The sale orders even though continue generating needs are concluded

Dear Community:
I have a problem with some sales orders in the status of the document flow appears like a completed in the sales order, delivery and billlig, but two schedule lines continue generated needs to Production even the sales document, appears completed.
Thanks a lot if you please give me a hand with this trouble.
Edited by: Victor Jaime Cervantes Mendoza on Feb 11, 2010 8:50 PM

Ok,
The problem consist in this;
First the planning of this company works with the scheme make to order
Second: The issue that we have it is some sales orders that his status is completed in the transaction MD04 continous generate needs planned orders for two schedule lines, this isn´t ok because if the sales order it is over it would not have to generate needs to planning.
If you have some else information, please adviseme
Thanks in advance.

Similar Messages

In the Production Order, Sales Quotation is displayed not the Sales Order

Hello to All,
I need a kind help from you.
My scenario is as follows
There is a Configurable Material (Finished Product)
Sales quotation (VA21/2/3) were made for this material.
Sales Order (VA01/2/3) with reference from the Sales Quotation were made for this same material.
Now when I run the MRP (MD02) for this material, Planned Orders were created.
Planned orders were converted to the Production Order.
In the Production Order (say in Display mode), under the 'General' tab, there is a segment called 'Sales order'. In this segment, the sales order is being displayed if the Production Order is created for a sales order (MTO scenario).
But, in my case, the Sales Quotation number is being displayed instead of the Sales order.
My Issue which need your answers:
Is it a standard SAP scenario?? I mean, if the production order is created for a sales order and again if the sales order is created earlier with reference to a sales quotation, then in the production order, the Sales quotation is displayed. Is it a standard?? Or it is showing wrongly? I mean, is it like that, always the sales order should be displayed in the Production order and not the sales quotation??
Please suggest so that I can overcome this problem, if at all it is a problem.
Some More Inputs (For your analysis/research):
1. After the MRP run of the material the Planned Order is created. I have checked the planned order, and found tha the assignment of sales document (in this case Quotation) is done in the Planned order itslef. It is visible wthin the "Assigmnet" tab of the Planned Order.
2. For the analysis purpose, I created one stand-alone Sales Order for the same material. I mean, without reference from any Sales Quotation. Then, when I run the MRP (md02), the Planned Order and then production order were created normally, with reference to the Sales order. This just for your kind information.
3. I have checked the pegged requirement of the Production order in the MD04. It is showing the Sales order itself. But, if I see the production order (CO02/O03), it shows sales quotation.
User Requirement:
Evenif, the sales order is created with reference to a Sales Quotation, after MRP run, in the Planned and thereby subsequent production order, the Sales Order should display and not the Sales quotation.
Please suggest.
Thanks and Regards,
Supriyo

Hi
Since your scenario is configurable material, the system takes the reference of sales quotation only. Because the in case of configurable materials the sales quotation is the base and based on the sales quotation the sales order is created and subsequent production order.
This is std SAP and for configurable materials the sales quotation is deciding factor
Krishna

Finding of fixed vendor while creation of the sales order

i want to find the fixed vendor (FLIEF) from EBAN ,before saving the sales order,
for that i need to pass BANFN( purchase request no) BNFPO(purchase request item no), into EBAN ,which i got from VBEP table .
i used user-exit (userexit_save_document) which is in MV45AFZZ (include programming). i'm getting BANFN and BNFPO from XVBEP and there is no data in EBAN.help me any other method is there to find these values. like any user_exit or bapi or badi

Hi Krishna Murali,
do u want to make mandatory fixed vendor in sales order ,if yes
u can fix by using the incompletion procedure.
hope it helps, if u have have any query , come to me
Thanks&Regards
Venkat.Dhanemkula

Enhance Event LIKP to also pass the Sales Order during Change & Delete

Hi,
Event/object LIKP is triggered when creating, changing or deleting a Delivery.
We have workflow links in place, which call custom FM's when creating or changing the delivery. These FM's are able to populate tables during such events.
However, after a delivery is deleted, there is no way to link it back to the Sales Order. Entries in table VBFA are deleted with the delivery deletion.
As such, we'd like to enhance event/object LIKP to also store/pass the Sales Order to our custom FM.
How do I enhance LIKP to do this? I know it's done in SW01 and I might need a new container, but I have no idea on how to do this. Please suggest.

Bump ...

How to populate the billing plan tab for the sales order inbound

Hi Team,
I am new to IDOCS, I have a requirement like IDOC extension of the sales order inbound.
Can anyone explain in brief how can i add billing plan tab in the IDOC extension for the Sales order inbound.
Thanks,
Barathi

U need to use the table vbfa or fololow thw link
[http://www.erpgenie.com/sap-functional/sd/read-sales-document-flow-using-a-function-module]

How PIR's are consumed by the customer requirements even though the sales orders are blocked?

