The same SSID used at 3 sites and the same vlan for client IP assignment?

we are deploying 5508 controller and LW APs for wireless IP phone 7925G
Controller is installed at site A and there are APs and wireless phones at site B and C as well.
1. can I use the same SSID for all three sites for wireless phones? or have to use 3 distinct SSIDs?
2. If I can use the same SSID, can I associate one subnet e.g 10.10.131.0/24 for wireless IP phones at 3 sites? (our Cisco UCM is fine with this)
3. if I have use 3 distinct SSIDs, do I have to assign three subnets for IP phones at three sites?
thanks for the help!
Eric

yes.. this is done by HREAP mode.. the below link will help you out!!
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807cc3b8.shtml
That is, by default the WLAN will get pushed to all APs.. so if you have a single wlan then this will broadcast the SSID and the remotre site clients will connect to it..
Lemme know if this answered your question!!
Regards
Surendra

Similar Messages

  • I was registered on my mac, but now I'm using my windows site and couldn't download the software from the creative cloud

    So at first I started the student teacher edition on my Mac side, but now I'm using my windows site and trying to download it again from adobe creative cloud, but it only gave me the trial version. Now it has expired and I have no access to all my software. Help pls?

    I have the same issues.  I keep getting a "network error" even though my connections are fine.  I have installed Bootcamp fine on another Macbook, but am having major issues with my brand new one.  I have read the support forums where they say to keep trying because the servers are notoriously slow, but this seems a little ridiculous.  Hope I can get some help as well.
    Thanks!

  • Can I create a fillable pdf form and then export it for client use on my web site?

    Can I create a fillable pdf form and then export it for client use on my web site?  I need clients to be able to fill in the (registration) form on my site then submit it via email.

    [discussion moved to Creating, Editing & Exporting PDFs forum]

  • I have a voucher to be used on the app store, is there anyway I can use it to purchase and download Microsoft Office for Mac?

    I have a voucher to be used on the app store, is there anyway I can use it to purchase and download Microsoft Office for Mac?

    No, only for apps available on the App Store. Office is not one of them.

  • HT201251 I want to use 30  ipads to run kiosk software in my restaurant. Can I use one Apple ID (and one credit card) for all devices

    I want to use 30  ipads to run kiosk software in my restaurant. Can I use one Apple ID (and one credit card) for all devices?

    Alternatively you can always manage your iPads (does not matter how many) with a single apple id and all reporting to your account under "find my device" service. Keeping an eye on all your units. Additionally as you mentioned these are for your Restaurant you may find the solutions offered by this company who creates apps and hardware for this purpose: http://www.spartakioskpro.com
    Additionally if you expand beyond those 30 iPads to say 300 you will want to enable or plan on MDM as your best option to automate every ipad to use the same profile and app and ios configuration while also keeping a close eye on all of them via online MDM services like: https://meraki.cisco.com/products/systems-manager
    Here is a pic

  • I use iphone6 why iMovie and GarageBand not free for me?

    I use iphone6 why iMovie and GarageBand not free for me?

    How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
    http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
    Thanks to Texas Mac Man for the link

  • I'm currently using Adobe Acrobat X to create PDF portfolios for client deliverables. Within the portfolio, there is a "Files" view which can be seen below. I'm interested in knowing if it's possible to bulk import metadata into either the Description fie

    I'm currently using Adobe Acrobat X to create PDF portfolios for client deliverables. Within the portfolio, there is a "Files" view which can be seen below. I'm interested in knowing if it's possible to bulk import metadata into either the Description field or any user created field via a CSV, spreadsheet, etc. Thanks for any insight which can be given.

    I'm currently using Adobe Acrobat X to create PDF portfolios for client deliverables. Within the portfolio, there is a "Files" view which can be seen below. I'm interested in knowing if it's possible to bulk import metadata into either the Description field or any user created field via a CSV, spreadsheet, etc. Thanks for any insight which can be given.

  • How can I set the desktop image for client computers?

    How can I set the desktop image for client computers using ARD or terminal?

    How can I set the desktop image for client computers using ARD or terminal?

  • To the purchase of the complete offer "for clients CS" it does not recognize my number of series.as acount it recognizes to me but it does not make to make the purchase me. you can help me?

    to the purchase of the complete offer “for clients CS” it does not recognize my number of series.as acount it recognizes to me but it does not make to make the purchase me. you can help me?

