The same recovered files in the trash, every morning

I'm accustomed to Mac OS X's practice of placing potentially important files in a "Recovered Files" folder in the Trash after a reboot if, say, an application crashes. But I'm getting annoyed by my computer's habit of placing a set of files in such a folder every single time it's shut down. The files all look like remnants of an Asian-language font set. Here are the most recent names:
#Junggothic.dfontATS_493169727169
#Junggothic.dfontATS_17722080525333
#Junggothic.dfontATS_3922-125658874
#Shinmyoungjo.dfontATS_493169492902
#Shinmyoungjo.dfontATS_17722080452720
#Shinmyoungjo.dfontATS_3922-126354157
#Taegraphic.dfontATS_493168710633
#Taegraphic.dfontATS_17722080055722
#Taegraphic.dfontATS_3922-128251752
I do not use any Asian-language input methods whatsoever, nor do I visit Asian-language websites with any regularity. But I can confirm that all three of these fonts:
#Junggothic.dfont
#Shinmyoungjo.dfont
#Taegraphic.dfont
... are present in ~/Library/Fonts. Does anyone else also have them, and if so do you know what program may have installed them? Is the hash symbol supposed to be present in the name? I'm tempted just to trash them, but I'd prefer not to if they're regularly used by websites, etc.
Thanks!

Since they aren't installed by OS X or MS Office, then they were installed by some third-party software you installed.
The files in the Trash are actually cache files generated by the ATS = means either Apple or Adobe Type System. Probably the former. Most likely these result from the nightly cleanup scripts tossing unneeded cache files from the Type System.
If you don't use these fonts then track them down and remove them. If they aren't in one of the three Fonts folders normally used, then they could be Adobe fonts stored elsewhere on your computer. Use a utility like Easy Find - VersionTracker or MacUpdate - to search for them.

Similar Messages

  • I have been working on the same numbers file for the past few weeks.  The last time I opened it was 1 week ago.  Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

    I have been working on the same numbers file for the past few weeks.  The last time I opened it was 1 week ago.  Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing. 

    Hi Tracie,
    I upgraded to Maverick OS X 10.9.5, numbers spreadsheet is saved. Upon re-opening, it appears to be frozen, a warning "file is invalid as index.xml file is missing". I checked, and the file is not "locked". This appears to occur only with using the new numbers app. When I open previous spreadsheets from old iWorks, no such problem occurs.
    How did you resolve your problem?
    Would appreciate any help here.
    Thanks,
    Deehay

  • Recover files from the iCloud, recover files from the iCloud

    Hello, a couple of weeks ago my macbook pro was stolen, now I have a new one and I am trying to recover my files from the iCloud but I can´t. Can someone please tell me how to do it? Thanks

    There's no way that you're going to recover all of your files from iCloud. Depending on what you stored on iCloud, you can log into your account via the web to see what's there (contacts, TextEdit and Pages docs, mail, notes - whatever you had it set up for).
    But what's stored on iCloud is limited - it's only 5GB after all. You're just going to be able to get to what you had stored there.
    Clinton

  • Recovered files in the trash.  How do I put them back to their original place so that they do not keep being recovered very time I open my Mac?

    I keep getting the same recovered files in the trash.  How do I put them back to their original place so that they do not keep being recovered very time I open my Mac?

    The recovered files are temporary files used by Mac OS X applications. Usually temporary files are deleted by an application when it no longer needs them. If an application quits unexpectedly, the temporary files may not be deleted by the application. When you restart your computer, Mac OS X moves these temporary files to the Trash.
    You can retrieve useful files by dragging them out of the Trash. In most cases, however, the temporary files are not important and it is safe to empty your Trash. Check with the manufacturer of the application if you are not sure.

  • Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file bu

    Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file but not working. What is the matter and how can I deal with it?

    I am trying it on Adobe Acrobat Reader 9.2.1. Tried to fix Hex code, and also tried 'edit-preference-trust manager'. I focusing on Adobe registries but still couldn't fix the problem.

  • Why are there recovered files in the trash

    Since upgrading to Leopard I have found that there is very often recovered files in the Trash.
    Nothing has crashed, but I find a folder called 'Recovered Files' which contains Quark Xpress file, or other items. Just today, I found the PDF log (created by Quark), plus a duplicate of this file in the trash. Neither of which will delete.
    Then I found that Quark was still open. Quitting allowed the files to delete, but they did not disappear from showing in the trash, they just weren't physically there.
    Anyone help?

    You're right!!
    I looked for an answer and I found it on Microsoft's site:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macstart/i-keep-getti ng-an-empty-file-in-trash-at-startup/e5760e59-9e5f-4a0a-8766-dac6a73af148
    1. Open application Office error reporting, the application is located in this folder
          /Library/Application Support/Microsoft/MERP2.0
    2. Go in preferences
    3. Uncheck enable office error reporting
    That did it... Thank you!

