="url" label="{data.label}" click="handleClick(event);" color="blue"/>
</mx:VBox>

For testing the URL im ausing is http://google.com
This buton click operation works when I run it from the Flex Builder Application, by clicking on the "Run" Button, the swf file gets created in the /bin-debug folder.
Once I export it "Export Release build" all the necessary files get created in the /bin-release folder. Here if i open the html file and click on the button nothing happens

Facetime says connecting after you answer the call but doesn't actually connect and both iphone 5s were quick reset-ted and facetime was turnt on and off, any reasons like why or how and how to fix this concerning issue

facetime says connecting after you answer the call but doesn't actually connect and both iphone 5s were quick reset-ted and facetime was turnt on and off, any reasons like why or how and how to fix this concerning issue

Apple has released a document which is reported to address the recent FaceTime issue.
http://support.apple.com/kb/TS5419

Bug: The message list doesn't refresh SOLVED caused by HWA (hardware assist)

I am using the latest Thunderbird from the beta channel, v38. I was seeing this in the stable release channel as well, so I thought I'd try the beta channel to see if it was fixed there, but it was not.
The issue is that the message list doesn't refresh all the time when switching folders. If I an in my Inbox folder, for example, and then select my Junk folder, the message list will not update/refresh, until I drag my mouse over the message list. Then, it will refresh line-by-line as the mouse enters each line.
I am on Windows 7 64-bit, with an i5 processor and 8 GB RAM. Nothing else on my system is running slow. This will happen when Thunderbird is the only app running. I also have a skin applied to my UI. I've tried a few different skins, and this behavior happens with all of them.
A second issue I noticed this morning was that when I received a new email, the entire app seemed to freeze momentarily while the notification for this new email was spawned. As soon as the notification became visible, the app because responsive again. Perhaps a threading issue here.

Hi Matt,
Thanks for the quick reply.
"The last issue is probably your anti virus diving in an scanning the new mail as it is added to a very large mail file. Right click the folder and select properties. What is the size on disk?"
Folder properties on my Inbox folder says:
Number of messages: 1038
Size on disk: 90.9 MB
"With regard to your first problem, I am seeing that on the daily built as well, on an intermitent basis, but not on change of folder, only on dragging the mouse over the existing list."
Yes, it is intermittent for me as well. I just recalled that the last time I saw it was when I changed folders. It may not be limited to that situation.
"What Video card do your have?"
Invidia GeForce GT 740, w/4GB dedicated video memory.
"Please go to the trouble shooting information on the help menu (alt+H) and copy and paste the graphics section to a message here."
Graphics
Adapter Description NVIDIA GeForce GT 740
Vendor ID 0x10de
Device ID 0x0fc8
Adapter RAM 4095
Adapter Drivers nvd3dumx,nvwgf2umx,nvwgf2umx nvd3dum,nvwgf2um,nvwgf2um
Driver Version 9.18.13.4475
Driver Date 11-12-2014
Direct2D Enabled true
DirectWrite Enabled true (6.2.9200.16571)
ClearType Parameters ClearType parameters not found
WebGL Renderer false
GPU Accelerated Windows 1/1 Direct3D 11
AzureCanvasBackend direct2d 1.1
AzureSkiaAccelerated 0
AzureFallbackCanvasBackend cairo
AzureContentBackend direct2d 1.1

I have iPhone 5 and the touch screen doesn't work

I have iphone 5 and the touch screen doesn't work,i want to restart it but my touch screen is not working. I read lots of reviews and support from online all in vain. Please help me fix the problem.
<Re-Titled By Host>

Do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the device to boot back up.
No data is loss doing a reset.

Dispaly of the output message for the not released contract

Hi, all,
Is there a possibility, for buyers (conract creators), to display an output message for the purchasing contract, which is subject to a release procedure, but has not been released yet. Acctually it is possible to do it in ME35K, by indicating the relevant release code and pressing "print preview" after executing the report. But it is not a way out, since buyers are not participating in release procedure and therefore do not have a releasecode.
Thank you.
Vadim.

Hi @Zag_rvn ,
I see by your post by your post that you would like to be able to change the printer to scan to. I would like to help you out today.
Please clarify what you are trying to do.
The Laserjet M251 doesn't have the copy or scanning features available.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Some suggestions on the new release

Hi all,
I have some suggestions on JDev 10.1.3
- WSDL: a BPEL project in JDev 10.1.2 automatically creates a .wsdl file with the same name of the .bpel file, even if a project already has its own wsdl documents (with different names). If you try to delete that wsdl file, JDev creates it again on the next restart.
- Properties and Property Aliases: the designer (GUI) doesn't recognize properties if they aren't declared in "project_name"_Properties.wsdl document. While property aliased must be declared into the wsdl automatically generated by JDev (the one with the same name of the .bpel file). Besides, if aliases refer to another wsdl document, the targetNamespace of that wsdl document is imported in the wsdl file "project_name".wsdl. You can compile every kind of project, but you can't see properties or property aliases in the Structure Toolbar if they aren't in the proper wsdl file.
-Suggestion: why don't you manage the files of a project like Eclipse? In Eclipse you can add, cut, paste, copy, delete files of every kind just with right click on them in the Navigator Toolbar or through drag&drop from/to Windows File-Manager.
I hope these suggestions might be useful for the next release of JDev.
Bye bye

Thanks a lot for your suggestions and feedback. I will pass it to the concerned development group.
Thanks again,
Rakesh

HT1430 The home button doesn't work sometimes. Am I using the wrong pressure?

The home button doesn't response sometimes. Is there any technique? Am I using the wrong pressure? Please help

This may or may not work; no harm trying.
Calibrate the Home button
1. Open a pre-installed app, such as Contacts
2. Press and hold the sleep/wake button until the red slider appears
3. Immediately release the sleep/wake button; press and hold the Home button.
4. Hold until the red slider disappears.