    Hi there,
    This offer is only available to customers who own a Creative Suite edition or individual product in one of the following versions (CS3.x, CS4, or CS5.x, or CS6),  This offer is not available to Education, OEM, or volume licensing customers.
    See T&C here - http://www.adobe.com/offer-terms/cc_complete_offer.html
    ^Ani

  • Every since the June 22 security update, I get Mozilla Firefox (not responding) at any page I go to. Have to sit and wait several minutes for it to load each page. Getting all kinds of errors in arsing values. Declartion dropped. Etc.

    Warning: Expected declaration but found '*'. Skipped to next declaration.
    Source File: http://support.mozilla.com/media/css/questions-min.css?build=93872dd
    Line: 1
    Warning: Unknown property 'zoom'. Declaration dropped.
    Source File: http://support.mozilla.com/media/css/questions-min.css?build=93872dd
    Line: 1
    Warning: Error in parsing value for 'display'. Declaration dropped.
    Source File: http://support.mozilla.com/en-US/questions/new?product=beta
    Line: 0
    Warning: Unknown property '-moz-opacity'. Declaration dropped.
    Source File: http://support.mozilla.com/en-US/questions/new?product=beta
    Line: 0
    Warning: Error in parsing value for 'background-image'. Declaration dropped.
    Source File: http://support.mozilla.com/en-US/questions/new?product=beta
    Line: 0
    Just a few of the types of errors collected.
    It is getting to be a pain to have to sit and wait until it is responding again. At that point the cursor is locked on to what ever it is sitting over. You have to click on it to release it.
    Anyone have any ideas.

    Glad it is fixed. Thanks for posting back, (even if we are not sure exactly what happened).

  • I was using a chat site and cannot get to it agian. I can put in my username and press connect and then I get a message saying java unavailible or not installed

    I was using a chat  room and now I can't get back to it.  I can enter my username and press connect and then I get a message saying Java not availble or not installed

    Hi see if this has happened...
    Disabled Java in your Browser settings, not JavaScript.
    http://support.apple.com/kb/HT5241?viewlocale=en_US
    http://support.google.com/chrome/bin/answer.py?hl=en-GB&answer=142064
    http://support.mozilla.org/en-US/kb/How%20to%20turn%20off%20Java%20applets

  • Problem in using the enhancement SAPLV01Z for batch no assignment

    Hi,
    i am using the enhancement SAPLV01Z for using the user defined batch number.
    In which i am allowing the system to generate the internal batch number if it is newly created batch for that particular material,site and MRP combination.For this i am using the function module EXIT_SAPLV01Z_001 and if the batch is already available in ztable suppress the internal batch number generation.
    And by using the function module exit EXIT_SAPLV01Z_002 i am copying the already available batch and passing to the variable new_charge in that function module.
    every thing is OK. But the prob is system checking the availability of the batch for combination of materila and site in batch master table MCHA and throwing an error saying that no batch is found,enter batch.
    Now i want to skip the checking of MCHA table if it is already there in my ztable.For that i am implemented the OSS Note 1035372 but it is not working.
    And one variable call_vb_create i need to pass X for that i need access key.
    Can any body have solution with out using the access key..
    Thanks and regards
    anil

    Sorry I hadn't seen this question.
    I got the same issue today and used EXIT_SAPMM07M_010. It works fine.
    This user exit fix the issue

  • Problem in using the enhancement SAPLV01Z for batch no assignement in MIGO

    Hi,
    i am using the enhancement SAPLV01Z for using the user defined batch number.
    In which i am allowing the system to generate the internal batch number if it is newly created batch for that particular material,site and MRP combination.For this i am using the function module EXIT_SAPLV01Z_001 and if the batch is already available in ztable suppress the internal batch number generation.
    And by using the function module exit EXIT_SAPLV01Z_002 i am copying the already available batch and passing to the variable new_charge in that function module.
    every thing is OK. But the prob is system checking the availability of the batch for combination of materila and site in batch master table MCHA and throwing an error saying that no batch is found,enter batch.
    Now i want to skip the checking of MCHA table if it is already there in my ztable.For that i am implemented the OSS Note 1035372 but it is not working.
    And one variable call_vb_create i need to pass X for that i need access key.
    Can any body have solution with out using the access key..
    Thanks and regards
    anil

    Sorry I hadn't seen this question.
    I got the same issue today and used EXIT_SAPMM07M_010. It works fine.
    This user exit fix the issue

  • How do I configure a VPN Site and Subnets in Lync when clients have /32 Addresses?