Dear experts,
I am using strategy 40 for material A with Backward/Forward consumption of 60 days backward and 60 days forward.
My PIR is as follows :-
Material Month #1 Month #2 Month #3 Month #4 Month #5 ....
material A 100 100 100 100 100 ....
I created a Sales Order for material A with the quantity of 600 in Day 4 of Month #1.
After MRP run, planned order conversion and production order has been completed.
Month #1, Month #2 and Month #3 PIR's are consumed even though we made the setting in Such a way that the sales orders should just display but not planned . and the sales orders are into the blocked requirements list in the result of /n/afs/MD02.
1)but why it is consuming the PIRS?
2)is there any affect of backward and forward consumption on this?
Thanks in advance.
Regards
Bhargavi Desai

Hi,
Normally it is recommended that, not to delete PIR's one by one or remove quantity from previous periods/ requirement manually. If the PIR's of previous month is not consumed it is normally a feedback to sales people to do a analysis at their end.
In PP point of view, normally a re-organization run is carried out by MD74, MD75 or MD76. The same can be done by scheduling batch job to run on month ends basis w.r.t. period you specify.
Regards,
Narresh

We are using EBS 12.1.3. When we input a sales order from a customer we input the sales order and specify the date the customer wants it. This isn't always the date that we intend on manufacturing it though. I need to put a customer due date in, but be

We are using EBS 12.1.3. When we input a sales order from a customer we input the sales order and specify the date the customer wants it. This isn't always the date that we intend on manufacturing it though. I need to put a customer due date in, but be able to put a date in another field that MRP can read in the event we choose to manufacture based on another date. For example, early.
Any help would be appreciated.

What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Credit exposure updating even when the sales order is blocked

Hi,
We are using FSCM credit management. We observed that the credit exposure is updated even when the sales order is blocked. When we investigated it is found out that SD has removed the requirement 101 in the subsequent functions. The reason is they want the confirmed quantity to be updated even though the order is blocked. This will allow the Material Planning to go ahead and purchase the goods. Is there a way around it where we can have MM see the confirmed quantity in the order and it will not updated the credit exposure?
Thanks and Regards
Madhu Vutukuri

Hi Sravan,
Please let us know, whether the document is really getting reflected in the blocked documents list for a particular kind of block and you are releasing that particular block in the specified area as we have different areas for releasing blocks. Chances are that in the mean time, the concerned block might have been removed in the system and not updated as it might have been. It will be of great help, if you can provide us with the screenshots of the process followed.
Regards,
Aman

Line item is falling into back order even though the stock is available

Hi Gurus,
I have a sales order with a single line item which fell into back order even though there is material stock available in the plant and thereby is not dropping any delivery note.
Please suggest me what could be the reason behind this issue and let me know how can i figure it out of what is causing this issue.
FYI, it is happening for multiple sales order but not for all the orders.
Please help.
Regards,
Praveen Kambala.

Hi,
You should check if there are pending requirements in MD04 coming from another sales orders or STO. If your sales order is not available in MD04, either you have daily requirements or the order is probably blocked by credit check.
If you use credit check control and the credit check fails, the quantity will not be confirmed until the sales order is released in VKM4.
If the above does not help, please provide more details about the issue (schedule line type, MRP type etc), as it is stated quite generic now.
Regards,
Marcin

Need Profit centre field as mandatory field in the sales order

Dear All,
Normally Profit center data maintained in the material master, same data will get coipied to the sales order while creating sales order in VA01 transaction.
My requirement is if profit center data is not maintained/available in the sales order system should give the error message
For this I need Profit center field as mandatory field in the sales order(VA01).
Can you please give possibilities ASAP.
Give the SHD0 maintenance step by step.
Regards,
Murali.

Hi Murali
I beleive that you are talking about the Profit centre field not maintined in sales order hence not picked in delivery and billing and there is an FI posting error (GL account error) because of that
Profit centre is maintained in MMR and the same flows thro the sales cycle and i am quite sure if maintained in MMR it will be picked automatically and no need to make it mandatory in sales order( as the purpose is already solved)
But there is no standard option in SAP like (even if Account assignment category of the material is not maintained in MMR it can be given in VF02 and the document can be released for accounting) to give the Profit centre in the billing and release the same
Profit centre field field is picked from masters and flows in the entire flow and that field is greyed out (like no option of inserting it inbetween)
As told by others incompletion log in sales doc type will take care for future orders and for the already created orders the standard option is cancel billing, reverse delivery and open the sales order and give Profit centre field and process it (if only a few orders are there)
But if the already created orders are many then from the FI Area you need to go for development ( we also faced this issue as profit center not maintained in MMRs and hence accounting got hit and there were tons of billing docs and our FI consultant made some development to open it and solve it) FI consultant should be able to do this for already created orders
Instead of making Profit centre field as mandatory field in the sales order better make it a mandatory entry in MMR
Regards
Raja

