The sales unit is not allowed+STO plant to plant

Dear Friends,
In plant to plant stock transfer,while creating delivery in VL04,system is giving the following message-
'The sales unit is not allowed for the material in item 000010'
I have not assigned any sales unit to the material still it is giving this error.
Please advice

Have a look at the following note:-
Note 140551 - VL384 Stock transport order and batch selection
G. Lakshmipathi

Similar Messages

Error in CNS0 :Sales unit is not valid for the item

Dear Team ,
we are using assembly process ,after creation of project from sales order ,requirments are pass to production planning (PP), Asign the bom to activites then we are going to delivery through project (cns0) at the time system shows error" sales unit is not valid for the item" we check the options in material master .please help me on this issue.
Thanks &Regards
R.B.RAO

Have a look at the following note:-
Note 140551 - VL384 Stock transport order and batch selection
G. Lakshmipathi

Sales order does not allow make-to-order production

Dear Friends,
I am trying to do do planned order for sales order in MD50 it was showing the error message as
"Sales order does not allow make-to-order production"
Can any one solve this
Shakthi

Hi Shakthi,
It is also possible to set the priority for Requirement Type determination like
0 Material master strategy, then item category and MRP type
1 Item Category and MRP Type
2 as 1, with check for allowed requirement type.
The transaction for this is same as "Requirement Type Determination :
Sales and Distribution --> Basic Functions --> Availability Check and Transfer of Requirements --> Transfer of Requirements --> Determination Of Requirement Types Using Transaction
Look for "Source".
In this transaction, Please, check "Requirements".
Please, make sure of the following 2 things :
1. If you do not set an indicator for maintaining the requirements class: Transfer of requirements is not carried out, irrespective of the specification you make at schedule line level for the transaction.
So it is necessary to mantain the setting first at the Requirements Class. As mentioned in my earlier posts, the requirement class for the material can be found out from Planning Strategy / MRP3 view --> Main strategy (defined in the strategy group) --> Requirement Class for Customer Requirements.
The IMG path for "Define Strategy" is Production --> Production Planning --> Demand Management --> Planned Independent Requirements --> Planning Strategy --> Define Strategy.
2. Once the "Requirements" indicator is set in Requirement Class, the requirements indicator at the Schedule Line decides whether or not you require transfer of requirments for the relevant transaction.
I hope this should solve your problem.
Regards,
Sandeep

Error message MH 175 "The listing end is not allowed to be in the past"

Hi,
While I try to execute listing in the new article creation using particular disctribution chain, i.e. with reference to a Sales Org and distribution channel, the error message MH 175, 'The listing end is not allowed to be in the past' popped up. Can you please help me on what could be the cause for this error to be displayed.
thank you
regards
prahlad

Hi,
Go to mm42.. enter the article number and distribution chain and then select the Listing View.... Please check the "Listed to" and "for Sale till" date is in past. if so change the date to future and try agian.
Regards
GK

Message No BS027 - Create Sales Document is not Allowed

Hi All
I have created a status profile zfm00001 copying the status profile FM000001.
I have created a new user status as OPEN in which I have allowed all the transactions including create sales document.
All the possible transactions in Funds Management object type is set as allowed.
After I release these status for " * " FC & " * " CI for 2011, All other transactions are working properly.
I am getting an error during Sales Order creation as " Message No BS027 - Create Sales Document is not Allowed", even though I have set the status for "Create sales document" as allowed. I am going wrong somewhere..Please help
Rgds

Hi,
Please, maintain in BS12, VA01-relevant business transactions for object type FS0.
Regards,
Eli

Sales unit F2 not found

Dear all,
I can't create SO with sales unit(SU) F2, because in list sales unit (SU) not found. but in table T006 the F2 is there. we have error message "Sales unit F2 is not defined for item 000010"
Would you like help me please
thanks and regrads
imron

Dear Avi Kamu,
i have finish to add F2 in path "img-sap netweaver- general settings- check units of measure" before i create SO,
any other solution ?
thanks
imron