  • Should I delete the "Recovered files" in my trash?

    Occasionally, 1 or more folders will be in my trash labeled "Recovered files". The contents of these folders are random things on my computer. Currently, it is an text bullet from Pages. I checked in Pages to see if it was still in the program's bullet list. It was still there, so I'm thinking that I can delete it from my trash.
    This kind of thing happens with other stuff too, and I want to know if I can always delete them from my trash.

    Hi,
    Yes, you can delete those files.
    *A folder called Recovered Files appears in my Trash*
    One or more Recovered Files folder may appear in your Trash after restarting your computer. The recovered files are temporary files used by Mac OS X applications. Usually temporary files are deleted by an application when it no longer needs them. If an application quits unexpectedly, the temporary files may not get deleted by the application. When you restart your computer, Mac OS X moves these temporary files to the Trash.
    You can retrieve useful files by dragging them out of the Trash. In most cases, however, the temporary files are not important and it is safe to empty your Trash.
    Carolyn

  • HT202020 Using a SDHC card adapter I can import directly on my iPad2 videos (.mov) taken with a Panasonic DMC-ZS3. The same video files (same file format) imported in Aperture 3.3 cannot be synchronized with iPad. Is Aperture causing the problem?

    Using a SDHC card adapter I can import directly on my iPad2 videos (.mov) taken with a Panasonic DMC-ZS3. The same video files (same file format) imported in Aperture 3.3 cannot be synchronized with iPad. Is Aperture causing the problem?

    Oh, baby! This bad boy flies!! Here's what to expect:
    I had 40,000 images in Aperture 3 and it was dog slow at everything. I installed 3.1 update today. It took 5 minutes to update the database and then behaved marginally better than before at ASIC library navigation. I was disappointed.
    Then I QUIT the app. It took a couple of hours to "update files for sharing" with a counter that went to 110,000 images. So it must have updated every thumbnail and variation of preview. Turned it back on , and BAM. Came up fully in seconds. Paused for 10 seconds ten everything was lickrty split. For the first time ever, I can use the Projects view with all 791 projects and scroll quickly. I even put it in photos modevand whipped thru all 49,000 images!
    Haven't done anybprocessing yet, but i'm liking it!!
    Jim

  • Export Limits for Multiple Sequences in the Same Sequence File for TS3.0

    Hi,
    I am using TestStand 3.0 to a test application. Because we want to have our limits in a csv-file I have tried to use the Import/Export tools in TS. But this application only supports to export limits for the selected sequence (e.g. main, or subseq1) at a time. This makes it a pretty hard job to export limits from 30 test sequences. What I need is a possibility to export my limits from �all sequences� in my seq-file.
    I have found an article on NI Dev. Zone about �Export Limits for Multiple Sequences in the Same Sequence File (TestStand 1.0.x)�.
    http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3D9CB56A4E034080020E74861&p_node=DZ52236&p_submitted=N&p_rank=&p_answer=&p_sourc
    e=External
    I have tried to use this code but because it�s for TS 1.0.2 the limits from my multi num test step and my custom steptypes isn�t exported. So that doesn�t fulfill my needs.
    Is there an updated version with �all sequences� added to TS 3.0? Is there other good solutions to my problem out there?
    Best Regards,
    Morten Pedersen
    CIM Industrial Systems A/S
    Denmark

    Hi David Mc,
    Thanks for your reply. I have already considered this solution because the source code is added in the folder described in your reply. But that is not a good solution. It will cost me a lot of time to establish the toolchain, reverse engineer the source code, make the implementations and build a new dll (most off these is already knowledge by NI). And when NI make future releases of TestStand I have some merge work to do every time NI have made some changes in the files I have changed.
    But as I write above: I have hoped that NI already has/or could made a solution like the one to 1.0.2 (see link in root) to me. And then they could include it in the next version.
    I don't think I am the only one in the TestStand world that ne
    ed this feature.
    Best regards,
    Morten Pedersen
    CIM Industrial Systems A/S
    Denmark

  • Fixing duplicate database entries for the same audio file

    My iTunes Media folder is stored on a network accessible storage server. Since upgrading to 11.1.x, my computer seems to be duplicating database entries for the same audio files - for some albums, I have 4 entries for every song, each one pointing to the exact same file. The only difference between entries is rating info and play counts, which are specific to a particular entry (I think). Has anyone else seen this behavior? Is there an obvious way to stop this from happening? I can delete and rebuild the database from media files, but that starts getting old if I have to do it every week or so. Is there a script to delete duplicate database entries? (I found a VB script on the iTunes for Windows community, but the offending machine is a Mac).
    Thank you for any assistance!
    K

      Select the photo stack under the People tab and click the rename icon (bottom left)

  • Hi,  I backed up my ipad and iphone on the same computer, will it be shown on the same folder or different? Mine is window 7, try to find the back up file follow the step that apple provided, it shown only iphone instead of ipad. Pls help.