Need IDOC and segment for mappping the sales order number

Hi,
we need the IDOC name and segment for mapping the sales order number created by oracle in sap for transaction VA01.
Whether the sales order number created by Oracle can be used to create the sales order in sap using the idoc ACC_SALES_ORDER01?
. If we can do,then what is the segment and field for the sales order number in the idoc ?
Please reply asap it's very urgent
Thanks
Edited by: suresh kumar nandhagopal on May 16, 2008 12:07 PM

Hi,
IDOC for sales order is ORDERS05. Segment E1EDKA1, for field go to SE11 and enter E1EDKA1 to find field for sales order.
Cheers.
...Reward if useful.

Tree OOPS ALV - Need to display header & items of the sales order in oops

HI,
I need to display some of the header fields of the sales order & items in the oops alv, could you please let me know how to achieve this. I know FM - 'REUSE_ALV_HIERSEQ_LIST_DISPLAY' but how to achieve this through oops alv.
Thanks

it is not possible with that function in OO .
you can try with class cl_salv_hierseq_table
Just check this Rich's article
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f03986-046c-2910-a5aa-e5364e96ea2c
if you don't want that then you may have to use ALV tree.

I need to add fields in additional fields B the sales order line item

i need to add fields in additional fields B beside the field (icon_val_quantity_ structure) in the sales order line item, How to achicve this? please help me..

Please fined the below solution for achieving your requirement.
1. Add new filed "B" in table VBAP.
a) T.code SE11 --> Enter structure name VBAP --> display
b) Goto --> Append Structure --> Enter Structure name and new field "B"
2. request your basis team and take the access key for modification of stabdard program SAPMV45A & Screen: 8459
   a) After receiving access key for standard program then got o SE51 --> enter program name SAPMV45A & Screen: 8459
   b) click change Button
   c) click layout button
   d) add new field "B" below of the screen (F6 -> enter table name : VBAP --> get from dictionary --> selet new field and past in screen )
3) write below code in flow logic
PROCESS BEFORE OUTPUT.
                           Verarbeitung vor der Ausgabe
MODULE ZZPB_INITIALIZE_8459.
MODULE ZZPB_OUTPUT_8459.
PROCESS AFTER INPUT.
CHAIN.
    FIELD VBAP-New field name "B".
    FIELD ZVC_SALES_EXPORT-ZZAPLHENKO.
ENDCHAIN.
MODULE ZZPA_OUTPUT_8459.
4. functin Module code
module ZZPB_OUTPUT_8459 output.
Data: l_v_actve type ale_active,
        l_v_ttyp type c.
Data: l_v_tragr type tragr.
l_v_ttyp = t180-trtyp.
if l_v_actve is initial.
    l_v_ttyp = 'A'.
endif.
LOOP AT SCREEN.
    CASE l_v_ttyp.
      WHEN 'A' OR 'C'.
        SCREEN-INPUT = 0.
    ENDCASE.
ENDLOOP.

Program need to change the milestone in the sales order

Hello,
I have a scenario to change the sales order milestone in the billing plan tab.
Since the user doesn't want to do this manually. So they need a program to upload the milestone for the respective sales order.
Kindly let me know is there any function module or any program available.
Best Regards,
Vijay
Edited by: Vijayakumar Sundaram on Jul 12, 2010 4:03 PM

HI Vijay,
Please check the below FM.
CN2M_ACT_MLST_CHANGE
CN2M_MLST_CHANGE

Trying to open Premiere elements 12 for the first time even though I had it loaded for a while. It gives me a message that I need to be connected to the internet (which I am) or that my clock is off (it is correct). Any suggestions?

Trying to open Premiere elements 12 for the first time even though I had it loaded for a while. It gives me a message that I need to be connected to the internet (which I am) or that my clock is off (it is correct). Any suggestions?

First we need to check , whether the LAN settings is set to detect settings Automatically or not.
Follow below steps .
1)Open Control Panel and then click on the option "Network and Internet" .
2)Click on Internet options, click on 'Connections' tab.
3)In the 'Connections' tab, select 'LAN' settings, you will be able to view the Local area network settings box.
4)Check the box-"Automatically Detect Settings" and then "uncheck" all the other check boxes like 'Use automatic configuration script', 'Use a proxy server' , Bypass proxy server' ,then click on ok button .
5)Click on "LAN settings" button again , make sure "Automatically Detect Settings" is the only option selected, keep the LAN properties window open.
Then launch Premiere Elements 12 and try to sign in.
If the settings were already set like that or you face same issue after signing in , let me know

The sale orders even though continue generating needs are concluded

Similar Messages

Maybe you are looking for