Airport Extreme unit will not allow Windows devices to access WiFi

For the last 10 or so days, my Airport Extreme unit will not allow Windows based devices to access WiFi (ASUS laptop and Nokia Windows Phone). Our Apple devices have no issues (MacBook Pro, iPad, iPhone, iPod). Settings were not changed but there may have been a program update? Have tried resetting without success. Today I tried to bypass the problem by creating guest network access - my MacBook Pro can access the guest network, but again, the Windows-based devices can't log in.
Airport packaging stipulates that this product will service both Apple and PC products. I'm stumped and this is a bit of an issue as my wife's PC has been cut off from the Web as well as my Windows phone. This Airport unit is fairly recent having been bought August or September of last year - so a recent purchase, but to get Apple assistance it appears I'd need to purchase service ticket... (Am using Mountain Lion 10.8.4 and Extreme 5th Gen.)
Is there an easy solution?

No software updates available.
Found a Network Options checkbox which blocked IPv6 connections in Airport Utility. Unchecked it, that didn't change anything, so I've returned it to its original setting. But under Internet Options, Airport is set to allow IPv6 connections. Strange that this unit would have settings that appear to contradict each other.
There was an access control panel - but to grant control here, I'd need an Apple address which my Mac would have but which the Windows devices would not, so that setting couldn't be used to address this problem.
So, no solution to the issue that I can see.

I have set up our school ipads to be supervised by Apple Configurator and am using VPP to buy apps. I now find the supervised ipads do not allow the pupils to download photos or movies etc. Any suggestions would be great please.

I have set up our school ipads to be supervised by Apple Configurator and am using VPP to buy apps. I did this initially as our school internet connection was stopping us from being able to update the IOS and our County was offering a managed system, Lightspeed, which took control of every device in school which proved very expensive. I now find the supervised ipads do not allow the pupils to download photos or movies etc. As we frequently use the ipads as cameras this is causing us a problem. We have a school imac that I use to keep the devices updated with Apple Configurator (not connected to our network), and this doesn't seem to offer any solution to download them either. I was told there was a setting in Apple Configurator to allow other computers to download from supervised devices, but I can't see it anywhere. I am very new to this so any advice or help would be greatly appreciated please.

I assume you are wanting to take the photos and movies off the iPads?
Connect the iPad to a Apple computer. Open "Image Capture". Any photos or video can me imported to the desktop or other location on your computer.
I had this same problem last year and as we have no wifi I asked lots of people at Apple what I could do - no one provided this answer (a little unbelievable!). If you have wifi using something like dropbox would be an easier solution.
Hope this helps

The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?

I have recently switched from a PC to a MacBook Pro.
I have a large number of documents and photographs on a multiterrabite external drive, backed up on a second multiterrabite external drive.
Both external drives are formatted for MacIntosh. This has been verified by agents at an Apple store and also at Best Buy in two different cities.
This is the problem:
The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
Thanks!
Roderick Guerry
[email protected]

Roderick Guerry wrote:
The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
No, this is a philosophical difference between Apple and Microsoft. Apple believes that it's dangerous to cut a file in case the user never pastes it; in that case the file is lost. Microsoft seems to not have this problem (if I remember Windows correctly) because they don't delete the originating file if it's cut but never pasted.
Even though Macs have a lot of keyboard shortcuts, philosophically Macs have traditionally been mouse-first. This applies to file copy operations. In your case, what a Mac user would do is open the source window, open the destination window (on your second drive), and then Command-drag the selected files from the source to destination window. This is because a normal drag would leave the originals behind, while adding the Command modifier key tells OS X that this is a Move, not a Copy, so don't leave the originals behind.
(In addition there are different rules for drag-copying within the same volume or between different volumes. If you drag between two folders on the same volume, the files are moved. If you drag between different volumes, the files are copied unless you hold down Command to delete the copies on the source volume.)
Roderick Guerry wrote:
Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
Two problems in this case. First, batch file renaming is not built into OS X unless you build something with Automator. However, there are many utilities that can do batch file renaming which you can find at macupdate.com or on the App Store. Since I work with media I often batch rename using one of the media managers I have lying around like Media Pro or Adobe Bridge (comes with Photoshop).
iPhoto is a database front end designed to shield the file system from the consumer and let them concentrate on creativity and sharing. As such it is often a poor choice for managing files directly. When you "transferred the photographs" chances are you moved the originals, not the ones iPhoto edited which are stored in a hidden folder.
Roderick Guerry wrote:
I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
There will not be a way to do it exactly like Windows. As described above, there are ways to do it "the Mac way." If it is possible to remove judgment on which way is "better" you might find the Mac way to be acceptable, but of course sometimes we simply prefer what we're used to.