Scrolling bug in the newest release?

I changed my lib to the newest release (455) and suddenly all upwards scrolling stopped working. Scrolling vertically downwards works, but upwards doesn't.
To scroll I use the
_controller.verticalScrollPosition
After I discovered that bug I changed it back to 452 and it worked again.
Is this a bug?

Yes - there was a bug fixed just after 455 was built.
Sorry about that.
Richard

[svn] 3734: Fixing advanced CSS descendant selectors for the alpha release.

Revision: 3734
Author: [email protected]
Date: 2008-10-17 22:13:34 -0700 (Fri, 17 Oct 2008)
Log Message:
Fixing advanced CSS descendant selectors for the alpha release.
- We now check descendant types against any superclass.
- Removed StyleProtoChain.getClassStyleDeclarations()'s recursive "Class" lookup for each superclass of an IStyleClient during the search for type selectors in the hierarchy. This was replaced with a simple describeType-based description (called once per type).
- Added a method to report whether any advanced styles had been registered with the StyleManager to optimize style declaration matching for the default case of simple style declarations.
- Removed advanced selector cache key calculation from StyleProtoChain in favor of the legacy simple type level cache. Future work may be required to cache advanced, display list sensitive style information.
- Fixed the specificity calculation for global selectors.
QE: Yes
Doc: No.
Checkintests: Pass
mxunit styles tests: Pass
select mustella styles tests: Pass
Reviewer: Glenn
Bugs:
SDK-17351 - [Advanced CSS] Descendant selectors don't work for Application
SDK-17361 - [Advanced CSS] If you use descendant and id selectors together, the id selector doesn't work correctly
SDK-17385 - [Advanced CSS] If you use descendant and class selectors together, the class selector doesn't work correctly
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17351
http://bugs.adobe.com/jira/browse/SDK-17361
http://bugs.adobe.com/jira/browse/SDK-17385
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/CSSSelector.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/CSSStyleDeclaration.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/IAdvancedStyleClient.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/IStyleManager3.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/StyleManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/StyleManagerImpl.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/StyleProtoChain.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/NameUtil.as
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StyleDef.vm
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StyleModule.vm
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/gen/ClassDefLib.vm

The camera app doesn't start from lock screen

One of the new features in IOS 5 is the ability to start the camera from teh lock screen. However, my phone doesn't allow this. Was this function built into the final release version of IOS 5?

This feature is not working on my iPad 2. When I double-click the Home button--in lock-screen position-- the iPod features appear at the top of my screen, as they always have. The photostream icon remains in place to the right of my Home screen slide lock. No camera icon comes up anywhere. I have photostream set to off and tried switching it to on, to see if this would make a difference; it does not. I'm very computer and device-literate. The problem isn't in the way I'm double-clicking the Home button. This feature is definitely not working on my iPad 2.

Where can I ge the Android release of Firefox which is equivalent to 32.0.3 on my PC?

The latest version of Firefox on my Win 7 PC is rubbish - websites often don't load, and sometimes when they do I have to left click somewhere on the screen to display the content. I have reinstalled 32.0.3 and it works perfectly.
31.0 works perfectly on my Linux systems.
I have just installed Firefox on my Samsung Galaxy Tab S 8.4 tablet, and the behaviour is the same - websites don't load, and when they do I have to touch the screen to see the content. I have uninstalled Firefox as it's unusable.
I would like to use Firefox on my android tablet, so would like to install whatever release is equivalent to the 32.0.3 PC release.
Where can I download it from?
Thanks,
Kevin
PS
I think Firefox is a great browser, and I have it installed on all my Win7 and Linux systems. However, the latest release is so bad that if it isn't sorted, then I'll move to another browser

Hi,
Thanks for the link. I installed 32.0.3 and it didn't work either. I've also installed the latest Firefox beta, and that doesn't work.
The problem is that websites don't load. The orange bar at the top of the screen starts moving when I enter a URL, then stops. I get a Server Not Found message every time.
Both the Samsung and Chrome browsers work perfectly. The internet connection is good.
I have a brand new Samsung Galaxy Tab S 8.4 - model SM-T700. Android V4.4.2, Kernel V3.4.39-2254254. There are no Firefox add-ons.
I've also just had exactly the same results with an identical 'fresh out of the box' Galaxy Tab S 8.4
I'd really like to sort this out, so would appreciate any assistance you can offer.
Also, please let me know if I can be of assistance by providing log files etc
Regards
Kevin
''jayelbe [[#answer-671998|said]]''
<blockquote>
Hi Kevin,
Here's a link to download Firefox 32.0.3. Just click the right locale for you (ie British English is en-GB, American English is en-US, etc) and then download the apk file.
http://download.cdn.mozilla.net/pub/mozilla.org/mobile/releases/32.0.3/android/
But it's a good idea to use the most up-to-date version if you can, as old versions won't have the latest security updates, etc.
If you have a moment, could you help us try to get to the bottom of your issues?
Do you have any extensions or plugins installed in Firefox? Sometimes Firefox's bad behaviour can be caused by an out-of-date extension or plugin.
Thanks
</blockquote>

Upgraded to iOS7 on my iPad Mini and now the mute button doesn't work

I upgraded to iOS7 on my WiFi only iPad Mini and now the mute button doesn't work. It toggles between Ringer on and off and of course, there is no ringer on my WiFi iPad. Same thing happens in the control panel when I switch functions and try to mute the sound there. It used to toggle between Volume on and off. Anyone know how to fix this?

Try This...
Close All Open Apps... Sigh Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

The SA release doesn't go by my creation profile

Similar Messages

Maybe you are looking for