    Hello,
    I've found a few people asking this question out in the "interwebs" but no one seems to quite answer their question (Those poor souls).
    In most occasions that I've seen, my customers have configured their VPN networks with a /24 (255.255.255.0) ip address.  However, when those clients connect to the VPN they are actually getting a /32 (255.255.255.255) address. 
    This seems to pose an issue for Lync reporting when it comes to configuring a VPN site and VPN subnets.
    (NOTE:You might ask why these customers are not going about best practice and using split-tunneling?  In this case, they absolutely CANNOT institute split-tunneling so all traffic MUST flow through the VPN tunnel.)
    For example sake, here is how I would imagine to setup a VPN site with subnets in Lync Network Configuration:
    VPN (Site)
        -172.16.33.0  /24 (Subnet)
        -172.16.34.0  /24 (Subnet)
        -172.16.35.0  /24 (Subnet)
    The problem is that when I run a Location Report in Lync to look at call data to/from the VPN site, it's not there. Reason being, the VPN client was given a /32 address which doesn't match up to the /24 I configured in Lync. 
    So, in my mind my options are:
    Create a /32 subnet for each single address corresponding to a VPN client and attach them to the VPN site (What a mess).
    Change the subnet mask for the 3 subnets I've defined to /32 instead of /24 and see what happens even though putting an IP address of 172.16.33.0 /32 doesn't make much sense.
    Remove the subnets and site from Lync because CAC and Bandwidth control are actually useless over VPN.
    Any thoughts on this?
    John K. Boslooper | Lync Technical Specialist | Project Leadership Associates
    Phone: 312.448.2269 | www.projectleadership.net

    Jin,
    /32 addresses are a valid subnet mask, however that means that a host with a IP Address of 192.168.23.4 and a subnet mask of 255.255.255.255 (/32) is the ONLY host on that subnet.
    The VPN configuration is correct.  The /32 mask is common with a Juniper VPN  (which is what they are using) and the DHCP server that is handing out the addresses is the Juniper VPN appliance. 
    They have already started working out a plan to use a different internal DHCP relay which should hand out the addresses correctly. 
    There has to be someone else out there with this issue or that can point out that i'm overlooking one key principal with VPN subnets.
    Anyone? 
    John K. Boslooper | Lync Technical Specialist | Project Leadership Associates Phone: 312.448.2269 | www.projectleadership.net

  • Configuring AD Sites and Services best practice for multiple office site ?

    Hi People,
    Can anyone here please suggest me or share the link of what is the best practice in configuring the AD Sites and Service for single AD domain with multiple office sites ?
    I'd like to know more about the number and the direction of the connection between Domain Controllers in one site to the Data Center and vice versa.
    Thanks.
    /* Server Support Specialist */

    Hi People,
    Can anyone here please suggest me or share the link of what is the best practice in configuring the AD Sites and Service for single AD domain with multiple office sites ?
    This series can be useful:
    Active Directory Structure Guidelines – Part 1
    Mahdi Tehrani   |  
      |  
    www.mahditehrani.ir
    Please click on Propose As Answer or to mark this post as
    and helpful for other people.
    This posting is provided AS-IS with no warranties, and confers no rights.
    How to query members of 'Local Administrators' group in all computers?

Maybe you are looking for

  • Lomboz and OC4J 10.3.1

    Hello, I am using Lomboz with OC4J 10.3.1. While trying to add a new module, I get the error that some OC4J libs doesn't exist. This libs are: adminclient.jar oc4j-internal.jar ojdbc14dms.jar soap.jar has anyone an idea where I can find these jar fil

  • Sending mail Problem (Urgent Please)

    The following program mail coding program. I am in local System. Host is my server. But our Server (norton) firewall is enabled. I am not able to send any mail. Will you please tell me How to recover this problem or alter my coding. If anybody knows

  • Hard to press 'D' key on new keyboard

    Hi, I just received one of the new keyboards today (couldn't find a keyboard category which is why i'm posting in the imac section). Unfortunately, the 'D' key is hard to press down. It seems like there are two mechanical pieces that press down under

  • I got an message while using a online course program that flash player had stopped working.

    The flashplayer works on everything else.  What should I do?

  • Logic crashes on entering 'controller assignments' window

    Hi, I hope someone can help me with this. When I want to enter the controller assignments window in the preferences menu, Logic Pro 7.1 crashes, telling me it will save the song I'm working on. I want to assign controllers to use my Novation ReMOTE S