ERROR MESSAGE : display of the query spec is not allowed

Hi all,
I have many queries built under a multiprovider. The problem is if i try to chane a query it is not allowing me to do it. Even for a query which i built it is not allowing. It is displaying an error message 'display of the query spec is not allowed'.
Can anyone help me in understanding this issue?
Thanks,
Raj.

Have you check your authorizaiton trace with ST01?
You need authorization for this query in auth obj S_RS_COMP or S_RS_COMP1

How do you copy one page from a document into a new document? The new pages does not allow you to copy a thumbnail

In the old pages you could simply copy the thumbnail and past a certain page into a different document.
The new pages does not allow you to do this.

That and 95 other things it does not let you do.
Pages '09 should still be in your Applications/iWork folder, use that instead.
Peter

I open a new webpage in a new tab. I then go to a link and the back button does not allow me to go back to the original webpage. Any suggestions?

I open a new webpage in a new tab. I then go to a link and the back button does not allow me to go back to the original webpage. Any suggestions?

I don't think you understood the question. I am having the exact same issue. I open a link in a new tab or window, for example: https://addons.mozilla.org/firefox/addon/backforedrop/
When the new tab opens, I click on "reviews" to open the link: https://addons.mozilla.org/en-US/firefox/addon/backforedrop/#reviews in the existing tab because I want to see the reviews for this feature. After I read the reviews, I want to go back to the main link, but the back button on my browser is greyed out, as though I was never even on the previous page. So my options are 1) Open every link I ever click on in a new tab or window, or 2) Hope the website is user friendly and attempt to navigate back to the previous page using links inserted on the current page.
You never realize how frustrating not having back button is until it happens.

SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.

Hi there,
Does someone know in SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.
Thanks,

Hi，
Per my knowledge,
it is by design that the data type multiple lines of text can only use “contains” and “begins with” operators.
You can also filter the list view using SharePoint Designer,
Open your list AllItem.aspx page in SPD ->click “Filter” > in “Field Name” select your multipe line of text field, in “Comparison” will displayed four choices.
Best Regards，
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

When making a new playlist, the screen layout has changed, the playlist header is now on the left instead of the right, this does not allow me to drag the songs onto the playlist, how do I reset?

When Making a new play list, the play list was on the right of the screen and this allowed you to drag your music onto the playlist, my setup has changed to the left of the screen which does not allow you to drag your music across, how do I reset?

In the top corner of iTunes is a small icon with a down arrow, click on that and choose 'show menu bar'.
Then on the view menu which now appears choose 'show sidebar'

When I try to download apps, a message appears saying that to move forward I have to agree to the new terms of the contract, but does not allow me to agree and not low Apps. Someone can explain what is happening?? thank you

When I try to download apps, a message appears saying that to move forward I have to agree to the new terms of the contract, but does not allow me to agree and not low Apps. Someone can explain what is happening?? thank you

Delete some stuff to make room on the device.
iCloud is not local storage and has nothing to do with your situation.

The sales unit is not allowed+STO plant to plant

Similar Messages

Maybe you are looking for