    I backed up my ipad and iphone on the same computer, will it be shown on the same folder or different? Mine is window 7, try to find the back up file follow the step that apple provided, it shown only iphone instead of ipad. Pls help.

    What do you see under Edit > Preferences > Devices?
    tt2

  • Using The Same Audio Files On Multiple Platforms

    When I import new audio into logic - often it will say that is creating wave forms for the display.
    Q: I notice that the audio files on disk do not show an altered modified date - so where are these wave form displays being saved - on the audio file or inside the logic song?
    Q: I am interested in possibly going back and forth between logic and Pro tools LE - and at different times using the same audio files for both platforms. Assuming I am not doing any destructive editing - is it OK to use the same set of files for both platforms - or do I need to make duplicates (I'd rather not)? Also, how does this wave form display get dealt with by going back and forth between the two platforms?

    A: the waveform overlays are stored in separate,
    temporary files - *.ovm files or something, but my
    memory is fuzzy on that for now. The original audio
    files are not modified in any way.
    Hmmm... I've wondererd about this, too, and as best I can tell, Logic DOES modify the original files.
    I just imported some stereo interleaved AIF files into a project (with "copy external audio files to project folder" disabled), and I couldn't see any evidence of waveform creation--a disk search by date revealed nothing looking like waveform overviews, and there were no modifications to the AIF file dates.
    So... the next time I imported some AIF files, I checked the file sizes before the import...
    Sure enough, the files got bigger by about 100K after being imported into a Logic session, even though the file's timestamps were not changed.
    Looks like maybe Logic does write the waveforms into the files themselves ?
    On a related note, the manual suggests that it's possible to change the "copy external audio files to project folder" setting after creating a project, but I haven't found this anywhere other than File->New... anyone know ?
    Thanks!
    James
    [email protected]
    Dual 1.25 G4   Mac OS X (10.4.8)  

  • HT5177 How can two people edit the same FCPX file? One company, so both people/computers share the same license. Example: I work on revision A and my boss takes it and makes revision B and gives it back to me using two separate computers.

    How can two people edit the same FCPX file? One company, so both people/computers share the same license. Example: I work on revision A and my boss takes it and makes revision B and gives it back to me using two separate computers.

    Have the project, events and media on one drive which is common to both macs.
    You can download FCP X to both macs using the same Apple ID that it was purchased with.
    Andy

  • How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interrupti​on.

    I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
    So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
    Thank you in advance.
    Regards,
    Attachments:
    HP8563E_Query_Amplitude.vi ‏37 KB

    Hi,
    Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
    So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
    I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
    So I want to acquire 1 time amplitude from spectrum analyser each 5
    period of the signal that I am acquiring from parallel port.
    So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
    Here is a new algorithm.
    1) i=0 (counter: number of period)
    2) I read value from In Port
    3) If I acquire a period
    i= i+1 (another period)
    4) If i is multiple of 5 (If I read 5 period)
    acquire 1 time amplitude and write to the same
    file this amplitude and the corresponding distance
    Distance = 12*i). Remember each period of signal
    Corresponds to 12 Inches).i has to take these
    values: 5,10,15,20,25,35,40,45,50,55,60............
    5) Back to 2 if not stop.
    Thank you very much for helping me.
    Regards,
    Attachments:
    Acquire_Amplitude_00.vi ‏59 KB
    Figure_Algorithm.doc ‏26 KB

  • Multiple download of the same JAR file

    We have a collection of applets packaged in a single JAR file. Some users (web developers that use our applets) have been complaining that the applet is extremely slow to start up.
    When the html page includes more than one applet from the same JAR file then, "ONLY IN SOME CASES", the JAR file is downloaded multiple times.
    By capturing network traffic we can also think that the JAR file is downloaded even when accessing an image packaged in the applet's own JAR file.
    One further detail: this "DOES NOT OCCUR" when there is a fast connection to the server (or at leat it seems so). In these cases, the JAR file is downloaded once. It looks as if the problem only occurs on slower network connections.
    Thanks in advance for any help.

    Mmm... I don't think this is the solution... all the applets share a lot of classes (the big part of the JAR files).
    But my question is....: why in some cases the JAR is downloaded more than once???

Maybe you are looking for